Some architectures define their own arch_test_bit and they also need
arch_test_bit_acquire, otherwise they won't compile.  We also clean up
the code by using the generic test_bit if that is equivalent to the
arch-specific version.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8238b457 ("wait_on_bit: add an acquire memory barrier")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull arm64 fixes from Will Deacon:
 "A bumper crop of arm64 fixes for -rc3.

  The largest change is fixing our parsing of the 'rodata=full' command
  line option, which kstrtobool() started treating as 'rodata=false'.
  The fix actually makes the parsing of that option much less fragile
  and updates the documentation at the same time.

  We still have a boot issue pending when KASLR is disabled at compile
  time, but there's a fresh fix on the list which I'll send next week if
  it holds up to testing.

  Summary:

   - Fix workaround for Cortex-A76 erratum #1286807

   - Add workaround for AMU erratum #2457168 on Cortex-A510

   - Drop reference to removed CONFIG_ARCH_RANDOM #define

   - Fix parsing of the "rodata=full" cmdline option

   - Fix a bunch of issues in the SME register state switching and sigframe code

   - Fix incorrect extraction of the CTR_EL0.CWG register field

   - Fix ACPI cache topology probing when the PPTT is not present

   - Trivial comment and whitespace fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/sme: Don't flush SVE register state when handling SME traps
  arm64/sme: Don't flush SVE register state when allocating SME storage
  arm64/signal: Flush FPSIMD register state when disabling streaming mode
  arm64/signal: Raise limit on stack frames
  arm64/cache: Fix cache_type_cwg() for register generation
  arm64/sysreg: Guard SYS_FIELD_ macros for asm
  arm64/sysreg: Directly include bitfield.h
  arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level
  arm64: errata: add detection for AMEVCNTR01 incrementing incorrectly
  arm64: fix rodata=full
  arm64: Fix comment typo
  docs/arm64: elf_hwcaps: unify newlines in HWCAP lists
  arm64: adjust KASLR relocation after ARCH_RANDOM removal
  arm64: Fix match_list for erratum 1286807 on Arm Cortex-A76

Pull RISC-V fixes from Palmer Dabbelt:

 - A handful of fixes for the Microchip device trees

 - A pair of fixes to eliminate build warnings

* tag 'riscv-for-linus-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: microchip: mpfs: remove pci axi address translation property
  riscv: dts: microchip: mpfs: remove bogus card-detect-delay
  riscv: dts: microchip: mpfs: remove ti,fifo-depth property
  riscv: dts: microchip: mpfs: fix incorrect pcie child node name
  riscv: traps: add missing prototype
  riscv: signal: fix missing prototype warning
  riscv: dts: microchip: correct L2 cache interrupts

Merge tag 'loongarch-fixes-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a bunch of build errors/warnings, a poweroff error and an
  unbalanced locking in do_page_fault()"

* tag 'loongarch-fixes-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: mm: Avoid unnecessary page fault retires on shared memory types
  LoongArch: Add subword xchg/cmpxchg emulation
  LoongArch: Cleanup headers to avoid circular dependency
  LoongArch: Cleanup reset routines with new API
  LoongArch: Fix build warnings in VDSO
  LoongArch: Select PCI_QUIRKS to avoid build error

Pull drm fixes from Dave Airlie:
 "Weekly fixes, lots of amdgpu fixes mostly for IP blocks introduced in
  6.0-rc1, otherwise vc4, nouveau fixes.

  gem:
   - Fix handle release leak

  nouveau:
   - Fix fencing when moving BO

  vc4:
   - HDMI fixes

  amdgpu:
   - GFX 11.0 fixes
   - PSP XGMI handling fixes
   - GFX9 fix for compute-only IPs
   - Drop duplicated function call
   - Fix warning due to missing header
   - NBIO 7.7 fixes
   - DCN 3.1.4 fixes
   - SDMA 6.0 fixes
   - SMU 13.0 fixes
   - Arcturus GPUVM page table fix
   - MMHUB 1.0 fix

  amdkfd:
   - GC 10.3.7 fix

  radeon:
   - Delayed work flush fix"

* tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly
  drm/amdgpu: add MGCG perfmon setting for gfx11
  drm/amdkfd: Fix isa version for the GC 10.3.7
  drm/amdgpu: Fix page table setup on Arcturus
  drm/amd/pm: update SMU 13.0.0 driver_if header
  drm/amdgpu: add sdma instance check for gfx11 CGCG
  drm/amd/display: enable PCON support for dcn314
  drm/amdgpu: enable NBIO IP v7.7.0 Clock Gating
  drm/amdgpu: add NBIO IP v7.7.0 Clock Gating support
  drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0
  nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf
  drm/radeon: add a force flush to delay work when radeon
  drm/amd/display: Include missing header
  drm/amdgpu: Remove the additional kfd pre reset call for sriov
  drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.
  drm/amdgpu: fix hive reference leak when adding xgmi device
  drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini
  drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1
  drm/gem: Fix GEM handle release errors
  drm/vc4: hdmi: Rework power up
  ...

Pull block fixes from Jens Axboe:

 - MD pull request via Song:
      - Fix for clustered raid (Guoqing Jiang)
      - req_op fix (Bart Van Assche)
      - Fix race condition in raid recreate (David Sloan)

 - loop configuration overflow fix (Siddh)

 - Fix missing commit_rqs call for certain conditions (Yu)

* tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
  md: call __md_stop_writes in md_stop
  Revert "md-raid: destroy the bitmap after destroying the thread"
  md: Flush workqueue md_rdev_misc_wq in md_alloc()
  md/raid10: Fix the data type of an r10_sync_page_io() argument
  loop: Check for overflow while configuring loop
  blk-mq: fix io hung due to missing commit_rqs

Pull io_uring fixes from Jens Axboe:

 - Add missing header file to the MAINTAINERS entry for io_uring (Ammar)

 - liburing and the kernel ship the same io_uring.h header, but one
   change we've had for a long time only in liburing is to ensure it's
   C++ safe. Add extern C around it, so we can more easily sync them in
   the future (Ammar)

 - Fix an off-by-one in the sync cancel added in this merge window (me)

 - Error handling fix for passthrough (Kanchan)

 - Fix for address saving for async execution for the zc tx support
   (Pavel)

 - Fix ordering for TCP zc notifications, so we always have them ordered
   correctly between "data was sent" and "data was acked". This isn't
   strictly needed with the notification slots, but we've been pondering
   disabling the slot support for 6.0 - and if we do, then we do require
   the ordering to be sane. Regardless of that, it's the sane thing to
   do in terms of API (Pavel)

 - Minor cleanup for indentation and lockdep annotation (Pavel)

* tag 'io_uring-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
  io_uring/net: save address for sendzc async execution
  io_uring: conditional ->async_data allocation
  io_uring/notif: order notif vs send CQEs
  io_uring/net: fix indentation
  io_uring/net: fix zc send link failing
  io_uring/net: fix must_hold annotation
  io_uring: fix submission-failure handling for uring-cmd
  io_uring: fix off-by-one in sync cancelation file check
  io_uring: uapi: Add `extern "C"` in io_uring.h for liburing
  MAINTAINERS: Add `include/linux/io_uring_types.h`

Pull SCSI fixes from James Bottomley:
 "Ten fixes.

  Of the three core changes, the two large ones are a complete reversion
  of the async rework and an ALUA timing rework (the latter shouldn't
  affect non-ALUA paths).

  The remaining patches are all small and all but one in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Revert "Rework asynchronous resume support"
  scsi: core: Fix passthrough retry counter handling
  scsi: ufs: core: Reduce the power mode change timeout
  scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq
  scsi: ufs: host: ufs-exynos: Make fsd_ufs_drvs static
  scsi: megaraid_sas: Remove unnecessary kfree()
  scsi: megaraid_sas: Fix double kfree()
  scsi: ufs: core: Enable link lost interrupt
  scsi: core: Allow the ALUA transitioning state enough time
  scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX

There are several places in the kernel where wait_on_bit is not followed
by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read).

On architectures with weak memory ordering, it may happen that memory
accesses that follow wait_on_bit are reordered before wait_on_bit and
they may return invalid data.

Fix this class of bugs by introducing a new function "test_bit_acquire"
that works like test_bit, but has acquire memory ordering semantics.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'amd-drm-fixes-6.0-2022-08-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.0-2022-08-25:

amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix

amdkfd:
- GC 10.3.7 fix

radeon:
- Delayed work flush fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825181243.5853-1-alexander.deucher@amd.com

Short summary of fixes pull:

 * gem: Fixes handle release leak
 * nouveau: Fix fencing when moving BO
 * vc4: HDMI fixes
 * Backmerging for v6.0-rc1
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YwclSWheC+Ai+u+v@linux-uq9g

Merge branch 'riscv-variable_fixes_without_kvm' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git into fixes

This contains a pair of fixes for build-time warnings.

* 'riscv-variable_fixes_without_kvm' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git:
  riscv: traps: add missing prototype
  riscv: signal: fix missing prototype warning

Merge tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git into fixes

Microchip RISC-V devicetree fixes for 6.0-rc3

Two sets of fixes this time around:
- A fix for the interrupt ordering of the l2-cache controller. If the
  driver is enabled, it would spam the console /constantly/, rendering
  the system useless.
- General cleanup for some bogus properties in the dt, part of my quest
  for zero dtbs_check warnings.

On that note, the interrupt ordering adds a dtbs_check warning - but I
considered that fixing the potentially useless system was more of a
priority.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'dt-fixes-for-palmer-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git:
  riscv: dts: microchip: mpfs: remove pci axi address translation property
  riscv: dts: microchip: mpfs: remove bogus card-detect-delay
  riscv: dts: microchip: mpfs: remove ti,fifo-depth property
  riscv: dts: microchip: mpfs: fix incorrect pcie child node name
  riscv: dts: microchip: correct L2 cache interrupts

Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec and netfilter (with one broken Fixes tag).

  Current release - new code bugs:

   - dsa: don't dereference NULL extack in dsa_slave_changeupper()

   - dpaa: fix <1G ethernet on LS1046ARDB

   - neigh: don't call kfree_skb() under spin_lock_irqsave()

  Previous releases - regressions:

   - r8152: fix the RX FIFO settings when suspending

   - dsa: microchip: keep compatibility with device tree blobs with no
     phy-mode

   - Revert "net: macsec: update SCI upon MAC address change."

   - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367

  Previous releases - always broken:

   - netfilter: conntrack: work around exceeded TCP receive window

   - ipsec: fix a null pointer dereference of dst->dev on a metadata dst
     in xfrm_lookup_with_ifid

   - moxa: get rid of asymmetry in DMA mapping/unmapping

   - dsa: microchip: make learning configurable and keep it off while
     standalone

   - ice: xsk: prohibit usage of non-balanced queue id

   - rxrpc: fix locking in rxrpc's sendmsg

  Misc:

   - another chunk of sysctl data race silencing"

* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  net: lantiq_xrx200: restore buffer if memory allocation failed
  net: lantiq_xrx200: fix lock under memory pressure
  net: lantiq_xrx200: confirm skb is allocated before using
  net: stmmac: work around sporadic tx issue on link-up
  ionic: VF initial random MAC address if no assigned mac
  ionic: fix up issues with handling EAGAIN on FW cmds
  ionic: clear broken state on generation change
  rxrpc: Fix locking in rxrpc's sendmsg
  net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
  MAINTAINERS: rectify file entry in BONDING DRIVER
  i40e: Fix incorrect address type for IPv6 flow rules
  ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
  net: Fix a data-race around sysctl_somaxconn.
  net: Fix a data-race around netdev_unregister_timeout_secs.
  net: Fix a data-race around gro_normal_batch.
  net: Fix data-races around sysctl_devconf_inherit_init_net.
  net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
  net: Fix a data-race around netdev_budget_usecs.
  net: Fix data-races around sysctl_max_skb_frags.
  net: Fix a data-race around netdev_budget.
  ...

Aleksander Jan Bajkowski says:

====================
net: lantiq_xrx200: fix errors under memory pressure

This series fixes issues that can occur in the driver under memory pressure.
Situations when the system cannot allocate memory are rare, so the mentioned
bugs have been fixed recently. The patches have been tested on a BT Home
router with the Lantiq xRX200 chipset.

Changelog:
  v3: - removed netdev_err() log from the first patch
  v2:
   - the second patch has been changed, so that under memory pressure situation
     the driver will not receive packets indefinitely regardless of the NAPI budget,
   - the third patch has been added.
====================

Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In a situation where memory allocation fails, an invalid buffer address
is stored. When this descriptor is used again, the system panics in the
build_skb() function when accessing memory.

Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
function immediately returns an error.
This is incorrect for two reasons:
* the function terminates without enabling interrupts or scheduling NAPI,
* the error code (-ENOMEM) is returned instead of the number of received
packets.

After the first memory allocation failure occurs, packet reception is
locked due to disabled interrupts from DMA..

Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

xrx200_hw_receive() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.

Add a check in case build_skb() failed to allocate and return NULL.

Fixes: e0155935 ("net: lantiq_xrx200: convert to build_skb")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.

[0] https://www.spinics.net/lists/netdev/msg831526.html

Fixes: bfab27a1 ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)

This series contains updates to ixgbe and i40e drivers.

Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.

Sylwester corrects a check on source IP address when validating destination
for i40e.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix incorrect address type for IPv6 flow rules
  ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================

Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Shannon Nelson says:

====================
ionic: bug fixes

These are a couple of maintenance bug fixes for the Pensando ionic
networking driver.

Mohamed takes care of a "plays well with others" issue where the
VF spec is a bit vague on VF mac addresses, but certain customers
have come to expect behavior based on other vendor drivers.

Shannon addresses a couple of corner cases seen in internal
stress testing.
====================

Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers.  Handle the errors
where the older firmware does not allow the VF to set its own
station address.

Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.

Fixes: fbb39807 ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <mohamed@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW.  The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.

Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.

Fixes: fbfb8031 ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state.  This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails.  This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.

Fixes: 9e8eaf84 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix three bugs in the rxrpc's sendmsg implementation:

 (1) rxrpc_new_client_call() should release the socket lock when returning
     an error from rxrpc_get_call_slot().

 (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
     held in the event that we're interrupted by a signal whilst waiting
     for tx space on the socket or relocking the call mutex afterwards.

     Fix this by: (a) moving the unlock/lock of the call mutex up to
     rxrpc_send_data() such that the lock is not held around all of
     rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
     whether we're return with the lock dropped.  Note that this means
     recvmsg() will not block on this call whilst we're waiting.

 (3) After dropping and regaining the call mutex, rxrpc_send_data() needs
     to go and recheck the state of the tx_pending buffer and the
     tx_total_len check in case we raced with another sendmsg() on the same
     call.

Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg().  There's probably no need to make recvmsg() wait
for sendmsg().  It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.

Without fix (2), something like the following can be induced:

	WARNING: bad unlock balance detected!
	5.16.0-rc6-syzkaller #0 Not tainted
	-------------------------------------
	syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
	[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
	but there are no more locks to release!

	other info that might help us debug this:
	no locks held by syz-executor011/3597.
	...
	Call Trace:
	 <TASK>
	 __dump_stack lib/dump_stack.c:88 [inline]
	 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
	 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
	 __lock_release kernel/locking/lockdep.c:5306 [inline]
	 lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
	 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
	 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
	 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
	 sock_sendmsg_nosec net/socket.c:704 [inline]
	 sock_sendmsg+0xcf/0x120 net/socket.c:724
	 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
	 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
	 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
	 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
	 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]

Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
cc: Hawkins Jiawei <yin31149@gmail.com>
cc: Khalid Masum <khalid.masum.92@gmail.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Correct the isa version for handling KFD test.

Fixes: 7c4f4f19 ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.

Fixes: 352e683b ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DCN314 supports PCON.

[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull another cgroup fix from Tejun Heo:
 "Commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <->
  cpus_read_lock() deadlock") required the cgroup
  core to grab cpus_read_lock() before invoking ->attach().

  Unfortunately, it missed adding cpus_read_lock() in
  cgroup_attach_task_all(). Fix it"

* tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()

syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at
cpuset_attach() [1], for commit 4f7e7236 ("cgroup: Fix
threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that
cpuset_attach() is also called from cgroup_attach_task_all().
Add cpus_read_lock() like what cgroup_procs_write_start() does.

Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1]
Reported-by: syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock")
Signed-off-by: Tejun Heo <tj@kernel.org>

We usually copy all bits that a request needs from the userspace for
async execution, so the userspace can keep them on the stack. However,
send zerocopy violates this pattern for addresses and may reloads it
e.g. from io-wq. Save the address if any in ->async_data as usual.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7512d7aa9abcd36e9afe1a4d292a24cb2d157e5.1661342812.git.asml.silence@gmail.com
[axboe: fold in incremental fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit d9272525 ("mm: avoid unnecessary page fault retires on
shared memory types") modifies do_page_fault() to handle the VM_FAULT_
COMPLETED case, but forget to change for LoongArch, so fix it as other
architectures does.

Fixes: d9272525 ("mm: avoid unnecessary page fault retires on shared memory types")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch only support 32-bit/64-bit xchg/cmpxchg in native. But percpu
operation, qspinlock and some drivers need 8-bit/16-bit xchg/cmpxchg. We
add subword xchg/cmpxchg emulation in this patch because the emulation
has better performance than the generic implementation (on NUMA system),
and it can fix some build errors meanwhile [1].

LoongArch's guarantee for forward progress (avoid many ll/sc happening
at the same time and no one succeeds):

We have the "exclusive access (with timeout) of ll" feature to avoid
simultaneous ll (which also blocks other memory load/store on the same
address), and the "random delay of sc" feature to avoid simultaneous
sc. It is a mandatory requirement for multi-core LoongArch processors
to implement such features, only except those single-core and dual-core
processors (they also don't support multi-chip interconnection).

Feature bits are introduced in CPUCFG3, bit 3 and bit 4 [2].

[1] https://lore.kernel.org/loongarch/CAAhV-H6vvkuOzy8OemWdYK3taj5Jn3bFX0ZTwE=twM8ywpBUYA@mail.gmail.com/T/#t
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_cpucfgReported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>