- 20 May, 2010 30 commits
-
-
Johan Hovold authored
Increase the bulk-out buffer size from 64 to 256 byte. This gives a significant increase in throughput already at 1Mbaud (e.g. 710 instead of 640 KB/s) as well as lowered CPU usage. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Johan Hovold authored
Allow drivers to define custom bulk in/out buffer sizes in struct usb_serial_driver. If not set, fall back to the default buffer size which matches the endpoint size. Three drivers are currently freeing the pre-allocated buffers and allocating larger ones to achieve this at port probe (ftdi_sio) or even at port open (ipaq and iuu_phoenix), which needless to say is suboptimal. Signed-off-by:
-
Hans de Goede authored
Add a new quirk USB_QUIRK_HONOR_BNUMINTERFACES, when this quirk is set and a device has more interface descriptors in a configuration then it claims to have in config->bNumInterfaces, ignore all additional interfaces. This is needed for devices which try to hide unused interfaces by only lowering config->bNumInterfaces, and which can't handle if you try to talk to the "hidden" interfaces. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Randy Dunlap authored
Fix build error when CONFIG_MAGIC_SYSRQ is not enabled: drivers/usb/serial/generic.c:566: error: implicit declaration of function 'handle_sysrq' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Vijay Kumar authored
Add ZIO Motherboard USB serial interface driver. Signed-off-by:
Vijay Kumar B. <vijaykumar@zilogic.com> Signed-off-by:
-
Jason Wessel authored
The usb console code has had a long standing problem of not being able to pass the baud rate from the kernel argument console=ttyUSB0,BAUD down to the initial tty open, unless you were willing to settle for 9600 baud. The solution is to directly use tty_init_termios() in usb_console_setup() as this will preserve any changes to the initial termios setting on future opens. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Michal Nazarewicz authored
"Static" buffers in fsg_buffhd structure (ie. fields which are arrays rather then pointers to dynamically allocated memory) are not aligned to any "big" power of two which may lead to poor DMA performance (copying "by hand" of head or tail) or no DMA at all even if otherwise hardware supports it. Therefore, this patch makes mass storage function use kmalloc()ed buffers which are (because of their size) page aligned (which should be enough for any hardware). Signed-off-by:
Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Felipe Balbi authored
... and simplify the was we read/write from/to DMA COUNT register. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Felipe Balbi authored
we can support the musb-specific test modes on the vendor specific range of test selector as stated on USB Specification Table 9-7 Test Mode Selectors. Signed-off-by:
-
Felipe Balbi authored
for now only a simple register dump entry (which can be rather useful on debugging) and a way to start test modes. Signed-off-by:
-
Cliff Cai authored
Rather than hardcoding the gpio levels for vrsel, allow the platform resources to handle this so boards can be active high or low. Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Maulik Mankad authored
This patch adds CONFIG_ARCH_OMAP4 macro within MUSB driver. Signed-off-by:
Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by:
-
Maulik Mankad authored
This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4. Signed-off-by:
-
Maulik Mankad authored
Program the OTG_INTERFSEL register based on transcevier type passed from board file. Adapt signature of musb_platform_init() function for davinci, blackfin and tusb6010. Signed-off-by:
-
Felipe Balbi authored
boards might want to optimize their fifo configuration to the particular needs of that specific board. Allow that by moving all related data structures to <linux/usb/musb.h> Signed-off-by:
-
Jason Wessel authored
Replace all instances of using the console variable in struct usb_serial_port with the struct tty_port version. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Manuel Lauss authored
I've been running variations of this patch for well over a year now; my usual zoo of test devices didn't trigger any ill effects even under heavy load. As a nice sideeffect idle-wakeups are reduced from 20/s to about 2/s (EHCI hub with mouse and kbd). Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
-
Alan Stern authored
This patch (as1350) removes all usages of coherent buffers for USB control-request setup-packet buffers. There's no good reason to reserve coherent memory for these things; control requests are hardly ever used in large quantity (the major exception is firmware transfers, and they aren't time-critical). Furthermore, only seven drivers used it. We might as well always use streaming DMA mappings for setup-packet buffers, and remove some extra complexity from usbcore. The DMA-mapping portion of hcd.c is currently in flux. A separate patch will be submitted to remove support for URB_NO_SETUP_DMA_MAP after everything else settles down. The removal should go smoothly, as by then nobody will be using it. Signed-off-by:
-
Alan Stern authored
This patch (as1349b) clears up the confusion in many USB host controller drivers between port features and port statuses. In mosty cases it's true that the status bit is in the position given by the corresponding feature value, but that's not always true and it's not guaranteed in the USB spec. There's no functional change, just replacing expressions of the form (1 << USB_PORT_FEAT_x) with USB_PORT_STAT_x, which has the same value. Signed-off-by:
-
Alan Stern authored
This patch (as1348) removes the bogus USB_PORT_FEAT_{HIGHSPEED,SUPERSPEED} symbols from ch11.h. No such features are defined by the USB spec. (There is a PORT_LOWSPEED feature, but the spec doesn't mention it except to say that host software should never use it.) The speed indicators are port statuses, not port features. As a temporary workaround for the xhci-hcd driver, a fictional USB_PORT_STAT_SUPER_SPEED symbol is added. Signed-off-by: -
Huang Weiyi authored
Remove duplicated #include('s) in drivers/usb/core/hcd.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Ian Munsie authored
The compiler throws the following warning when compiling for a PowerPC 64 bit machine: drivers/usb/storage/isd200.c:580: warning: the frame size of 2208 bytes is larger than 2048 bytes There is a struct scsi_device which is placed on the stack and is largely responsible for such wastage. The struct is just a dummy struct filled with NULLs and set as the scsi_cmnd->device to make the usb_stor_Bulk_transport function happy. This patch makes the struct static, so that it is never placed onto the stack and silences the compiler warning. Signed-off-by:
Ian Munsie <imunsie@au.ibm.com> Signed-off-by:
-
Randy Dunlap authored
Fix usb/class sparse warnings: drivers/usb/class/cdc-acm.h:128:34: error: dubious one-bit signed bitfield drivers/usb/class/cdc-acm.h:129:24: error: dubious one-bit signed bitfield Signed-off-by:
-
Alessio Igor Bogani authored
Seems to me that BKL is not needed here because necessary locking is already provided by mutex sisusb->lock. Also change the returned value to long. Signed-off-by:
Alessio Igor Bogani <abogani@texware.it> Signed-off-by:
-
Eric Lescouet authored
Base on inputs from Alan Stern, split the hub.h header into: - new ch11.h header (most of it) containing constants and structures from chapter 11 of the USB 2.0 spec. - a small remaining part being merged into hcd.h. Signed-of-by:
Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Eric Lescouet authored
The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hub.h from drivers/usb/core into include/linux/usb/ Signed-of-by:
-
Eric Lescouet authored
The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by:
-
Sarah Sharp authored
The length of the scatter gather list a driver can enqueue is limited by the bus' sg_tablesize to 62 entries. Each entry will be described by at least one transfer request block (TRB). If the entry's buffer crosses a 64KB boundary, then that entry will have to be described by two or more TRBs. So even if the USB device driver respects sg_tablesize, the whole scatter list may take more than 62 TRBs to describe, and won't fit on the ring. Don't assume that an empty ring means there is enough room on the transfer ring. The old code would unconditionally queue this too-large transfer, and over write the beginning of the transfer. This would mean the cycle bit was unchanged in those overwritten transfers, causing the hardware to think it didn't own the TRBs, and the host would seem to hang. Now drivers may see submit_urb() fail with -ENOMEM if the transfers are too big to fit on the ring. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Sarah Sharp authored
When a scatter-gather list is enqueued to the xHCI driver, it translates each entry into a transfer request block (TRB). Only 63 TRBs can be used per ring segment, and there must be one additional TRB reserved to make sure the hardware does not think the ring is empty (so the enqueue pointer doesn't equal the dequeue pointer). Limit the bus sg_tablesize to 62 TRBs. Signed-off-by:
-
Sarah Sharp authored
When the USB core installs a new interface, it unconditionally clears the halts on all the endpoints on the new interface. Usually the xHCI host needs to know when an endpoint is reset, so it can change its internal endpoint state. In this case, it doesn't care, because the endpoints were never halted in the first place. To avoid issuing a redundant Reset Endpoint command, the xHCI driver looks at xhci_virt_ep->stopped_td to determine if the endpoint was actually halted. However, the functions that handle the stall never set that variable to NULL after it dealt with the stall. So if an endpoint stalled and a Reset Endpoint command completed, and then the class driver tried to install a new alternate setting, the xHCI driver would access the old xhci_virt_ep->stopped_td pointer. A similar problem occurs if the endpoint has been stopped to cancel a transfer. Signed-off-by:
-
- 16 May, 2010 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: rtnetlink: make SR-IOV VF interface symmetric sctp: delete active ICMP proto unreachable timer when free transport tcp: fix MD5 (RFC2385) support
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Oprofile: Fix Loongson irq handler MIPS: N32: Use compat version for sys_ppoll. MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1
-
Chris Wright authored
Now we have a set of nested attributes: IFLA_VFINFO_LIST (NESTED) IFLA_VF_INFO (NESTED) IFLA_VF_MAC IFLA_VF_VLAN IFLA_VF_TX_RATE This allows a single set to operate on multiple attributes if desired. Among other things, it means a dump can be replayed to set state. The current interface has yet to be released, so this seems like something to consider for 2.6.34. Signed-off-by:Chris Wright <chrisw@sous-sol.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
transport may be free before ICMP proto unreachable timer expire, so we should delete active ICMP proto unreachable timer when transport is going away. Signed-off-by:
Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Eric Dumazet authored
TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by:
Bhaskar Dutta <bhaskie@gmail.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
- 15 May, 2010 4 commits
-
-
Wu Zhangjin authored
The interrupt enable bit for the performance counters is in the Control Register $24, not in the counter register. loongson2_perfcount_handler(), we need to use Reported-by:Xu Hengyang <hengyang@mail.ustc.edu.cn> Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1198/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> ---
-
Chandrakala Chavva authored
The sys_ppoll() takes struct 'struct timespec'. This is different for the N32 and N64 ABIs. Use the compat version to do the proper conversions. Signed-off-by:David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1210/Signed-off-by:
-
Shane McDonald authored
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by:Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check for read permission on src file in the clone ioctl
-
