- 04 Apr, 2019 13 commits
-
-
Bart Van Assche authored
This patch avoids that a kernel warning appears when smp_processor_id() is called with preempt debugging enabled. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Remove those functions that are not called from outside the removed functions. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but avoids that the compiler complains about set-but-not-used variables when building with W=1. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
Arrays should be defined in .c files instead of in a header file. This patch reduces the size of the lpfc kernel module. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that the compiler warns about missing fall-through annotation when building with W=1. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoid that smatch complains about misleading indentation. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
This patch avoids that the compiler complains about missing declarations when building with W=1. Cc: James Smart <james.smart@broadcom.com> Signed-off-by:
-
Stanley Chu authored
"<name>-fixed-regulator" device tree property can be safely removed because below things are fixed or resolved, 1. "<name>-max-microamp" becomes optional property: Undefined "<name>-max-microamp" will not cause initialization fail if "<name>-fixed-regulator" is not defined. 2. Current switching operation (by regulator_set_load) now has rules: Regulators will have undefined current limit if "<name>-fixed-regulator" is not defined. But this is safe because only regulator which has configured current limit from "<name>-max-microamp" property is allowed to change its load. Although "<name>-fixed-regulator" is not used in any dt-bindings in tree, this patch is still safe for regulators already defined "<name>-fixed-regulator". To be more clear, if a regulator defined "<name>-fixed-regulator" before, the behavior difference after this patch is, 1. "<name>-max-microamp": If a regulator defined "<name>-fixed-regulator", it is not necessary to define "<name>-max-microamp" property in device tree and it is expected to have an undefined current limit, i.e., "max_uA" field is zero in struct ufs_vreg. This is exactly the same as patched. 2. "vcc-supply-1p8" or volatge range settings: * For vcc, vccq or vccq2, these three regulators shall not define "<name>-fixed-regulator" because defining it will lead to undefined voltage range and thus voltage switching will be unexpected. * For other regulators with undefined voltage range, voltage range will be still undefined after patched. Therefore this patch is safe for all existed regulators with "<name>-fixed-regulator" property already defined. Signed-off-by:Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Acked-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
Stanley Chu authored
In dt-bindings for ufs, "<name>-max-microamp" property indicates current limit and is mandatory if "<name>-fixed-regulator" is not defined on a specified regulator. However, in some platforms, regulators without "<name>-fixed-regulator" property may not need to define their current limit because they may want to define voltage range only for proper voltage switching in different power modes, especially for vcc, vccq or vccq2. Currently missing "<name>-max-microamp" property in device tree will lead initialization to fail, thus such limitation shall be resolved to tolerate this kind of regulators. After resolving this, regulators without "<name>-max-microamp" property will have undefined "max current" value, i.e., zero value in "max_uA" field in struct ufs_vreg. Because we do bypass current switching operation (by regulator_set_load) in case of undefined current limit, this patch shall be safe. Signed-off-by:
-
Stanley Chu authored
Currently if a regulator has "<name>-fixed-regulator" property in device tree, it will skip current limit initialization. This lead to a zero "max_uA" value in struct ufs_vreg. However, "regulator_set_load" operation shall be required on regulators which have valid current limits, otherwise a zero "max_uA" set by "regulator_set_load" may cause unexpected behavior when this regulator is enabled or set as high power mode. Similarly, in device's icc_level configuration flow, the target icc_level shall be updated if regulator also has valid current limit, otherwise a wrong icc_level will be calculated by zero "max_uA" and thus causes unexpected results after it is written to device. Signed-off-by:
-
Stanley Chu authored
For regulators used by UFS, vcc, vccq and vccq2 will have voltage range initialized by ufshcd_populate_vreg(), however other regulators may have undefined voltage range if dt-bindings have no such definition. In above undefined case, both "min_uV" and "max_uV" fields in ufs_vreg struct will be zero values and these values will be configured on regulators in different power modes. Currently this may have no harm if both "min_uV" and "max_uV" always keep "zero values" because regulator_set_voltage() will always bypass such invalid values and return "good" results. However improper values shall be fixed to avoid potential bugs. Simply bypass voltage configuration if voltage range is not defined. Signed-off-by:
-
Stanley Chu authored
There are two fields related to regulator current limit in struct ufs_vreg: "min_uA" and "max_uA". "max_uA" is probed by "<name>-max-microamp" property from device tree and used for - regulator_set_load operations - icc_level configuration in device However "min_uA" field is not used anywhere, thus we can remove it. Signed-off-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Reviewed-by:
-
Ding Xiang authored
The rc variable is not needed in bnx2fc_abts_cleanup(). Remove it and just return SUCCESS. [mkp: commit desc] Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Acked-by:
Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
- 28 Mar, 2019 27 commits
-
-
Saurav Kashyap authored
- Update the driver version. Signed-off-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
- lport was getting used without initialization, initialize it to fix a warning. Signed-off-by:
-
Saurav Kashyap authored
- Handle refcount of rdata during error conditions. Signed-off-by:
-
Shyam Sundar authored
Here is the relevant logs for the problem we are solving: qedf_flush_active_ios:1707]:3: Flush active i/o's num=0x17 fcport=0xffff948168fbcc80 port_id=0x550200 scsi_id=0. qedf_flush_active_ios:1708]:3: Locking flush mutex. qedf_flush_active_ios:1758]:3: Not outstanding, xid=0xaaf, cmd_type=3 refcount=1. qedf_flush_active_ios:1896]:3: Flushed 0x16 I/Os, active=0x1. qedf_flush_active_ios:1901]:3: Flushed 0x16 I/Os, active=0x1 cnt=60. qedf_send_rrq:295]:3: Sending RRQ orig io = ffffb48b8f7d7158, orig_xid = 0xaaf qedf_initiate_els:37]:3: Sending ELS qedf_initiate_els:68]:3: initiate_els els_req = 0xffffb48b8f6d3098 cb_arg = ffff948fd5e4de80 xid = 4c6 qedf_init_mp_req:2172]:3: Entered. qedf_init_mp_task:727]:3: Initializing MP task for cmd_type=4 qedf_initiate_els:134]:3: Ringing doorbell for ELS req qedf_flush_active_ios:1901]:3: Flushed 0x16 I/Os, active=0x2 cnt=20. qedf_cmd_timeout:96]:3: ELS timeout, xid=0x4c6. qedf_rrq_compl:186]:3: Entered. qedf_rrq_compl:204]:3: rrq_compl: orig io = ffffb48b8f7d7158, orig xid = 0xaaf, rrq_xid = 0x4c6, refcount=1 qedf_flush_active_ios:1935]:3: Unlocking flush mutex. qedf_upload_connection:1579]:3: Uploading connection port_id=550200. We found an ABTS command for which CMD_OUTSTANDING was cleared (line 3). For this command, delayed send_rrq was queued, but would take 10 secs to execute. Adding capability to detect that (based on io_req->state that is being introduced), and attempt to cancel rrq_work. If we succeed, we drop the reference and free the io_req. If we cannot, then the els will get sent out and we will wait for 10 secs for it to complete. Signed-off-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
cmd_type is over written to QEDF_CLEANUP during cleanup, so check for tm_flags. Signed-off-by:
-
Shyam Sundar authored
- The flag will help in to figure out if io_req is cleaned or not. Signed-off-by:
-
Saurav Kashyap authored
- Command is already completed with underrun so no need to send ABTS. Signed-off-by:
-
Shyam Sundar authored
- I/Os, aborts and tmf should not be queued if flush is in progress. Signed-off-by:
-
Chad Dupuis authored
- Check proper values before servicing CVL. Signed-off-by:
Chad Dupuis <cdupuis@marvell.com> Signed-off-by:
-
Hannes Reinecke authored
The fc_rport_priv structure is reference counted, so we need to ensure that the reference is increased before accessing the structure. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Chad Dupuis authored
On completions where we do not have a bad scsi_cmnd pointer we should return before the the label lest we do a double kref_put. Signed-off-by:
-
Chad Dupuis authored
- Wait for all the connections to get uploaded. Signed-off-by:
-
Chad Dupuis authored
- Check the validity of various pointers before processing. Signed-off-by:
-
Hannes Reinecke authored
test_bit() is atomic, test_bit() || test_bit() is not. So protect consecutive bit tests with a lock to avoid races. Signed-off-by:
-
Hannes Reinecke authored
fc_rport_create() needs to be called with disc_mutex held. And we should re-assign the 'rdata' pointer in case it got changed. Signed-off-by:
-
Hannes Reinecke authored
qedf_xmit() calls fc_rport_lookup(), but discards the returned rdata structure almost immediately without decreasing the refcount. This leads to a refcount leak and the rdata never to be freed. Signed-off-by:
-
Saurav Kashyap authored
- Check if link is UP before sending and processing any packets on wire. Signed-off-by:
-
Chad Dupuis authored
When receiving an unsolicited frame we could crash on a list traversal in fc_rport_lookup while searching the rport which is associated with our lport. Initialize the lport's discovery node after allocating the lport in __qedf_probe(). Signed-off-by:
-
Andrew Vasquez authored
- Correct memory barriers to make sure all cmnds are flushed. Signed-off-by:
Andrew Vasquez <andrewv@marvell.com> Signed-off-by:
-
Chad Dupuis authored
- If a TMF and cleanup are issued at the same time they could cause a call trace if issued against the same xid as the io_req->tm_done completion is used for both. - Set and clear cleanup bit in cleanup routine. Signed-off-by:
-
Saurav Kashyap authored
An I/O can be in any state when flush is called, it can be in abort, waiting for abort, RRQ send and waiting or TMF send. - HZ can be different on different architecture, correctly set abort timeout value. - Flush can complete the I/Os prematurely, handle refcount for aborted I/Os and for which RRQ is pending. - Differentiate LUN/TARGET reset, as cleanup needs to be send to firmware accordingly. - Add flush mutex to sync cleanup call from abort and flush routine. - Clear abort/outstanding bit on timeout. Signed-off-by:
Shyam Sundar <shyam.sundar@marvell.com> Signed-off-by:
-
Shyam Sundar authored
The purpose of flush routine is to cleanup I/Os to the firmware and complete them to scsi middle layer. This routine is invoked before connection is uploaded because of rport going away. - Don't process any I/Os, aborts, TMFs coming when flush in progress. - Add flags to handle cleanup and release of I/Os because flush can prematurely complete I/Os. - Original command can get completed to driver when cleanup for same is posted to firmware, handle this condition. - Modify flush to handle I/Os in all the states like abort, TMF, RRQ and timeouts. Signed-off-by:
-
Chad Dupuis authored
When mapping the pages from a scatter/gather list from the SCSI layer we only need to follow these rules: - Max SGEs for each I/O request is 256 - No size limit on each SGE - No need to split OS provided SGEs to 4K before sending to firmware. - Slow SGE is applicable only when: - There are > 8 SGEs and any middle SGE is less than a page size (4K) Make necessary changes so that driver follows these rules. Applicable only for Write requests (not for Read requests). No need to check SGE address alignment requirements (first, middle or last) before declaring slow SGE. Signed-off-by:
-
Chad Dupuis authored
Fixes the following crash as the return was missing from the check if an fcport is offloaded. If we hit this code we continue to try to post an invalid task which can lead to the crash: [30259.616411] [0000:61:00.3]:[qedf_post_io_req:989]:3: Session not offloaded yet. [30259.616413] [0000:61:00.3]:[qedf_upload_connection:1340]:3: Uploading connection port_id=490020. [30259.623769] BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 [30259.631645] IP: [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.638816] PGD 0 [30259.640841] Oops: 0000 [#1] SMP [30259.644098] Modules linked in: fuse xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables devlink ip6table_filter ip6_tables iptable_filter vfat fat ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib ib_ucm ib_umad dm_service_time skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel rpcrdma sunrpc rdma_ucm ib_uverbs lrw gf128mul ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi qedr(OE) glue_helper ablk_helper cryptd ib_core dm_round_robin joydev pcspkr ipmi_ssif ses enclosure ipmi_si ipmi_devintf ipmi_msghandler mei_me [30259.715529] mei sg hpilo hpwdt shpchp wmi lpc_ich acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic uas usb_storage mgag200 qedf(OE) i2c_algo_bit libfcoe drm_kms_helper libfc syscopyarea sysfillrect scsi_transport_fc qede(OE) sysimgblt fb_sys_fops ptp ttm pps_core drm qed(OE) smartpqi crct10dif_pclmul crct10dif_common crc32c_intel i2c_core scsi_transport_sas scsi_tgt dm_mirror dm_region_hash dm_log dm_mod [30259.754237] CPU: 9 PID: 977 Comm: kdmwork-253:7 Kdump: loaded Tainted: G W OE ------------ 3.10.0-862.el7.x86_64 #1 [30259.765664] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/04/2018 [30259.775000] task: ffff8c801efd0000 ti: ffff8c801efd8000 task.ti: ffff8c801efd8000 [30259.782505] RIP: 0010:[<ffffffffc035b1ed>] [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.792116] RSP: 0018:ffff8c801efdbbb0 EFLAGS: 00010046 [30259.797444] RAX: 0000000000000000 RBX: ffffa7f1450948d8 RCX: ffff8c7fe5bc40c8 [30259.804600] RDX: ffff8c800715b300 RSI: ffffa7f1450948d8 RDI: ffff8c80169c2480 [30259.811755] RBP: ffff8c801efdbc30 R08: 00000000000000ae R09: ffff8c800a314540 [30259.818911] R10: ffff8c7fe5bc40c8 R11: ffff8c801efdb8ae R12: 0000000000000000 [30259.826068] R13: ffff8c800715b300 R14: ffff8c80169c2480 R15: ffff8c8005da28e0 [30259.833223] FS: 0000000000000000(0000) GS:ffff8c803f840000(0000) knlGS:0000000000000000 [30259.841338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [30259.847100] CR2: 0000000000000198 CR3: 000000081242e000 CR4: 00000000007607e0 [30259.854256] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [30259.861412] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [30259.868568] PKRU: 00000000 [30259.871278] Call Trace: [30259.873737] [<ffffffffc035c948>] qedf_post_io_req+0x148/0x680 [qedf] [30259.880201] [<ffffffffc035d070>] qedf_queuecommand+0x1f0/0x240 [qedf] [30259.886749] [<ffffffffa329b050>] scsi_dispatch_cmd+0xb0/0x240 [30259.892600] [<ffffffffa32a45bc>] scsi_request_fn+0x4cc/0x680 [30259.898364] [<ffffffffa3118ad9>] __blk_run_queue+0x39/0x50 [30259.903954] [<ffffffffa3114393>] __elv_add_request+0xd3/0x260 [30259.909805] [<ffffffffa311baf0>] blk_insert_cloned_request+0xf0/0x1b0 [30259.916358] [<ffffffffc010b622>] map_request+0x142/0x220 [dm_mod] [30259.922560] [<ffffffffc010b716>] map_tio_request+0x16/0x40 [dm_mod] [30259.928932] [<ffffffffa2ebb1f5>] kthread_worker_fn+0x85/0x180 [30259.934782] [<ffffffffa2ebb170>] ? kthread_stop+0xf0/0xf0 [30259.940284] [<ffffffffa2ebae31>] kthread+0xd1/0xe0 [30259.945176] [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40 [30259.951290] [<ffffffffa351f61d>] ret_from_fork_nospec_begin+0x7/0x21 [30259.957750] [<ffffffffa2ebad60>] ? insert_kthread_work+0x40/0x40 [30259.963860] Code: fe 41 55 49 89 d5 41 54 53 48 89 f3 48 83 ec 58 4c 8b 67 28 4c 8b 4e 18 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 4c 8b 7e 58 <49> 8b 84 24 98 01 00 00 48 8b 00 f6 80 31 01 00 00 10 0f 85 0b [30259.983372] RIP [<ffffffffc035b1ed>] qedf_init_task.isra.16+0x3d/0x450 [qedf] [30259.990630] RSP <ffff8c801efdbbb0> [30259.994127] CR2: 0000000000000198 Signed-off-by:
-
Chad Dupuis authored
There is currently an overlap where exchange IDs between what is used for offloaded commands and by libfc for ELS commands. Correct this so that exchange ID range is: Offloaded requests: 0 to 0xfff libfc requests: 0x1000 to 0xfffe Signed-off-by:
-
Chad Dupuis authored
If we cannot allocate an ELS middlepath request, simply fail instead of trying to delay and then reallocate. This delay logic is causing soft lockup messages: NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:1:7639] Modules linked in: xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter dm_service_time vfat fat rpcrdma sunrpc ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support qedr(OE) ib_core joydev ipmi_ssif pcspkr hpilo hpwdt sg ipmi_si ipmi_devintf ipmi_msghandler ioatdma shpchp lpc_ich wmi dca acpi_power_meter dm_multipath ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic qedf(OE) libfcoe mgag200 libfc i2c_algo_bit drm_kms_helper scsi_transport_fc qede(OE) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm qed(OE) drm crct10dif_pclmul e1000e crct10dif_common crc32c_intel scsi_tgt hpsa i2c_core ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 7639 Comm: kworker/2:1 Kdump: loaded Tainted: G OEL ------------ 3.10.0-861.el7.x86_64 #1 Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 07/21/2016 Workqueue: qedf_2_dpc qedf_handle_rrq [qedf] task: ffff959edd628fd0 ti: ffff959ed6f08000 task.ti: ffff959ed6f08000 RIP: 0010:[<ffffffff8355913a>] [<ffffffff8355913a>] delay_tsc+0x3a/0x60 RSP: 0018:ffff959ed6f0bd30 EFLAGS: 00000246 RAX: 000000008ef5f791 RBX: 5f646d635f666465 RCX: 0000025b8ededa2f RDX: 000000000000025b RSI: 0000000000000002 RDI: 0000000000217d1e RBP: ffff959ed6f0bd30 R08: ffffffffc079aae8 R09: 0000000000000200 R10: ffffffffc07952c6 R11: 0000000000000000 R12: 6c6c615f66646571 R13: ffff959ed6f0bcc8 R14: ffff959ed6f0bd08 R15: ffff959e00000028 FS: 0000000000000000(0000) GS:ffff959eff480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4117fa1eb0 CR3: 0000002039e66000 CR4: 00000000003607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff8355907d>] __const_udelay+0x2d/0x30 [<ffffffffc079444a>] qedf_initiate_els+0x13a/0x450 [qedf] [<ffffffffc0794210>] ? qedf_srr_compl+0x2a0/0x2a0 [qedf] [<ffffffffc0795337>] qedf_send_rrq+0x127/0x230 [qedf] [<ffffffffc078ed55>] qedf_handle_rrq+0x15/0x20 [qedf] [<ffffffff832b2dff>] process_one_work+0x17f/0x440 [<ffffffff832b3ac6>] worker_thread+0x126/0x3c0 [<ffffffff832b39a0>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff832bae31>] kthread+0xd1/0xe0 [<ffffffff832bad60>] ? insert_kthread_work+0x40/0x40 [<ffffffff8391f637>] ret_from_fork_nospec_begin+0x21/0x21 [<ffffffff832bad60>] ? insert_kthread_work+0x40/0x40 Signed-off-by:
-
Stanley Chu authored
Signed-off-by:
-
