- 08 May, 2019 40 commits
-
-
Mike Kravetz authored
[ Upstream commit 58b6e5e8 ] When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked. Programs to reproduce: mount -t hugetlbfs nodev hugetlbfs mknod hugetlbfs/dev b 0 0 exec 30<> hugetlbfs/dev umount hugetlbfs/ resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations. Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Reported-by:
Yufen Yu <yuyufen@huawei.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yonglong Liu authored
[ Upstream commit 8601a99d ] When enable SMMU, remove HNS driver will cause a WARNING: [ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8 [ 141.954673] Modules linked in: hns_enet_drv(-) [ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32 [ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017 [ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO) [ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8 [ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8 [ 142.027066] sp : ffff000013533b90 [ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600 [ 142.044420] x27: 0000000000000000 x26: 0000000000000000 [ 142.055113] x25: 0000000056000000 x24: 0000000000000015 [ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68 [ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000 [ 142.087192] x19: 0000000000001000 x18: 0000000000000007 [ 142.097885] x17: 000000000000000e x16: 0000000000000001 [ 142.108578] x15: 0000000000000019 x14: 363139343a70616d [ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000 [ 142.129963] x11: 00000000ffffffff x10: 0000000000000006 [ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0 [ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8 [ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000 [ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500 [ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035 [ 142.194120] Call trace: [ 142.199030] __iommu_dma_unmap+0xc0/0xc8 [ 142.206920] iommu_dma_unmap_page+0x20/0x28 [ 142.215335] __iommu_unmap_page+0x40/0x60 [ 142.223399] hnae_unmap_buffer+0x110/0x134 [ 142.231639] hnae_free_desc+0x6c/0x10c [ 142.239177] hnae_fini_ring+0x14/0x34 [ 142.246540] hnae_fini_queue+0x2c/0x40 [ 142.254080] hnae_put_handle+0x38/0xcc [ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv] [ 142.272312] platform_drv_remove+0x24/0x64 [ 142.280552] device_release_driver_internal+0x17c/0x20c [ 142.291070] driver_detach+0x4c/0x90 [ 142.298259] bus_remove_driver+0x5c/0xd8 [ 142.306148] driver_unregister+0x2c/0x54 [ 142.314037] platform_driver_unregister+0x10/0x18 [ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv] [ 142.335248] __arm64_sys_delete_module+0x214/0x25c [ 142.344891] el0_svc_common+0xb0/0x10c [ 142.352430] el0_svc_handler+0x24/0x80 [ 142.359968] el0_svc+0x8/0x7c0 [ 142.366104] ---[ end trace 60ad1cd58e63c407 ]--- The tx ring buffer map when xmit and unmap when xmit done. So in hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring() have a unmap operation for tx ring buffer, which is already unmapped when xmit done, than cause this WARNING. The hnae_alloc_buffers() is called in hnae_init_ring(), so the hnae_free_buffers() should be in hnae_fini_ring(), not in hnae_free_desc(). In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring(). When the ring buffer is tx ring, adds a piece of code to ensure that the tx ring is unmap. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit acb1ce15 ] When the HNS driver loaded, always have an error print: "netif_napi_add() called with weight 256" This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64. So use NAPI_POLL_WEIGHT to fix it. Signed-off-by:
-
Liubin Shu authored
[ Upstream commit 3a39a12a ] This patch is trying to fix the issue due to: [27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv] After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be interrupted by interruptions, and than call hns_nic_tx_poll_one() to handle the new packets, and free the skb. So, when turn back to hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free. This patch update tx ring statistics in hns_nic_tx_poll_one() to fix the bug. Signed-off-by:
Liubin Shu <shuliubin@huawei.com> Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by:
-
Michael Kelley authored
[ Upstream commit 382e06d1 ] When the number of sub-channels offered by Hyper-V is >= the number of CPUs in the VM, calculate the correct number of sub-channels. The current code produces one too many. This scenario arises only when the number of CPUs is artificially restricted (for example, with maxcpus=<n> on the kernel boot line), because Hyper-V normally offers a sub-channel count < number of CPUs. While the current code doesn't break, the extra sub-channel is unbalanced across the CPUs (for example, a total of 5 channels on a VM with 4 CPUs). Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit 1cb1d2c6 ] Blacklist "Universal Xport" LUN. It's used for in-band storage array management. Also add model to the rdac dh family. Cc: Martin Wilck <mwilck@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Louis Taylor authored
[ Upstream commit 426b046b ] When compiling with -Wformat, clang emits the following warnings: drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:
Louis Taylor <louis@kragniz.eu> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 882c5e55 ] The DA9063AD doesn't support alarms on any seconds and its granularity is the minute. Set uie_unsupported in that case. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 93b919da ] symlink body shouldn't be freed without an RCU delay. Switch debugfs to ->destroy_inode() and use of call_rcu(); free both the inode and symlink body in the callback. Similar to solution for bpf, only here it's even more obvious that ->evict_inode() can be dropped. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
[ Upstream commit 4fdcfab5 ] free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 057a0c56 ] This is log is harmful as it can trigger multiple times per packet. Delete it. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 8ac0c24f ] Packets without the last descriptor set should be dropped early. If we receive a frame larger than the DMA buffer, the HW will continue using the next descriptor. Driver mistakes these as individual frames, and sometimes a truncated frame (without the LD set) may look like a valid packet. This fixes a strange issue where the system replies to 4098-byte ping although the MTU/DMA buffer size is set to 4096, and yet at the same time it's logging an oversized packet. Signed-off-by:
-
Aaro Koskinen authored
[ Upstream commit 1b746ce8 ] If we have error bits set, the discard_frame status will get overwritten by checksum bit checks, which might set the status back to good one. Fix by checking the COE status only if the frame is good. Signed-off-by:
-
Konstantin Khorenko authored
[ Upstream commit 18bebc6d ] Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example. # cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80 So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well. Signed-off-by:
Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by:
-
Omri Kahalon authored
[ Upstream commit eca4a928 ] Traditionally, the PF (Physical Function) which resides on vport 0 was the E-switch manager. Since the ECPF (Embedded CPU Physical Function), which resides on vport 0xfffe, was introduced as the E-Switch manager, the assumption that the E-switch manager is on vport 0 is incorrect. Since the eswitch code already uses the actual vport value, all we need is to always set other_vport=1. Signed-off-by:
Omri Kahalon <omrik@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit dabb8338 ] The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by:
Arvind Sankar <niveditas98@gmail.com> Reviewed-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit f131a568 ] The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 7683fdc1 ("batman-adv: protect the local and the global trans-tables with rcu") Reported-by:
Martin Weinelt <martin@linuxlounge.net> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Acked-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 3d65b9ac ] The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_local_remove is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: ef72706a ("batman-adv: protect tt_local_entry from concurrent delete events") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 4ba104f4 ] The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 15d82d22 ] When no alarm has been programmed on RSK-RZA1, an error message is printed during boot: rtc rtc0: invalid alarm value: 2019-03-14T255:255:255 sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm field that is not enabled. __rtc_read_alarm() validates the received alarm values, and fills in missing fields when needed. While 0xff is handled fine for the year, month, and day fields, and corrected as considered being out-of-range, this is not the case for the hour, minute, and second fields, where -1 is expected for missing fields. Fix this by returning -1 instead, as this value is handled fine for all fields. Signed-off-by:
-
He, Bo authored
[ Upstream commit cef0d494 ] There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference: BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc. [jkosina@suse.cz: update changelog a bit] Signed-off-by:
he, bo <bo.he@intel.com> Signed-off-by:
"Zhang, Jun" <jun.zhang@intel.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 6c44b15e ] create_singlethread_workqueue may fail and return NULL. The fix checks if it is NULL to avoid NULL pointer dereference. Also, the fix moves the call of create_singlethread_workqueue earlier to avoid resource-release issues. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit d11de63f ] After commit 4d43d395 (workqueue: Try to catch flush_work() without INIT_WORK()), it can cause warning when delete nvme-loop device, trace like: [ 76.601272] Call Trace: [ 76.601646] ? del_timer+0x72/0xa0 [ 76.602156] __cancel_work_timer+0x1ae/0x270 [ 76.602791] cancel_work_sync+0x14/0x20 [ 76.603407] nvmet_ctrl_free+0x1b7/0x2f0 [nvmet] [ 76.604091] ? free_percpu+0x168/0x300 [ 76.604652] nvmet_sq_destroy+0x106/0x240 [nvmet] [ 76.605346] nvme_loop_destroy_admin_queue+0x30/0x60 [nvme_loop] [ 76.606220] nvme_loop_shutdown_ctrl+0xc3/0xf0 [nvme_loop] [ 76.607026] nvme_loop_delete_ctrl_host+0x19/0x30 [nvme_loop] [ 76.607871] nvme_do_delete_ctrl+0x75/0xb0 [ 76.608477] nvme_sysfs_delete+0x7d/0xc0 [ 76.609057] dev_attr_store+0x24/0x40 [ 76.609603] sysfs_kf_write+0x4c/0x60 [ 76.610144] kernfs_fop_write+0x19a/0x260 [ 76.610742] __vfs_write+0x1c/0x60 [ 76.611246] vfs_write+0xfa/0x280 [ 76.611739] ksys_write+0x6e/0x120 [ 76.612238] __x64_sys_write+0x1e/0x30 [ 76.612787] do_syscall_64+0xbf/0x3a0 [ 76.613329] entry_SYSCALL_64_after_hwframe+0x44/0xa9 We fix it by moving fatal_err_work init to nvmet_alloc_ctrl(), which may more reasonable. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Alan Stern authored
commit c2b71462 upstream. The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active: URB 0000000031fb463e submitted while active WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363 The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface. Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound. This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation! As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative. It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alan Stern authored
commit c01c348e upstream. Some drivers (such as the vub300 MMC driver) expect usb_string() to return a properly NUL-terminated string, even when an error occurs. (In fact, vub300's probe routine doesn't bother to check the return code from usb_string().) When the driver goes on to use an unterminated string, it leads to kernel errors such as stack-out-of-bounds, as found by the syzkaller USB fuzzer. An out-of-range string index argument is not at all unlikely, given that some devices don't provide string descriptors and therefore list 0 as the value for their string indexes. This patch makes usb_string() return a properly terminated empty string along with the -EINVAL error code when an out-of-range index is encountered. And since a USB string index is a single-byte value, indexes >= 256 are just as invalid as values of 0 or below. Signed-off-by:
-
Malte Leip authored
commit c409ca3b upstream. Change the validation of number_of_packets in get_pipe to compare the number of packets to a fixed maximum number of packets allowed, set to be 1024. This number was chosen due to it being used by other drivers as well, for example drivers/usb/host/uhci-q.c Background/reason: The get_pipe function in stub_rx.c validates the number of packets in isochronous mode and aborts with an error if that number is too large, in order to prevent malicious input from possibly triggering large memory allocations. This was previously done by checking whether pdu->u.cmd_submit.number_of_packets is bigger than the number of packets that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes if all except possibly the last packet had maximum length, given by usb_endpoint_maxp(epd) * usb_endpoint_maxp_mult(epd). This leads to an error if URBs with packets shorter than the maximum possible length are submitted, which is allowed according to Documentation/driver-api/usb/URB.rst and occurs for example with the snd-usb-audio driver. Fixes: c6688ef9 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") Signed-off-by:
Malte Leip <malte@leip.net> Cc: stable <stable@vger.kernel.org> Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Alan Stern authored
commit c114944d upstream. The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the ds2490 driver. This bug is caused by improper use of the altsetting array in the usb_interface structure (the array's entries are not always stored in numerical order), combined with a naive assumption that all interfaces probed by the driver will have the expected number of altsettings. The bug can be fixed by replacing references to the possibly non-existent intf->altsetting[alt] entry with the guaranteed-to-exist intf->cur_altsetting entry. Signed-off-by:
-
Alan Stern authored
commit ef61eb43 upstream. The syzkaller USB fuzzer found a general-protection-fault bug in the yurex driver. The fault occurs when a device has been unplugged; the driver's interrupt-URB handler logs an error message referring to the device by name, after the device has been unregistered and its name deallocated. This problem is caused by the fact that the interrupt URB isn't cancelled until the driver's private data structure is released, which can happen long after the device is gone. The cure is to make sure that the interrupt URB is killed before yurex_disconnect() returns; this is exactly the sort of thing that usb_poison_urb() was meant for. Signed-off-by:
-
Arnd Bergmann authored
commit ce628966 upstream. When CONFIG_KASAN is set, we can use relatively large amounts of kernel stack space: net/caif/cfctrl.c:555:1: warning: the frame size of 1600 bytes is larger than 1280 bytes [-Wframe-larger-than=] This adds convenience wrappers around cfpkt_extr_head(), which is responsible for most of the stack growth. With those wrapper functions, gcc apparently starts reusing the stack slots for each instance, thus avoiding the problem. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Kristina Martsenko authored
commit bf396c09 upstream. When we take a fault from EL0 that can't be handled, we print out the page table entries associated with the faulting address. This allows userspace to print out any current page table entries, including kernel (TTBR1) entries. Exposing kernel mappings like this could pose a security risk, so don't print out page table information on EL0 faults. (But still print it out for EL1 faults.) This also follows the same behaviour as x86, printing out page table entries on kernel mode faults but not user mode faults. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Kristina Martsenko authored
commit 67ce16ec upstream. When we take a fault that can't be handled, we print out the page table entries associated with the faulting address. In some cases we currently print out the wrong entries. For a faulting TTBR1 address, we sometimes print out TTBR0 table entries instead, and for a faulting TTBR0 address we sometimes print out TTBR1 table entries. Fix this by choosing the tables based on the faulting address. Acked-by:
-
Andrey Konovalov authored
commit 69ca372c upstream. A compiler can optimize away memset calls by replacing them with mov instructions. There are KASAN tests that specifically test that KASAN correctly handles memset calls so we don't want this optimization to happen. The solution is to add -fno-builtin flag to test_kasan.ko Link: http://lkml.kernel.org/r/105ec9a308b2abedb1a0d1fdced0c22d765e4732.1519924383.git.andreyknvl@google.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Chris Mason <clm@fb.com> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof@kernel.org> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Cc: Kostya Serebryany <kcc@google.com> Signed-off-by:
-
Will Deacon authored
commit 2ce77f6d upstream. When KASAN is enabled, the swapper page table contains many identical mappings of the zero page, which can lead to a stall during boot whilst the G -> nG code continually walks the same page table entries looking for global mappings. This patch sets the nG bit (bit 11, which is IGNORED) in table entries after processing the subtree so we can easily skip them if we see them a second time. Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Colin Ian King authored
commit 48c23239 upstream. Variable real_size is initialized with a value that is never read, it is re-assigned a new value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: lib/test_kasan.c:422:21: warning: Value stored to 'real_size' during its initialization is never read Link: http://lkml.kernel.org/r/20180206144950.32457-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Arnd Bergmann authored
commit e7701557 upstream. gcc-7 produces this warning: mm/kasan/report.c: In function 'kasan_report': mm/kasan/report.c:351:3: error: 'info.first_bad_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] print_shadow_for_address(info->first_bad_addr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/kasan/report.c:360:27: note: 'info.first_bad_addr' was declared here The code seems fine as we only print info.first_bad_addr when there is a shadow, and we always initialize it in that case, but this is relatively hard for gcc to figure out after the latest rework. Adding an intialization to the most likely value together with the other struct members shuts up that warning. Fixes: b235b9808664 ("kasan: unify report headers") Link: https://patchwork.kernel.org/patch/9641417/ Link: http://lkml.kernel.org/r/20170725152739.4176967-1-arnd@arndb.deSigned-off-by:
Alexander Potapenko <glider@google.com> Suggested-by:
-
Masami Hiramatsu authored
commit 5be9b730 upstream. Add a prototype of task_struct to fix below warning on arm64. In file included from arch/arm64/kernel/probes/kprobes.c:19:0: include/linux/kasan.h:81:132: error: 'struct task_struct' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] static inline void kasan_unpoison_task_stack(struct task_struct *task) {} As same as other types (kmem_cache, page, and vm_struct) this adds a prototype of task_struct data structure on top of kasan.h. [arnd] A related warning was fixed before, but now appears in a different line in the same file in v4.11-rc2. The patch from Masami Hiramatsu still seems appropriate, so let's take his version. Fixes: 71af2ed5 ("kasan, sched/headers: Remove <linux/sched.h> from <linux/kasan.h>") Link: https://patchwork.kernel.org/patch/9569839/ Link: http://lkml.kernel.org/r/20170313141517.3397802-1-arnd@arndb.deSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
-
Mark Rutland authored
commit b0de0ccc upstream. Booting a v4.11-rc1 kernel with DEBUG_VIRTUAL and KASAN enabled produces the following splat (trimmed for brevity): [ 0.000000] virt_to_phys used for non-linear address: ffff200008080000 (0xffff200008080000) [ 0.000000] WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:14 __virt_to_phys+0x48/0x70 [ 0.000000] PC is at __virt_to_phys+0x48/0x70 [ 0.000000] LR is at __virt_to_phys+0x48/0x70 [ 0.000000] Call trace: [ 0.000000] [<ffff2000080b1ac0>] __virt_to_phys+0x48/0x70 [ 0.000000] [<ffff20000a03b86c>] kasan_init+0x1c0/0x498 [ 0.000000] [<ffff20000a034018>] setup_arch+0x2fc/0x948 [ 0.000000] [<ffff20000a030c68>] start_kernel+0xb8/0x570 [ 0.000000] [<ffff20000a0301e8>] __primary_switched+0x6c/0x74 This is because we use virt_to_pfn() on a kernel image address when trying to figure out its nid, so that we can allocate its shadow from the same node. As with other recent changes, this patch uses lm_alias() to solve this. We could instead use NUMA_NO_NODE, as x86 does for all shadow allocations, though we'll likely want the "real" memory shadow to be backed from its corresponding nid anyway, so we may as well be consistent and find the nid for the image shadow. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 84936118 upstream. There are a handful of callers to save_stack_trace_tsk() and show_stack() which try to unwind the stack of a task other than current. In such cases, it's remotely possible that the task is running on one CPU while the unwinder is reading its stack from another CPU, causing the unwinder to see stack corruption. These cases seem to be mostly harmless. The unwinder has checks which prevent it from following bad pointers beyond the bounds of the stack. So it's not really a bug as long as the caller understands that unwinding another task will not always succeed. In such cases, it's possible that the unwinder may read a KASAN-poisoned region of the stack. Account for that by using READ_ONCE_NOCHECK() when reading the stack of another task. Use READ_ONCE() when reading the stack of the current task, since KASAN warnings can still be useful for finding bugs in that case. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4c575eb288ba9f73d498dfe0acde2f58674598f1.1483978430.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Laura Abbott authored
commit 5c6a84a3 upstream. __pa_symbol is the correct API to find the physical address of symbols. Switch to it to allow for debugging APIs to work correctly. Other functions such as p*d_populate may call __pa internally. Ensure that the address passed is in the linear region by calling lm_alias. Reviewed-by:
-
Josh Poimboeuf authored
commit b53f40db upstream. Resuming from a suspend operation is showing a KASAN false positive warning: BUG: KASAN: stack-out-of-bounds in unwind_get_return_address+0x11d/0x130 at addr ffff8803867d7878 Read of size 8 by task pm-suspend/7774 page:ffffea000e19f5c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x2ffff0000000000() page dumped because: kasan: bad access detected CPU: 0 PID: 7774 Comm: pm-suspend Tainted: G B 4.9.0-rc7+ #8 Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F5 03/07/2016 Call Trace: dump_stack+0x63/0x82 kasan_report_error+0x4b4/0x4e0 ? acpi_hw_read_port+0xd0/0x1ea ? kfree_const+0x22/0x30 ? acpi_hw_validate_io_request+0x1a6/0x1a6 __asan_report_load8_noabort+0x61/0x70 ? unwind_get_return_address+0x11d/0x130 unwind_get_return_address+0x11d/0x130 ? unwind_next_frame+0x97/0xf0 __save_stack_trace+0x92/0x100 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 ? kasan_kmalloc+0xad/0xe0 ? kasan_slab_alloc+0x12/0x20 ? acpi_hw_read+0x2b6/0x3aa ? acpi_hw_validate_register+0x20b/0x20b ? acpi_hw_write_port+0x72/0xc7 ? acpi_hw_write+0x11f/0x15f ? acpi_hw_read_multiple+0x19f/0x19f ? memcpy+0x45/0x50 ? acpi_hw_write_port+0x72/0xc7 ? acpi_hw_write+0x11f/0x15f ? acpi_hw_read_multiple+0x19f/0x19f ? kasan_unpoison_shadow+0x36/0x50 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc_trace+0xbc/0x1e0 ? acpi_get_sleep_type_data+0x9a/0x578 acpi_get_sleep_type_data+0x9a/0x578 acpi_hw_legacy_wake_prep+0x88/0x22c ? acpi_hw_legacy_sleep+0x3c7/0x3c7 ? acpi_write_bit_register+0x28d/0x2d3 ? acpi_read_bit_register+0x19b/0x19b acpi_hw_sleep_dispatch+0xb5/0xba acpi_leave_sleep_state_prep+0x17/0x19 acpi_suspend_enter+0x154/0x1e0 ? trace_suspend_resume+0xe8/0xe8 suspend_devices_and_enter+0xb09/0xdb0 ? printk+0xa8/0xd8 ? arch_suspend_enable_irqs+0x20/0x20 ? try_to_freeze_tasks+0x295/0x600 pm_suspend+0x6c9/0x780 ? finish_wait+0x1f0/0x1f0 ? suspend_devices_and_enter+0xdb0/0xdb0 state_store+0xa2/0x120 ? kobj_attr_show+0x60/0x60 kobj_attr_store+0x36/0x70 sysfs_kf_write+0x131/0x200 kernfs_fop_write+0x295/0x3f0 __vfs_write+0xef/0x760 ? handle_mm_fault+0x1346/0x35e0 ? do_iter_readv_writev+0x660/0x660 ? __pmd_alloc+0x310/0x310 ? do_lock_file_wait+0x1e0/0x1e0 ? apparmor_file_permission+0x18/0x20 ? security_file_permission+0x73/0x1c0 ? rw_verify_area+0xbd/0x2b0 vfs_write+0x149/0x4a0 SyS_write+0xd9/0x1c0 ? SyS_read+0x1c0/0x1c0 entry_SYSCALL_64_fastpath+0x1e/0xad Memory state around the buggy address: ffff8803867d7700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8803867d7780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8803867d7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f4 ^ ffff8803867d7880: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff8803867d7900: 00 00 00 f1 f1 f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00 KASAN instrumentation poisons the stack when entering a function and unpoisons it when exiting the function. However, in the suspend path, some functions never return, so their stack never gets unpoisoned, resulting in stale KASAN shadow data which can cause later false positive warnings like the one above. Reported-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
