- 01 Nov, 2020 5 commits
-
-
Vaishnav M A authored
Replace of_property_read_u32() with device_property_read_u32(), when reading the amstaos,cover-comp-gain.This opens up the possibility of passing the properties during platform instantiation of the device by a suitable populated struct property_entry. Additionally, a minor change in logic is added to remove the of_node present check. Signed-off-by:
Vaishnav M A <vaishnav@beagleboard.org> Link: https://lore.kernel.org/r/20201018203552.GA816421@ubuntuSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Vaishnav M A authored
Add i2c_device_id table for the vcnl4035 driver, enabling device instantiation using i2c_new_client_device() or from userspace in cases where device-tree based description is not possible now, like device(s) on a gbphy i2c adapter created by greybus. Signed-off-by:
-
Vaishnav M A authored
Add i2c_device_id table for the vl53l0x-i2c driver, helps in device instantiation using i2c_new_client_device() or from userspace in cases where device-tree based description is not possible now, like device(s) on a gbphy i2c adapter created by greybus. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201031134319.2134314-1-trix@redhat.comSigned-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
- 31 Oct, 2020 6 commits
-
-
Mauro Carvalho Chehab authored
A function has a different name between their prototype and its kernel-doc markup. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/46622c3bdcffb76e79719f0fe5011c2952960b32.1603469755.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
-
Tom Rix authored
A semicolon is not needed after a switch statement. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20201027201436.1597726-1-trix@redhat.comSigned-off-by:
-
Jonathan Cameron authored
Simple conversion. Added the #io-channel-cells optional property to allow for consumer bindings if appropriate on a given board. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Mårten Lindahl <martenli@axis.com> Link: https://lore.kernel.org/r/20200809111753.156236-8-jic23@kernel.org
-
Rui Miguel Silva authored
Convert fxas21002c gyroscope sensor bindings documentation to yaml schema, remove the textual bindings document and update MAINTAINERS entry. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
-
- 18 Oct, 2020 1 commit
-
-
Fabien Parent authored
Add documentation for the auxadc binding for MT8516 SoC. Signed-off-by:
Fabien Parent <fparent@baylibre.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
-
- 11 Oct, 2020 1 commit
-
-
Deepak R Varma authored
Add a blank line before starting structure definition as per coding style guidelines. Issue reported by checkpatch script. Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Acked-by:
Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/20201011104800.GA29412@ubuntu204Signed-off-by:
-
- 10 Oct, 2020 21 commits
-
-
Rikard Falkeborn authored
The only usage of mma8452_event_attribute_group is to assign its address to the event_attrs field in the iio_info struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. This was the only non-const static struct in drivers/iio. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200930232939.31131-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Alexandru Ardelean authored
The information in the ad7303 platform_data header is unused, so it's dead code. This change removes it and it's inclusion from the driver. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201001141004.53846-1-alexandru.ardelean@analog.comSigned-off-by:
-
Alexandru Ardelean authored
This change removes the old platform data for ad7298. It is only used to provide whether to use an external regulator as a reference. So, the logic is inverted a bit. The driver now tries to obtain a regulator. If one is provided, then the external ref is used. The rest of the logic should work as before. Signed-off-by:
-
Anand Ashok Dumbre authored
Fixes IIO_VAL_FRACTIONAL for case when the result is negative and exponent is 0. example: if the result is -0.75, tmp0 will be 0 and tmp1 = 75 This causes the output to lose sign because of %d in snprintf which works for tmp0 <= -1. Reported-by: kernel test robot <lkp@intel.com> #error: uninitialized symbol tmp Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> Link: https://lore.kernel.org/r/1601910316-24111-1-git-send-email-anand.ashok.dumbre@xilinx.comSigned-off-by:
-
dmitry.torokhov@gmail.com authored
The order in which 'users' counter is decremented vs calling drivers' close() method is implementation specific, and we should not rely on it. Let's introduce driver private flag and use it to signal ISR to exit when device is being closed. This has a side-effect of fixing issue of accessing inut->users outside of input->mutex protection. Reported-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201006215509.GA2556081@dtor-wsSigned-off-by:
-
Stephen Boyd authored
These properties need to be set during driver probe. Parse any DT properties and replace the default register settings with the ones parsed from DT. Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Cc: Daniel Campello <campello@chromium.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: <devicetree@vger.kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20201007011735.1346994-7-swboyd@chromium.orgSigned-off-by:
-
Stephen Boyd authored
We need to set various bits in the hardware registers for this device to operate properly depending on how it is installed. Add a handful of DT properties to configure these things. Signed-off-by:
-
Stephen Boyd authored
The rising and falling directions can be debounced in the hardware as "close" and "far" debounce settings. Add support for these as rising and falling debounce settings. Signed-off-by:
-
Stephen Boyd authored
Add support for setting the hysteresis as a shifted value of a channel's proximity threshold. Each channel can have a different threshold, but the hysteresis applies to all channels as a right shift factor. Therefore, duplicate the hysteresis value across all channels and make it depend on the channel's proximity threshold. This is sort of odd but seems to work in practice as most of the time only one channel is used. Signed-off-by:
-
Stephen Boyd authored
Add support to set the proximity thresholds for each channel. Signed-off-by:
-
Stephen Boyd authored
Add support to set the hardware gain of the channels as a multiplier of 2x, 4x, or 8x. Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
-
Lorenzo Bianconi authored
Add support to STM LSM6DST (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6dst.pdfSigned-off-by:
-
Alexandru Ardelean authored
This change inverts/reworks the logic to use an external reference via a provided regulator. Now the driver tries to obtain a regulator. If one is found, then it is used. The rest of the driver logic already checks if there is a non-NULL reference to a regulator, so it should be fine. Signed-off-by:
-
Alexandru Ardelean authored
The AT91 ADC driver no longer uses the 'at91_add_device_adc' platform data type. This is no longer used (at least in mainline boards). This change removes the platform-data initialization from the driver, since it is mostly dead code now. Some definitions [from the platform data at91_adc.h include] have been moved in the driver, since they are needed in the driver. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200930135048.11530-5-alexandru.ardelean@analog.comSigned-off-by:
-
Alexandru Ardelean authored
This tries to solve a warning reported by the lkp bot: >> drivers/iio/adc/at91_adc.c:1439:34: warning: unused variable >> 'at91_adc_dt_ids' [-Wunused-const-variable] static const struct of_device_id at91_adc_dt_ids[] = { ^ 1 warning generated. This warning has appeared after the AT91_ADC driver compilation has been enabled via the COMPILE_TEST symbol dependency. The warning is caused by the 'of_match_ptr()' helper which returns NULL if OF is undefined. This driver should build only for device-tree context, so a dependency on the OF Kconfig symbol has been added. Also, the usage of of_match_ptr() helper has been removed since it shouldn't ever return NULL (because the driver should not be built for the non-OF context). Fixes: 4027860d ("iio: Kconfig: at91_adc: add COMPILE_TEST dependency to driver") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Alexandru Ardelean authored
The main intent is to get rid of the cast for the void-pointer returned by of_device_get_match_data(). This requires const-ifying the 'caps' and 'registers' references on the at91_adc_state struct. The caps can be obtained also from the old platform_data (in the at91_adc_probe_pdata() function), but that cast is not touched in this patch, since the old platform_data should be removed/cleaned-away. Also, that cast deals with converting a kernel_ulong_t type to a pointer. So, updating that cast doesn't yield any benefit. Signed-off-by:
-
Alexandru Ardelean authored
This is a small tidy-up. The of_device_get_match_data() helper retrieves the driver data from the OF table, without needed to explicitly know the table variable (since it can retrieve it from the driver object). Signed-off-by:
-
Michael Auchter authored
Add a binding for AD5686 Signed-off-by:
Michael Auchter <michael.auchter@ni.com> Reviewed-by:
-
Michael Auchter authored
Add of_match_table to this driver, so devices can be probed based on device tree contents. Signed-off-by:
-
Michael Auchter authored
The AD5338R is a 10-bit DAC with 2 outputs and an internal 2.5V reference (enabled by default). The register configuration is nearly identical to the AD5696R DAC that's already supported by this driver, with the channel selection bits being the only thing different. Signed-off-by:
-
- 09 Oct, 2020 1 commit
-
-
Fan Fei authored
This patch fix long lines found by checkpatch. Signed-off-by:
Fan Fei <ffclaire1224@gmail.com> Link: https://lore.kernel.org/r/20201008185524.brl467kucslxoxci@ubuntu-T470Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 Oct, 2020 5 commits
-
-
Jérôme Pouiller authored
The device can be connected on SPI or on SDIO. The original file described the two options separately. So, most of the file had to be rewritten in order to match with the Yaml requirements. Some device requirements are still written in the comments since they cannot been expressed with the current scheme (e.g. reg must be set to 1 with SDIO, interrupt is mandatory with SPI, reset-gpio in SPI is replaced by mmc-pwrseq in SDIO, etc...). The examples provided have also been reworked in order to make dt_binding_check happy. Finally, also fix typo in the name of the file (siliabs instead of silabs) Signed-off-by:
Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20201007101943.749898-7-Jerome.Pouiller@silabs.comSigned-off-by:
-
Jérôme Pouiller authored
Most of the files have been modified in 2020, so update the copyright notices. Signed-off-by:
-
Jérôme Pouiller authored
The device is in charge of respecting the QoS constraints. The driver have to ensure that all the queues contain data and the device choose the right queue to send. The things starts to be more difficult when the bandwidth of the bus is lower than the bandwidth of the WiFi. The device quickly sends the frames of the highest priority queue. Then, it starts to send frames from a lower priority queue. Though, there are still some high priority frames waiting in the driver. To work around this problem, this patch add some priorities to each queue. The weigh of the queue was (roughly) calculated experimentally by checking the speed ratio of each queue when the bus does not limit the traffic: - Be/Bk -> 20Mbps/10Mbps - Vi/Be -> 36Mbps/180Kbps - Vo/Be -> 35Mbps/600Kbps - Vi/Vo -> 24Mbps/12Mbps So, if we fix the weigh of the Background to 1, the weight of Best Effort should be 2. The weight of Video should be 116. However, since there is only 32 queues, it make no sense to use a value greater than 64[1]. And finally, the weight of the Voice is set to 128. [1] Because of this approximation, with very slow bus, we can still observe frame starvation when we measure the speed ratio of Vi/Be. It is around 35Mbps/1Mbps (instead of 36Mbps/180Kbps). However, it is still in accepted error range. Signed-off-by: -
Jérôme Pouiller authored
Firmwares with API < 3.6 do not forward DELBA requests. Thus, when a Block Ack session is restarted, the reordering buffer is not flushed and the received sequence number is not contiguous. Therefore, mac80211 starts to wait some missing frames that it will never receive. This patch disables the reordering buffer for old firmware. It is harmless when the network is unencrypted. When the network is encrypted, the non-contiguous frames will be thrown away by the TKIP/CCMP replay protection. So, the user will observe some packet loss with UDP and performance drop with TCP. Fixes: e5da5fbd ("staging: wfx: fix CCMP/TKIP replay protection") Signed-off-by:
-
Jérôme Pouiller authored
Commit e8d607ce ("staging: wfx: drop 'secure link' feature") had removed the 'secure link' feature. However, a few lines of codes were yet here. Fixes: e8d607ce ("staging: wfx: drop 'secure link' feature") Signed-off-by:
-
