- 15 Jul, 2024 32 commits
-
-
Dmitry Antipov authored
After commit 78db544b ("Bluetooth: hci_core: Remove le_restart_scan work"), 'scan_start' and 'scan_duration' of 'struct discovery_state' are still initialized but actually unused. So remove the aforementioned fields and adjust 'hci_discovery_filter_clear()' and 'le_scan_disable()' accordingly. Compile tested only. Fixes: 78db544b ("Bluetooth: hci_core: Remove le_restart_scan work") Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Hilda Wu authored
Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Hilda Wu <hildawu@realtek.com> Signed-off-by:
-
Iulia Tanasescu authored
On a Broadcast Sink, after synchronizing to the PA transimitted by a Broadcast Source, the BIGInfo advertising reports emitted by the Controller hold the encryption field, which indicates whether the Broadcast Source is transmitting encrypted streams. This updates the PA sync hcon QoS with the encryption value reported in the BIGInfo report, so that this information is accurate if the userspace tries to access the QoS struct via getsockopt. Fixes: 1d11d70d ("Bluetooth: ISO: Pass BIG encryption info through QoS") Signed-off-by:
Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by:
-
Neeraj Sanjay Kale authored
This handles the timeout error codes sent by the chip as part of the bootloader signatures during firmware download process. When the bootloader does not receive a response packet from the host within a specific time, it adds an error code to the bootloader signature while requesting for the FW chunk from the same offset. The host is expected to clear this error code with a NAK, and reply to only those bootloader signatures which have error code 0. However, the driver was ignoring this error code and replying with the firmware chunks instead, which is apparently ignored by the chip and the chip resends the same bootloader signature with the error code again. This happens in a loop until the error code self clears and firmware download proceeds ahead, adding a couple of milliseconds to the total firmware download time. Commit 689ca16e was an initial implementation which simply printed the following line during driver debug: - FW Download received err 0x04 from chip This commit adds the expected handling to the error codes. This error handling is valid for data_req bootloader signatures for V3 and future bootloader versions. Signed-off-by:
Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Fixes: 689ca16e ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets") Signed-off-by:
-
Neeraj Sanjay Kale authored
This updates the firmware names of 3 chipsets: w8987, w8997, w9098. These changes are been done to standardize chip specific firmware file names to be in sync with firmware names of newer chipsets. The naming convention for BT-only files would be as follows: For dual-radio WiFi+BT chipsets: - <protocol-BT><chip-name>_bt_v<HW-version>.bin For tri-radio WiFi+BT+15.4 chipsets: - <protocol-BT><protocol-15.4><chip-name>_bt_v<HW-version>.bin To maintain backward compatibility, this commit adds a provision to request older firmware file name, if new firmware file name not found in /lib/firmware/nxp/. A new device tree property has been introduced called firmware-name, to override the hardcoded firmware names (old and new) in the driver. Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds a new optional device tree property called firware-name. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Hector Martin authored
This new variant needs a different core2_window1 and always uses beamforming. The BAR2 also has an offset (RAM start, presumably), so add that. Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Sven Peter <sven@svenpeter.dev> [sven: rebased, updated some comments, mentioned 4388 in Kconfig] Signed-off-by:
-
Ying Hsu authored
When HCI raw sockets are opened, the Bluetooth kernel module doesn't track CIS/BIS connections. User-space applications have to identify ISO data by maintaining connection information and look up the mapping for each ACL data packet received. Besides, btsnoop log captured in kernel couldn't tell ISO data from ACL data in this case. To avoid additional lookups, this patch introduces vendor-specific packet classification for Intel BT controllers to distinguish ISO data packets from ACL data packets. Signed-off-by:
Ying Hsu <yinghsu@chromium.org> Signed-off-by:
-
Dr. David Alan Gilbert authored
'iso_list_data' has been unused since the original commit ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type"). Remove it. Signed-off-by:
Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by:
-
Thorsten Blum authored
Remove memset(0) after dma_alloc_coherent(), which already zeroes out the memory, and fix the following two Coccinelle/coccicheck warnings reported by zalloc-simple.cocci: btintel_pcie.c:837:19-37: WARNING: dma_alloc_coherent used in /* Allocate full chunk of data buffer for DMA first and do indexing and * initialization next, so it can be freed easily */ rxq->buf_v_addr already zeroes out memory, so memset is not needed btintel_pcie.c:792:19-37: WARNING: dma_alloc_coherent used in /* Allocate full chunk of data buffer for DMA first and do indexing and * initialization next, so it can be freed easily */ txq->buf_v_addr already zeroes out memory, so memset is not needed Fixes: c2b636b3 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by:
-
Erick Archer authored
It is preferred to use sizeof(*pointer) instead of sizeof(type) due to the type of the variable can change and one needs not change the former (unlike the latter). This patch has no effect on runtime behavior. Signed-off-by:
Erick Archer <erick.archer@outlook.com> Signed-off-by:
-
Dan Carpenter authored
The "update" variable needs to be initialized to false. Fixes: 0ece498c ("Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
Dr. David Alan Gilbert authored
'hci_nokia_radio_hdr' looks like it was unused since it's initial commit. Signed-off-by:
-
Erick Archer authored
Refactor the list_for_each_entry() loop of rfcomm_get_dev_list() function to use array indexing instead of pointer arithmetic. This way, the code is more readable and idiomatic. Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Erick Archer authored
This is an effort to get rid of all multiplications from allocation functions in order to prevent integer overflows [1][2]. As the "dl" variable is a pointer to "struct rfcomm_dev_list_req" and this structure ends in a flexible array: struct rfcomm_dev_list_req { [...] struct rfcomm_dev_info dev_info[]; }; the preferred way in the kernel is to use the struct_size() helper to do the arithmetic instead of the calculation "size + count * size" in the kzalloc() and copy_to_user() functions. At the same time, prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). In this case, it is important to note that the logic needs a little refactoring to ensure that the "dev_num" member is initialized before the first access to the flex array. Specifically, add the assignment before the list_for_each_entry() loop. Also remove the "size" variable as it is no longer needed. This way, the code is more readable and safer. This code was detected with the help of Coccinelle, and audited and modified manually. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/160 [2] Reviewed-by: -
Erick Archer authored
Refactor the list_for_each_entry() loop of hci_get_dev_list() function to use array indexing instead of pointer arithmetic. This way, the code is more readable and idiomatic. Reviewed-by:
-
Erick Archer authored
This is an effort to get rid of all multiplications from allocation functions in order to prevent integer overflows [1][2]. As the "dl" variable is a pointer to "struct hci_dev_list_req" and this structure ends in a flexible array: struct hci_dev_list_req { [...] struct hci_dev_req dev_req[]; /* hci_dev_req structures */ }; the preferred way in the kernel is to use the struct_size() helper to do the arithmetic instead of the calculation "size + count * size" in the kzalloc() and copy_to_user() functions. At the same time, prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). In this case, it is important to note that the logic needs a little refactoring to ensure that the "dev_num" member is initialized before the first access to the flex array. Specifically, add the assignment before the list_for_each_entry() loop. Also remove the "size" variable as it is no longer needed. This way, the code is more readable and safer. This code was detected with the help of Coccinelle, and audited and modified manually. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/160 [2] Reviewed-by: -
Kiran K authored
Free irq before releasing irq vector. Fixes: c2b636b3 ("Bluetooth: btintel_pcie: Add support for PCIe transport") Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Kiran K authored
Firmware sequencer (FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ. Make 'btintel_print_fseq_info' public and use it in btintel_pcie.c. dmesg: .... [ 5335.695740] Bluetooth: hci0: Device booted in 33872 usecs [ 5335.695918] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291.ddc [ 5335.697011] Bluetooth: hci0: Applying Intel DDC parameters completed [ 5335.697837] Bluetooth: hci0: Firmware timestamp 2024.20 buildtype 0 build 62871 [ 5335.697848] Bluetooth: hci0: Firmware SHA1: 0xeffdce06 [ 5335.698655] Bluetooth: hci0: Fseq status: Success (0x00) [ 5335.698666] Bluetooth: hci0: Fseq executed: 00.00.04.176 [ 5335.698670] Bluetooth: hci0: Fseq BT Top: 00.00.04.176 [ 5335.750204] Bluetooth: MGMT ver 1.22 Signed-off-by:
-
Hao Qin authored
Add the support of MT7922 bluetooth subsystem reset that was called the auto revert to self-recover from the fatal error in the controller like the host encounters HCI cmd timeout or the controller crashes. Co-developed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Hao Qin <hao.qin@mediatek.com> Signed-off-by:
-
Hao Qin authored
Reset the controller before downloading the firmware to improve its reliability. This includes situations like cold or warm reboots, ensuring the controller is in its initial state before starting the firmware download. Co-developed-by:
Chris Lu <chris.lu@mediatek.com> Signed-off-by:
-
Hao Qin authored
Extract the function btusb_mtk_subsys_reset from the btusb_mtk_reset for the future handling of resetting bluetooth controller without the USB reset. Co-developed-by:
-
Sean Wang authored
Apply the common btmtk_fw_get_filename to avoid the similar coding in each driver. Signed-off-by:
-
Sean Wang authored
Include a shared function to get the firmware name, to prevent repeating code for similar chipsets. Signed-off-by:
-
Kiran K authored
Current flow iterates the ACPI table associated with Bluetooth controller looking for PPAG method. Method name can be directly passed to acpi_evaluate_object function instead of iterating the table. Fixes: c585a92b ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)") Signed-off-by:
-
Luke Wang authored
When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Signed-off-by:
Luke Wang <ziniu.wang_1@nxp.com> Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds a new flag BTNXPUART_FW_DOWNLOAD_ABORT which handles the situation where driver is removed while firmware download is in progress. logs: modprobe btnxpuart [65239.230431] Bluetooth: hci0: ChipID: 7601, Version: 0 [65239.236670] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se rmmod btnxpuart [65241.425300] Bluetooth: hci0: FW Download Aborted Signed-off-by:
Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by:
-
Neeraj Sanjay Kale authored
This enables prints for firmware download which can help automation tests to verify firmware download functionality. dmesg logs before: modprobe btnxpuart [ 1999.187264] Bluetooth: MGMT ver 1.22 dmesg logs with this patch: modprobe btnxpuart [16179.758515] Bluetooth: hci0: ChipID: 7601, Version: 0 [16179.764748] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [16181.217490] Bluetooth: hci0: FW Download Complete: 372696 bytes [16182.701398] Bluetooth: MGMT ver 1.22 Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by:
-
Hector Martin authored
BCM4388 takes over 2 seconds to boot, so increase the timeout. Signed-off-by:
-
Sven Peter authored
BCM4377_TIMEOUT is always used to wait for completitions and their API expects a timeout in jiffies instead of msecs. Fixes: 8a061276 ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Signed-off-by:
-
Luiz Augusto von Dentz authored
This makes MGMT_OP_LOAD_CONN_PARAM update existing connection by dectecting the request is just for one connection, parameters already exists and there is a connection. Since this is a new behavior the revision is also updated to enable userspace to detect it. Signed-off-by:
-
- 14 Jul, 2024 4 commits
-
-
Jakub Kicinski authored
Lorenzo Bianconi says: ==================== Introduce EN7581 ethernet support Add airoha_eth driver in order to introduce ethernet support for Airoha EN7581 SoC available on EN7581 development board. EN7581 mac controller is mainly composed by Frame Engine (FE) and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just basic functionalities are supported now) while QDMA is used for DMA operation and QOS functionalities between mac layer and the dsa switch (hw QoS is not available yet and it will be added in the future). Currently only hw lan features are available, hw wan will be added with subsequent patches. ==================== Link: https://patch.msgid.link/cover.1720818878.git.lorenzo@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lorenzo Bianconi authored
Add airoha_eth driver in order to introduce ethernet support for Airoha EN7581 SoC available on EN7581 development board (en7581-evb). EN7581 mac controller is mainly composed by the Frame Engine (PSE+PPE) and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just basic functionalities are currently supported) while QDMA is used for DMA operations and QOS functionalities between the mac layer and the external modules conncted to the FE GDM ports (e.g MT7530 DSA switch or external phys). A general overview of airoha_eth architecture is reported below: ┌───────┐ ┌───────┐ │ QDMA2 │ │ QDMA1 │ └───┬───┘ └───┬───┘ │ │ ┌───────▼─────────────────────────────────────────────▼────────┐ │ │ │ P5 P0 │ │ │ │ │ │ │ ┌──────┐ │ P3 ├────► GDM3 │ │ │ └──────┘ │ │ │ │ ┌─────┐ │ │ │ PPE ◄────┤ P4 PSE │ └─────┘ │ │ │ │ │ │ │ │ ┌──────┐ │ P9 ├────► GDM4 │ │ │ └──────┘ │ │ │ │ │ │ │ P2 P1 │ └─────────┬───────────────────────────────────────────┬────────┘ │ │ ┌───▼──┐ ┌──▼───┐ │ GDM2 │ │ GDM1 │ └──────┘ └──┬───┘ │ ┌────▼─────┐ │ MT7530 │ └──────────┘ Currently only hw LAN features (QDMA1+GDM1) are available while hw WAN (QDMA2+GDM{2,3,4}) ones will be added with subsequent patches introducing traffic offloading support. Tested-by:Benjamin Larsson <benjamin.larsson@genexis.eu> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/274945d2391c195098ab180a46d0617b18b9e42c.1720818878.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Introduce device-tree binding documentation for Airoha EN7581 ethernet mac controller. Reviewed-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: Switch API optimizations Marcin Szycik says: Optimize the process of creating a recipe in the switch block by removing duplicate switch ID words and changing how result indexes are fitted into recipes. In many cases this can decrease the number of recipes required to add a certain set of rules, potentially allowing a more varied set of rules to be created. Total rule count will also increase, since less words will be left unused/wasted. There are only 64 rules available in total, so every one counts. After this modification, many fields and some structs became unused or were simplified, resulting in overall simpler implementation. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Add tracepoint for adding and removing switch rules ice: Remove unused members from switch API ice: Optimize switch recipe creation ice: remove unused recipe bookkeeping data ice: Simplify bitmap setting in adding recipe ice: Remove reading all recipes before adding a new one ice: Remove unused struct ice_prot_lkup_ext members ==================== Link: https://patch.msgid.link/20240711181312.2019606-1-anthony.l.nguyen@intel.comSigned-off-by:
-
- 13 Jul, 2024 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-07-11 (net/intel) This series contains updates to most Intel network drivers. Tony removes MODULE_AUTHOR from drivers containing the entry. Simon Horman corrects a kdoc entry for i40e. Pawel adds implementation for devlink param "local_forwarding" on ice. Michal removes unneeded call, and code, for eswitch rebuild for ice. Sasha removed a no longer used field from igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Remove the internal 'eee_advert' field ice: remove eswitch rebuild ice: Add support for devlink local_forwarding param i40e: correct i40e_addr_to_hkey() name in kdoc net: intel: Remove MODULE_AUTHORs ==================== Link: https://patch.msgid.link/20240711201932.2019925-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Easwar Hariharan authored
I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave" with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/, fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists in the specification. Reviewed-by:
Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://patch.msgid.link/20240711052734.1273652-5-eahariha@linux.microsoft.comSigned-off-by:
-
Oleksij Rempel authored
This patch implements the TDR test procedure as described in "Application Note DP83TD510E Cable Diagnostics Toolkit revC", section 3.2. The procedure was tested with "draka 08 signalkabel 2x0.8mm". The reported cable length was 5 meters more for each 20 meters of actual cable length. For instance, a 20-meter cable showed as 25 meters, and a 40-meter cable showed as 50 meters. Since other parts of the diagnostics provided by this PHY (e.g., Active Link Cable Diagnostics) require accurate cable characterization to provide proper results, this tuning can be implemented in a separate patch/interface. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> changes v2: - add comments - change post silence time to 1000ms Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240712152848.2479912-1-o.rempel@pengutronix.deSigned-off-by:
-
Breno Leitao authored
Remove variables that are defined and incremented but never read. This issue appeared in network tests[1] as: drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c:38:6: warning: variable 'i' set but not used [-Wunused-but-set-variable] 38 | int i = 0; | ^ Link: https://netdev.bots.linux.dev/static/nipa/870263/13729811/build_clang/stderr [1] Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20240712134817.913756-1-leitao@debian.orgSigned-off-by:
-
