- 02 Apr, 2011 4 commits
-
-
Michał Mirosław authored
Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
Not tested in any way. The original code for offload setting seems broken as it resets the features on every netback reconnect. This will set GSO_ROBUST at device creation time (earlier than connect time). RX checksum offload is forced on - so advertise as it is. Signed-off-by:
-
Michał Mirosław authored
There's a race (not fixed here) in smsc75xx in setting RFE_CTL that's not properly handled via rfe_ctl_lock. Spinlock is not a good tool here, as this has to wait for URB completion (or maybe just submission) after issuing register write request. Otherwise, the rfe_ctl might be changed just after spin_unlock() and device left programmed with other value. smsc95xx has increased hard_header_len for the case of TX checksumming. smsc75xx is fixed to advertise IP+IPV6_CSUM instead of HW_CSUM as it does not use csum_start/csum_offset. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
- 01 Apr, 2011 4 commits
-
-
David S. Miller authored
For consistency. Signed-off-by: -
Dmitry Kravkov authored
With current bnx2x firmware 6.2.9, iSCSI is not supported in DCB network, so we need to disable it. Add cnic command to disconnect iSCSI connections and prevent future connections when DCBX negotiation succeeds. Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Dmitry Kravkov authored
We could get hardware attention during DCB/FCoE traffic without this fix. Signed-off-by:
-
Dmitry Kravkov authored
To fix bugs when running offloaded FCoE/iSCSI traffic in multiple Class of Service environments. In some scenarios, traffic could stop on certain rings and eventually all traffic would stop. Signed-off-by:
-
- 31 Mar, 2011 28 commits
-
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
On-stack initialization via assignment of flow structures are expensive because GCC emits a memset() to clear the entire structure out no matter what. Add a helper for ipv4 output flow key setup which we can use to avoid the memset. Signed-off-by: -
Eric Dumazet authored
Add __rcu annotations and lockdep checks. Add const qualifiers node_parent() and node_parent_rcu() can use rcu_dereference_index_check() Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
The IRQF_SAMPLE_RANDOM flag is marked as deprecated and will be removed. Every input point to the kernel's entropy pool have to better document the type of entropy source it is. drivers/char/random.c now implements a set of interfaces that can be used for devices to collect enviromental noise. IRQF_SAMPLE_RANDOM will be replaced with these add_*_randomness exported functions. Network drivers are not a good source of entropy. They use as a source of entropy essentially a remote host. Which means that the source of entropy can be potentially controlled by an attacker. Also, with heavy workloads the entropy decreases due to less hardware interrupts happening thanks to irq mitigation and NAPI. If a system relies in its network interface as a entropy source it has a false sense of security. Systems that don't have devices whose drivers are good sources of entropy, should either use a hardware random number generator or feed the kernel's entropy pool from userspace using other sources of entropy such as EGD, video_entropyd, timer_entropyd and audio-entropyd. Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by:
-
Roopa Prabhu authored
Current enic code only supports ASSOCIATE and DISASSOCIATE port profile operations. This patch adds enic support for port profile PORT_REQUEST_PREASSOCIATE_RR operation. The VIC adapter (8021qbh) is capable of handling port profile requests done in two steps namely PREASSOCIATE_RR and ASSOCIATE today. The motivation to support PREASSOCIATE_RR comes mainly from its use as an optimization during VM migration ie, to do resource reservation on destination host before resources on source host are released. PREASSOCIATE_RR is a VDP operation and according to the latest at IEEE, 8021qbh will also need to support VDP commands. In addition to handling the new PORT_REQUEST_PREASSOCIATE_RR operation this patch also does the below: - Introduces handlers for PORT_REQUEST operations - Moves most of the port profile handling code to new files enic_pp.[ch] - Uses new fw devcmds for port profile operations Signed-off-by:
Roopa Prabhu <roprabhu@cisco.com> Signed-off-by:
David Wang <dwang2@cisco.com> Signed-off-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Roopa Prabhu authored
This patch does the following: - Introduces a new macro VIC_PROVINFO_ADD_TLV - Adds a new OS type in vic_generic_prov_os_type - Changes some vic_provinfo* helper routine args to constants Signed-off-by:
-
Roopa Prabhu authored
This patch adds wrapper routines to new port profile related fw devcmds and removes the old ones Signed-off-by:
-
Roopa Prabhu authored
This patch introduces new fw devcmds for port profile handling. These new commands are similar to the current fw commands for port profile handling. The only difference being that the new commands split the existing port profile handling devcmds into multiple fw commands, giving the driver finer control over port profile operations. Signed-off-by:
-
Harvey Harrison authored
Noticed by sparse: drivers/net/via-rhine.c:1706:16: warning: cast to restricted __be16 Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Joe Perches authored
Use the more common/verbose logging styles. Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove smsc911x prefixes from format strings. Rename SMSC_WARNING to SMSC_WARN. Remove DPRINTK macro. Use netif_<level> in SMSC_<level> macros. Convert NETIF_MSG_<foo> uses to lower case. Add no_printk verification in non-debug uses. Add pdata to SMSC_<level> uses to avoid hidden variable uses. Convert printks to netdev_<level> as appropriate. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Sathya Perla authored
As the be_worker() workqueue is scheduled in be_probe() it must be canceled unconditionally in be_shutdown(). Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
-
Sathya Perla authored
The code has been refactored to not set num_rx_qs inside be_enable_msix(). num_rx_qs is now set at the time of queue creation based on the number of available msix vectors. Signed-off-by:
-
Somnath Kotur authored
Signed-off-by:
Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by:
-
hayeswang authored
Support RTL8168E/RTL8111E. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
Add a new chip for RTL8168DP. Signed-off-by:
-
hayeswang authored
Add a new chip for RTL8105 whose settings are the same with RTL_GIGA_MAC_VER_30. Signed-off-by:
-
David S. Miller authored
-
David S. Miller authored
Like DCCP and other similar pieces of code, there are mechanisms here to try allocating smaller hash tables if the allocation fails. So pass in __GFP_NOWARN like the others do instead of emitting a scary message. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Patrick McHardy authored
Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms) and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms) removed some members from struct netlink_skb_parms that depend on the current context, all netlink users are now required to do synchronous message processing. connector however queues received messages and processes them in a work queue, which is not valid anymore. This patch converts connector to do synchronous message processing by invoking the registered callback handler directly from the netlink receive function. In order to avoid invoking the callback with connector locks held, a reference count is added to struct cn_callback_entry, the reference is taken when finding a matching callback entry on the device's queue_list and released after the callback handler has been invoked. Signed-off-by:
Patrick McHardy <kaber@trash.net> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
- 30 Mar, 2011 4 commits
-
-
Eric Dumazet authored
Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by RTNL being not locked before a call to fib_table_flush() Reported-by:
Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by:
-
Philip A. Prindeville authored
Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by:
Philip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by:
-
Philip A. Prindeville authored
Omit pkt_hdr preamble when dumping transmitted packet as hex-dump; we can pull this up because the frame has already been sent, and dumping it is the last thing we do with it before freeing it. Also include the size, vpi, and vci in the debug as is done on receive. Use "port" consistently instead of "device" intermittently. Signed-off-by:
-
Philip A. Prindeville authored
Use VPI.VCI notation consistently throughout the module. This is the one remaining place where the VCI is used before the VPI in any output. Signed-off-by:
-
