- 11 Jun, 2014 30 commits
-
-
Michael Neuling authored
This patch enables POWER8 doorbell IPIs on powernv. Since doorbells can only IPI within a core, we test to see when we can use doorbells and if not we fall back to XICS. This also enables hypervisor doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit. Based on tests by Anton, the best case IPI latency between two threads dropped from 894ns to 512ns. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
Currently when entering fastsleep we clear all LPCR PECE bits. This patch changes it to only clear the decrementer bit (ie. PECE1), which is the only bit we really need to clear here. This is needed if we want to set other wakeup causes like the PECEDH bit so we can use hypervisor doorbells on powernv. Also we no longer clear the MER bit as it should never be set in the host anyway. Signed-off-by:
-
Gavin Shan authored
On PowerNV platform, EEH errors are reported by IO accessors or poller driven by interrupt. After the PE is isolated, we won't produce EEH event for the PE. The current implementation has possibility of EEH event lost in this way: The interrupt handler queues one "special" event, which drives the poller. EEH thread doesn't pick the special event yet. IO accessors kicks in, the frozen PE is marked as "isolated" and EEH event is queued to the list. EEH thread runs because of special event and purge all existing EEH events. However, we never produce an other EEH event for the frozen PE. Eventually, the PE is marked as "isolated" and we don't have EEH event to recover it. The patch fixes the issue to keep EEH events for PEs that have been marked as "isolated" with the help of additional "force" help to eeh_remove_event(). Reported-by:
Rolf Brudeseth <rolfb@us.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Paul Bolle authored
Commit b0d278b7 ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") added a check for CONFIG_PMAC were a check for CONFIG_PPC_PMAC was clearly intended. Fixes: b0d278b7 ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Paul Bolle authored
Commit cd64d169 ("powerpc: mtmsrd not defined") added a check for CONFIG_PPC_CPU were a check for CONFIG_PPC_FPU was clearly intended. Fixes: cd64d169 ("powerpc: mtmsrd not defined") Signed-off-by:
-
Gavin Shan authored
Commit cb5b242c ("powerpc/eeh: Escalate error on non-existing PE") escalates the frozen state on non-existing PE to fenced PHB. It was to improve kdump reliability. After that, commit 361f2a2a ("powrpc/powernv: Reset PHB in kdump kernel") was introduced to issue complete reset on all PHBs to increase the reliability of kdump kernel. Commit cb5b242c becomes unuseful and it would be reverted. Signed-off-by:
-
Gavin Shan authored
When we have the corner case of frozen parent and child PE at the same time, we have to handle the frozen parent PE prior to the child. Without clearning the frozen state on parent PE, the child PE can't be recovered successfully. The patch searches the EEH PE hierarchy tree and returns the toppest frozen PE to be handled. It ensures the frozen parent PE will be handled prior to child PE. Signed-off-by:
-
Gavin Shan authored
Since commit cb523e09 ("powerpc/eeh: Avoid I/O access during PE reset"), the PE is kept as frozen state on hardware level until the PE reset is done completely. After that, we explicitly clear the frozen state of the affected PE. However, there might have frozen child PEs of the affected PE and we also need clear their frozen state as well. Otherwise, the recovery is going to fail. Signed-off-by: -
Anton Blanchard authored
We've already dropped the default pseries timeout to 10s, do the same for powernv. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Kees Cook authored
This makes sure format strings cannot leak into printk (the string has already been correctly processed for format arguments). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Michael Ellerman authored
The Power8 Performance Monitor Unit (PMU) has a new feature called Event Based Branches (EBB). This commit adds tests of the kernel API for using EBBs. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
Allows us to kill the test and any children it has spawned. Signed-off-by:
-
Michael Ellerman authored
Signed-off-by:
-
Michael Ellerman authored
In commit 330a1eb7 "Core EBB support for 64-bit book3s" I messed up clear_task_ebb(). It clears some but not all of the task's Event Based Branch (EBB) registers when we duplicate a task struct. That allows a child task to observe the EBBHR & EBBRR of its parent, which it should not be able to do. Fix it by clearing EBBHR & EBBRR. Signed-off-by:
-
Joel Stanley authored
memory_return_from_buffer returns a signed value, so ret should be ssize_t. Fixes the following issue reported by David Binderman: [linux-3.15/arch/powerpc/platforms/powernv/opal-msglog.c:65]: (style) Checking if unsigned variable 'ret' is less than zero. [linux-3.15/arch/powerpc/platforms/powernv/opal-msglog.c:82]: (style) Checking if unsigned variable 'ret' is less than zero. Local variable "ret" is of type size_t. This is always unsigned, so it is pointless to check if it is less than zero. https://bugzilla.kernel.org/show_bug.cgi?id=77551 Fixing this exposes a real bug for the case where the entire count bytes is successfully read from the POS_WRAP case. The second memory_read_from_buffer will return EINVAL, causing the entire read to return EINVAL to userspace, despite the data being copied correctly. The fix is to test for the case where the data has been read and return early. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Dan Carpenter authored
The SPUFS_CNTL_MAP_SIZE define is cut and pasted twice so we can delete the second instance. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dan Carpenter authored
The FCC_GFMR_TTX define is cut and pasted twice so we can remove the second instance. Signed-off-by:
-
Guo Chao authored
EEH information fetched from OPAL need fix before using in LE environment. To be included in sparse's endian check, declare them as __beXX and access them by accessors. Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Guo Chao <yan@linux.vnet.ibm.com> Acked-by:
-
Anton Blanchard authored
The NX driver has endian issues so disable it for now. Signed-off-by:
-
Anton Blanchard authored
Everyone can write to these files, which is not what we want. Cc: stable@vger.kernel.org # 3.15 Signed-off-by:
-
Shreyas B. Prabhu authored
Build throws following errors when CONFIG_SMP=n arch/powerpc/platforms/powernv/subcore.c: In function ‘cpu_update_split_mode’: arch/powerpc/platforms/powernv/subcore.c:274:15: error: ‘setup_max_cpus’ undeclared (first use in this function) arch/powerpc/platforms/powernv/subcore.c:285:5: error: lvalue required as left operand of assignment 'setup_max_cpus' variable is relevant only on SMP, so there is no point working around it for UP. Furthermore, subcore itself is relevant only on SMP and hence the better solution is to exclude subcore.o and subcore-asm.o for UP builds. Signed-off-by:
Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
Shreyas B. Prabhu authored
Build throws following errors when CONFIG_SMP=n arch/powerpc/platforms/powernv/setup.c: In function ‘pnv_kexec_wait_secondaries_down’: arch/powerpc/platforms/powernv/setup.c:179:4: error: implicit declaration of function ‘get_hard_smp_processor_id’ rc = opal_query_cpu_status(get_hard_smp_processor_id(i), The usage of get_hard_smp_processor_id() needs the declaration from <asm/smp.h>. The file setup.c includes <linux/sched.h>, which in-turn includes <linux/smp.h>. However, <linux/smp.h> includes <asm/smp.h> only on SMP configs and hence UP builds fail. Fix this by directly including <asm/smp.h> in setup.c unconditionally. Reported-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Michael Neuling authored
OPAL will mark a CPU that is guarded as "bad" in the status property of the CPU node. Unfortunatley Linux doesn't check this property and will put the bad CPU in the present map. This has caused hangs on booting when we try to unsplit the core. This patch checks the CPU is avaliable via this status property before putting it in the present map. Signed-off-by:
-
Sam bobroff authored
Correct the DSCR SPR becoming temporarily corrupted if a task is context switched during a transaction. The problem occurs while suspending the task and is caused by saving the DSCR to thread.dscr after it has already been set to the CPU's default value: __switch_to() calls __switch_to_tm() which calls tm_reclaim_task() which calls tm_reclaim_thread() which calls tm_reclaim() where the DSCR is set to the CPU's default __switch_to() calls _switch() where thread.dscr is set to the DSCR When the task is resumed, it's transaction will be doomed (as usual) and the DSCR SPR will be corrupted, although the checkpointed value will be correct. Therefore the DSCR will be immediately corrected by the transaction aborting, unless it has been suspended. In that case the incorrect value can be seen by the task until it resumes the transaction. The fix is to treat the DSCR similarly to the TAR and save it early in __switch_to(). A program exposing the problem is added to the kernel self tests as: tools/testing/selftests/powerpc/tm/tm-resched-dscr. Signed-off-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> CC: <stable@vger.kernel.org> [v3.10+] Signed-off-by:
-
Michael Ellerman authored
__attribute__ ((unused)) WSP is the last user of CONFIG_PPC_A2, so we remove that as well. Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for any Book3E platform, so we can remove the code in mmu-book3e.h that depended on it. Signed-off-by:
-
Paul Bolle authored
The Kconfig symbol SERIAL_TEXT_DEBUG was removed from arch/powerpc/Kconfig.debug in v2.6.22. (In v2.6.27 it was also removed from arch/ppc/Kconfig.debug.) So the check for its macro has evaluated to false for over five years now. Remove that check and the few lines of code hidden behind it. Signed-off-by:
-
Benjamin Herrenschmidt authored
The Vector Crypto category instructions are supported by current POWER8 chips, advertise them to userspace using a specific bit to properly differentiate with chips of the same architecture level that might not have them. Signed-off-by: -
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: "This contains: - addition of the Intel MID watchdog - removal of W83697HF and W83697UG drivers (code was merged into w83627hf_wdt driver) - addition of Armada 375/380 SoC support - conversion of imx2_wdt to regmap API and to watchdog core API - lots of other small improvements and fixes" [ Wim was also tagged by gmail as a spammer, but not delayed by days unlike Ben ] * git://www.linux-watchdog.org/linux-watchdog: (25 commits) x86: intel-mid: add watchdog platform code for Merrifield watchdog: add Intel MID watchdog driver support watchdog: sp805: Set watchdog_device->timeout from ->set_timeout() booke/watchdog: refine and clean up the codes watchdog: iop_wdt only builds for mach-iop13xx watchdog: Remove drivers for W83697HF and W83697UG watchdog: w83627hf_wdt: Add early_disable module parameter ARM: mvebu: Add A375/A380 watchdog binding documentation watchdog: orion: Add Armada 375/380 SoC support watchdog: orion: Introduce per-SoC enabled() function watchdog: orion: Introduce per-SoC stop() function watchdog: orion: Remove unneeded atomic access watchdog: orion: Introduce a SoC-specific RSTOUT mapping watchdog: orion: Move the register ioremap'ing to its own function watchdog: xilinx: Make of_device_id array const watchdog: imx2_wdt: convert to watchdog core api watchdog: imx2_wdt: convert to use regmap API. watchdog: imx2_wdt: Sort the header files alphabetically watchdog: ath79_wdt: switch to clk_prepare/clk_disable watchdog: ath79_wdt: avoid spurious restarts on AR934x ... -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc updates from Ben Herrenschmidt: "Here is the bulk of the powerpc changes for this merge window. It got a bit delayed in part because I wasn't paying attention, and in part because I discovered I had a core PCI change without a PCI maintainer ack in it. Bjorn eventually agreed it was ok to merge it though we'll probably improve it later and I didn't want to rebase to add his ack. There is going to be a bit more next week, essentially fixes that I still want to sort through and test. The biggest item this time is the support to build the ppc64 LE kernel with our new v2 ABI. We previously supported v2 userspace but the kernel itself was a tougher nut to crack. This is now sorted mostly thanks to Anton and Rusty. We also have a fairly big series from Cedric that add support for 64-bit LE zImage boot wrapper. This was made harder by the fact that traditionally our zImage wrapper was always 32-bit, but our new LE toolchains don't really support 32-bit anymore (it's somewhat there but not really "supported") so we didn't want to rely on it. This meant more churn that just endian fixes. This brings some more LE bits as well, such as the ability to run in LE mode without a hypervisor (ie. under OPAL firmware) by doing the right OPAL call to reinitialize the CPU to take HV interrupts in the right mode and the usual pile of endian fixes. There's another series from Gavin adding EEH improvements (one day we *will* have a release with less than 20 EEH patches, I promise!). Another highlight is the support for the "Split core" functionality on P8 by Michael. This allows a P8 core to be split into "sub cores" of 4 threads which allows the subcores to run different guests under KVM (the HW still doesn't support a partition per thread). And then the usual misc bits and fixes ..." [ Further delayed by gmail deciding that BenH is a dirty spammer. Google knows. ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits) powerpc/powernv: Add missing include to LPC code selftests/powerpc: Test the THP bug we fixed in the previous commit powerpc/mm: Check paca psize is up to date for huge mappings powerpc/powernv: Pass buffer size to OPAL validate flash call powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC() powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC() powerpc/powernv: Set memory_block_size_bytes to 256MB powerpc: Allow ppc_md platform hook to override memory_block_size_bytes powerpc/powernv: Fix endian issues in memory error handling code powerpc/eeh: Skip eeh sysfs when eeh is disabled powerpc: 64bit sendfile is capped at 2GB powerpc/powernv: Provide debugfs access to the LPC bus via OPAL powerpc/serial: Use saner flags when creating legacy ports powerpc: Add cpu family documentation powerpc/xmon: Fix up xmon format strings powerpc/powernv: Add calls to support little endian host powerpc: Document sysfs DSCR interface powerpc: Fix regression of per-CPU DSCR setting powerpc: Split __SYSFS_SPRSETUP macro arch: powerpc/fadump: Cleaning up inconsistent NULL checks ...
-
- 10 Jun, 2014 10 commits
-
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Matthew Garrett: "Very little of excitement here - the most significant is a new driver for detecting device freefall on Dells, other than that it's pretty much entirely minor fixes for specific machines" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: hp-wmi: Enable hotkeys on some systems thinkpad_acpi: Add mappings for F9 - F12 hotkeys on X240 / T440 / T540 platform: x86: dell-smo8800: Dell Latitude freefall driver (ACPI SMO8800/SMO8810) ideapad_laptop: Introduce the use of the managed version of kzalloc platform/x86: Fix run-time dependencies of OLPC drivers platform: x86: asus-wmi.c: Cleaning up uninitialized variables ix86/mid/thermal: Introduce the use of the managed version of kzalloc platform x86 Kconfig: Refer to the laptop list in the Compal driver help Documentation: Add list of laptop models supported by the Compal driver ideapad-laptop: Blacklist rfkill control on the Lenovo Yoga 2 11 asus-wmi: Set WAPF to 4 for Asus X550CA alienware-wmi: For WMAX HDMI method, introduce a way to query HDMI cable status alienware-wmi: Update WMAX brightness method limit to 15 pvpanic: Set high notifier priority platform/x86: samsung-laptop: Add support for Samsung's NP7[34]0U3E models. toshiba_acpi: Add alternative keymap support for Satellite M840 platform-drivers-x86: intel_pmic_gpio: Fix off-by-one valid offset range check
-
Kyle Evans authored
This is a third attempt to enable these buttons. The new variable being commit 997daa1b (i.e. hp-wmi: detect "2009 BIOS or later"). Older systems that do not have the 2009 BIOS query method respond with a dummy value, in this case 4. Using that, we can target a fairly narrow group of systems. i.e. old enough to not have HPWMI_FEATURE_QUERY 0xd, but new enough to have HPWMI_BIOS_QUERY 0x9. This group may be further limited if some systems respond with something other than 4 to non-existant feature queries. Signed-off-by:
Kyle Evans <kvans32@gmail.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com>
-
Hans de Goede authored
The T440s user guide says that when Fn-lock is not active, the *40s' F9 - F12 keys should be mapped to: control-panel, search, show-all-windows and Computer. These keys generate the sofar unused 28 - 31 hotkey scancodes. For the first 2 this nicely matches the icons on the keys, for the latter 2 the icons are somewhat creative, which is why I ended up looking them up in the user manual. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Pali Rohár authored
This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which can be found on Dell Latitude laptops. Driver register /dev/freefall misc device which has same interface as driver hp_accel freefall driver. So any existing applications for HP freefall sensor /dev/freefall will work for with this new driver for Dell Latitude laptops too. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Cc: Sonal Santan <sonal.santan@gmail.com> Tested-By:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-By:
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The label sysfs_failed is removed as it is no longer required. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by:Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Jean Delvare authored
Let the xo15-ebook driver depend on OLPC as all other OLPC drivers already do. Add COMPILE_TEST as an alternative for both xo1-rfkill and xo15-ebook, to increase the build testing coverage. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Rickard Strandqvist authored
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Himangi Saraogi authored
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The following Coccinelle semantic patch was used for making the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: -
Ismael Luceno authored
Signed-off-by:
Ismael Luceno <ismael.luceno@gmail.com> Signed-off-by:
-
Ismael Luceno authored
Signed-off-by:
-
