- 04 Oct, 2011 40 commits
-
-
Kukjin Kim authored
Conflicts: arch/arm/mach-exynos4/clock.c arch/arm/mach-s3c2412/gpio.c arch/arm/mach-s5p64x0/dma.c arch/arm/mach-s5p64x0/gpiolib.c
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Sachin Kamat authored
This patch adds definitions to enable support for s5p-fimc driver on SMDKV310 board. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Sachin Kamat authored
This patch adds header file protection macros to prevent duplication. Signed-off-by:
-
Jingoo Han authored
This patch is to support usb ehci device to the SMDKV310 board. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Heiko Stuebner authored
This clock is common to S3C2443/2416/2450. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Heiko Stuebner authored
This clock is special to the S3C2416/2450 SoCs. Signed-off-by:
-
Heiko Stuebner authored
It's the same clock for 2443/2416/2450. Signed-off-by:
-
Heiko Stuebner authored
S3C2416/S3C2450 use the same clocks for their i2s blocks and can therefore reuse the existing ones. Signed-off-by:
-
Ajay Kumar authored
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
-
Ajay Kumar authored
This patch: -- Adds platform device support for LCD-LTE480. -- Adds platform data for FB with win_mode and default_bpp. -- Enables FB device support and platform-lcd support. -- Adds SPCON settings for LCD. Signed-off-by:
-
Ajay Kumar authored
This patch adds GPIO lines settings(HSYNC, VSYNC, VCLK and VD) for LCD. Signed-off-by:
-
Ajay Kumar authored
Set s3c_device_fb name as "s5p64x0-fb" for S5P6440 and S5P6450. Signed-off-by:
-
Ajay Kumar authored
This patch adds: -- Framebuffer related register mappings and bit fields. -- IRQ number being used. Signed-off-by:
-
Hatim Ali authored
Add support for TVOUT on SMDKV310 board. Signed-off-by:
Hatim Ali <hatim.rv@samsung.com> Signed-off-by:
-
Mark Brown authored
Ever since it was written the Samsung DMA driver has had a TODO in the hw_free() function wondering if we need to flush the DMA buffers. Up until now the answer has been no but with the recent improvements Boojin has done to the DMA infrastructure for the Samsung port the answer has changed to yes for at least S3C6410 systems. If we don't then when we next prepare() the channel the API will get confused trying to run callbacks on the transfers hanging around from the previous time the stream was open and oops. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Boojin Kim <boojin.kim@samsung.com> Signed-off-by:
-
Jongpill Lee authored
Signed-off-by:
Jongpill Lee <boyko.lee@samsung.com> Signed-off-by:
-
Jongpill Lee authored
Signed-off-by:
-
Jongpill Lee authored
This patch modifies PMU register setting function to support the other EXYNOS4 SoCs. Signed-off-by:
-
Sylwester Nawrocki authored
Add voltage regulator definitions for M-5MOLS camera, platform data definition for the sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC and CSIS devices. Define required I2C0 bus timings. Setup camera port A GPIO. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Add platform data for CIF camera sensor and FIMC platform data entries for it. Add platform device for s5p-fimc media device driver and the camera port A I/O pins initialization. Signed-off-by:
-
Tomasz Stanislawski authored
This patch adds platform devices and regulators for TV devices on Samsung Goni board. Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Tomasz Stanislawski authored
This patch adds platform devices and regulators for TV devices on Samsung Universal C210 board. Signed-off-by:
-
Tomasz Stanislawski authored
This patch adds all the resources for TV drivers and devices for Samsung Exynos4 and S5PV210 platforms. Signed-off-by:
-
Tomasz Stanislawski authored
This patch adds hdmiphy dedicated i2c controller definitions. Signed-off-by:
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Kukjin Kim authored
-
Marek Szyprowski authored
Commit 1b39d5f2 introduced new common gpio driver for all Samsung GPIO SoCs. The new driver use wrong configuration setup for all gpio pins on S5PC100 and S5PV210 SoCs and external interrupt lines on Exynos4 SoCs. This patch fixes this issue. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Marek Szyprowski authored
Commit 1b39d5f2 introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't correctly register GPIO interrupts on Samsung Exynos4 SoCs. This is caused by a typo in define name. This patch fixes this issue. Signed-off-by:
-
Marek Szyprowski authored
Commit 1b39d5f2 introduced new common gpio driver for all Samsung GPIO SoCs. The new driver doesn't work correctly on Samsung Exynos4 SoC. It fails to set configuration for all but external interrupt pins. This patch fixes this issue. Signed-off-by:
-
Sachin Kamat authored
Signed-off-by:
-
Chanwoo Choi authored
This patch update config file of NURI board to enable RTC Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds platform definitions to enable s3c-fb driver. Framebuffer window with 1280x800x16bpp mode has been defined. Signed-off-by:
-
Marek Szyprowski authored
This patch adds platform definitions to enable s3c-fb driver. Framebuffer window with 480x800x16bpp mode has been defined. Signed-off-by:
-
Sachin Kamat authored
This patch adds hot plug detection(HPD) and power domain(PD) support for HDMI on ORIGEN board. Signed-off-by:
-
Tushar Behera authored
ORIGEN board is fitted with 7" LCD panel HV070WSA. The pixel resolution of the LCD panel is 1024x600. Also power domain device for LCD0 is registered. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Inderpal Singh authored
Configure MAX8997 PMIC and provide platform specific data for ORIGEN board. Signed-off-by:
Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by:
-
