- 23 Nov, 2022 40 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Jacopo Mondi <jacopo@jmondi.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221118224540.619276-68-uwe@kleine-koenig.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Angel Iglesias authored
Use i2c_client_get_device_id() to get the i2c_device_id* parameter in the .new_probe() callback. Signed-off-by:
Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by:
-
Jonathan Cameron authored
-
Lorenzo Bianconi authored
Fix sensor ODR description for LSM6DSV/LSM6DSVX Fixes: a1c6d631 ("iio: imu: st_lsm6dsx: add support to LSM6DSV") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/653e14bf79bb88d8581d2bc42da2f784caaf3776.1668417770.git.lorenzo@kernel.orgSigned-off-by:
-
Cosmin Tanislav authored
Fixes undefined references to 'gpiochip_get_data' and 'devm_gpiochip_add_data_with_key'. Signed-off-by:
Cosmin Tanislav <cosmin.tanislav@analog.com> Reported-by:
kernel test robot <lkp@intel.com> Fixes: 62094060 ("iio: adc: ad4130: add AD4130 driver") Link: https://lore.kernel.org/r/20221114133649.1737027-1-cosmin.tanislav@analog.comSigned-off-by:
-
Deepak R Varma authored
Replace ternary operator by simple if based evaluation of the return value. Issue identified using coccicheck. Signed-off-by:
Deepak R Varma <drv@mailo.com> Link: https://lore.kernel.org/r/Y3CAdCa17WdWDYUa@qemulionSigned-off-by:
-
Subhajit Ghosh authored
There is only one interrupt enable option for both ALS low and high thresholds, and one for both Proximity low and high thresholds. Signed-off-by:
Subhajit Ghosh <subhajit.ghosh@vixtechnology.com> Reviewed-by:
Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20221110101241.10576-1-subhajit.ghosh@vixtechnology.comSigned-off-by:
-
Jay Greco authored
Update the required documentation for the icm42631. Signed-off-by:
Jay Greco <grecojay@amazon.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20221110192933.13616-3-grecojay@amazon.comSigned-off-by:
-
Jay Greco authored
Add the required WHOAMI and device_id definitions to support the icm42631. Signed-off-by:
-
Jagan Teki authored
Add saradc compatible string for rockchip rv1126. Cc: linux-iio@vger.kernel.org Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Acked-by:
-
Rob Herring authored
'contains' applies to arrays, but 'adi,dc-dc-mode' is a scalar. So drop 'contains' from the 'if' schema. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221111212846.4104059-1-robh@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Add device bindings for lsm6dsv16x IMU sensor. Use lsm6dsv as fallback device for lsm6dsv16x since it implements all the features currently supported by lsm6dsv16x. Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM LSM6DSV16X (accelerometer and gyroscope) Mems sensor. The LSM6DSV16X sensor can use LSM6DSV as fallback device since it implements all the LSM6DSV16X features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsv16x.pdfSigned-off-by:
-
Gwendal Grignou authored
From https://treexy.com/products/driver-fusion/database/sensors/semtech/sx9360-proximity/ sx9360 SAR sensor can be presented with ACPI ID SAMM0208. Whilst this does not appear to be an official ACPI ID, it is in the wild (perhaps due to a typo on the SAM PnP ID). Reported-by:
Jordi Torres <majosamaso@gmail.com> Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20221105225157.10081-1-gwendal@chromium.orgSigned-off-by:
-
Jonathan Cameron authored
Only used within this file, so should be marked static. Fixes: 2aebc223 ("iio: temperature: mlx90632 Add runtime powermanagement modes") Signed-off-by:
Crt Mori <cmo@melexis.com> Link: https://lore.kernel.org/r/20221105125108.383193-3-jic23@kernel.org
-
Jonathan Cameron authored
This call can fail so handling is necessary even if it is very unlikely. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527134 ("Error handling issues") Fixes: 2aebc223 ("iio: temperature: mlx90632 Add runtime powermanagement modes") Signed-off-by:
-
Cosmin Tanislav authored
Add support for the following parts: * LTC2984 * LTC2986 * LTM2985 The LTC2984 is a variant of the LTC2983 with EEPROM. The LTC2986 is a variant of the LTC2983 with only 10 channels, EEPROM and support for active analog temperature sensors. The LTM2985 is software-compatible with the LTC2986. Signed-off-by:
-
Cosmin Tanislav authored
Add support for the following parts: * LTC2984 * LTC2986 * LTM2985 The LTC2984 is a variant of the LTC2983 with EEPROM. The LTC2986 is a variant of the LTC2983 with only 10 channels, EEPROM and support for active analog temperature sensors. The LTM2985 is software-compatible with the LTC2986. Signed-off-by:
-
Cosmin Tanislav authored
Examples should use the generic IIO node name of temperature-sensor. Fix it. Signed-off-by:
-
Cosmin Tanislav authored
The 'adi,mux-delay-config-us' property is broken. It was supposed to be in us, but the value is actually written directly to the register. Describe the fact that it is broken and how it actually works. Signed-off-by:
-
Cosmin Tanislav authored
Some descriptions are too verbose, while others are too succint. Rewrite them all. Signed-off-by:
-
Cosmin Tanislav authored
Excitation cannot be set to auto-range when using a custom thermistor or Steinhart sensor type. Default it to 1000nA to match the driver and remove the auto-range value from the enum. Signed-off-by:
-
