- 11 Jul, 2019 2 commits
-
-
Sean Christopherson authored
On VMX, KVM currently does not re-enable irqs until after it has exited the guest context. As a result, a tick that fires in the window between VM-Exit and guest_exit_irqoff() will be accounted as system time. While said window is relatively small, it's large enough to be problematic in some configurations, e.g. if VM-Exits are consistently occurring a hair earlier than the tick irq. Intentionally toggle irqs back off so that guest_exit_irqoff() can be used in lieu of guest_exit() in order to avoid the save/restore of flags in guest_exit(). On my Haswell system, "nop; cli; sti" is ~6 cycles, versus ~28 cycles for "pushf; pop <reg>; cli; push <reg>; popf". Fixes: f2485b3e ("KVM: x86: use guest_exit_irqoff") Reported-by:
Wei Yang <w90p710@gmail.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
Some events can provide a guest with information about other guests or the host (e.g. L3 cache stats); providing the capability to restrict access to a "safe" set of events would limit the potential for the PMU to be used in any side channel attacks. This change introduces a new VM ioctl that sets an event filter. If the guest attempts to program a counter for any blacklisted or non-whitelisted event, the kernel counter won't be created, so any RDPMC/RDMSR will show 0 instances of that event. Signed-off-by:
Eric Hankland <ehankland@google.com> [Lots of changes. All remaining bugs are probably mine. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 10 Jul, 2019 2 commits
-
-
Yi Wang authored
We get a warning when build kernel W=1: arch/x86/kvm/../../../virt/kvm/eventfd.c:48:1: warning: no previous prototype for ‘kvm_arch_irqfd_allowed’ [-Wmissing-prototypes] kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args) ^ The reason is kvm_arch_irqfd_allowed() is declared in arch/x86/kvm/irq.h, which is not included by eventfd.c. Considering kvm_arch_irqfd_allowed() is a weakly defined function in eventfd.c, remove the declaration to kvm_host.h can fix this. Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
KarimAllah Ahmed authored
The field "page" is initialized to KVM_UNMAPPED_PAGE when it is not used (i.e. when the memory lives outside kernel control). So this check will always end up using kunmap even for memremap regions. Fixes: e45adf66 ("KVM: Introduce a new guest mapping API") Cc: stable@vger.kernel.org Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 05 Jul, 2019 15 commits
-
-
Wanpeng Li authored
Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane which can happen sporadically in product environment. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Replace a magic 64-bit mask with a list of valid registers, computing the same mask in the end. Suggested-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
kvm-unit-tests were adjusted to match bare metal behavior, but KVM itself was not doing what bare metal does; fix that. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Krish Sadhukhan authored
According to section "Checks on Host Segment and Descriptor-Table Registers" in Intel SDM vol 3C, the following checks are performed on vmentry of nested guests: - In the selector field for each of CS, SS, DS, ES, FS, GS and TR, the RPL (bits 1:0) and the TI flag (bit 2) must be 0. - The selector fields for CS and TR cannot be 0000H. - The selector field for SS cannot be 0000H if the "host address-space size" VM-exit control is 0. - On processors that support Intel 64 architecture, the base-address fields for FS, GS and TR must contain canonical addresses. Signed-off-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by:
Karl Heubaum <karl.heubaum@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
KVM does not have 100% coverage of VMX consistency checks, i.e. some checks that cause VM-Fail may only be detected by hardware during a nested VM-Entry. In such a case, KVM must restore L1's state to the pre-VM-Enter state as L2's state has already been loaded into KVM's software model. L1's CR3 and PDPTRs in particular are loaded from vmcs01.GUEST_*. But when EPT is disabled, the associated fields hold KVM's shadow values, not L1's "real" values. Fortunately, when EPT is disabled the PDPTRs come from memory, i.e. are not cached in the VMCS. Which leaves CR3 as the sole anomaly. A previously applied workaround to handle CR3 was to force nested early checks if EPT is disabled: commit 2b27924b ("KVM: nVMX: always use early vmcs check when EPT is disabled") Forcing nested early checks is undesirable as doing so adds hundreds of cycles to every nested VM-Entry. Rather than take this performance hit, handle CR3 by overwriting vmcs01.GUEST_CR3 with L1's CR3 during nested VM-Entry when EPT is disabled *and* nested early checks are disabled. By stuffing vmcs01.GUEST_CR3, nested_vmx_restore_host_state() will naturally restore the correct vcpu->arch.cr3 from vmcs01.GUEST_CR3. These shenanigans work because nested_vmx_restore_host_state() does a full kvm_mmu_reset_context(), i.e. unloads the current MMU, which guarantees vmcs01.GUEST_CR3 will be rewritten with a new shadow CR3 prior to re-entering L1. vcpu->arch.root_mmu.root_hpa is set to INVALID_PAGE via: nested_vmx_restore_host_state() -> kvm_mmu_reset_context() -> kvm_mmu_unload() -> kvm_mmu_free_roots() kvm_mmu_unload() has WARN_ON(root_hpa != INVALID_PAGE), i.e. we can bank on 'root_hpa == INVALID_PAGE' unless the implementation of kvm_mmu_reset_context() is changed. On the way into L1, VMCS.GUEST_CR3 is guaranteed to be written (on a successful entry) via: vcpu_enter_guest() -> kvm_mmu_reload() -> kvm_mmu_load() -> kvm_mmu_load_cr3() -> vmx_set_cr3() Stuff vmcs01.GUEST_CR3 if and only if nested early checks are disabled as a "late" VM-Fail should never happen win that case (KVM WARNs), and the conditional write avoids the need to restore the correct GUEST_CR3 when nested_vmx_check_vmentry_hw() fails. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20190607185534.24368-1-sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
These are useful in debugging shadow paging. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Note that in such a case it is quite likely that KVM will BUG_ON in __pte_list_remove when the VM is closed. However, there is no immediate risk of memory corruption in the host so a WARN_ON is enough and it lets you gather traces for debugging. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
After the previous patch, the low bits of the gfn are masked in both FNAME(fetch) and __direct_map, so we do not need to clear them in transparent_hugepage_adjust. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
These two functions are basically doing the same thing through kvm_mmu_get_page, link_shadow_page and mmu_set_spte; yet, for historical reasons, their code looks very different. This patch tries to take the best of each and make them very similar, so that it is easy to understand changes that apply to both of them. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Junaid Shahid authored
Release the page at the call-site where it was originally acquired. This makes the exit code cleaner for most call sites, since they do not need to duplicate code between success and the failure label. Signed-off-by:
Junaid Shahid <junaids@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The has_leaf_count member was originally added for KVM's paravirtualization CPUID leaves. However, since then the leaf count _has_ been added to those leaves as well, so we can drop that special case. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
do_cpuid_1_ent does not do the entire processing for a CPUID entry, it only retrieves the host's values. Rename it to match reality. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
do_cpuid_1_ent is typically called in two places by __do_cpuid_func for CPUID functions that have subleafs. Both places have to set the KVM_CPUID_FLAG_SIGNIFCANT_INDEX. Set that flag, and KVM_CPUID_FLAG_STATEFUL_FUNC as well, directly in do_cpuid_1_ent. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
CPUID function 7 has multiple subleafs. Instead of having nested switch statements, move the logic to filter supported features to a separate function, and call it for each subleaf. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Rename it as well as __do_cpuid_ent and __do_cpuid_ent_emulated to have "func" in its name, and drop the index parameter which is always 0. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 03 Jul, 2019 2 commits
-
-
Wanpeng Li authored
The trailing newlines will lead to extra newlines in the trace file which looks like the following output, so remove it. qemu-system-x86-15695 [002] ...1 15774.839240: kvm_hv_timer_state: vcpu_id 0 hv_timer 1 qemu-system-x86-15695 [002] ...1 15774.839309: kvm_hv_timer_state: vcpu_id 0 hv_timer 1 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Allow testing code for old processors that lack the next RIP save feature, by disabling usage of the next_rip field. Nested hypervisors however get the feature unconditionally. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 02 Jul, 2019 11 commits
-
-
Jim Mattson authored
This bit is purely advisory. Passing it through to the guest indicates that the virtual processor, like the physical processor, prefers that STIBP is only set once during boot and not changed. Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
When L0 is executing handle_invept(), the TDP MMU is active. Emulating an L1 INVEPT does require synchronizing the appropriate shadow EPT root(s), but a call to kvm_mmu_sync_roots in this context won't do that. Similarly, the hardware TLB and paging-structure-cache entries associated with the appropriate shadow EPT root(s) must be flushed, but requesting a TLB_FLUSH from this context won't do that either. How did this ever work? KVM always does a sync_roots and TLB flush (in the correct context) when transitioning from L1 to L2. That isn't the best choice for nested VM performance, but it effectively papers over the mistakes here. Remove the unnecessary operations and leave a comment to try to do better in the future. Reported-by:
Junaid Shahid <junaids@google.com> Fixes: bfd0a56b ("nEPT: Nested INVEPT") Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Nadav Har'El <nyh@il.ibm.com> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: Xinhao Xu <xinhao.xu@intel.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by Peter Shier <pshier@google.com> Reviewed-by:
Junaid Shahid <junaids@google.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Expose PV_SCHED_YIELD feature bit to guest, the guest can check this feature bit before using paravirtualized sched yield. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
The target vCPUs are in runnable state after vcpu_kick and suitable as a yield target. This patch implements the sched yield hypercall. 17% performance increasement of ebizzy benchmark can be observed in an over-subscribe environment. (w/ kvm-pv-tlb disabled, testing TLB flush call-function IPI-many since call-function is not easy to be trigged by userspace workload). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
When sending a call-function IPI-many to vCPUs, yield if any of the IPI target vCPUs was preempted, we just select the first preempted target vCPU which we found since the state of target vCPUs can change underneath and to avoid race conditions. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
When Enlightened VMCS is in use, it is valid to do VMCLEAR and, according to TLFS, this should "transition an enlightened VMCS from the active to the non-active state". It is, however, wrong to assume that it is only valid to do VMCLEAR for the eVMCS which is currently active on the vCPU performing VMCLEAR. Currently, the logic in handle_vmclear() is broken: in case, there is no active eVMCS on the vCPU doing VMCLEAR we treat the argument as a 'normal' VMCS and kvm_vcpu_write_guest() to the 'launch_state' field irreversibly corrupts the memory area. So, in case the VMCLEAR argument is not the current active eVMCS on the vCPU, how can we know if the area it is pointing to is a normal or an enlightened VMCS? Thanks to the bug in Hyper-V (see commit 72aeb60c ("KVM: nVMX: Verify eVMCS revision id match supported eVMCS version on eVMCS VMPTRLD")) we can not, the revision can't be used to distinguish between them. So let's assume it is always enlightened in case enlightened vmentry is enabled in the assist page. Also, check if vmx->nested.enlightened_vmcs_enabled to minimize the impact for 'unenlightened' workloads. Fixes: b8bbab92 ("KVM: nVMX: implement enlightened VMPTRLD and VMCLEAR") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
Apparently, Windows doesn't maintain clean fields data after it does VMCLEAR for an enlightened VMCS so we can only use it on VMRESUME. The issue went unnoticed because currently we do nested_release_evmcs() in handle_vmclear() and the consecutive enlightened VMPTRLD invalidates clean fields when a new eVMCS is mapped but we're going to change the logic. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
This allows userspace to know which MSRs are supported by the hypervisor. Unfortunately userspace must resort to tricks for everything except MSR_IA32_VMX_VMFUNC (which was just added in the previous patch). One possibility is to use the feature control MSR, which is tied to nested VMX as well and is present on all KVM versions that support feature MSRs. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Allow userspace to set a custom value for the VMFUNC controls MSR, as long as the capabilities it advertises do not exceed those of the host. Fixes: 27c42a1b ("KVM: nVMX: Enable VMFUNC for the L1 hypervisor", 2017-08-03) Reviewed-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Some secondary controls are automatically enabled/disabled based on the CPUID values that are set for the guest. However, they are still available at a global level and therefore should be present when KVM_GET_MSRS is sent to /dev/kvm. Fixes: 1389309c ("KVM: nVMX: expose VMX capabilities for nested hypervisors to userspace", 2018-02-26) Reviewed-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 20 Jun, 2019 2 commits
-
-
Saar Amar authored
The function kvm_create_lapic() attempts to allocate the apic structure and sets a pointer to it in the virtual processor structure. However, if get_zeroed_page() failed, the function frees the apic chunk, but forgets to set the pointer in the vcpu to NULL. It's not a security issue since there isn't a use of that pointer if kvm_create_lapic() returns error, but it's more accurate that way. Signed-off-by:
Saar Amar <saaramar@microsoft.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Raise #GP when guest read/write IA32_XSS, but the CPUID bits say that it shouldn't exist. Fixes: 20300099 (kvm: vmx: add MSR logic for XSAVES) Reported-by:
Xiaoyao Li <xiaoyao.li@linux.intel.com> Reported-by:
Tao Xu <tao3.xu@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 18 Jun, 2019 6 commits
-
-
Paolo Bonzini authored
The VMX_PREEMPTION_TIMER flag may be toggled frequently, though not *very* frequently. Since it does not affect KVM's dirty logic, e.g. the preemption timer value is loaded from vmcs12 even if vmcs12 is "clean", there is no need to mark vmcs12 dirty when L1 writes pin controls, and shadowing the field achieves that. Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
VMWRITEs to the major VMCS controls, pin controls included, are deceptively expensive. CPUs with VMCS caching (Westmere and later) also optimize away consistency checks on VM-Entry, i.e. skip consistency checks if the relevant fields have not changed since the last successful VM-Entry (of the cached VMCS). Because uops are a precious commodity, uCode's dirty VMCS field tracking isn't as precise as software would prefer. Notably, writing any of the major VMCS fields effectively marks the entire VMCS dirty, i.e. causes the next VM-Entry to perform all consistency checks, which consumes several hundred cycles. As it pertains to KVM, toggling PIN_BASED_VMX_PREEMPTION_TIMER more than doubles the latency of the next VM-Entry (and again when/if the flag is toggled back). In a non-nested scenario, running a "standard" guest with the preemption timer enabled, toggling the timer flag is uncommon but not rare, e.g. roughly 1 in 10 entries. Disabling the preemption timer can change these numbers due to its use for "immediate exits", even when explicitly disabled by userspace. Nested virtualization in particular is painful, as the timer flag is set for the majority of VM-Enters, but prepare_vmcs02() initializes vmcs02's pin controls to *clear* the flag since its the timer's final state isn't known until vmx_vcpu_run(). I.e. the majority of nested VM-Enters end up unnecessarily writing pin controls *twice*. Rather than toggle the timer flag in pin controls, set the timer value itself to the largest allowed value to put it into a "soft disabled" state, and ignore any spurious preemption timer exits. Sadly, the timer is a 32-bit value and so theoretically it can fire before the head death of the universe, i.e. spurious exits are possible. But because KVM does *not* save the timer value on VM-Exit and because the timer runs at a slower rate than the TSC, the maximuma timer value is still sufficiently large for KVM's purposes. E.g. on a modern CPU with a timer that runs at 1/32 the frequency of a 2.4ghz constant-rate TSC, the timer will fire after ~55 seconds of *uninterrupted* guest execution. In other words, spurious VM-Exits are effectively only possible if the host is completely tickless on the logical CPU, the guest is not using the preemption timer, and the guest is not generating VM-Exits for any other reason. To be safe from bad/weird hardware, disable the preemption timer if its maximum delay is less than ten seconds. Ten seconds is mostly arbitrary and was selected in no small part because it's a nice round number. For simplicity and paranoia, fall back to __kvm_request_immediate_exit() if the preemption timer is disabled by KVM or userspace. Previously KVM continued to use the preemption timer to force immediate exits even when the timer was disabled by userspace. Now that KVM leaves the timer running instead of truly disabling it, allow userspace to kill it entirely in the unlikely event the timer (or KVM) malfunctions. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
... now that it is fully redundant with the pin controls shadow. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
KVM dynamically toggles SECONDARY_EXEC_DESC to intercept (a subset of) instructions that are subject to User-Mode Instruction Prevention, i.e. VMCS.SECONDARY_EXEC_DESC == CR4.UMIP when emulating UMIP. Preset the VMCS control when preparing vmcs02 to avoid unnecessarily VMWRITEs, e.g. KVM will clear VMCS.SECONDARY_EXEC_DESC in prepare_vmcs02_early() and then set it in vmx_set_cr4(). Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
KVM dynamically toggles the CPU_BASED_USE_MSR_BITMAPS execution control for nested guests based on whether or not both L0 and L1 want to pass through the same MSRs to L2. Preserve the last used value from vmcs02 so as to avoid multiple VMWRITEs to (re)set/(re)clear the bit on nested VM-Entry. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Or: Don't re-initialize vmcs02's controls on every nested VM-Entry. VMWRITEs to the major VMCS controls are deceptively expensive. Intel CPUs with VMCS caching (Westmere and later) also optimize away consistency checks on VM-Entry, i.e. skip consistency checks if the relevant fields have not changed since the last successful VM-Entry (of the cached VMCS). Because uops are a precious commodity, uCode's dirty VMCS field tracking isn't as precise as software would prefer. Notably, writing any of the major VMCS fields effectively marks the entire VMCS dirty, i.e. causes the next VM-Entry to perform all consistency checks, which consumes several hundred cycles. Zero out the controls' shadow copies during VMCS allocation and use the optimized setter when "initializing" controls. While this technically affects both non-nested and nested virtualization, nested virtualization is the primary beneficiary as avoid VMWRITEs when prepare vmcs02 allows hardware to optimizie away consistency checks. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-