- 03 Feb, 2017 40 commits
-
-
Jiri Pirko authored
The PTAR register is used for allocation of regions in the TCAM. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The PAGT register is used for configuration of the ACL Group Table. Signed-off-by:
-
Jiri Pirko authored
The PACL register is used for configuration of the ACL. Signed-off-by:
-
Jiri Pirko authored
Sometimes it is handy to get a pointer to a char buffer item and use it direcly to write/read data. So add these helpers. Signed-off-by:
-
Jiri Pirko authored
Item heplers for 8bit values are needed, let's add them. Signed-off-by:
-
Zhu Yanjun authored
The function bond_info_query alwarys returns 0. As such, in the function bond_do_ioctl, it is not necessary to check the returned value. So the interface type of the function bond_info_query is changed to void. The redundant check is removed. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Eric Dumazet authored
Josef Bacik diagnosed following problem : I was seeing random disconnects while testing NBD over loopback. This turned out to be because NBD sets pfmemalloc on it's socket, however the receiving side is a user space application so does not have pfmemalloc set on its socket. This means that sk_filter_trim_cap will simply drop this packet, under the assumption that the other side will simply retransmit. Well we do retransmit, and then the packet is just dropped again for the same reason. It seems the better way to address this problem is to clear pfmemalloc in the TCP transmit path. pfmemalloc strict control really makes sense on the receive path. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Eric Dumazet authored
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot of code, we also remove one spin_lock() from driver fast path. Signed-off-by:
-
Eric Dumazet authored
Compared to custom busy_poll, the generic NAPI one is simpler and removes a lot of code. It removes one atomic in the fast path (when busy poll is not in action) since we do not have to use an extra spinlock. Signed-off-by:
-
Eric Dumazet authored
Compared to custom busy_poll, the generic NAPI one is better, since it allows to use GRO, and it removes a lot of code and extra locked operations in fast path. Signed-off-by:
-
David Ahern authored
IPv6 stack does not set the protocol for local routes, so those routes show up with proto "none": $ ip -6 ro ls table local local ::1 dev lo proto none metric 0 pref medium local 2100:3:: dev lo proto none metric 0 pref medium local 2100:3::4 dev lo proto none metric 0 pref medium local fe80:: dev lo proto none metric 0 pref medium ... Set rt6i_protocol to RTPROT_KERNEL for consistency with IPv4. Now routes show up with proto "kernel": $ ip -6 ro ls table local local ::1 dev lo proto kernel metric 0 pref medium local 2100:3:: dev lo proto kernel metric 0 pref medium local 2100:3::4 dev lo proto kernel metric 0 pref medium local fe80:: dev lo proto kernel metric 0 pref medium ... Signed-off-by:David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Daniel Borkmann authored
Steven suggested to improve trace_print_hex_seq() a bit after commit 2acae0d5 ("trace: add variant without spacing in trace_print_hex_seq") in two ways: i) by adding a kdoc comment for the helper function itself and ii) by renaming 'spacing' argument into 'concatenate' to better denote that we don't add spaces between each hex bytes. Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Jiri Pirko authored
Ivan will be taking care of switchdev code from now on. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== bridge: per vlan dst_metadata support High level summary: lwt and dst_metadata have enabled vxlan l3 deployments to use a single vxlan netdev for multiple vnis eliminating the scalability problem with using a single vxlan netdev per vni. This series tries to do the same for vxlan netdevs in pure l2 bridged networks. Use-case/deployment and details are below. Deployment scerario details: As we know VXLAN is used to build layer 2 virtual networks across the underlay layer3 infrastructure. A VXLAN tunnel endpoint (VTEP) originates and terminates VXLAN tunnels. And a VTEP can be a TOR switch or a vswitch in the hypervisor. This patch series mainly focuses on the TOR switch configured as a Vtep. Vxlan segment ID (vni) along with vlan id is used to identify layer 2 segments in a vxlan overlay network. Vxlan bridging is the function provided by Vteps to terminate vxlan tunnels and map the vxlan vni to traditional end host vlan. This is covered in the "VXLAN Deployment Scenarios" in sections 6 and 6.1 in RFC 7348. To provide vxlan bridging function, a vtep has to map vlan to a vni. The rfc says that the ingress VTEP device shall remove the IEEE 802.1Q VLAN tag in the original Layer 2 packet if there is one before encapsulating the packet into the VXLAN format to transmit it through the underlay network. The remote VTEP devices have information about the VLAN in which the packet will be placed based on their own VLAN-to-VXLAN VNI mapping configurations. Existing solution: Without this patch series one can deploy such a vtep configuration by adding the local ports and vxlan netdevs into a vlan filtering bridge. The local ports are configured as trunk ports carrying all vlans. A vxlan netdev per vni is added to the bridge. Vlan mapping to vni is achieved by configuring the vlan as pvid on the corresponding vxlan netdev. The vxlan netdev only receives traffic corresponding to the vlan it is mapped to. This configuration maps traffic belonging to a vlan to the corresponding vxlan segment. ----------------------------------- | bridge | | | ----------------------------------- |100,200 |100 (pvid) |200 (pvid) | | | swp1 vxlan1000 vxlan2000 This provides the required vxlan bridging function but poses a scalability problem with using a separate vxlan netdev for each vni. Solution in this patch series: The Goal is to use a single vxlan device to carry all vnis similar to the vxlan collect metadata mode but additionally allowing the bridge and vxlan driver to carry all the forwarding information and also learn. This implementation uses the existing dst_metadata infrastructure to map vlan to a tunnel id. - vxlan driver changes: - enable collect metadata mode to be used with learning, replication and fdb - A single fdb table hashed by (mac, vni) - rx path already has the vni - tx path expects a vni in the packet with dst_metadata and relies on learnt or static forwarding information table to forward the packet - Bridge driver changes: per vlan dst_metadata support: - Our use case is vxlan and 1-1 mapping between vlan and vni, but I have kept the api generic for any tunnel info - Uapi to configure/unconfigure/dump per vlan tunnel data - new bridge port flag to turn this feature on/off. off by default - ingress hook: - if port is a tunnel port, use tunnel info in attached dst_metadata to map it to a local vlan - egress hook: - if port is a tunnel port, use tunnel info attached to vlan to set dst_metadata on the skb Other approaches tried and vetoed: - tc vlan push/pop and tunnel metadata dst: - though tc can be used to do part of this, these patches address a deployment case where bridge driver vlan filtering and forwarding information database along with vxlan driver forwarding information table and learning are required. - making vxlan driver understand vlan-vni mapping: - I had a series almost ready with this one but soon realized it duplicated a lot of vlan handling code in the vxlan driver ==================== Signed-off-by: -
Roopa Prabhu authored
- ingress hook: - if port is a tunnel port, use tunnel info in attached dst_metadata to map it to a local vlan - egress hook: - if port is a tunnel port, use tunnel info attached to vlan to set dst_metadata on the skb CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: -
Roopa Prabhu authored
New nested netlink attribute to associate tunnel info per vlan. This is used by bridge driver to send tunnel metadata to bridge ports in vlan tunnel mode. This patch also adds new per port flag IFLA_BRPORT_VLAN_TUNNEL to enable vlan tunnel mode. off by default. One example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). User can configure per-vlan tunnel information which the bridge driver can use to bridge vlan into the corresponding vn-segment. Signed-off-by:
-
Roopa Prabhu authored
Vxlan COLLECT_METADATA mode today solves the per-vni netdev scalability problem in l3 networks. It expects all forwarding information to be present in dst_metadata. This patch series enhances collect metadata mode to include the case where only vni is present in dst_metadata, and the vxlan driver can then use the rest of the forwarding information datbase to make forwarding decisions. There is no change to default COLLECT_METADATA behaviour. These changes only apply to COLLECT_METADATA when used with the bridging use-case with a special dst_metadata tunnel info flag (eg: where vxlan device is part of a bridge). For all this to work, the vxlan driver will need to now support a single fdb table hashed by mac + vni. This series essentially makes this happen. use-case and workflow: vxlan collect metadata device participates in bridging vlan to vn-segments. Bridge driver above the vxlan device, sends the vni corresponding to the vlan in the dst_metadata. vxlan driver will lookup forwarding database with (mac + vni) for the required remote destination information to forward the packet. Changes introduced by this patch: - allow learning and forwarding database state in vxlan netdev in COLLECT_METADATA mode. Current behaviour is not changed by default. tunnel info flag IP_TUNNEL_INFO_BRIDGE is used to support the new bridge friendly mode. - A single fdb table hashed by (mac, vni) to allow fdb entries with multiple vnis in the same fdb table - rx path already has the vni - tx path expects a vni in the packet with dst_metadata - prior to this series, fdb remote_dsts carried remote vni and the vxlan device carrying the fdb table represented the source vni. With the vxlan device now representing multiple vnis, this patch adds a src vni attribute to the fdb entry. The remote vni already uses NDA_VNI attribute. This patch introduces NDA_SRC_VNI netlink attribute to represent the src vni in a multi vni fdb table. iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's. before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metadata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self Signed-off-by: -
Roopa Prabhu authored
New ip_tunnel_info flag to represent bridged tunnel metadata. Used by bridge driver later in the series to pass per vlan dst metadata to bridge ports. Signed-off-by:
-
David S. Miller authored
Yotam Gigi says: ==================== Extract IFE logic to module Extract ife logic from the tc_ife action into an independent module, and make the tc_ife action use it. This way, the ife encapsulation can be used by other modules other than tc_ife action. v1->v2: Fix duplicate symbol error by introducing a new patch that makes the original symbol static. The symbol ife_tlv_meta_extract is exported in act_ife, though not being used by any other module. As the symbol is being moved to the new ife module, introducing the new module creates duplicate symbol. To fix it, add a new patch (1/3) that makes the ife_tlv_meta_extract symbol static in act_ife, thus the symbol does not collide. ==================== Signed-off-by: -
Yotam Gigi authored
Use the encode/decode functionality from the ife module instead of using implementation inside the act_ife. Reviewed-by:
Yotam Gigi <yotamg@mellanox.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Yotam Gigi authored
This module is responsible for the ife encapsulation protocol encode/decode logics. That module can: - ife_encode: encode skb and reserve space for the ife meta header - ife_decode: decode skb and extract the meta header size - ife_tlv_meta_encode - encodes one tlv entry into the reserved ife header space. - ife_tlv_meta_decode - decodes one tlv entry from the packet - ife_tlv_meta_next - advance to the next tlv Reviewed-by:
-
Yotam Gigi authored
As the function ife_tlv_meta_encode is not used by any other module, unexport it and make it static for the act_ife module. Signed-off-by:
-
Eric Dumazet authored
Small cleanup factorizing code doing the TCP_MAXSEG clamping. Signed-off-by:
-
Arnd Bergmann authored
On large SMP builds, we can run into a build warning: drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_set_irq_affinity.isra.27': drivers/net/ethernet/hisilicon/hns/hns_enet.c:1242:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] The solution here is to use cpumask_var_t, which can use dynamic allocation when CONFIG_CPUMASK_OFFSTACK is enabled. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Eric Dumazet authored
Generic NAPI busy polling allows us to remove custom implementations found in drivers. It is possible further optimization could be done by testing napi_complete_done() return value. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Eric Dumazet authored
It is time to add GRO support to this driver. Signed-off-by:
-
Arjun V authored
Without any uld being loaded, uld_txq_info[] will be NULL. uld_send() is also used for sending control work requests(for eg: setting filter) that dont require any ulds to be loaded. Hence move uld_txq_info[] assignment after ctrl_xmit(). Also added a NULL check for uld_txq_info[]. Fixes: 94cdb8bb (cxgb4: Add support for dynamic allocation of resources for ULD). Signed-off-by:
Arjun V <arjun@chelsio.com> Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Eric Dumazet authored
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of tricky code, we also remove one lock operation in fast path. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Eric Dumazet authored
In linux-4.5, busy polling was implemented in core NAPI stack, meaning that all custom implementation can be removed from drivers. Not only we remove lot's of tricky code, we also remove one lock operation in fast path. Signed-off-by:
-
Eric Dumazet authored
Debugging issues caused by pfmemalloc is often tedious. Add a new SNMP counter to more easily diagnose these problems. Signed-off-by:
-
David Ahern authored
nothing in devinet.c relies on fib_lookup.h; remove it from the includes Signed-off-by:
-
Eric Dumazet authored
When __alloc_skb() allocates an skb from fast clone cache, setting pfmemalloc on the clone is not needed. Clone will be properly initialized later at skb_clone() time, including pfmemalloc field, as it is included in the headers_start/headers_end section which is fully copied. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== MV88E6390 fixes Two patches, which have been posted before. Fix simple issues in the mv88e6390 support. These don't need to go to stable, since the mv88e6390 support in stable is insufficient to be usable. To apply cleanly, these patches rely on "net: dsa: mv88e6xxx: Workaround missing PHY". v2: Added Reviewed-by. Removed a redundant "the" ==================== Signed-off-by: -
Andrew Lunn authored
In order to enable 2.5Gbps mode, we need the base speed of 10G, plus the Alt bit setting. Fix a typ0 that used 1Gb base speed. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Andrew Lunn authored
The MV88E6390 family uses a different ATU age timer coefficient. Fix the info structures. Signed-off-by:
-
Andrew Lunn authored
The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on the zii-devel-b board. Add support for it to the Marvell PHY driver. Signed-off-by:
-
Heiner Kallweit authored
Most likely a copy & paste error in referenced commit. Restore the debug message to what it was before. Fixes: f573c0b9 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-By:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Heiner Kallweit authored
Chips like Amlogic S905GXBB are supported by this driver but don't have support for PTP. Add a separate warning for missing HW support to differentiate it from other actual failures. Signed-off-by:
-
Heiner Kallweit authored
As documented in Documentation/devicetree/bindings/net/ethernet.txt, in RGMII_ID and RGMII_TXID mode the MAC should not add a tx delay. Signed-off-by:
-
