Pull clk fixes from Stephen Boyd:
 "A couple more patches that would be good to get into -rc1:

   - Revert an i.MX patch that's causing video failures because division
     math goes sideways

   - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
     variable instead of the usual u64 type

   - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
     reset controller when it can't be selected"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
  clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
  Revert "clk: imx: composite-8m: Add support to determine_rate"

Pull mailbox updates from Jassi Brar:

 - mailbox api: allow direct registration to a channel and convert omap
   and pcc to use mbox_bind_client

 - omap and hi6220 : use of_property_read_bool

 - test: fix double-free and use spinlock header

 - rockchip and bcm-pdc: drop of_match_ptr

 - mpfs: change config symbol

 - mediatek gce: support MT6795

 - qcom apcs: consolidate of_device_id and support IPQ9574

* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
  mailbox: qcom-apcs-ipc: do not grow the of_device_id
  dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
  dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
  mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
  mailbox: bcm-pdc: drop of_match_ptr for ID table
  mailbox: rockchip: drop of_match_ptr for ID table
  mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
  mailbox: mailbox-test: Explicitly include header for spinlock support
  mailbox: Use of_property_read_bool() for boolean properties
  mailbox: pcc: Use mbox_bind_client
  mailbox: omap: Use mbox_bind_client
  mailbox: Allow direct registration to a channel

Pull more io_uring updates from Jens Axboe:
 "Nothing major in here, just two different parts:

   - A small series from Breno that enables passing the full SQE down
     for ->uring_cmd().

     This is a prerequisite for enabling full network socket operations.
     Queued up a bit late because of some stylistic concerns that got
     resolved, would be nice to have this in 6.4-rc1 so the dependent
     work will be easier to handle for 6.5.

   - Fix for the huge page coalescing, which was a regression introduced
     in the 6.3 kernel release (Tobias)"

* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
  io_uring: Remove unnecessary BUILD_BUG_ON
  io_uring: Pass whole sqe to commands
  io_uring: Create a helper to return the SQE size
  io_uring/rsrc: check for nonconsecutive pages

Pull dmapool updates - again - from Andrew Morton:
 "Reinstate the dmapool changes which were accidentally removed by a
  mishap on the last commit in the previous attempt at the series"

Fixes: 2d55c16c ("dmapool: create/destroy cleanup").

[ The whole old series: def85743..2d55c16c results in an empty
  diff because that last commit ended up being just a revert of all that
  came everything before it.     - Linus ]

* tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  dmapool: link blocks across pages
  dmapool: don't memset on free twice
  dmapool: simplify freeing
  dmapool: consolidate page initialization
  dmapool: rearrange page alloc failure handling
  dmapool: move debug code to own functions
  dmapool: speedup DMAPOOL_DEBUG with init_on_alloc
  dmapool: cleanup integer types
  dmapool: use sysfs_emit() instead of scnprintf()
  dmapool: remove checks for dev == NULL

Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull hotfixes from Andrew Morton:
 "Five hotfixes.

  Three are cc:stable, two pertain to merge window changes"

* tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  afs: fix the afs_dir_get_folio return value
  nilfs2: do not write dirty data after degenerating to read-only
  mm: do not reclaim private data from pinned page
  nilfs2: fix infinite loop in nilfs_mdt_get_block()
  mm/mmap/vma_merge: always check invariants

The allocated dmapool pages are never freed for the lifetime of the pool. 
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list.  Just use a simple
stack, reducing time complexity to constant.

The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed.  This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.

Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:

Before:

  # modprobe dmapool_test
  dmapool test: size:16   blocks:8192   time:57282
  dmapool test: size:64   blocks:8192   time:172562
  dmapool test: size:256  blocks:8192   time:789247
  dmapool test: size:1024 blocks:2048   time:371823
  dmapool test: size:4096 blocks:1024   time:362237

After:

  # modprobe dmapool_test
  dmapool test: size:16   blocks:8192   time:24997
  dmapool test: size:64   blocks:8192   time:26584
  dmapool test: size:256  blocks:8192   time:33542
  dmapool test: size:1024 blocks:2048   time:9022
  dmapool test: size:4096 blocks:1024   time:6045

The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life.  For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.

[kbusch@kernel.org: push new blocks in ascending order]
  Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function.  Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.

Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Various fields of the dma pool are set in different places. Move it all
to one function.

Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Handle the error in a condition so the good path can be in the normal
flow.

Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Clean up the normal path by moving the debug code outside it.

Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.

Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places.  Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.

Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device.  But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops.  So remove the checks for pool->dev == NULL since they are
unneeded bloat.

[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Fixes: 2d55c16c ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().

The failure case used to return NULL, but was changed by commit
66dabbb6 ("mm: return an ERR_PTR from __filemap_get_folio").

But in the meantime, commit ec108d3c ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.

And my merge of the two did not fix this up correctly.

The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.

Fixes: 0127f25b ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs")
Cc: Anna Schumaker <anna@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.

Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de
Fixes: 66dabbb6 ("mm: return an ERR_PTR from __filemap_get_folio")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.

After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads.  However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.

Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.

This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.

Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If the page is pinned, there's no point in trying to reclaim it. 
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).

Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.

This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.

In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.

Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.

Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We may still have inconsistent input parameters even if we choose not to
merge and the vma_merge() invariant checks are useful for checking this
with no production runtime cost (these are only relevant when
CONFIG_DEBUG_VM is specified).

Therefore, perform these checks regardless of whether we merge.

This is relevant, as a recent issue (addressed in commit "mm/mempolicy:
Correctly update prev when policy is equal on mbind") in the mbind logic
was only picked up in the 6.2.y stable branch where these assertions are
performed prior to determining mergeability.

Had this remained the same in mainline this issue may have been picked up
faster, so moving forward let's always check them.

Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.comSigned-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Smatch reports that filemap_fault() was missed in the conversion of
__filemap_get_folio() error returns from NULL to ERR_PTR.

Fixes: 66dabbb6 ("mm: return an ERR_PTR from __filemap_get_folio")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more SCSI updates from James Bottomley:
 "Six late arriving patches for the merge window. Five are minor
  assorted fixes and updates.

  The IPR driver change removes SATA support, which will now allow a
  major cleanup in the ATA subsystem because it was the only driver
  still using the old attachment mechanism. The driver is only used on
  power systems and SATA was used to support a DVD device, which has
  long been moved to a different hba. IBM chose this route instead of
  porting ipr to the newer SATA interfaces"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Fix use after free bug in qedi_remove()
  scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
  scsi: ipr: Remove several unused variables
  scsi: pm80xx: Log device registration
  scsi: ipr: Remove SATA support
  scsi: scsi_debug: Abort commands from scsi_debug_device_reset()

Pull more block updates from Jens Axboe:

 - MD pull request via Song:
      - Improve raid5 sequential IO performance on spinning disks, which
        fixes a regression since v6.0 (Jan Kara)
      - Fix bitmap offset types, which fixes an issue introduced in this
        merge window (Jonathan Derrick)

 - Cleanup of hweight type used for cgroup writeback (Maxim)

 - Fix a regression with the "has_submit_bio" changes across partitions
   (Ming)

 - Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.

   We used to set this flag on queues non blk-mq queues, and hence some
   drivers clear it unconditionally. Since all of these have since been
   converted to true blk-mq drivers, drop the useless clear as the bit
   is not set (Chaitanya)

 - Fix the flags being set in a bio for a flush for drbd (Christoph)

 - Cleanup and deduplication of the code handling setting block device
   capacity (Damien)

 - Fix for ublk handling IO timeouts (Ming)

 - Fix for a regression in blk-cgroup teardown (Tao)

 - NBD documentation and code fixes (Eric)

 - Convert blk-integrity to using device_attributes rather than a second
   kobject to manage lifetimes (Thomas)

* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
  ublk: add timeout handler
  drbd: correctly submit flush bio on barrier
  mailmap: add mailmap entries for Jens Axboe
  block: Skip destroyed blkg when restart in blkg_destroy_all()
  writeback: fix call of incorrect macro
  md: Fix bitmap offset type in sb writer
  md/raid5: Improve performance for sequential IO
  docs nbd: userspace NBD now favors github over sourceforge
  block nbd: use req.cookie instead of req.handle
  uapi nbd: add cookie alias to handle
  uapi nbd: improve doc links to userspace spec
  blk-integrity: register sysfs attributes on struct device
  blk-integrity: convert to struct device_attribute
  blk-integrity: use sysfs_emit
  block/drivers: remove dead clear of random flag
  block: sync part's ->bd_has_submit_bio with disk's
  block: Cleanup set_capacity()/bdev_set_nr_sectors()

Pull nonblocking pipe io_uring support from Jens Axboe:
 "Here's the revised edition of the FMODE_NOWAIT support for pipes, in
  which we just flag it as such supporting FMODE_NOWAIT unconditionally,
  but clear it if we ever end up using splice/vmsplice on the pipe.

  The pipe read/write side is perfectly fine for nonblocking IO, however
  splice and vmsplice can potentially wait for IO with the pipe lock
  held"

* tag 'pipe-nonblock-2023-05-06' of git://git.kernel.dk/linux:
  pipe: set FMODE_NOWAIT on pipes
  splice: clear FMODE_NOWAIT on file if splice/vmsplice is used

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes for rc1.

  The only (LOC-wise) dominant change was ASoC Qualcomm fix, but most of
  it was merely a code shuffling.

  Another significant change here is for ALSA PCM core; it received a
  revert and a series of fixes for PCM auto-silencing where it caused a
  regression in the previous PR for rc1.

  Others are all small: ASoC Intel fixes, various quirks for ASoC AMD,
  HD-audio and USB-audio, the continued legacy emu10k1 code cleanup, and
  some documentation updates"

* tag 'sound-fix-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: pcm: use exit controlled loop in snd_pcm_playback_silence()
  ALSA: pcm: simplify top-up mode init in snd_pcm_playback_silence()
  ALSA: pcm: playback silence - move silence variable updates to separate function
  ALSA: pcm: playback silence - remove extra code
  ALSA: pcm: fix playback silence - correct incremental silencing
  ALSA: pcm: fix playback silence - use the actual new_hw_ptr for the threshold mode
  ALSA: pcm: Revert "ALSA: pcm: rewrite snd_pcm_playback_silence()"
  ALSA: hda/realtek: Fix mute and micmute LEDs for an HP laptop
  ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
  ALSA: usb-audio: Add quirk for Pioneer DDJ-800
  ALSA: hda/realtek: support HP Pavilion Aero 13-be0xxx Mute LED
  ASoC: Intel: soc-acpi-cht: Add quirk for Nextbook Ares 8A tablet
  ASoC: amd: yc: Add Asus VivoBook Pro 14 OLED M6400RC to the quirks list for acp6x
  ASoC: codecs: wcd938x: fix accessing regmap on unattached devices
  ALSA: docs: Fix code block indentation in ALSA driver example
  ALSA: docs: Extend module parameters description
  ALSA: hda/realtek: Add quirk for ASUS UM3402YAR using CS35L41
  ALSA: emu10k1: use more existing defines instead of open-coded numbers
  ASoC: amd: yc: Add ASUS M3402RA into DMI table
  ALSA: hda/realtek: Add quirk for ThinkPad P1 Gen 6
  ...

Pull regulator fix from Mark Brown:
 "A trivial typo fix that came in during the merge window"

* tag 'regulator-fix-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: consumer.rst: fix 'regulator_enable' typo.

Pull ksmbd server fixes from Steve French:
 "Ten ksmbd server fixes, including some important security fixes:

   - Two use after free fixes

   - Fix RCU callback race

   - Deadlock fix

   - Three patches to prevent session setup attacks

   - Prevent guest users from establishing multichannel sessions

   - Fix null pointer dereference in query FS info

   - Memleak fix"

* tag '6.4-rc-ksmbd-server-fixes-part2' of git://git.samba.org/ksmbd:
  ksmbd: call rcu_barrier() in ksmbd_server_exit()
  ksmbd: fix racy issue under cocurrent smb2 tree disconnect
  ksmbd: fix racy issue from smb2 close and logoff with multichannel
  ksmbd: not allow guest user on multichannel
  ksmbd: fix deadlock in ksmbd_find_crypto_ctx()
  ksmbd: block asynchronous requests when making a delay on session setup
  ksmbd: destroy expired sessions
  ksmbd: fix racy issue from session setup and logoff
  ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem()
  ksmbd: fix memleak in session setup

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - sched: act_pedit: free pedit keys on bail from offset check

  Current release - new code bugs:

   - pds_core:
      - Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
      - fix mutex double unlock in error path

  Previous releases - regressions:

   - sched: cls_api: remove block_cb from driver_list before freeing

   - nf_tables: fix ct untracked match breakage

   - eth: mtk_eth_soc: drop generic vlan rx offload

   - sched: flower: fix error handler on replace

  Previous releases - always broken:

   - tcp: fix skb_copy_ubufs() vs BIG TCP

   - ipv6: fix skb hash for some RST packets

   - af_packet: don't send zero-byte data in packet_sendmsg_spkt()

   - rxrpc: timeout handling fixes after moving client call connection
     to the I/O thread

   - ixgbe: fix panic during XDP_TX with > 64 CPUs

   - igc: RMW the SRRCTL register to prevent losing timestamp config

   - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621

   - r8152:
      - fix flow control issue of RTL8156A
      - fix the poor throughput for 2.5G devices
      - move setting r8153b_rx_agg_chg_indicate() to fix coalescing
      - enable autosuspend

   - ncsi: clear Tx enable mode when handling a Config required AEN

   - octeontx2-pf: macsec: fixes for CN10KB ASIC rev

  Misc:

   - 9p: remove INET dependency"

* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
  pds_core: fix mutex double unlock in error path
  net/sched: flower: fix error handler on replace
  Revert "net/sched: flower: Fix wrong handle assignment during filter change"
  net/sched: flower: fix filter idr initialization
  net: fec: correct the counting of XDP sent frames
  bonding: add xdp_features support
  net: enetc: check the index of the SFI rather than the handle
  sfc: Add back mailing list
  virtio_net: suppress cpu stall when free_unused_bufs
  ice: block LAN in case of VF to VF offload
  net: dsa: mt7530: fix network connectivity with multiple CPU ports
  net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
  9p: Remove INET dependency
  netfilter: nf_tables: fix ct untracked match breakage
  af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
  igc: read before write to SRRCTL register
  pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
  pds_core: remove CONFIG_DEBUG_FS from makefile
  ionic: catch failure from devlink_alloc
  ...

Pull more i2c updates from Wolfram Sang:
 "Some more driver bugfixes and a DT binding conversion"

* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  dt-bindings: i2c: brcm,kona-i2c: convert to YAML
  i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
  i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
  i2c: omap: Fix standard mode false ACK readings
  i2c: tegra: Fix PEC support for SMBUS block read

Commit 0da6e5fd ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.

As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.

Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There's a fix which landed in net-next, pull it in along
with the couple of minor cleanups.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull devicetree fixes from Rob Herring:

 - Add Conor Dooley as a DT binding maintainer

 - Swap the order of parsing /memreserve/ and /reserved-memory nodes so
   that the /reserved-memory nodes which have more information are
   handled first

 - Fix some property dependencies in riscv,pmu binding

 - Update maintainers entries on a couple of bindings

* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: add Conor as a dt-bindings maintainer
  dt-bindings: perf: riscv,pmu: fix property dependencies
  dt-bindings: xilinx: Remove Naga from memory and mtd bindings
  of: fdt: Scan /memreserve/ last
  dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
  dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
  dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
  dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro

Pull more documentation updates from Jonathan Corbet:
 "A handful of late-arriving documentation fixes, plus one Spanish
  translation that has been ready for some time but got applied late"

* tag 'docs-6.4-2' of git://git.lwn.net/linux:
  docs/sp_SP: Add translation of process/adding-syscalls
  CREDITS: Update email address for Mat Martineau
  Documentation: update kernel stack for x86_64
  docs: Remove unnecessary unicode character
  docs: fix "Reviewd" typo
  Documentation: timers: hrtimers: Make hybrid union historical
  docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
  doc:it_IT: fix some typos

Pull more tracing updates from Steven Rostedt:

 - Make buffer_percent read/write.

   The buffer_percent file is how users can state how long to block on
   the tracing buffer depending on how much is in the buffer. When it
   hits the "buffer_percent" it will wake the task waiting on the
   buffer. For some reason it was set to read-only.

   This was not noticed because testing was done as root without
   SELinux, but with SELinux it will prevent even root to write to it
   without having CAP_DAC_OVERRIDE.

 - The "touched_functions" was added this merge window, but one of the
   reasons for adding it was not implemented.

   That was to show what functions were not only touched, but had either
   a direct trampoline attached to it, or a kprobe or live kernel
   patching that can "hijack" the function to run a different function.
   The point is to know if there's functions in the kernel that may not
   be behaving as the kernel code shows. This can be used for debugging.

   TODO: Add this information to kernel oops too.

* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
  tracing: Fix permissions for the buffer_percent file

Pull locking updates from Ingo Molnar:

 - Introduce local{,64}_try_cmpxchg() - a slightly more optimal
   primitive, which will be used in perf events ring-buffer code

 - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation

 - Misc cleanups/fixes

* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: Correct (cmp)xchg() instrumentation
  locking/x86: Define arch_try_cmpxchg_local()
  locking/arch: Wire up local_try_cmpxchg()
  locking/generic: Wire up local{,64}_try_cmpxchg()
  locking/atomic: Add generic try_cmpxchg{,64}_local() support
  locking/rwbase: Mitigate indefinite writer starvation
  locking/arch: Rename all internal __xchg() names to __arch_xchg()

Merge my x86 uaccess updates branch.

The LAM ("Linear Address Masking") updates in this release made me
unhappy about how "access_ok()" was done, and it actually turned out to
have a couple of small bugs in it too.  This is my cleanup of the code:

 - use the sign bit of the __user pointer rather than masking the
   address and checking it against the TASK_SIZE range.

   We already did this part for the get/put_user() side, but
   'access_ok()' did the naïve "mask and range check" thing, which not
   only generates nasty code, but also ended up meaning that __access_ok
   itself didn't do a good job, and so copy_from_user_nmi() didn't get
   the check right.

 - move all the code that is 64-bit only into the 64-bit version of the
   header file, so that we don't unnecessarily pollute the shared x86
   code and make it look like LAM might work in 32-bit too.

 - fix a bug in the address masking (that doesn't end up mattering: in
   this case the fix was to just remove the buggy code entirely).

 - a couple of trivial cleanups and added commentary about the
   access_ok() rules.

* x86-uaccess-cleanup:
  x86-64: mm: clarify the 'positive addresses' user address rules
  x86: mm: remove 'sign' games from LAM untagged_addr*() macros
  x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
  x86: mm: remove architecture-specific 'access_ok()' define
  x86-64: make access_ok() independent of LAM

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for hibernation

 - The .rela.dyn section has been moved to the init area

 - A fix for the SBI probing to allow for implementation-defined
   behavior

 - Various other fixes and cleanups throughout the tree

* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: include cpufeature.h in cpufeature.c
  riscv: Move .rela.dyn to the init sections
  dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
  riscv: compat_syscall_table: Fixup compile warning
  RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
  RISC-V: fix sifive and thead section mismatches in errata
  RISC-V: Align SBI probe implementation with spec
  riscv: mm: remove redundant parameter of create_fdt_early_page_table
  riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
  RISC-V: Add arch functions to support hibernation/suspend-to-disk
  RISC-V: mm: Enable huge page support to kernel_page_present() function
  RISC-V: Factor out common code of __cpu_resume_enter()
  RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function

Pull more kvm updates from Paolo Bonzini:
 "This includes the 6.4 changes for RISC-V, and a few bugfix patches for
  other architectures. For x86, this closes a longstanding performance
  issue in the newer and (usually) more scalable page table management
  code.

  RISC-V:
   - ONE_REG interface to enable/disable SBI extensions
   - Zbb extension for Guest/VM
   - AIA CSR virtualization

  x86:
   - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU
     can result in the root being freed even though the root is
     completely valid and can be reused as-is (with a TLB flush).

  s390:
   - A couple of bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix race in gmap_make_secure()
  KVM: s390: pv: fix asynchronous teardown for small VMs
  KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated
  RISC-V: KVM: Virtualize per-HART AIA CSRs
  RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask
  RISC-V: KVM: Add ONE_REG interface for AIA CSRs
  RISC-V: KVM: Implement subtype for CSR ONE_REG interface
  RISC-V: KVM: Initial skeletal support for AIA
  RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines
  RISC-V: Detect AIA CSRs from ISA string
  RISC-V: Add AIA related CSR defines
  RISC-V: KVM: Allow Zbb extension for Guest/VM
  RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions
  RISC-V: KVM: Alphabetize selects
  KVM: RISC-V: Retry fault if vma_lookup() results become invalid

Pull ACPI fix from Rafael Wysocki:
 "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during
  the 6.3 cycle, that turned out to do more harm than help (Hans de
  Goede)"

* tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530