Typed up all the items Rodrigo capture at the vkms workshop at
xdc2018:

https://etherpad.net/p/vkms_todo

v2: Review from Rodrigo.
- Add eBPF for atomic check, I forgot it.
- Improve spelling.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003132103.29309-1-daniel.vetter@ffwll.ch

Let's make the infoframe pack functions usable with a const infoframe
structure. This allows us to precompute the infoframe earlier, and still
pack it later when we're no longer allowed to modify the structure.
So now we end up with a _check()+_pack_only() or _pack() functions
depending on whether you want to precompute the infoframes or not.
The names aren't great but I was lazy and didn't want to change all the
drivers.

v2: Deal with exynos churn
    Actually export the new funcs
v3: Fix various documentation fails (Hans)

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921143332.28970-1-ville.syrjala@linux.intel.comAcked-by: Hans Verkuil <hans.verkuil@cisco.com>

Use the drm_display_mode_to_videomode function to calculate front/
back porches and sync length.

Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch

The result of drm_crtc_index() is unused. Remove the call and
the unused variable.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-1-stefan@agner.ch

The log functions don't modify the passed in infoframe so make it const.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-4-ville.syrjala@linux.intel.comAcked-by: Hans Verkuil <hans.verkuil@cisco.com>

To make sure the infoframe unpack functions don't end up examining
stack garbage or oopsing, let's pass in the size of the buffer.

v2: Convert tda1997x.c as well (kbuild test robot)

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-3-ville.syrjala@linux.intel.comAcked-by: Hans Verkuil <hans.verkuil@cisco.com>

The unpack functions just read from the passed in buffer,
so make it const.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-2-ville.syrjala@linux.intel.comAcked-by: Hans Verkuil <hans.verkuil@cisco.com>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

For drm_modes.c, the full node path is already printed out, so printing
just the node name a 2nd time is redundant and can be removed.

Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928225044.20132-1-robh@kernel.org

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

v2:
	* rebase onto fbdev rework
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.deSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926120650.25614-1-tzimmermann@suse.de

The rk3328 uses a dw-hdmi controller with an external hdmi phy from
Innosilicon which uses the generic phy framework for access.
Add the necessary data and the compatible for the rk3328 to the
rockchip dw-hdmi driver.

changes in v5:
- disable CEC_5V option to make CEC actually work (Jonas)
changes in v3:
- reword as suggested by Rob to show that it's a dw-hdmi + Inno phy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de

When using special phy handling operations we'll often need access to
the rockchip_hdmi struct.

As the chip-data that occupies the phy_data pointer initially gets
assigned to the rockchip_hdmi struct, we can now re-use this phy_data
pointer to hold the reference to the rockchip_hdmi struct and use this
reference later on.

Inspiration for this comes from meson and sunxi dw-hdmi, which are using
the same method.

changes in v3:
- reword commit message
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-6-heiko@sntech.de

Some variants of the dw-hdmi on Rockchip socs use a separate phy block
accessed via the generic phy framework, so allow them to be included
if such a phy reference is found.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-5-heiko@sntech.de

Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general
mmio, so allow these to be referenced via the regular phy interfaces
and therefore add optional phy-related properties to the binding.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-4-heiko@sntech.de

So far we always encountered socs with 2 output crtcs needing the driver
to tell the hdmi block which output to connect to. But there also exist
socs with only one crtc like the rk3228, rk3328 and rk3368.

So adapt the register field to simply carry a negative value to signal
that no output-switching is necessary.

changes in v3:
- fixed wording issue found by Robin Murphy
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de

In some IP implementations the reading of the phy-type may be broken.
One example are the Rockchip rk3228 and rk3328 socs that use a separate
vendor-type phy from Innosilicon but still report the HDMI20_TX type.

So allow the glue driver to force the vendor-phy for these cases.
In the future it may be necessary to allow forcing other types, but
for now we'll keep it simply to the case actually seen in the wild.

changes in v3:
- only allow forcing vendor type, as suggested by Laurent
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-2-heiko@sntech.de
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de

Hardware allow to read the position in scanout buffer so
we can use this information to make wait of vblank more accurate.

Active area bounds (start, end, total height) have already been
computed and written in ltdc registers, read them and get the
current line position to compute vpos value.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629130140.16004-1-benjamin.gaignard@linaro.org

This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel
is used with different LCDs (currently from 480x272 to 1280x800). A
small EEPROM chip is used for identification, which holds some factory
data and timing requirements.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com

Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the
simple-panel driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180924152610.25939-1-m.felsch@pengutronix.de

This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.

This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.

Depending on the variant, the PCB attached to the panel module either
supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
itself.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org

There is no need to check innolux->base.dev when trying to remove
the panel, as that variable is always set directly before the panel
gets added and will still be available on panel_remove.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816140920.5009-1-heiko@sntech.de

Add documentation for S043WQ26H-CT7 panel
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-6-giulio.benetti@micronovasrl.com

This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to
DRM simple panel driver.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-5-giulio.benetti@micronovasrl.com

Add documentation for S070WV95-CT16 panel
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-4-giulio.benetti@micronovasrl.com

This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM
simple panel driver.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-3-giulio.benetti@micronovasrl.com

This adds a vendor prefix "cdtech" for CDTech(H.K.) Electronics Limited

Website: www.cdtech-lcd.com
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-2-giulio.benetti@micronovasrl.com

There is a missing ">" character in Marco's email.

Fix it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532575167-14754-2-git-send-email-festevam@gmail.com

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532575167-14754-1-git-send-email-festevam@gmail.com

Panel timings were taken from vendor code and are not fully correct -
refresh rate is about 50Hz instead of 60Hz. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-9-a.hajda@samsung.com

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_win2 data struct may very well need to be updated
with some extra bios-dates in the future.

Reported-and-tested-by: russianneuromancer@ya.ru
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180909133457.10636-3-hdegoede@redhat.com

The variable is declared in an #ifdef section, but the user is
now unconditional, which leads to a build failure:

drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind':
drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'?

Remove the remaining #ifdef as well.

Fixes: f53705fd ("drm/imx: Use drm_fbdev_generic_setup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de

The hs_start interrupt on rk3188 fires at the start of a new frame, so
serves essentially the same purpose as the dsp_hold_valid irq in checking
when the last frame got delivered when going to standby. So define it
to fix a hang on atomic_disable of the vop because the completion never
really completed before.

Fixes: 428e15cc ("drm/rockchip: vop: add rk3188 vop definitions")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180923123730.14706-1-heiko@sntech.de

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180701132415.10161-1-contact@tzimmermann.org

R40 DE2 mixers are similar to those found in A83T, except it needs
different clock settings.

Add a compatibles for them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net

This reverts commit 3510e7a7.

During the 4.19 merge window for drm-misc, two patches critical to
supporting the display pipeline on the Allwinner R40 SoC were missed.
They were applied later but missed the merge window deadline. As a
result 4.19-rc1 kernel would crash on the R40 when it couldn't parse
the new device tree structure. We ended up removing support for the
R40 display pipeline for 4.19.

Since the missing patches are already merged for 4.20, we can now
revert the commit that removed support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921142743.8711-1-wens@csie.org

Backmerging 4.19-rc5 to pick up sun4i fix
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Sean Paul requested an -rc5 backmerge from some sun4i fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

- A crash fix founded in recent linux-next from John Garry
- One sparse warning fix from Souptick Joarder
- Some xxx_unref cleanup from Thomas Zimmermann
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAGd==04mXPMjVZ3=cM8r+DSQNM6zy7Anc4T2OsHjZgSsazBTPQ@mail.gmail.com

R-Car DU support for the D3 and E3 SoCs (v4.20)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3289904.RCOHkcp7u8@avalon

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926114312.23097-1-tzimmermann@suse.de