This is the initial amplifier driver for rt1011.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a couple of new debugfs entries "ipc_flood_count"
and "ipc_flood_duration_ms" that can be used to
execute the IPC flood test. "ipc_flood_count" floods the DSP
with the number of test IPCs specified and ipc_flood_duration_ms
floods the DSP with test IPC's for the duration(in ms) specified.
The test stats such as average, min and max IPC response times
are logged in the dmesg and saved in the debugfs entry cache buffer.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a new class of IPC command along with the first
test type, IPC_FLOOD, which will be used for flooding the DSP
with IPCs.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Timer will be reset when DSP is powered down. So the time stamp of trace
log will be reset after resume. Send time stamp to FW can align the time
stamp and avoid reset time stamp in trace log.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add enumerations to support mux/demux processing component.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The definitions for DSP oops structures were not aligned
correctly to current FW ABI version 3.6.0, leading to
invalid data being printed out to debug logs. Fix the structs
and update related platform code accordingly.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add soundwire dai type and update ABI version.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The HIPCCTL register controls the IPC interrupts. It can be set or
cleared to mask or enable these interrupts, but it makes no sense to
read and test its fields in an interrupt (which can only executed if
its fields are set).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Align with Skylake driver and enable the IRQ at end of handler,
instead of at beginning.

Also add an error log if we have nothing to do in this handler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Align with hardware recommended sequences, and read all IPC registers
before doing any other actions. Playing with BUSY and DONE bits may
invalidate values.

The values read may not actually be necessary but at least this
provides a snapshot of the IPC registers with no consistency issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Align with Skylake driver and enable the IRQ at end of handler,
instead of at beginning.

Also add an error log if we have nothing to do in this handler.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Move all register access to cnl_ipc_host_done()
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Align with hardware recommended sequences, and read all IPC registers
before doing any other actions. Playing with BUSY and DONE bits may
invalidate values.

The values read may not actually be necessary but at least this
provides a snapshot of the IPC registers with no consistency issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We use shim registers only to notify the other
side that a message was sent. The actual information
for the message is transmitted via mailbox.

cmd information inside shim register is not used by
the DSP, so we remove it to avoid confusion.
Signed-off-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add mode parameter for snd_sof_debugfs_buf_item() to specify
the mode while creating debugfs entries.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Using component driver as a name is not unique and it breaks audio in
certain configurations, e.g. Hardkernel Odroid XU3 board where following
components are registered:
 - "3830000.i2s" with driver name "snd_dmaengine_pcm"
 - "3830000.i2s-sec" with driver name "snd_dmaengine_pcm"
 - "3830000.i2s" with driver name "samsung-i2s"

This reverts commit b19671d6.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support of identification registers in STM32 SAI.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

HDA_DEV_ASOC type codec device refcounts are managed differently
from HDA_DEV_LEGACY devices. The refcount is released explicitly
in snd_hdac_ext_bus_device_remove() for ASOC type devices.
So, remove the put_device() call in snd_hda_codec_dev_free()
for such devices to make the refcount balanced. This will prevent
the NULL pointer exception when the codec driver is released
after the card is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Previously the structure used bitfields, which do not guarantee bit
ordering.

This change makes sure the order is clearly defined.  It also renames
and repurposes the field for general use.
Signed-off-by: Slawomir Blauciak <slawomir.blauciak@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We had a couple of misses with ABI changes, e.g. for Xtensa oops
information and the integration of sound trigger, before we set-up a
formal process to track evolutions.

With this patch, the SOF kernel patches are officially aligned with
the firmware 3.6 level. Changing this level has no impact on existing
users and is fully backwards-compatible.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add soundwire dai type and update ABI version.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We missed these two definitions for GDB support and component
notifications, they are defined for the SOF firmware. Since they are
not used by the kernel so far, we can still add them without any ABI
change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This tablet has an incorrect acpi identifier just like
Thinkpad10 tablet, which is why it is trying to load the RT5640 driver
instead of the RT5762 driver. The RT5640 driver, on the other hand, checks
the hardware ID, so no driver are loaded during boot. This fix resolves to
load the RT5672 driver on this tablet during boot. It also provides the
correct IO configuration, like the jack detect mode 3, for 1.8V pullup. I
would like to thank Pierre-Louis Bossart for helping with this patch.
Signed-off-by: Kovács Tamás <kepszlok@zohomail.eu>
Signed-off-by: Mark Brown <broonie@kernel.org>

There are already defined ppcap and ppcap interrupt functions, use
the already defined functions for easy code read.

Fixes: 8a300c8f ("ASoC: SOF: Intel: Add HDA controller for Intel DSP")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add COMPILE_TEST and use IS_ENABLED(CONFIG_PCI) to sort out
cross-compilation issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We recently added COMPILE_TEST but new machine drivers were not
updated. Fix.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This is not needed. Probably a copy/paste that was never removed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

skl-ssp-clk.c does not build on IA64 because the driver
uses the common clock interface, so make the driver depend
on COMMON_CLK.

Fixes this build error:
../sound/soc/intel/skylake/skl-ssp-clk.c:26:16: error: field 'hw' has incomplete type
  struct clk_hw hw;
                ^~
[Corrections for SKL support by Pierre Bossart]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Jie Yang <yang.jie@linux.intel.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

We have duplicated code in multiple locations (atom, machine drivers,
SOF) to detect Baytrail, Cherrytrail and other SOCs. This is not very
elegant, and introduces dependencies on CONFIG_X86 that prevent
COMPILE_TEST from working.

Add common helpers to provide same functionality in a cleaner
way. This will also help support the DMI-based quirks being introduced
to handle SOF/SST autodetection.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Most of the voice activation definitions were missing, they will be
needed for when hotwording is added. Also the source bits are only 2
wide not 3 and needed to be corrected.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

fmt_single_name() uses device name to determine component name.  If
multiple components bind to the same device, the debugfs creation in
soc_init_component_debugfs() would fail due to duplicated entity
names.

Name provided by component driver is unique enough to represent each
component.  Use component driver name as the component name to avoid
name duplication.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

config: x86_64-randconfig-x000201921-201921
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        make ARCH=x86_64

sound/soc/codecs/cs42xx8.c: In function ‘cs42xx8_probe’:
sound/soc/codecs/cs42xx8.c:472:25: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_clk_get_optional’? [-Werror=implicit-function-declaration]
  cs42xx8->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
                         ^~~~~~~~~~~~~~~~~~~~~~~
                         devm_clk_get_optional
sound/soc/codecs/cs42xx8.c:473:8: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
        GPIOD_OUT_HIGH);
        ^~~~~~~~~~~~~~
        GPIOF_INIT_HIGH
sound/soc/codecs/cs42xx8.c:473:8: note: each undeclared identifier is reported only once for each function it appears in
sound/soc/codecs/cs42xx8.c:477:2: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean ‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
  gpiod_set_value_cansleep(cs42xx8->gpiod_reset, 0);
  ^~~~~~~~~~~~~~~~~~~~~~~~
  gpio_set_value_cansleep

Fixes: bfe95dfa ("ASoC: cs42xx8: Add reset gpio handling")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The sof-rt5682 machine driver supports both legacy Baytrail devices
and more recent ApolloLake/CometLake platforms. When only Baytrail is
selected, the compilation fails with the following errors:

ERROR: "hdac_hdmi_jack_port_init"
[sound/soc/intel/boards/snd-soc-sof_rt5682.ko] undefined!

ERROR: "hdac_hdmi_jack_init"
[sound/soc/intel/boards/snd-soc-sof_rt5682.ko] undefined!

Fix by selecting SND_SOC_HDAC_HDMI unconditionally. The code for HDMI
support is not reachable on Baytrail so this change has no functional
impact.

Fixes: f70abd75 ("ASoC: Intel: add sof-rt5682 machine driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

In wcd9335_codec_enable_dec(), 'widget_name' is allocated by kstrndup().
However, according to doc: "Note: Use kmemdup_nul() instead if the size
is known exactly." So we should use kmemdup_nul() here instead of
kstrndup().
Signed-off-by: Gen Zhang <blackgod016574@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Allwinner DAC seems to have a delay in the Speaker audio routing. When
playing a sound for the first time, the sound gets chopped. On a second
play the sound is played correctly. After some time (~5s) the issue gets
back.

This commit seems to be fixing the same issue as bf14da7e but
for another codepath.

This is the DTS that was used to debug the problem.

&codec {
        allwinner,pa-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */
        allwinner,audio-routing =
                "Speaker", "LINEOUT";

        status = "okay";
}
Signed-off-by: Georgii Staroselskii <georgii.staroselskii@emlid.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Allwinner H6 has a different mapping for the fifo register controller.

Actually only the fifo TX bit is used in the drivers.

Use the freshly introduced quirks to make this drivers compatible with
the Allwinner H6.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Allwinner H6 has a different bit to flush the TX FIFO.

Add a quirks to prepare introduction of H6 SoC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The quirks are actually defines in the middle of the file with
short explanation.

Move this at the top and add a section to have coherency with
sun4i-i2s.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>