- 07 Aug, 2015 32 commits
-
-
Sowmini Varadhan authored
Open the sockets calling sock_create_kern() with the correct struct net pointer, and use that struct net pointer when verifying the address passed to rds_bind(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-08-05 This series contains updates to i40e, i40evf and e1000e. Anjali adds support for x772 devices to i40e and i40evf. With the added support, x772 supports offloading of the outer UDP transmit and receive checksum for tunneled packets. Also supports evicting ATR filters in the hardware, so update the driver with this new feature set. Raanan provides several fixes for e1000e, first rectifies the Energy Efficient Ethernet in Sx code so that it only applies to parts that actually support EEE in Sx. Fix whitespace and moved ICH8 related define to the proper context. Fixed the ASPM locking which was reported by Bjorn Helgaas. Fix a workaround implementation for systime which could experience a large non-linear increment of the systime value when checking for overflow. ==================== Signed-off-by: -
Jason A. Donenfeld authored
The pr_debug family of functions turns into a no-op when -DDEBUG is not specified, opting instead to call "no_printk", which gets compiled to a no-op (but retains gcc's nice warnings about printf-style arguments). The problem with net_dbg_ratelimited is that it is defined to be a variant of net_ratelimited_function, which expands to essentially: if (net_ratelimit()) pr_debug(fmt, ...); When DEBUG is not defined, then this becomes, if (net_ratelimit()) ; This seems benign, except it isn't. Firstly, there's the obvious overhead of calling net_ratelimit needlessly, which does quite some book keeping for the rate limiting. Given that the pr_debug and net_dbg_ratelimited family of functions are sprinkled liberally through performance critical code, with developers assuming they'll be compiled out to a no-op most of the time, we certainly do not want this needless book keeping. Secondly, and most visibly, even though no debug message is printed when DEBUG is not defined, if there is a flood of invocations, dmesg winds up peppered with messages such as "net_ratelimit: 320 callbacks suppressed". This is because our aforementioned net_ratelimit() function actually prints this text in some circumstances. It's especially odd to see this when there isn't any other accompanying debug message. So, in sum, it doesn't make sense to have this function's current behavior, and instead it should match what every other debug family of functions in the kernel does with !DEBUG -- nothing. This patch replaces calls to net_dbg_ratelimited when !DEBUG with no_printk, keeping with the idiom of all the other debug print helpers. Also, though not strictly neccessary, it guards the call with an if (0) so that all evaluation of any arguments are sure to be compiled out. Signed-off-by:Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Roopa Prabhu authored
This patch adds null dev check for the 'cfg->rc_via_table == NEIGH_LINK_TABLE or dev_get_by_index() failed' case Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Nicolas Schichan says: ==================== test_bpf improvements Please find below the patch series with my latest changes to test_bpf. The first patch checks for unexpected NULL generated skbs before running the filter. The second patch adds the possibility for tests to generate fragmented skbs. The third patch tests LD_ABS and LD_IND on fragmented skbs. The fourth patch adds the possibility to restrict the tests being run by specifying the name/id/range of the test(s) to run via module parameters. The fifth patch tests LD_ABS and LD_IND on non fragmented skbs with various sizes and alignments. The sixth and final patch checks that the interpreter or JIT correctly resets A and X to 0. This serie is against today's net-next tree. Changes in V2: * move declaration of 'ptr' in if() block in patch 2/6. * fix various typos in patch 4/6 * rework default init of test_range array and cleanup exclude_test() return condition in patch 4/6. ==================== Signed-off-by: -
Nicolas Schichan authored
It is mandatory for the JIT or interpreter to reset the A and X registers to 0 before running the filter. Check that it is the case on various ALU and JMP instructions. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Nicolas Schichan authored
This exerces the LD_ABS and LD_IND instructions for various sizes and alignments. This also checks that X when used as an offset to a BPF_IND instruction first in a filter is correctly set to 0. Signed-off-by:
-
Nicolas Schichan authored
When developping on the interpreter or a particular JIT, it can be interesting to restrict the tests list to a specific test or a particular range of tests. This patch adds the following module parameters to the test_bpf module: * test_name=<string>: only the specified named test will be run. * test_id=<number>: only the test with the specified id will be run (see the output of test_bpf without parameters to get the test id). * test_range=<number>,<number>: only the tests within IDs in the specified id range are run (see the output of test_bpf without parameters to get the test ids). Any invalid range, test id or test name will result in -EINVAL being returned and no tests being run. Signed-off-by:
-
Nicolas Schichan authored
These new tests exercise various load sizes and offsets crossing the head/fragment boundary. Signed-off-by:
-
Nicolas Schichan authored
This introduce a new test->aux flag (FLAG_SKB_FRAG) to tell the populate_skb() function to add a fragment to the test skb containing the data specified in test->frag_data). Signed-off-by:
-
Nicolas Schichan authored
Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx5e: Driver updates 04-Aug-2015 This patchset introduces two features to the ConnectX-4 driver: Patch 8/8 ("Support physical port counters") exposes some hardware counters through ethtool. Rest of the patches are preparation and usage of what we call light-weight netdev open/close. Some flows that used to be in the ndo_open/stop are moved to the PCI probe/remove flows - i.e. we will make the netdev open/close operations more "light-weight". The benefits of this change are: 1) Reduce the execution time of the stop/open operations. 2) Avoid saving SW shadows of resource configurations that must persist through stop/open operations (e.g flow table steering rules), and avoid deleting/applying them from/to the device upon netdev stop/open. 3) Avoid synchronizing threads that access those resources with the netdev stop/open threads. Instead of create/destroy the resource during netdev open/stop, This patchset changes the behavior such that upon netdev stop, traffic is redirected to a "Drop RQ" (a RQ that silently drops, at the NIC HW level all incoming traffic). After redirecting the traffic, RX/TX software resources could be destroyed. During netdev open, the RX/TX rings are created and traffic is redirected to the RX rings. Patchset was applied and tested over commit ba7591d8 ("ebpf: add skb->hash to offset map for usage in {cls, act}_bpf or filters") ==================== Signed-off-by: -
Gal Pressman authored
Added physical port counters in the following standard formats to ethtool statistics: - IEEE 802.3 - RFC2863 - RFC2819 Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Achiad Shochat authored
Now that TIRs, TISs and flow tables are kept alive while the netdev is stopped (after executing ndo_stop()) we can do the following improvements: - Obsolete the active_vlans SW shadow. - Do not delete/add flow table rules upon ndo_stop/open. In addition to simplifying the flow, this change also fastens the ndo_open/close operations. - Obsolete synchronization of threads accessing the flow tables with the netdev stop/open threads. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
-
Achiad Shochat authored
It does not make sense to allow events while the netdev is unregistered. Signed-off-by:
-
Achiad Shochat authored
Rename some functions that used to be invoked upon ndo_open/stop and are now invoked upon create/destroy_netdev() in order to better hint their place in the flow. Change some functions location in the file so that functions involved in ndo_open/stop flow will not be interleaved with other functions. This is a cosmetic change, no logical change here. Signed-off-by:
-
Achiad Shochat authored
Create/destroy TIRs, TISs and flow tables upon PCI probe/remove rather than upon the netdev ndo_open/stop. Upon ndo_stop(), redirect all RX traffic to the (lately introduced) "Drop RQ" and then close only the RX/TX rings, leaving the TIRs, TISs and flow tables alive. Signed-off-by:
-
Achiad Shochat authored
To be used by the mlx5 Eth driver in following commit. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by:
-
Achiad Shochat authored
RX traffic routed to this RQ will be silently dropped, at the NIC HW level. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by:
-
Achiad Shochat authored
Generally an RX packet flows through the following objects: Flow table --> TIR --> RQT --> RQ Where: - TIR stands for "Transport Interface Receive", defining the RSS and LRO paramaters. - RQT stands for "RQ Table", implementing the RSS indirection table. - RQ stands for "Receive Queue" For flows that do not need LRO, nor RSS, the driver made a shortcut to the above RX flow by pointing to the RQ directly from the TIR, yielding this flow: Flow table --> TIR --> RQ In this commit we remove this shortcut by "inserting" a single-RQ RQT between the TIR and the RQ, i.e RX packets will reach the same RQ but will go through an RQT of size 1, pointing to just a single RQ. This way the RX traffic re-direction to/from the "Drop RQ" will be more uniform (AKA "one flow"), as it will involve only RQTs re-direction and no TIRs re-direction. Signed-off-by:
-
David S. Miller authored
Mugunthan V N says: ==================== CPSW interrupt handling cleanup and performance improvement This patch series removes the irq controller disable interrupt and adding a napi for tx event handling which improves the performance by ~180Mbps on dra7-evm [ 5] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 44176 [ 5] 0.0-60.0 sec 1.48 GBytes 210 Mbits/sec [ 4] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 33257 [ 4] 0.0-60.0 sec 2.71 GBytes 386 Mbits/sec Changes from initial version: * Added a patch to have napi only for first interface as there is no use of having seperate napis for each interface as the interrupt is shared by both interface and only one napi is scheduled for each interrupt. ==================== Signed-off-by: -
Mugunthan V N authored
Instead of processing tx events in isr adding separate napi for tx which improves performance by ~180Mbps with omap2plus_defconfig on DRA74x platform. Also cleaning up rx napis by renaming to napi_rx for better understanding the code. Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Mugunthan V N authored
Since interrupt is shared between the two ethernet interface and in isr only one napi is scheduled at an instance so having two napis doesn't make any difference. So making napi also as a common resource for the dual ethernet interfaces. Signed-off-by:
-
Mugunthan V N authored
CPSW interrupts can be disabled by masking CPSW interrupts and clearing interrupt by writing appropriate EOI. So removing all disable_irq/enable_irq as discussed in [1] [1] http://patchwork.ozlabs.org/patch/492741/Signed-off-by:
-
Dan Carpenter authored
We recently changed this code from returning NULL to returning ERR_PTR. There are some left over NULL assignments which we can remove. We can preserve the error code from ip_route_output() instead of always returning -ENODEV. Also these functions use a mix of gotos and direct returns. There is no cleanup necessary so I changed the gotos to direct returns. Signed-off-by:
Robert Shearman <rshearma@brocade.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x, cnic, bnx2fc: add support for BD Commit 230d00eb ("bnx2x: new Multi-function mode - BD") added support for a new multi-function mode, but it added only the support required by bnx2x for L2 interfaces. This adds the required changes to support the new multi-function mode in the offloaded storage protocols. Dave, Please consider applying this series to `net-next'. Do notice that this involves non-networking driver changes - but sending this as a single series seemed like the best approach as we had to have bnx2x changes to support the new functionality. If this is problematic, please tell us what's the preferred solution here. Changes from previous versions ------------------------------ - From v1 - no actual changes; v1 failed to reach netdev so in order to keep things in line I've termed this one v2. ==================== Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
Commit 230d00eb ("bnx2x: new Multi-function mode - BD") adds support for the new mode in bnx2x. This expands this support by implementing APIs required by our storage drivers to support that mode. Signed-off-by:
-
Adheer Chandravanshi authored
Signed-off-by:
Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by:
-
Tej Parkash authored
Signed-off-by:
Tej Parkash <tej.parkash@qlogic.com> Signed-off-by:
-
Scott Feldman authored
After successful register_netdev, we can use netdev_err rather the more generic dev_err. Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
-
Scott Feldman authored
Set port to NULL if port probe fails so we don't try to remove partially initialized port on port probe err cleanup path. Signed-off-by:
-
- 05 Aug, 2015 8 commits
-
-
Raanan Avargil authored
Signed-off-by:
Raanan Avargil <raanan.avargil@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Raanan Avargil authored
Change the algorithm. Read systimel twice and check for overflow. If there was no overflow, use the first value. If there was an overflow, read systimeh again and use the second systimel value. Signed-off-by:
-
Raanan Avargil authored
This patch fixes wrong locking usage. In the context of slot reset, we should use lock. And during resume, there is no need of lock. Reported-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Raanan Avargil authored
1) Replace spaces with tab. 2) Move ich8lan related define to the proper context. Signed-off-by:
-
Raanan Avargil authored
This patch implements the EEE in Sx code so that it only applies to parts that support EEE in Sx (as opposed to all parts that support EEE). It also uses the existing eee_advert and eee_lp_abiliity to set just the bits (100/1000) that should be set. Signed-off-by:
-
Shannon Nelson authored
X722 does NVM update via the adminq queue, so we need to add support for that. Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Jim Young <james.m.young@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
X722 supports evicting ATR filters in the HW. With this patch, we enable the feature in the driver and avoid filter deletion by the driver. Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
X722 supports IWARP, this patch handles checking for PE critical errors. Since the driver doesn't support the IWARP interface for now, this patch just does bare minimum to log a message oif a PE critical error happens. Signed-off-by:
-
