- 06 Dec, 2018 18 commits
-
-
Peter Oskolkov authored
When testing high-bandwidth TCP streams with large windows, high latency, and low jitter, netem consumes a lot of CPU cycles doing rbtree rebalancing. This patch uses a linear list/queue in addition to the rbtree: if an incoming packet is past the tail of the linear queue, it is added there, otherwise it is inserted into the rbtree. Without this patch, perf shows netem_enqueue, netem_dequeue, and rb_* functions among the top offenders. With this patch, only netem_enqueue is noticeable if jitter is low/absent. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Peter Oskolkov <posk@google.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: convert multicast to generic rhashtable The current bridge multicast code uses a custom rhashtable implementation which predates the generic rhashtable API. Patch 01 converts it to use the generic kernel rhashtable which simplifies the code a lot and removes duplicated functionality. The convert also makes hash_elasticity obsolete as the generic rhashtable already has such checks and has a fixed elasticity of RHT_ELASTICITY (16 currently) so we emit a warning whenever elasticity is set and return RHT_ELASTICITY when read (patch 03). Patch 02 converts the multicast code to use non-bh RCU flavor as it was mixing bh and non-bh. Since now we have the generic rhashtable which autoshrinks we can be more liberal with the default hash maximum so patch 04 increases it to 4096 and moves it to a define in br_private.h. v3: add non-rcu br_mdb_get variant and use it where we have multicast_lock, drop special hash_max handling and just set it where needed and use non-bh RCU consistently (patch 02, new) v2: send the latest version of the set which handles when IGMP snooping is not defined, changes are in patch 01 ==================== Signed-off-by: -
Nikolay Aleksandrov authored
bridge's default hash_max was 512 which is rather conservative, now that we're using the generic rhashtable API which autoshrinks let's increase it to 4096 and move it to a define in br_private.h. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Now that the bridge multicast uses the generic rhashtable interface we can drop the hash_elasticity option as that is already done for us and it's hardcoded to a maximum of RHT_ELASTICITY (16 currently). Add a warning about the obsolete option when the hash_elasticity is set. Signed-off-by:
-
Nikolay Aleksandrov authored
The bridge multicast code has been using a mix of RCU and RCU-bh flavors sometimes in questionable way. Since we've moved to rhashtable just use non-bh RCU everywhere. In addition this simplifies freeing of objects and allows us to remove some unnecessary callback functions. v3: new patch Signed-off-by:
-
Nikolay Aleksandrov authored
The bridge multicast code currently uses a custom resizable hashtable which predates the generic rhashtable interface. It has many shortcomings compared and duplicates functionality that is presently available via the generic rhashtable, so this patch removes the custom rhashtable implementation in favor of the kernel's generic rhashtable. The hash maximum is kept and the rhashtable's size is used to do a loose check if it's reached in which case we revert to the old behaviour and disable further bridge multicast processing. Also now we can support any hash maximum, doesn't need to be a power of 2. v3: add non-rcu br_mdb_get variant and use it where multicast_lock is held to avoid RCU splat, drop hash_max function and just set it directly v2: handle when IGMP snooping is undefined, add br_mdb_init/uninit placeholders Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-updates-2018-12-04 This series includes updates to mlx5e netdevice driver From Saeed, Remove trailing space of tx_pause ethtool stat From Gal, Cleanup unused defines From Aya, ethtool Support for configuring of RX hash fields From Tariq, Improve ethtool private-flags code structure ==================== Signed-off-by: -
David S. Miller authored
Andrew Lunn says: ==================== u32 to linkmode fixes This patchset fixes issues found in the last patchset which converted the phydev advertise etc, from a u32 to a linux bitmap. Most of the issues are the result of clearing bits which should not of been cleared. To make the API clearer, the idea from Heiner Kallweit was used, with _mod_ to indicate the function modifies just the bits it needs to, or _to_ to clear all bits and just set bit that need to be set. ==================== Signed-off-by: -
Andrew Lunn authored
When the MII_ADVERTISE register is modified by the IOCTL handler, phydev->advertising needs recalculating. Use the _mod_ variant of mii_adv_to_linkmode_adv_t so that bits outside of the advertise registers are not cleared. Fixes: c0ec3c27 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Replace the if else code structure with a call to the helper linkmode_mod_bit. Signed-off-by:
-
Andrew Lunn authored
Add a _mod_ variant of mii_lpa_to_linkmode_lpa_t. Use this to fix the genphy_read_status() where the 1G link partner features are getting lost. Fixes: c0ec3c27 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by:
-
Andrew Lunn authored
Rename mii_lpa_to_linkmode_lpa_t to mii_lpa_mod_linkmode_lpa_t to indicate it modifies the passed linkmode bitmap, without clearing any other bits. Also, ensure bit are clear which the lpa indicates should not be set. Fixes: c0ec3c27 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Suggested-by:
-
Andrew Lunn authored
Rename mii_stat1000_to_linkmode_lpa_t to mii_stat1000_mod_linkmode_lpa_t to indicate it modifies the passed linkmode bitmap, without clearing any other bits. Add a helper to set/clear bits in a linkmode. Use this helper to ensure bit are clear which the stat1000 indicates should not be set. Fixes: c0ec3c27 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Suggested-by:
-
Andrew Lunn authored
mii_adv_to_linkmode_adv_t() clears all bits before setting it needs to set. This means the freshly set Autoneg gets cleared. Change the order, and add comments about it clearing the old content of the bitmap. Fixes: c0ec3c27 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Reported-by:
-
Tariq Toukan authored
Refactor the code of private-flags setter. Replace consecutive calls to mlx5e_handle_pflag with a loop that uses a preset set of parameters. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
Enable user configuration of RX hash fields that are used for traffic spreading into RX queues. User can change built-in RSS (Receive Side Scaling) profiles on the following traffic types: UDP4, UDP6, TCP4 and TCP6. This configuration effects both outer and inner headers. Added support for ethtool commands: ETHTOOL_SRXFH and ETHTOOL_GRXFH. Command example respectively: $ethtool -N eth1 rx-flow-hash tcp4 sdfn $ethtool -n eth1 rx-flow-hash tcpp4 IP SA IP DA L4 bytes 0 & 1 [TCP/UDP src port] L4 bytes 2 & 3 [TCP/UDP dst port] Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
-
Aya Levin authored
Remove RSS params from params struct under channels, and introduce a new struct with RSS configuration params under priv struct. There is no functional change here. Signed-off-by:
-
Aya Levin authored
Refactor mlx5e_build_indir_tir_ctx_hash for better code re-use. TIR stands for Transport Interface Receive, which is responsible for all transport related operations on the receive side. Added a static array with TIR default configuration values. This separates configuration values from command setting, which is needed for downstream patch. Signed-off-by:
-
- 05 Dec, 2018 9 commits
-
-
Jakub Kicinski authored
Documentation/networking/ is full of cryptically named files with driver documentation. This makes finding interesting information at a glance really hard. Move all those files into a directory called device_drivers (since not all drivers are for device) and fix up references. RFC v0.1 -> RFC v1: - also add .txt suffix to the files which are missing it (Quentin) Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Acked-by:
David Ahern <dsahern@gmail.com> Acked-by:
Henrik Austad <henrik@austad.us> Signed-off-by:
-
Eric Dumazet authored
TCP_NOTSENT_LOWAT socket option or sysctl was added in linux-3.12 as a step to enable bigger tcp sndbuf limits. It works reasonably well, but the following happens : Once the limit is reached, TCP stack generates an [E]POLLOUT event for every incoming ACK packet. This causes a high number of context switches. This patch implements the strategy David Miller added in sock_def_write_space() : - If TCP socket has a notsent_lowat constraint of X bytes, allow sendmsg() to fill up to X bytes, but send [E]POLLOUT only if number of notsent bytes is below X/2 This considerably reduces TCP_NOTSENT_LOWAT overhead, while allowing to keep the pipe full. Tested: 100 ms RTT netem testbed between A and B, 100 concurrent TCP_STREAM A:/# cat /proc/sys/net/ipv4/tcp_wmem 4096 262144 64000000 A:/# super_netperf 100 -H B -l 1000 -- -K bbr & A:/# grep TCP /proc/net/sockstat TCP: inuse 203 orphan 0 tw 19 alloc 414 mem 1364904 # This is about 54 MB of memory per flow :/ A:/# vmstat 5 5 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 256220672 13532 694976 0 0 10 0 28 14 0 1 99 0 0 2 0 0 256320016 13532 698480 0 0 512 0 715901 5927 0 10 90 0 0 0 0 0 256197232 13532 700992 0 0 735 13 771161 5849 0 11 89 0 0 1 0 0 256233824 13532 703320 0 0 512 23 719650 6635 0 11 89 0 0 2 0 0 256226880 13532 705780 0 0 642 4 775650 6009 0 12 88 0 0 A:/# echo 2097152 >/proc/sys/net/ipv4/tcp_notsent_lowat A:/# grep TCP /proc/net/sockstat TCP: inuse 203 orphan 0 tw 19 alloc 414 mem 86411 # 3.5 MB per flow A:/# vmstat 5 5 # check that context switches have not inflated too much. procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 260386512 13592 662148 0 0 10 0 17 14 0 1 99 0 0 0 0 0 260519680 13592 604184 0 0 512 13 726843 12424 0 10 90 0 0 1 1 0 260435424 13592 598360 0 0 512 25 764645 12925 0 10 90 0 0 1 0 0 260855392 13592 578380 0 0 512 7 722943 13624 0 11 88 0 0 1 0 0 260445008 13592 601176 0 0 614 34 772288 14317 0 10 90 0 0 Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== net/sched: act_tunnel_key: support key-less tunnels This short series from Adi Nissim allows to support key-less tunnels by the tc tunnel key actions, which is needed for some GRE use-cases. changes from V0: - addresses build warning spotted by kbuild, make sure to always init to zero the tunnel key ==================== Signed-off-by: -
Adi Nissim authored
It's possible to set a tunnel without a destination port. However, on dump(), a zero dst port is returned to user space even if it was not set, fix that. Note that so far it wasn't required, b/c key less tunnels were not supported and the UDP tunnels do require destination port. Signed-off-by:
Adi Nissim <adin@mellanox.com> Reviewed-by:
Oz Shlomo <ozsh@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Adi Nissim authored
Allow setting a tunnel without a tunnel key. This is required for tunneling protocols, such as GRE, that define the key as an optional field. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a DP_NOTICE message, fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Aya Levin authored
Move modify tirs hash functionality (mlx5e_modify_tirs_hash) from en_ethtool.c to en_main.c. This allows future use of this fuctionality from en_fs_ethtool.c, while keeping current convention: en_ethtool.c doesn't have an API. There is no functional change here. Signed-off-by:
-
Gal Pressman authored
Remove couple of defines that are no longer used. Signed-off-by:
Gal Pressman <pressmangal@gmail.com> Signed-off-by:
-
Saeed Mahameed authored
tx_pause_storm_warning_events ethtool counter name has a trailing space, remove it. Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com>
-
- 04 Dec, 2018 13 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add one-armed router support Up until now, when a packet was routed by the ASIC through the same router interface (RIF) from which it ingressed from, the ASIC passed the sole copy of the packet to the kernel. This allowed the kernel to route the packet and also potentially generate an ICMP redirect. There are scenarios (e.g., "one-armed router") where packets are intentionally routed this way and are therefore not deemed as exceptions. In such scenarios the current method of trapping packets to the CPU is problematic, as it results in major packet loss. This patchset solves the problem by having the ASIC forward the packet, but also send a copy to the CPU, which gives the kernel the opportunity to generate required exceptions. To prevent the kernel from forwarding such packets again, the driver marks them with 'offload_l3_fwd_mark', which causes the kernel to consume them in ip{,6}_forward_finish(). Patch #1 renames 'offload_mr_fwd_mark' to 'offload_l3_fwd_mark'. When set, the field indicates that a packet was already forwarded in L3 (unicast / multicast) by a capable device. Patch #2 teaches the kernel to consume unicast packets that have 'offload_l3_fwd_mark' set. Patch #3 changes mlxsw to mirror loopbacked (iRIF == eRIF) packets, instead of trapping them. Patch #4 adds a test case for above mentioned scenario. ==================== Signed-off-by: -
Ido Schimmel authored
Construct a "one-armed router" topology and test that packets are forwarded by the ASIC and that a copy of the packet is sent to the kernel, which does not forward the packet again. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When the ASIC detects that a unicast packet is routed through the same router interface (RIF) from which it ingressed (iRIF == eRIF), it raises a trap called loopback error (LBERROR). Thus far, this trap was configured to send a sole copy of the packet to the CPU so that ICMP redirect packets could be potentially generated by the kernel. This is problematic as the CPU cannot forward packets at 3.2Tb/s and there are scenarios (e.g., "one-armed router") where iRIF == eRIF is not an exception. Solve this by changing the trap to send a copy of the packet to the CPU. To prevent the kernel from forwarding the packet again, it is marked with 'offload_l3_fwd_mark'. The trap is configured in a trap group of its own with a dedicated policer in order not to prevent packets trapped by other traps from reaching the CPU. Signed-off-by:
-
Ido Schimmel authored
Packets marked with 'offload_l3_fwd_mark' were already forwarded by a capable device and should not be forwarded again by the kernel. Therefore, have the kernel consume them. The check is performed in ip{,6}_forward_finish() in order to allow the kernel to process such packets in ip{,6}_forward() and generate required exceptions. For example, ICMP redirects. Signed-off-by: -
Ido Schimmel authored
Commit abf4bb6b ("skbuff: Add the offload_mr_fwd_mark field") added the 'offload_mr_fwd_mark' field to indicate that a packet has already undergone L3 multicast routing by a capable device. The field is used to prevent the kernel from forwarding a packet through a netdev through which the device has already forwarded the packet. Currently, no unicast packet is routed by both the device and the kernel, but this is about to change by subsequent patches and we need to be able to mark such packets, so that they will no be forwarded twice. Instead of adding yet another field to 'struct sk_buff', we can just rename 'offload_mr_fwd_mark' to 'offload_l3_fwd_mark', as a packet either has a multicast or a unicast destination IP. While at it, add a comment about both 'offload_fwd_mark' and 'offload_l3_fwd_mark'. Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4_core cleanups This patchset by Erez contains cleanups to the mlx4_core driver. Patch 1 replaces -EINVAL with -EOPNOTSUPP for unsupported operations. Patch 2 fixes some coding style issues. Series generated against net-next commit: 97e6c858 net: usb: aqc111: Initialize wol_cfg with memset in aqc111_suspend ==================== Signed-off-by:
-
Erez Alfasi authored
Fix 3 checkpatch errors within mlx4/main.c: - Unnecessary mlx4_debug_level global variable initialization to 0. - Prohibited space before comma. - Whitespaces instead of tab. Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
-
Erez Alfasi authored
Functions __set_port_type and mlx4_check_port_params returned -EINVAL while the proper return code is -EOPNOTSUPP as a result of an unsupported operation. All drivers should generate this and all users should check for it when detecting an unsupported functionality. Signed-off-by:
-
Jose Abreu authored
Logic of phy_device_create() requests PHY modules according to PHY ID but for C45 PHYs we use different field for the IDs. Let's also request the modules for these IDs. Changes from v1: - Only request C22 modules if C45 are not present (Andrew) Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Joao Pinto <joao.pinto@synopsys.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
