- Pass struct vidtv_psi_pmt_write_args as a pointer;
- Avoid initializing structs multiple times.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Avoid initializing the structs multiple times and pass the
PAT struct as a pointer, instead of a var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

- Pass struct header_write_args as a pointer, instead of
  passing as a var;

- Initialize the psi_args struct only once.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This function initializes the psi_args twice, and receives
a struct, instead of a pointer to a struct.

Clean it up.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Cleanup the table_section_crc32_write_into() function
by initializing struct psi_write_args only once and by
passing the args as a pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The function vidtv_psi_ts_psi_write_into() initializes the
ts_header fields several times, and receives a struct
as argument, instead of using a pointer to struct.

Cleanup the function, in order to reduce its stack usage
and to avoid initializing the ts_header multiple times.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The current event is using an undefined date. Instead, it
should be the timestamp when the EIT table was generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The service_id there should be equal to the one used
on other tables, otherwise, EIT entries won't be valid.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As the service currently broadcasts just audio, change the
service type to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

On normal TS streams, the NIT table has its own entry at PAT,
but not at PMT.

While here, properly handle alloc problems when creating
PMT entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The EIT header ID field should not contain the network ID, but,
instead, the service_id of the program described at EIT.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As defined at ETSI TS 101 162, original network IDs up to 0xfebf
are reserved for registration at dvb.org.

Let's use, instead, an original network ID at the range
0xff00-0xffff, as this is for private temporary usage.

As the same value is also used for the network ID,
the range 0xff01-0xffff also fits better, as values
lower than that depend if the network is used for
satellite, terrestrial, cable of CI.

While here, move the TS ID to the bridge code, where it
is used, and change its value, as it was identical to
the value previously used by network ID. While we could
keep the same value, let's change it, just to make easier
to check for the new code while reading it with DVB tools
like dvbinspector.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Place some text at EIT data, and use ISO 8859-15 encoding for
the German letter "ü" (u mit umlat) letter.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Initialize the destination buffer/size and the initial
offset when creating the local var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Instead of first zeroing all fields at the mux structs and
then filling, do some initialization for the const data
when they're created.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, there's no need to access the length of some
tables. So, drop the unused functions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Do some cleanups at the coding style of the driver:
- remove "inline" declarations;
- use reverse xmas-tree for local var declarations;
- Adjust some indent to avoid breaking 80-cols;
- Cleanup some comments.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Minimize the number of data copies and initialization at
the code, passing them as pointers instead of duplicating
the data.

The only case where we're keeping the data copy is at
vidtv_pes_write_h(), as it needs a copy of the passed
arguments. On such case, we're being more explicit.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Initialize the fields of the arguments directly when
declaring it, and pass the args as a pointer, instead of
copying them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The sheet music used to generate the tones had a few
polyphonic notes. Due to that, its conversion to a
tones sequence had a few errors.

Also, due to a bug at the tone generator, it was missing
the pause at the initial compass.

Fix them.

While here, reduce the compass to 100bpm.

The music was converted from a Music XML file using
this small script:

<snip>
my $count = 0;
my $silent = 0;
my $note;
my $octave;
print "\t";
while (<>) {
	$note = $1 if (m,\<step\>(.*)\</step\>,);
	$octave = "_$1" if (m,\<octave\>(.*)\</octave\>,);
	if (m,\<alter\>1\</alter\>,) {
		$note .= "S";
		$sharp = 1;
	}
	if (m,\<rest/\>,) {
		$note = "SILENT";
		$silent = 1;
	}
	if (m,\<duration\>(.*)\</duration\>,) {
		printf "{ NOTE_${note}${octave}, %d},", $1 * 128 / 480;
		$count++;
		if ($silent || $count >= 3) {
			print "\n\t";
			$count = 0;
			$silent = 0;
		} else {
			print " ";
			print " " if (!$sharp);
		}
		$sharp = 0;
		$note = "";
		$octave = "";
	};
};
print "\n";
</snip>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The tone generator logic were repeating the song after the
first silent. There's also a wrong logic at the note
offset calculus, which may create some noise.

Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

While the original plan was to use the first movement of
the 5th Symphony, it was opted to use the Für Elise song,
instead.

Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The Linux stack is too short. So, using recursive functions
is a very bad idea. Convert those into non-recursive ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Currently, there are not checks if something gets bad during
memory allocation: it will simply use NULL pointers and
crash.

Add error path at the logic which allocates memory for the
MPEG-TS generator code, propagating the errors up to the
vidtv_bridge. Now, if something wents bad, start_streaming
will return an error that userspace can detect:

	ERROR    DMX_SET_PES_FILTER failed (PID = 0x2000): 12 Cannot allocate memory

and the driver doesn't crash.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

- Place the includes on alphabetical order;
- get rid of asm/byteorder.h;
- add bug.h at vidtv_s302m.c, as it is needed by
  inux/fixp-arith.h
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Some variables were only assigned once but were used in while
loops as if they had been updated at every iteration. Fix this.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

A few fields used only by the tone generator in the s302m encoder
are stored in struct vidtv_encoder. Move them into
struct vidtv_s302m_ctx instead. While we are at it: fix a
checkpatch warning for long lines.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The code to append a descriptor to the end of a chain is repeated
throughout the psi generator code. Extract it into its own helper
function to avoid cluttering.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Implement an Event Information Table (EIT) as per EN 300 468
5.2.4.

The EIT provides information in chronological order regarding
the events contained within each service.

For now only present event information is supported.

[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a Network Information Table (NIT) as specified in ETSI EN 300 468.

This table conveys information relating to the physical organization of
the multiplexes carried via a given network and the characteristics of
the network itself.

It is conveyed in the output of vidtv as packets with TS PID of 0x0010

[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The same constant (0xffffffff) is used in three different functions.

Extract it into a #define to avoid repetition.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

After initial kernel module load during kernel boot and removing
the module and try to load it again an Unable to handle kernel
paging request is observed:

Unable to handle kernel paging request at virtual address ffffa44f7416eae0
 Mem abort info:
   ESR = 0x96000047
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
 Data abort info:
   ISV = 0, ISS = 0x00000047
   CM = 0, WnR = 1
 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000008147c000
 [ffffa44f7416eae0] pgd=000000017df9f003, p4d=000000017df9f003,
 pud=000000017df9e003, pmd=000000017df9b003, pte=0000000000000000
 Internal error: Oops: 96000047 [#1] PREEMPT SMP
 Modules linked in: venus_core(+) snd_soc_wsa881x regmap_sdw af_alg
  snd_soc_wcd934x soundwire_qcom gpio_wcd934x q6asm_dai q6routing
  q6adm q6afe_dai snd_soc_hdmi_codec q6afe q6asm q6dsp_common q6cor
  display_connector rmtfs_mem drm ip_tables x_tables ipv6
  [last unloaded: venus_core]
 CPU: 6 PID: 889 Comm: modprobe Tainted: G        W      5.10.0-rc1+ #8
 Hardware name: Thundercomm Dragonboard 845c (DT)
 pstate: 80400085 (Nzcv daIf +PAN -UAO -TCO BTYPE=--)
 pc : queued_spin_lock_slowpath+0x1dc/0x3c8
 lr : do_raw_spin_lock+0xc0/0x118
 sp : ffff8000142cb7b0
 x29: ffff8000142cb7b0 x28: 0000000000000013
 x27: ffffa44f72de5690 x26: 0000000000000003
 x25: ffff17c2d00f8080 x24: ffff17c2c0d78010
 x23: ffff17c2c0d4f700 x22: ffff17c2d00f8080
 x21: 0000000000000000 x20: ffffa44f74148000
 x19: ffff17c2c0d4f8f8 x18: 0000000000000000
 x17: 0000000000000000 x16: ffffa44f7342f158
 x15: 0000000000000040 x14: ffffa44f746e8320
 x13: 0000000000000228 x12: 0000000000000020
 x11: 0000000000000000 x10: 00000000001c0000
 x9 : 0000000000000000 x8 : ffff17c33d746ac0
 x7 : ffff17c2c109b000 x6 : ffffa44f7416eac0
 x5 : ffff17c33d746ac0 x4 : 0000000000000000
 x3 : ffff17c2c0d4f8f8 x2 : ffffa44f7416eae0
 x1 : ffffa44f7416eae0 x0 : ffff17c33d746ac8
 Call trace:
  queued_spin_lock_slowpath+0x1dc/0x3c8
  do_raw_spin_lock+0xc0/0x118
  _raw_spin_lock_irqsave+0x80/0x14c
  __pm_runtime_resume+0x38/0xb8
  device_link_add+0x3b8/0x5d0
  core_get_v4+0x268/0x2d8 [venus_core]
  venus_probe+0x108/0x458 [venus_core]
  platform_drv_probe+0x54/0xa8
  really_probe+0xe4/0x3b0
  driver_probe_device+0x58/0xb8
  device_driver_attach+0x74/0x80
  __driver_attach+0x58/0xe8
  bus_for_each_dev+0x70/0xc0
  driver_attach+0x24/0x30
  bus_add_driver+0x150/0x1f8
  driver_register+0x64/0x120
  __platform_driver_register+0x48/0x58
  qcom_venus_driver_init+0x20/0x1000 [venus_core]
  do_one_initcall+0x84/0x458
  do_init_module+0x58/0x208
  load_module+0x1ec0/0x26a8
  __do_sys_finit_module+0xb8/0xf8
  __arm64_sys_finit_module+0x20/0x30
  el0_svc_common.constprop.0+0x7c/0x1c0
  do_el0_svc+0x24/0x90
  el0_sync_handler+0x180/0x188
  el0_sync+0x174/0x180
 Code: 91002100 8b0200c2 f861d884 aa0203e1 (f8246828)
 ---[ end trace f1f687c15fd6b2ca ]---
 note: modprobe[889] exited with preempt_count 1

After revisit the OPP part of the code I found that OPP pmdomain
is detached with direct call to dev_pm_domain_detach instead of
OPP wraper for detaching pmdomains with OPP table. Correct this
by calling the OPP dev_pm_opp_detach_genpd.

Fixes: 9a538b83 ('media: venus: core: Add support for opp tables/perf voting')
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The profile and level in op_set_ctrl was recently changed but during
v4l2_ctrl_handler_setup profile and level control values are mangled.

Fixes: 435c53c3 ("media: venus: venc: Use helper to set profile and level")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

If scaling matrix control is present, VPU should not use default matrix.
Fix that.

Fixes: b3a23db0 ("media: cedrus: Use H264_SCALING_MATRIX only when required")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix build warnings when CONFIG_PM is not set/enabled:

../drivers/media/platform/marvell-ccic/mmp-driver.c:324:12: warning: 'mmpcam_runtime_suspend' defined but not used [-Wunused-function]
  324 | static int mmpcam_runtime_suspend(struct device *dev)
../drivers/media/platform/marvell-ccic/mmp-driver.c:310:12: warning: 'mmpcam_runtime_resume' defined but not used [-Wunused-function]
  310 | static int mmpcam_runtime_resume(struct device *dev)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The addition of MT8183 support added a dependency on the SCP remoteproc
module. However the initial patch used the "select" Kconfig directive,
which may result in the SCP module to not be compiled if remoteproc was
disabled. In such a case, mtk-vcodec would try to link against
non-existent SCP symbols. "select" was clearly misused here as explained
in kconfig-language.txt.

Replace this by a "depends" directive on at least one of the VPU and
SCP modules, to allow the driver to be compiled as long as one of these
is enabled, and adapt the code to support this new scenario.

Also adapt the Kconfig text to explain the extra requirements for MT8173
and MT8183.
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: bf1d556a ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

mtk-vcodec supports two kinds of firmware, VPU and SCP. Both were
supported from the same source files, but this is clearly unclean and
makes it more difficult to disable support for one or the other.

Move these implementations into their own file, after adding the
necessary private interfaces.

[hverkuil: smatch fix: mtk_vcodec_fw_vpu_init() error: uninitialized symbol 'rst_id'.]
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: bf1d556a ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Pull x86 fixes from Thomas Gleixner:
 "Three fixes all related to #DB:

   - Handle the BTF bit correctly so it doesn't get lost due to a kernel
     #DB

   - Only clear and set the virtual DR6 value used by ptrace on user
     space triggered #DB. A kernel #DB must leave it alone to ensure
     data consistency for ptrace.

   - Make the bitmasking of the virtual DR6 storage correct so it does
     not lose DR_STEP"

* tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6)
  x86/debug: Only clear/set ->virtual_dr6 for userspace #DB
  x86/debug: Fix BTF handling

Pull timer fixes from Thomas Gleixner:
 "A few fixes for timers/timekeeping:

   - Prevent undefined behaviour in the timespec64_to_ns() conversion
     which is used for converting user supplied time input to
     nanoseconds. It lacked overflow protection.

   - Mark sched_clock_read_begin/retry() to prevent recursion in the
     tracer

   - Remove unused debug functions in the hrtimer and timerlist code"

* tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Prevent undefined behaviour in timespec64_to_ns()
  timers: Remove unused inline funtion debug_timer_free()
  hrtimer: Remove unused inline function debug_hrtimer_free()
  time/sched_clock: Mark sched_clock_read_begin/retry() as notrace