- 13 Jun, 2016 19 commits
-
-
NeilBrown authored
Every time a device is removed with ->hot_remove_disk() a synchronize_rcu() call is made which can delay several milliseconds in some case. If lots of devices fail at once - as could happen with a large RAID10 where one set of devices are removed all at once - these delays can add up to be very inconcenient. As failure is not reversible we can check for that first, setting a separate flag if it is found, and then all synchronize_rcu() once for all the flagged devices. Then ->hot_remove_disk() function can skip the synchronize_rcu() step if the flag is set. fix build error(Shaohua) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com>
-
NeilBrown authored
It is important that we never increment rdev->nr_pending on a Faulty device as ->hot_remove_disk() assumes that once the Faulty flag is visible no code will take a new reference. Some places take a new reference after only check In_sync. This should be safe as the two are changed together. However to make the code more obviously safe, add checks for 'Faulty' as well. Note: the actual rule is: Never increment nr_pending if Faulty is set and Blocked is clear, never clear Faulty, and never set Blocked without holding a reference through nr_pending. fix build error (Shaohua) Signed-off-by:
-
NeilBrown authored
Signed-off-by:
-
NeilBrown authored
Signed-off-by:
-
NeilBrown authored
Being in the middle of resync is no longer protection against failed rdevs disappearing. So add rcu protection. Signed-off-by:
-
NeilBrown authored
The rdev could be freed while handle_failed_sync is running, so rcu protection is needed. Signed-off-by:
-
NeilBrown authored
Since remove_and_add_spares() was added to hot_remove_disk() it has been possible for an rdev to be hot-removed while fix_read_error() was running, so we need to be more careful, and take a reference to the rdev while performing IO. Signed-off-by:
-
NeilBrown authored
'mirror' is only used to find 'rdev', several times. So just find 'rdev' once, and use it instead. Signed-off-by:
-
NeilBrown authored
Both functions use conf->mirrors[mirror].rdev several times, so improve readability by storing this in a local variable. Signed-off-by:
-
NeilBrown authored
'tmp' is only ever used to extract 'tmp->rdev', so just use 'rdev' directly. Signed-off-by:
-
NeilBrown authored
rdev already holds conf->mirrors[d].rdev, so no need to load it again. Signed-off-by:
-
NeilBrown authored
mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Reshape isn't always suitably careful as in the past rdev couldn't be removed during reshape. It can now, so add protection. Signed-off-by:
-
NeilBrown authored
mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held Previously they could not become NULL during a resync/recovery/reshape either. However when remove_and_add_spares() was added to hot_remove_disk(), that changed. So raid10_sync_request didn't previously need to protect rdev access, but now it does. Fix missed check(Shaohua) Signed-off-by:
-
NeilBrown authored
mirrors[].rdev can become NULL at any point unless: - a counted reference is held - ->reconfig_mutex is held, or - rcu_read_lock() is held raid10_status holds none of these. So add rcu_read_lock() protection. Signed-off-by:
-
NeilBrown authored
If you have a raid10 with a replacement device that is resyncing - e.g. after a crash before the replacement was complete - the write to the replacement will increment nr_pending on the wrong device, which will lead to strangeness. Signed-off-by:
-
NeilBrown authored
Re-checking the faulty flag here brings no value. The comment about "risk" refers to the risk that the device could be in the process of being removed by ->hot_remove_disk(). However providing that the ->nr_pending count is incremented inside an rcu_read_locked() region, there is no risk of that happening. This is because the rdev pointer (in the personalities array) is set to NULL before synchronize_rcu(), and ->nr_pending is tested afterwards. If the rcu_read_locked region happens before the synchronize_rcu(), the test will see that nr_pending has been incremented. If it happens afterwards, the rdev pointer will be NULL so there is nothing to increment. Signed-off-by:
-
NeilBrown authored
When the HOT_REMOVE_DISK ioctl is used to remove a device, we call remove_and_add_spares() which will remove it from the personality if possible. This improves the chances that the removal will succeed. When writing "remove" to dev-XX/state, we don't. So that can fail more easily. So add the remove_and_add_spares() into "remove" handling. Signed-off-by:
-
Tomasz Majchrzak authored
A performance drop of mkfs has been observed on RAID10 during resync since commit 09314799 ("md: remove 'go_faster' option from ->sync_request()"). Resync sends so many IOs it slows down non-resync IOs significantly (few times). Add a short delay to a resync. The previous long sleep (1s) has proven unnecessary, even very short delay brings performance right. The change also applied to raid1. The problem has not been observed on raid1, however it shares barriers code with raid10 so it might be an issue for some setup too. Suggested-by:
Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by:
-
Xiao Ni authored
This is a simple check before updating the superblock. It should update the superblock when update_size return 0. Signed-off-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
-
- 09 Jun, 2016 1 commit
-
-
Cong Wang authored
We saw a list corruption in the list all_detected_devices: WARNING: CPU: 16 PID: 226 at lib/list_debug.c:29 __list_add+0x3c/0xa9() list_add corruption. next->prev should be prev (ffff880859d58320), but was ffff880859ce74c0. (next=ffffffff81abfdb0). Modules linked in: ahci libahci libata sd_mod scsi_mod CPU: 16 PID: 226 Comm: kworker/u241:4 Not tainted 4.1.20 #1 Hardware name: Dell Inc. PowerEdge C6220/04GD66, BIOS 2.2.3 11/07/2013 Workqueue: events_unbound async_run_entry_fn 0000000000000000 ffff880859a5baf8 ffffffff81502872 ffff880859a5bb48 0000000000000009 ffff880859a5bb38 ffffffff810692a5 ffff880859ee8828 ffffffff812ad02c ffff880859d58320 ffffffff81abfdb0 ffff880859eb90c0 Call Trace: [<ffffffff81502872>] dump_stack+0x4d/0x63 [<ffffffff810692a5>] warn_slowpath_common+0xa1/0xbb [<ffffffff812ad02c>] ? __list_add+0x3c/0xa9 [<ffffffff81069305>] warn_slowpath_fmt+0x46/0x48 [<ffffffff812ad02c>] __list_add+0x3c/0xa9 [<ffffffff81406f28>] md_autodetect_dev+0x41/0x62 [<ffffffff81285862>] rescan_partitions+0x25f/0x29d [<ffffffff81506372>] ? mutex_lock+0x13/0x31 [<ffffffff811a090f>] __blkdev_get+0x1aa/0x3cd [<ffffffff811a0b91>] blkdev_get+0x5f/0x294 [<ffffffff81377ceb>] ? put_device+0x17/0x19 [<ffffffff8128227c>] ? disk_put_part+0x12/0x14 [<ffffffff812836f3>] add_disk+0x29d/0x407 [<ffffffff81384345>] ? __pm_runtime_use_autosuspend+0x5c/0x64 [<ffffffffa004a724>] sd_probe_async+0x115/0x1af [sd_mod] [<ffffffff81083177>] async_run_entry_fn+0x72/0x12c [<ffffffff8107c44c>] process_one_work+0x198/0x2ce [<ffffffff8107cac7>] worker_thread+0x1dd/0x2bb [<ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15 [<ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15 [<ffffffff81080d9c>] kthread+0xae/0xb6 [<ffffffff81080000>] ? param_array_set+0x40/0xfa [<ffffffff81080cee>] ? __kthread_parkme+0x61/0x61 [<ffffffff81508152>] ret_from_fork+0x42/0x70 [<ffffffff81080cee>] ? __kthread_parkme+0x61/0x61 I suspect it is because there is no lock protecting this global list, autostart_arrays() is called in ioctl() path where there is no lock. Cc: Shaohua Li <shli@kernel.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 03 Jun, 2016 2 commits
-
-
Guoqing Jiang authored
Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
-
Guoqing Jiang authored
Add a disk to an array which is performing recovery is a little complicated, we need to do both reap the sync thread and perform add disk for the case, then it caused deadlock as follows. linux44:~ # ps aux|grep md|grep D root 1822 0.0 0.0 0 0 ? D 16:50 0:00 [md127_resync] root 1848 0.0 0.0 19860 952 pts/0 D+ 16:50 0:00 mdadm --manage /dev/md127 --re-add /dev/vdb linux44:~ # cat /proc/1848/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa051ddb0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa0526e45>] md_reap_sync_thread+0x15/0x150 [md_mod] [<ffffffffa05271e0>] action_store+0x260/0x270 [md_mod] [<ffffffffa05206b4>] md_attr_store+0xb4/0x100 [md_mod] [<ffffffff81214a7e>] sysfs_write_file+0xbe/0x140 [<ffffffff811a6b98>] vfs_write+0xb8/0x1e0 [<ffffffff811a75b8>] SyS_write+0x48/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b [<00007f068ea1ed30>] 0x7f068ea1ed30 linux44:~ # cat /proc/1822/stack [<ffffffffa05251a6>] md_do_sync+0x846/0xf40 [md_mod] [<ffffffffa052402d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 Task1848 Task1822 md_attr_store (held reconfig_mutex by call mddev_lock()) action_store md_reap_sync_thread md_unregister_thread kthread_stop md_wakeup_thread(mddev->thread); wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_PENDING)) md_check_recovery is triggered by wakeup mddev->thread, but it can't clear MD_CHANGE_PENDING flag since it can't get lock which was held by md_attr_store already. To solve the deadlock problem, we move "->resync_finish()" from md_do_sync to md_reap_sync_thread (after md_update_sb), also MD_HELD_RESYNC_LOCK is introduced since it is possible that node can't get resync lock in md_do_sync. Then we do not need to wait for MD_CHANGE_PENDING is cleared or not since metadata should be updated after md_update_sb, so just call resync_finish if MD_HELD_RESYNC_LOCK is set. We also unified the code after skip label, since set PENDING for non-clustered case should be harmless. Reviewed-by:
-
- 26 May, 2016 4 commits
-
-
Song Liu authored
In current handle_stripe_dirtying, the code prefers rmw with PARITY_ENABLE_RMW; while prefers rcw with PARITY_PREFER_RMW. This patch reverses this behavior. Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: EFI, entry code, pkeys and MPX fixes, TASK_SIZE cleanups and a tsc frequency table fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Switch from TASK_SIZE to TASK_SIZE_MAX in the page fault code x86/fsgsbase/64: Use TASK_SIZE_MAX for FSBASE/GSBASE upper limits x86/mm/mpx: Work around MPX erratum SKD046 x86/entry/64: Fix stack return address retrieval in thunk x86/efi: Fix 7-parameter efi_call()s x86/cpufeature, x86/mm/pkeys: Fix broken compile-time disabling of pkeys x86/tsc: Add missing Cherrytrail frequency to the table
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: one for a lost wakeup, the other to fix the compiler optimizing out preempt operations on ARM64 (and possibly other non-x86 architectures)" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix remote wakeups sched/preempt: Fix preempt_count manipulations
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "Mostly tooling and PMU driver fixes, but also a number of late updates such as the reworking of the call-chain size limiting logic to make call-graph recording more robust, plus tooling side changes for the new 'backwards ring-buffer' extension to the perf ring-buffer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) perf record: Read from backward ring buffer perf record: Rename variable to make code clear perf record: Prevent reading invalid data in record__mmap_read perf evlist: Add API to pause/resume perf trace: Use the ptr->name beautifier as default for "filename" args perf trace: Use the fd->name beautifier as default for "fd" args perf report: Add srcline_from/to branch sort keys perf evsel: Record fd into perf_mmap perf evsel: Add overwrite attribute and check write_backward perf tools: Set buildid dir under symfs when --symfs is provided perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced perf annotate: Sort list of recognised instructions perf annotate: Fix identification of ARM blt and bls instructions perf tools: Fix usage of max_stack sysctl perf callchain: Stop validating callchains by the max_stack sysctl perf trace: Fix exit_group() formatting perf top: Use machine->kptr_restrict_warned perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1 perf machine: Do not bail out if not managing to read ref reloc symbol perf/x86/intel/p4: Trival indentation fix, remove space ...
-
- 25 May, 2016 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool build fix from Ingo Molnar: "An libtool fix for older libelf versions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Allow building with older libelf
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs iov_iter regression fix from Al Viro: "Fix for braino in 'fold checks into iterate_and_advance()'" * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: do "fold checks into iterate_and_advance()" right
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs xattr regression fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make xattr_resolve_handlers() safe to use with NULL ->s_xattr xattr: Fail with -EINVAL for NULL attribute names
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Additional ACPI update for v4.7-rc1 Just one fix for incorrect async_synchronize_cookie() usage in the ACPI battery driver (Chris Wilson)" * tag 'acpi-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Correctly serialise with the pending async probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: "These are two stable-candidate fixes (PM core, cpuidle) and a bunch of cpufreq cleanups. Specifics: - Stable-candidate cpuidle fix to make it check the right variable when deciding whether or not to enable interrupts on the local CPU so as to avoid enabling iterrupts too early in some cases if the system has both coupled and per-core idle states (Daniel Lezcano). - Stable-candidate PM core fix to make it handle failures at the "late suspend" stage of device suspend consistently for all devices regardless of whether or not async suspend/resume is enabled for them (Rafael Wysocki). - Cleanups in the cpufreq core, the schedutil governor and the intel_pstate driver (Rafael Wysocki, Pankaj Gupta, Viresh Kumar)" * tag 'pm-4.7-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / sleep: Handle failures in device_suspend_late() consistently cpufreq: schedutil: Improve prints messages with pr_fmt cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter() cpufreq: simplified goto out in cpufreq_register_driver() cpufreq: governor: CPUFREQ_GOV_STOP never fails cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails intel_pstate: Simplify conditional in intel_pstate_set_policy() -
Al Viro authored
the only case when we should skip the iterate_and_advance() guts is when nothing's left in the iterator, _not_ just when requested amount is 0. Said guts will do nothing in the latter case anyway; the problem we tried to deal with in the aforementioned commit is that when there's nothing left *and* the amount requested is 0, we might end up deferencing one iovec too many; the value we fetch from there is discarded in that case, but theoretically it might oops if the iovec array ends exactly at the end of page with the next page not mapped. Bailing out on zero size requested had an unexpected side effect - zero-length segment in the beginning of iovec array ended up throwing do_loop_readv_writev() into infinite spin; we do not advance past the empty segment at all. Reproducer is trivial: echo '#include <sys/uio.h>' >a.c echo 'main() {char c; struct iovec v[] = {{&c,0},{&c,1}}; readv(0,v,2);}' >>a.c cc a.c && ./a.out </proc/uptime which should end up with the process not hanging. Probably ought to go into LTP or xfstests... Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: -
Andreas Gruenbacher authored
Commit 98e9cb57 improved the xattr name checks in xattr_resolve_name but didn't update the NULL attribute name check appropriately, so NULL attribute names lead to NULL pointer dereferences. Turn that into -EINVAL results instead. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> fs/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by:
-
Rafael J. Wysocki authored
* acpi-battery: ACPI / battery: Correctly serialise with the pending async probe
-
Rafael J. Wysocki authored
* pm-cpufreq: cpufreq: schedutil: Improve prints messages with pr_fmt cpufreq: simplified goto out in cpufreq_register_driver() cpufreq: governor: CPUFREQ_GOV_STOP never fails cpufreq: governor: CPUFREQ_GOV_POLICY_EXIT never fails intel_pstate: Simplify conditional in intel_pstate_set_policy() * pm-cpuidle: cpuidle: Fix cpuidle_state_is_coupled() argument in cpuidle_enter() * pm-core: PM / sleep: Handle failures in device_suspend_late() consistently
-
Linus Torvalds authored
Merge tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes introduces an atomic API to the PWM subsystem. This is influenced by the DRM atomic API that was introduced a while back, though it is obviously a lot simpler. The fundamental idea remains the same, though: drivers provide a single callback to implement the atomic configuration of a PWM channel. As a side-effect the PWM subsystem gains the ability for initial state retrieval, so that the logical state mirrors that of the hardware. Many use-cases don't care about this, but for others it is essential. These new features require changes in all users, which these patches take care of. The core is transitioned to use the atomic callback if available and provides a fallback mechanism for other drivers. Changes to transition users and drivers to the atomic API are postponed to v4.8" * tag 'pwm/for-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits) pwm: Add information about polarity, duty cycle and period to debugfs pwm: Switch to the atomic API pwm: Update documentation pwm: Add core infrastructure to allow atomic updates pwm: Add hardware readout infrastructure pwm: Move the enabled/disabled info into pwm_state pwm: Introduce the pwm_state concept pwm: Keep PWM state in sync with hardware state ARM: Explicitly apply PWM config extracted from pwm_args drm: i915: Explicitly apply PWM config extracted from pwm_args input: misc: pwm-beeper: Explicitly apply PWM config extracted from pwm_args input: misc: max8997: Explicitly apply PWM config extracted from pwm_args backlight: lm3630a: explicitly apply PWM config extracted from pwm_args backlight: lp855x: Explicitly apply PWM config extracted from pwm_args backlight: lp8788: Explicitly apply PWM config extracted from pwm_args backlight: pwm_bl: Use pwm_get_args() where appropriate fbdev: ssd1307fb: Use pwm_get_args() where appropriate regulator: pwm: Use pwm_get_args() where appropriate leds: pwm: Use pwm_get_args() where appropriate input: misc: max77693: Use pwm_get_args() where appropriate ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - add support for Fintek F81865 Super-IO chip - add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based SoCs from Renesas - octeon: Handle the FROZEN hot plug notifier actions - f71808e_wdt fixes and cleanups - some small improvements in code and documentation * git://www.linux-watchdog.org/linux-watchdog: MAINTAINERS: Add file patterns for watchdog device tree bindings Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry watchdog: shwdt: Use setup_timer() watchdog: cpwd: Use setup_timer() arm64: defconfig: enable Renesas Watchdog Timer watchdog: renesas-wdt: add driver watchdog: remove error message when unable to allocate watchdog device watchdog: f71808e_wdt: Fix WDTMOUT_STS register read watchdog: f71808e_wdt: Fix typo watchdog: f71808e_wdt: Add F81865 support watchdog: sp5100_tco: properly check for new register layouts watchdog: core: Fix circular locking dependency watchdog: core: fix trivial typo in a comment watchdog: hpwdt: Adjust documentation to match latest kernel module parameters. watchdog: imx2_wdt: add external reset support via dt prop watchdog: octeon: Handle the FROZEN hot plug notifier actions. watchdog: qcom: Report reboot reason
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO updates from Alex Williamson: - Hide INTx on certain known broken devices (Alex Williamson) - Additional backdoor reset detection (Alex Williamson) - Remove unused iommudata reference (Alexey Kardashevskiy) - Use cfg_size to avoid probing extended config space (Alexey Kardashevskiy) * tag 'vfio-v4.7-rc1' of git://github.com/awilliam/linux-vfio: vfio_pci: Test for extended capabilities if config space > 256 bytes vfio_iommu_spapr_tce: Remove unneeded iommu_group_get_iommudata vfio/pci: Add test for BAR restore vfio/pci: Hide broken INTx support from user
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull header warning fix from Dave Airlie: "Here is the C++ guards warning fix from Arnd" [ Background: there are 'extern "C" { }' guards in include/uapi for the GPU headers. They should arguably be wrapped somehow, but as it is they caused checkpatch to warn because it would trigger on the 'extern' and think it's exporting a function or variable from the kernel to user space. This just fixes checkpatch. Whether we wrap the C++ guards some way in the future will be an independent issue. ] * tag 'drm-4.7-rc1-headers-fix' of git://people.freedesktop.org/~airlied/linux: headers_check: don't warn about c++ guards
-
