- 09 Aug, 2020 30 commits
-
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 5f90786b ] The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 1ca0fafd ] This essentially reverts commit 72123032 ("tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets") Mathieu reported that many vendors BGP implementations can actually switch TCP MD5 on established flows. Quoting Mathieu : Here is a list of a few network vendors along with their behavior with respect to TCP MD5: - Cisco: Allows for password to be changed, but within the hold-down timer (~180 seconds). - Juniper: When password is initially set on active connection it will reset, but after that any subsequent password changes no network resets. - Nokia: No notes on if they flap the tcp connection or not. - Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until both sides are ok with new passwords. - Meta-Switch: Expects the password to be set before a connection is attempted, but no further info on whether they reset the TCP connection on a change. - Avaya: Disable the neighbor, then set password, then re-enable. - Zebos: Would normally allow the change when socket connected. We can revert my prior change because commit 9424e2e7 ("tcp: md5: fix potential overestimation of TCP option space") removed the leak of 4 kernel bytes to the wire that was the main reason for my patch. While doing my investigations, I found a bug when a MD5 key is changed, leading to these commits that stable teams want to consider before backporting this revert : Commit 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Commit e6ced831 ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers") Fixes: 72123032 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets" Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit e6ced831 ] My prior fix went a bit too far, according to Herbert and Mathieu. Since we accept that concurrent TCP MD5 lookups might see inconsistent keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb() Clearing all key->key[] is needed to avoid possible KMSAN reports, if key->keylen is increased. Since tcp_md5_do_add() is not fast path, using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler. data_race() was added in linux-5.8 and will prevent KCSAN reports, this can safely be removed in stable backports, if data_race() is not yet backported. v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add() Fixes: 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 6a2febec ] MD5 keys are read with RCU protection, and tcp_md5_do_add() might update in-place a prior key. Normally, typical RCU updates would allocate a new piece of memory. In this case only key->key and key->keylen might be updated, and we do not care if an incoming packet could see the old key, the new one, or some intermediate value, since changing the key on a live flow is known to be problematic anyway. We only want to make sure that in the case key->keylen is changed, cpus in tcp_md5_hash_key() wont try to use uninitialized data, or crash because key->keylen was read twice to feed sg_init_one() and ahash_request_set_crypt() Fixes: 9ea88a15 ("tcp: md5: check md5 signature without socket lock") Signed-off-by:
-
Christoph Paasch authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit ce69e563 ] syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free: [ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Wei Wang fixed a part of these CDG-malloc issues with commit c1201444 ("tcp: memset ca_priv data to 0 properly"). This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards. (The issue can be reproduced at least down to v4.4.x.) Cc: Wei Wang <weiwan@google.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2b0a8c9e ("tcp: add CDG congestion control") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Sean Tranchetti authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 1e82a62f ] A potential deadlock can occur during registering or unregistering a new generic netlink family between the main nl_table_lock and the cb_lock where each thread wants the lock held by the other, as demonstrated below. 1) Thread 1 is performing a netlink_bind() operation on a socket. As part of this call, it will call netlink_lock_table(), incrementing the nl_table_users count to 1. 2) Thread 2 is registering (or unregistering) a genl_family via the genl_(un)register_family() API. The cb_lock semaphore will be taken for writing. 3) Thread 1 will call genl_bind() as part of the bind operation to handle subscribing to GENL multicast groups at the request of the user. It will attempt to take the cb_lock semaphore for reading, but it will fail and be scheduled away, waiting for Thread 2 to finish the write. 4) Thread 2 will call netlink_table_grab() during the (un)registration call. However, as Thread 1 has incremented nl_table_users, it will not be able to proceed, and both threads will be stuck waiting for the other. genl_bind() is a noop, unless a genl_family implements the mcast_bind() function to handle setting up family-specific multicast operations. Since no one in-tree uses this functionality as Cong pointed out, simply removing the genl_bind() function will remove the possibility for deadlock, as there is no attempt by Thread 1 above to take the cb_lock semaphore. Fixes: c380d9a7 ("genetlink: pass multicast bind/unbind to families") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Johannes Berg <johannes.berg@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Martin Varghese authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 394de110 ] The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23c ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit a9b11101 ] syzbot was to trigger a bug by tricking AF_LLC with non sensible addr->sllc_arphrd It seems clear LLC requires an Ethernet device. Back in commit abf9d537 ("llc: add support for SO_BINDTODEVICE") Octavian Purdila added possibility for application to use a zero value for sllc_arphrd, convert it to ARPHRD_ETHER to not cause regressions on existing applications. BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:199 [inline] BUG: KASAN: use-after-free in list_empty include/linux/list.h:268 [inline] BUG: KASAN: use-after-free in waitqueue_active include/linux/wait.h:126 [inline] BUG: KASAN: use-after-free in wq_has_sleeper include/linux/wait.h:160 [inline] BUG: KASAN: use-after-free in skwq_has_sleeper include/net/sock.h:2092 [inline] BUG: KASAN: use-after-free in sock_def_write_space+0x642/0x670 net/core/sock.c:2813 Read of size 8 at addr ffff88801e0b4078 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 __read_once_size include/linux/compiler.h:199 [inline] list_empty include/linux/list.h:268 [inline] waitqueue_active include/linux/wait.h:126 [inline] wq_has_sleeper include/linux/wait.h:160 [inline] skwq_has_sleeper include/net/sock.h:2092 [inline] sock_def_write_space+0x642/0x670 net/core/sock.c:2813 sock_wfree+0x1e1/0x260 net/core/sock.c:1958 skb_release_head_state+0xeb/0x260 net/core/skbuff.c:652 skb_release_all+0x16/0x60 net/core/skbuff.c:663 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xfb/0x410 net/core/skbuff.c:832 __dev_kfree_skb_any+0xa4/0xd0 net/core/dev.c:2967 dev_kfree_skb_any include/linux/netdevice.h:3650 [inline] e1000_unmap_and_free_tx_resource.isra.0+0x21b/0x3a0 drivers/net/ethernet/intel/e1000/e1000_main.c:1963 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3854 [inline] e1000_clean+0x4cc/0x1d10 drivers/net/ethernet/intel/e1000/e1000_main.c:3796 napi_poll net/core/dev.c:6532 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6600 __do_softirq+0x262/0x98c kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:603 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 8247: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521 slab_post_alloc_hook mm/slab.h:584 [inline] slab_alloc mm/slab.c:3320 [inline] kmem_cache_alloc+0x121/0x710 mm/slab.c:3484 sock_alloc_inode+0x1c/0x1d0 net/socket.c:240 alloc_inode+0x68/0x1e0 fs/inode.c:230 new_inode_pseudo+0x19/0xf0 fs/inode.c:919 sock_alloc+0x41/0x270 net/socket.c:560 __sock_create+0xc2/0x730 net/socket.c:1384 sock_create net/socket.c:1471 [inline] __sys_socket+0x103/0x220 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket net/socket.c:1520 [inline] __ia32_sys_socket+0x73/0xb0 net/socket.c:1520 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 Freed by task 17: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kmem_cache_free+0x86/0x320 mm/slab.c:3694 sock_free_inode+0x20/0x30 net/socket.c:261 i_callback+0x44/0x80 fs/inode.c:219 __rcu_reclaim kernel/rcu/rcu.h:222 [inline] rcu_do_batch kernel/rcu/tree.c:2183 [inline] rcu_core+0x570/0x1540 kernel/rcu/tree.c:2408 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2417 __do_softirq+0x262/0x98c kernel/softirq.c:292 The buggy address belongs to the object at ffff88801e0b4000 which belongs to the cache sock_inode_cache of size 1152 The buggy address is located 120 bytes inside of 1152-byte region [ffff88801e0b4000, ffff88801e0b4480) The buggy address belongs to the page: page:ffffea0000782d00 refcount:1 mapcount:0 mapping:ffff88807aa59c40 index:0xffff88801e0b4ffd raw: 00fffe0000000200 ffffea00008e6c88 ffffea0000782d48 ffff88807aa59c40 raw: ffff88801e0b4ffd ffff88801e0b4000 0000000100000003 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801e0b3f00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88801e0b3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801e0b4000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801e0b4080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801e0b4100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: abf9d537 ("llc: add support for SO_BINDTODEVICE") Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 27d53323 ] In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set skb's dst. However, it will eventually call inet6_csk_xmit() or ip_queue_xmit() where skb's dst will be overwritten by: skb_dst_set_noref(skb, dst); without releasing the old dst in skb. Then it causes dst/dev refcnt leak: unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This can be reproduced by simply running: # modprobe l2tp_eth && modprobe l2tp_ip # sh ./tools/testing/selftests/net/l2tp.sh So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst should be dropped. This patch is to fix it by removing skb_dst_set() from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core(). Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
James Chapman <jchapman@katalix.com> Tested-by:
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 5eff0690 ] IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to incomplete IPsec ACQUIRE messages being sent to userspace. Currently, both raw sockets and IPv6 ping sockets set those fields. Expected output of "ip xfrm monitor": acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> Currently with ping sockets: acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> The Libreswan test suite found this problem after Fedora changed the value for the sysctl net.ipv4.ping_group_range. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:
Paul Wouters <pwouters@redhat.com> Tested-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Davide Caratti authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit c8b1d743 upstream. we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Vineet Gupta authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit b7faf971 upstream. Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 00fdec98 upstream. Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code). However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context. Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too. This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 41855a89 upstream. clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Boris Burkov authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 6bf9cd2e upstream. Under somewhat convoluted conditions, it is possible to attempt to release an extent_buffer that is under io, which triggers a BUG_ON in btrfs_release_extent_buffer_pages. This relies on a few different factors. First, extent_buffer reads done as readahead for searching use WAIT_NONE, so they free the local extent buffer reference while the io is outstanding. However, they should still be protected by TREE_REF. However, if the system is doing signficant reclaim, and simultaneously heavily accessing the extent_buffers, it is possible for releasepage to race with two concurrent readahead attempts in a way that leaves TREE_REF unset when the readahead extent buffer is released. Essentially, if two tasks race to allocate a new extent_buffer, but the winner who attempts the first io is rebuffed by a page being locked (likely by the reclaim itself) then the loser will still go ahead with issuing the readahead. The loser's call to find_extent_buffer must also race with the reclaim task reading the extent_buffer's refcount as 1 in a way that allows the reclaim to re-clear the TREE_REF checked by find_extent_buffer. The following represents an example execution demonstrating the race: CPU0 CPU1 CPU2 reada_for_search reada_for_search readahead_tree_block readahead_tree_block find_create_tree_block find_create_tree_block alloc_extent_buffer alloc_extent_buffer find_extent_buffer // not found allocates eb lock pages associate pages to eb insert eb into radix tree set TREE_REF, refs == 2 unlock pages read_extent_buffer_pages // WAIT_NONE not uptodate (brand new eb) lock_page if !trylock_page goto unlock_exit // not an error free_extent_buffer release_extent_buffer atomic_dec_and_test refs to 1 find_extent_buffer // found try_release_extent_buffer take refs_lock reads refs == 1; no io atomic_inc_not_zero refs to 2 mark_buffer_accessed check_buffer_tree_ref // not STALE, won't take refs_lock refs == 2; TREE_REF set // no action read_extent_buffer_pages // WAIT_NONE clear TREE_REF release_extent_buffer atomic_dec_and_test refs to 1 unlock_page still not uptodate (CPU1 read failed on trylock_page) locks pages set io_pages > 0 submit io return free_extent_buffer release_extent_buffer dec refs to 0 delete from radix tree btrfs_release_extent_buffer_pages BUG_ON(io_pages > 0)!!! We observe this at a very low rate in production and were also able to reproduce it in a test environment by introducing some spurious delays and by introducing probabilistic trylock_page failures. To fix it, we apply check_tree_ref at a point where it could not possibly be unset by a competing task: after io_pages has been incremented. All the codepaths that clear TREE_REF check for io, so they would not be able to clear it after this point until the io is done. Stack trace, for reference: [1417839.424739] ------------[ cut here ]------------ [1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841! [1417839.447024] invalid opcode: 0000 [#1] SMP [1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0 [1417839.517008] Code: ed e9 ... [1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202 [1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028 [1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0 [1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238 [1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000 [1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90 [1417839.651549] FS: 00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000 [1417839.669810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0 [1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1417839.731320] Call Trace: [1417839.737103] release_extent_buffer+0x39/0x90 [1417839.746913] read_block_for_search.isra.38+0x2a3/0x370 [1417839.758645] btrfs_search_slot+0x260/0x9b0 [1417839.768054] btrfs_lookup_file_extent+0x4a/0x70 [1417839.778427] btrfs_get_extent+0x15f/0x830 [1417839.787665] ? submit_extent_page+0xc4/0x1c0 [1417839.797474] ? __do_readpage+0x299/0x7a0 [1417839.806515] __do_readpage+0x33b/0x7a0 [1417839.815171] ? btrfs_releasepage+0x70/0x70 [1417839.824597] extent_readpages+0x28f/0x400 [1417839.833836] read_pages+0x6a/0x1c0 [1417839.841729] ? startup_64+0x2/0x30 [1417839.849624] __do_page_cache_readahead+0x13c/0x1a0 [1417839.860590] filemap_fault+0x6c7/0x990 [1417839.869252] ? xas_load+0x8/0x80 [1417839.876756] ? xas_find+0x150/0x190 [1417839.884839] ? filemap_map_pages+0x295/0x3b0 [1417839.894652] __do_fault+0x32/0x110 [1417839.902540] __handle_mm_fault+0xacd/0x1000 [1417839.912156] handle_mm_fault+0xaa/0x1c0 [1417839.921004] __do_page_fault+0x242/0x4b0 [1417839.930044] ? page_fault+0x8/0x30 [1417839.937933] page_fault+0x1e/0x30 [1417839.945631] RIP: 0033:0x33c4bae [1417839.952927] Code: Bad RIP value. [1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206 [1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000 [1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 [1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8 [1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79 [1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1888690 This reverts commit 90ecba9f1041f436ed2b35ba7a970c7cc5d0df23 which is commit 2bbcaaee upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by:
Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Paolo Bonzini authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 5ecad245 upstream. Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but reserves it in PML4Es. Probably, earlier versions of the AMD manual documented it as reserved in PDPEs as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it. Cc: stable@vger.kernel.org Reported-by:
Nadav Amit <namit@vmware.com> Fixes: a0c0feb5 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03) Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit e337bf19 upstream. These devices claim to be 96kHz mono, but actually are 48kHz stereo with swapped channels and unaligned transfers. Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit 6a6ca788 upstream. We have a Dell AIO, there is neither internal speaker nor internal mic, only a multi-function audio jack on it. Users reported that after freshly installing the OS and plug a headset to the audio jack, the headset can't output sound. I reproduced this bug, at that moment, the Input Source is as below: Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Headphone Mic' 'Headset Mic' Item0: 'Headphone Mic' That is because the patch_realtek will set this audio jack as mic_in mode if Input Source's value is hp_mic. If it is not fresh installing, this issue will not happen since the systemd will run alsactl restore -f /var/lib/alsa/asound.state, this will set the 'Input Source' according to history value. If there is internal speaker or internal mic, this issue will not happen since there is valid sink/source in the pulseaudio, the PA will set the 'Input Source' according to active_port. To fix this issue, change the parser function to let the hs_mic be stored ahead of hp_mic. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200625083833.11264-1-hui.wang@canonical.comSigned-off-by:
-
xidongwang authored
BugLink: https://bugs.launchpad.net/bugs/1888690 commit ad155712 upstream. The stack object “info” in snd_opl3_ioctl() has a leaking problem. It has 2 padding bytes which are not initialized and leaked via “copy_to_user”. Signed-off-by:
xidongwang <wangxidong_97@163.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1594006058-30362-1-git-send-email-wangxidong_97@163.comSigned-off-by:
-
Wei Li authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 8523c006 ] After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f ("arm64: KGDB: Add step debugging support") Signed-off-by:
Wei Li <liwei391@huawei.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Vinod Koul authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit f79a732a ] On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING state, so set that for partially draining streams in snd_compr_drain_notify() and use a flag for partially draining streams While at it, add locks for stream state change in snd_compr_drain_notify() as well. Fixes: f44f2a54 ("ALSA: compress: fix drain calls blocking other compress functions (v6)") Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.orgSigned-off-by:
-
Andre Edich authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 3ed58f96 ] In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind. Fixes: bbd9f9ee ("smsc95xx: add wol support for more frame types") Signed-off-by:
Andre Edich <andre.edich@microchip.com> Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by:
-
Andre Edich authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 7c8b1e85 ] The return value of the function smsc95xx_reset() must be checked to avoid returning false success from the function smsc95xx_bind(). Fixes: 2f7ca802 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
-
Li Heng authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 8a259e6b ] t4_prep_fw goto bye tag with positive return value when something bad happened and which can not free resource in adap_init0. so fix it to return negative value. Fixes: 16e47624 ("cxgb4: Add new scheme to update T4/T5 firmware") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Li Heng <liheng40@huawei.com> Signed-off-by:
-
Tomas Henzl authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit afe89f11 ] The sense data buffer in sense_buf_pool is allocated with size of MPT_SENSE_BUFFER_ALLOC(64) (multiplied by req_depth) while SNS_LEN(sc)(96) is used when reading the data. That may lead to a read from unallocated area, sometimes from another (unallocated) page. To fix this, limit the read size to MPT_SENSE_BUFFER_ALLOC. Link: https://lore.kernel.org/r/20200616150446.4840-1-thenzl@redhat.comCo-developed-by:
Stanislav Saner <ssaner@redhat.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Zhenzhong Duan authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 06096cc6 ] If an spi device is unbounded from the driver before the release process, there will be an NULL pointer reference when it's referenced in spi_slave_abort(). Fix it by checking it's already freed before reference. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Link: https://lore.kernel.org/r/20200618032125.4650-2-zhenzhong.duan@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Zhenzhong Duan authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit abd42781 ] Imagine below scene, spidev is referenced after it's freed. spidev_release() spidev_remove() ... spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; spin_unlock_irq(&spidev->spi_lock); mutex_lock(&device_list_lock); dofree = (spidev->spi == NULL); if (dofree) kfree(spidev); mutex_unlock(&device_list_lock); mutex_lock(&device_list_lock); list_del(&spidev->device_entry); device_destroy(spidev_class, spidev->devt); clear_bit(MINOR(spidev->devt), minors); if (spidev->users == 0) kfree(spidev); mutex_unlock(&device_list_lock); Fix it by resetting spidev->spi in device_list_lock's protection. Signed-off-by:
-
Christian Borntraeger authored
BugLink: https://bugs.launchpad.net/bugs/1888690 [ Upstream commit 77491129 ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.comSigned-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by:
-
- 20 Jul, 2020 3 commits
-
-
Ian May authored
Signed-off-by:Ian May <ian.may@canonical.com>
-
Ian May authored
BugLink: https://bugs.launchpad.net/bugs/1888274 Properties: no-test-build Signed-off-by:
-
Ian May authored
Ignore: yes Signed-off-by:
-
- 17 Jul, 2020 1 commit
-
-
Mauricio Faria de Oliveira authored
BugLink: https://bugs.launchpad.net/bugs/1867916 It's possible for a block driver to set logical block size to a value greater than page size incorrectly; e.g. bcache takes the value from the superblock, set by the user w/ make-bcache. This causes a BUG/NULL pointer dereference in the path: __blkdev_get() -> set_init_blocksize() // set i_blkbits based on ... -> bdev_logical_block_size() -> queue_logical_block_size() // ... this value -> bdev_disk_changed() ... -> blkdev_readpage() -> block_read_full_page() -> create_page_buffers() // size = 1 << i_blkbits -> create_empty_buffers() // give size/take pointer -> alloc_page_buffers() // return NULL .. BUG! Because alloc_page_buffers() is called with size > PAGE_SIZE, thus it initializes head = NULL, skips the loop, return head; then create_empty_buffers() gets (and uses) the NULL pointer. This has been around longer than commit ad6bf88a ("block: fix an integer overflow in logical block size"); however, it increased the range of values that can trigger the issue. Previously only 8k/16k/32k (on x86/4k page size) would do it, as greater values overflow unsigned short to zero, and queue_ logical_block_size() would then use the default of 512. Now the range with unsigned int is much larger, and users w/ the 512k value, which happened to be zero'ed previously and work fine, started to hit this issue -- as the zero is gone, and queue_logical_block_size() does return 512k (>PAGE_SIZE.) Fix this by checking the bcache device's logical block size, and if it's greater than page size, fallback to the backing/ cached device's logical page size. This doesn't affect cache devices as those are still checked for block/page size in read_super(); only the backing/cached devices are not. Apparently it's a regression from commit 2903381f ("bcache: Take data offset from the bdev superblock."), moving the check into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks of backing devices out there with this larger value, we cannot refuse to load them (i.e., have a similar check in _BDEV.) Ideally perhaps bcache should use all values from the backing device (physical/logical/io_min block size)? But for now just fix the problematic case. Test-case: # IMG=/root/disk.img # dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G # DEV=$(losetup --find --show $IMG) # make-bcache --bdev $DEV --block 8k < see dmesg > Before: # uname -r 5.7.0-rc7 [ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4 ... [ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100 ... [ 55.966434] Call Trace: [ 55.967021] create_page_buffers+0x48/0x50 [ 55.967834] block_read_full_page+0x49/0x380 [ 55.972181] do_read_cache_page+0x494/0x610 [ 55.974780] read_part_sector+0x2d/0xaa [ 55.975558] read_lba+0x10e/0x1e0 [ 55.977904] efi_partition+0x120/0x5a6 [ 55.980227] blk_add_partitions+0x161/0x390 [ 55.982177] bdev_disk_changed+0x61/0xd0 [ 55.982961] __blkdev_get+0x350/0x490 [ 55.983715] __device_add_disk+0x318/0x480 [ 55.984539] bch_cached_dev_run+0xc5/0x270 [ 55.986010] register_bcache.cold+0x122/0x179 [ 55.987628] kernfs_fop_write+0xbc/0x1a0 [ 55.988416] vfs_write+0xb1/0x1a0 [ 55.989134] ksys_write+0x5a/0xd0 [ 55.989825] do_syscall_64+0x43/0x140 [ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 55.991519] RIP: 0033:0x7f7d60ba3154 ... After: # uname -r 5.7.0.bcachelbspgsz [ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512) [ 31.675133] bcache: register_bdev() registered backing device loop0 # grep ^ /sys/block/bcache0/queue/*_block_size /sys/block/bcache0/queue/logical_block_size:512 /sys/block/bcache0/queue/physical_block_size:8192 Reported-by:
Ryan Finnie <ryan@finnie.org> Reported-by:
Sebastian Marsching <sebastian@marsching.com> Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> (backported from commit dcacbc12) [mfo: backport: hunks 1/3/4: adjust bcache_device_init() signature and calls for the lack of parameter make_request_fn from upstream. hunk 1: adjust bcache_device_init() signature for 'unsigned (int)', and refresh one context line. hunk 2: change from blk_queue_flag_set/clear() to set/clear_bit().] Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
- 14 Jul, 2020 6 commits
-
-
Kamal Mostafa authored
BugLink: https://bugs.launchpad.net/bugs/1887011 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1887011Signed-off-by:
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1887011 Could you please push this patch into stable@? it fixes memory corruption in kernels v3.5 .. v4.10 Lost .data_len definition leads to write beyond end of struct nf_ct_h323_master. Usually it corrupts following struct nf_conn_nat, however if nat is not loaded it corrupts following slab object. In mainline this problem went away in v4.11, after commit 9f0f3ebe ("netfilter: helpers: remove data_len usage for inkernel helpers") however many stable kernels are still affected. Fixes: 1afc5679 ("netfilter: nf_ct_helper: implement variable length helper private data") # v3.5 cc: stable@vger.kernel.org Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Hauke Mehrtens authored
BugLink: https://bugs.launchpad.net/bugs/1887011 commit fcec538e upstream. This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd93 ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Zhang Xiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1887011 commit 9ffad926 upstream. When xfstest generic/035, we found the target file was deleted if the rename return -EACESS. In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted. We should just delete the target file which created during the rename. Reported-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Paul Aurich authored
BugLink: https://bugs.launchpad.net/bugs/1887011 commit 00dfbc2f upstream. Without this: - persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons Signed-off-by:
Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
