Pages belonging to a page_pool (PP) instance must be freed through the
PP APIs in-order to correctly release any DMA mappings and release
refcnt on the DMA device when freeing PP instance. When PP release a
page (page_pool_release_page) the page->pp_magic value is cleared.

This patch detect a leaked PP page in free_page_is_bad() via
unexpected state of page->pp_magic value being PP_SIGNATURE.

We choose to report and treat it as a bad page. It would be possible
to release the page via returning it to the PP instance as the
page->pp pointer is likely still valid.

Notice this code is only activated when either compiled with
CONFIG_DEBUG_VM or boot cmdline debug_pagealloc=on, and
CONFIG_PAGE_POOL.

Reduced example output of leak with PP_SIGNATURE = dead000000000040:

 BUG: Bad page state in process swapper/4  pfn:141fa6
 page:000000006dbf8062 refcount:0 mapcount:0 mapping:0000000000000000 index:0x141fa6000 pfn:0x141fa6
 flags: 0x2fffff80000000(node=0|zone=2|lastcpupid=0x1fffff)
 page_type: 0xffffffff()
 raw: 002fffff80000000 dead000000000040 ffff88814888a000 0000000000000000
 raw: 0000000141fa6000 0000000000000001 00000000ffffffff 0000000000000000
 page dumped because: page_pool leak
 [...]
 Call Trace:
  <IRQ>
  dump_stack_lvl+0x32/0x50
  bad_page+0x70/0xf0
  free_unref_page_prepare+0x263/0x430
  free_unref_page+0x34/0x130
  mlx5e_free_rx_mpwqe+0x190/0x1c0 [mlx5_core]
  mlx5e_post_rx_mpwqes+0x1ac/0x280 [mlx5_core]
  mlx5e_napi_poll+0x12b/0x710 [mlx5_core]
  ? skb_free_head+0x4f/0x90
  __napi_poll+0x2b/0x1c0
  net_rx_action+0x27b/0x360

The advantage is the Call Trace directly points to the function
leaking the PP page, which in this case is an on purpose bug
introduced into the mlx5 driver to test this code change.

Currently PP will periodically in page_pool_release_retry()
printk warning "stalled pool shutdown" which cannot be directly
corrolated to leaking and might as well be a false positive
due to SKBs being stuck on a socket for an extended period.
After this patch we should be able to remove this printk.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

I accidentally removed the error checking after issuing the reset.
Restore it.

Fixes: f257c73e ("mlxsw: pci: Add support for new reset flow")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

RollBall SFP modules allow the access to PHY registers only after a
certain time has passed. Until then, the registers read 0xffff.

Currently we have quirks for modules where we need to wait either 25
seconds or 4 seconds, but recently I got hands on another module where
the wait is even shorter.

Instead of hardcoding different wait times, lets rework the code:
- increase the PHY retry count to 25
- when RollBall module is detected, increase the PHY retry time from
  50ms to 1s
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kory says:

====================
This patch was initially submitted as part of a net patch series.
Conor expressed interest in using it in a different subsystem.
https://lore.kernel.org/netdev/20231116-feature_poe-v1-7-be48044bf249@bootlin.com/

Consequently, I extracted it from the series and submitted it separately.
I first tried to send it to driver-core but it seems also not the best
choice:
https://lore.kernel.org/lkml/2023111720-slicer-exes-7d9f@gregkh/
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No error code are available to signal an invalid firmware content.
Drivers that can check the firmware content validity can not return this
specific failure to the user-space

Expand the firmware error code with an additional code:
- "firmware invalid" code which can be used when the provided firmware
  is invalid

Sync lib/test_firmware.c file accordingly.
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231122-feature_firmware_error_code-v3-1-04ec753afb71@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This check can never be true for a firmware file with a correct format.
Existing checks in rtl_fw_data_ok() are sufficient, no problems with
invalid firmware files are known.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The enum name used for id-to-str table does not handle
the enum-name override in the spec correctly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a new family is ever added with a dash in the name
the C codegen will break. Make sure we use the "safe"
form of the name consistently.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As suggested by Paolo in link[1], if the memory allocation fails, the mm
layer will emit a lot warning comprising the backtrace, so remove the
print.

[1] https://lore.kernel.org/all/20231118081653.1481260-1-shaozhengchao@huawei.com/Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit dcd2cf5f ("net/smc: add autocorking support") adds an
atomic variable tx_pushing in smc_connection to make sure only one can
send to let it cork more and save CDC slot. since smc_tx_pending can be
called in the soft IRQ without checking sock_owned_by_user() at that
time, which would cause a race condition because bh_lock_sock() did
not honor sock_lock()

After commit 6b88af83 ("net/smc: don't send in the BH context if
sock_owned_by_user"), the transmission is deferred to when sock_lock()
is held by the user. Therefore, we no longer need tx_pending to hold
message.

So remove atomic variable tx_pushing and its operation, and
smc_tx_sndbuf_nonempty becomes a wrapper of __smc_tx_sndbuf_nonempty,
so rename __smc_tx_sndbuf_nonempty back to smc_tx_sndbuf_nonempty
Suggested-by: Alexandra Winter <wintera@linux.ibm.com>
Co-developed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>

diff v4: remove atomic variable tx_pushing
diff v3: improvements in the commit body and comments
diff v2: fix a typo in commit body and add net-next subject-prefix

 net/smc/smc.h    |  1 -
 net/smc/smc_tx.c | 30 +-----------------------------
 2 files changed, 1 insertion(+), 30 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

32bit builds generate the following warning when we use a u32-max
in range validation:

  warning: decimal constant 4294967295 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here

The range values are u64, slap ULL/LL on all of them just
to avoid such noise.

There's currently no code using full range validation, but
it will matter in the upcoming page-pool introspection.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: add IPA v5.5 support

This series adds IPA support for the Qualcomm SM8550 SoC, which uses
IPA v5.5.

The first patch adds a new compatible string for the SM8550.  The
second cleans up "ipa_reg.h" a bit for consistency.  The third patch
adds definitions and some minor code changes related to IPA v5.5.
The fourth defines IPA register offsets and fields used for IPA
v5.0; most--but not all--register definitions are the same as used
in IPA v5.0.  The final patch adds configuration data used for IPA
v5.5 (here again this mostly duplicates IPA v5.0 definitions).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the configuration data required for IPA v5.5, which is used in
the Qualcomm SM8550 SoC.  With that, the driver supports IPA v5.5.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

GSI register definitions for IPA v5.5 are the same as those used for
IPA v5.0.

Update ipa_reg_id_valid() to reflect that IPA v5.0+ supports source
and destination resource groups 4 through 7.

Add the definitions of IPA register offsets and fields for IPA v5.5.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For IPA v5.5+, the QTIME_TIMESTAMP_CFG register no longer defines
two fields in the DPL timestamp.  Make the code referencing those
fields in ipa_qtime_config() conditional based on IPA version.

IPA v5.0+ supports the IPA_MEM_AP_V4_FILTER and IPA_MEM_AP_V6_FILTER
memory regions.  Update ipa_mem_id_valid() to reflect that.

IPA v5.5 no longer supports a few register fields, adds some others,
and removes support for a few IPA interrupt types.  Update
"ipa_reg.h" to include information about IPA v5.5.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some definitions in "ipa_reg.h" are only valid for certain versions
of IPA.  In such cases a comment indicates a version or range of
versions where the definition is (or is not) valid.  Almost all such
cases look like "IPA vX.Y", but a few don't include the "IPA" tag.

Update these so they all consistently include "IPA".  And replace
a few lines that talk about "the next bit" in the definition of the
ipa_irq_id enumerated type with a more concise comment using the
"IPA vX.Y" convention.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for SM8550, which uses IPA v5.5.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Shinas Rasheed says:

====================
Get max rx packet length and solve

Patchsets which resolve observed style issues in control net
source files, and also implements get mtu control net api
to fetch max mtu value from firmware

Changes:
V2:
  - Introduced a patch to resolve style issues as mentioned in V1
  - Removed OCTEP_MAX_MTU macro, as it is redundant.

V1: https://lore.kernel.org/all/20231121191224.2489474-1-srasheed@marvell.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Max receive packet length can vary across SoCs, so
this needs to be queried from respective firmware and
filled by driver. A control net get mtu api should be
implemented to do the same.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Solve observed style issues for kernel documentation
and structure declarations in control net API definitions.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangguan Wang says:

===================
add two sysctl for SMC-R v2.1

This patch set add two sysctl for SMC-R v2.1:
net.smc.smcr_max_links_per_lgr is used to control the max links
per lgr.
net.smc.smcr_max_conns_per_lgr is used to control the max connections
per lgr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new sysctl: net.smc.smcr_max_conns_per_lgr, which is
used to control the preferred max connections per lgr for
SMC-R v2.1. The default value of this sysctl is 255, and
the acceptable value ranges from 16 to 255.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new sysctl: net.smc.smcr_max_links_per_lgr, which is
used to control the preferred max links per lgr for SMC-R
v2.1. The default value of this sysctl is 2, and the acceptable
value ranges from 1 to 2.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds tc offload support for matching on ICMP type and code.

Example usage:
To enable adding tc ingress rules
        tc qdisc add dev eth0 ingress

TC rule drop the ICMP echo reply:
        tc filter add dev eth0 protocol ip parent ffff: \
        flower ip_proto icmp type 8 code 0 skip_sw action drop

TC rule to drop ICMPv6 echo reply:
        tc filter add dev eth0 protocol ipv6 parent ffff: flower \
        indev eth0 ip_proto icmpv6 type 128 code 0 action drop
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduced by commit 6e2d85ec ("net: phy: Stop with excessive soft
reset").

soft_reset call for phy_init_hw had multiple revision across the years
and the implementation goes back to 2014. Originally was a simple call
to write the generic PHY reset BIT, it was then moved to a dedicated
function. It was then added the option for PHY driver to define their
own special way to reset the PHY. Till this change, checking for ret was
correct as it was always filled by either the generic reset or the
custom implementation. This changed tho with commit 6e2d85ec ("net:
phy: Stop with excessive soft reset"), as the generic reset call to PHY
was dropped but the ret check was never made entirely optional and
dependent whether soft_reset was defined for the PHY driver or not.

Luckly nothing was ever added before the soft_reset call so the ret
check (in the case where a PHY didn't had soft_reset defined) although
wrong, never caused problems as ret was init 0 at the start of
phy_init_hw.

To prevent any kind of problem and to make the function cleaner and more
robust, correctly move the ret check if the soft_reset section making it
optional and needed only with the function defined.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a simple script that parses the Netlink YAML spec files
(Documentation/netlink/specs/), and generates RST files to be rendered
in the Network -> Netlink Specification documentation page.

Create a python script that is invoked during 'make htmldocs', reads the
YAML specs input file and generate the correspondent RST file.

Create a new Documentation/networking/netlink_spec index page, and
reference each Netlink RST file that was processed above in this main
index.rst file.

In case of any exception during the parsing, dump the error and skip
the file.

Do not regenerate the RST files if the input files (YAML) were not
changed in-between invocations.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>

----
Changelog:

V3:
	* Do not regenerate the RST files if the input files were not
	  changed. In order to do it, a few things changed:
	  - Rely on Makefile more to find what changed, and trigger
	    individual file processing
	  - The script parses file by file now (instead of batches)
	  - Create a new option to generate the index file

V2:
	* Moved the logic from a sphinx extension to a external script
	* Adjust some formatting as suggested by Donald Hunter and Jakub
	* Auto generating all the rsts instead of having stubs
	* Handling error gracefully
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/intel/ice/ice_main.c
  c9663f79 ("ice: adjust switchdev rebuild path")
  77580179 ("ice: restore timestamp configuration after device reset")
https://lore.kernel.org/all/20231121211259.3348630-1-anthony.l.nguyen@intel.com/

Adjacent changes:

kernel/bpf/verifier.c
  bb124da6 ("bpf: keep track of max number of bpf_loop callback iterations")
  5f99f312 ("bpf: add register bounds sanity checks and sanitization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf.

  Current release - regressions:

   - Revert "net: r8169: Disable multicast filter for RTL8168H and
     RTL8107E"

   - kselftest: rtnetlink: fix ip route command typo

  Current release - new code bugs:

   - s390/ism: make sure ism driver implies smc protocol in kconfig

   - two build fixes for tools/net

  Previous releases - regressions:

   - rxrpc: couple of ACK/PING/RTT handling fixes

  Previous releases - always broken:

   - bpf: verify bpf_loop() callbacks as if they are called unknown
     number of times

   - improve stability of auto-bonding with Hyper-V

   - account BPF-neigh-redirected traffic in interface statistics

  Misc:

   - net: fill in some more MODULE_DESCRIPTION()s"

* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  tools: ynl: fix duplicate op name in devlink
  tools: ynl: fix header path for nfsd
  net: ipa: fix one GSI register field width
  tls: fix NULL deref on tls_sw_splice_eof() with empty record
  net: axienet: Fix check for partial TX checksum
  vsock/test: fix SEQPACKET message bounds test
  i40e: Fix adding unsupported cloud filters
  ice: restore timestamp configuration after device reset
  ice: unify logic for programming PFINT_TSYN_MSK
  ice: remove ptp_tx ring parameter flag
  amd-xgbe: propagate the correct speed and duplex status
  amd-xgbe: handle the corner-case during tx completion
  amd-xgbe: handle corner-case during sfp hotplug
  net: veth: fix ethtool stats reporting
  octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
  net: usb: qmi_wwan: claim interface 4 for ZTE MF290
  Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
  net/smc: avoid data corruption caused by decline
  nfc: virtual_ncidev: Add variable to check if ndev is running
  dpll: Fix potential msg memleak when genlmsg_put_reply failed
  ...

We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:

devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
   19 |         [DEVLINK_CMD_PORT_NEW] = "port-new",
      |                                  ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)

Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.

Fixes: f2f9dd16 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The makefile dependency is trying to include the wrong header:

<command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory

The guard also looks wrong.

Fixes: f14122b2 ("tools: ynl: Add source files for nfsd netlink protocol")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register
is 24 bits (not 20 bits) starting with IPA v5.0.  Fix this.

Fixes: faf0678e ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.

It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().

Fixes: df720d28 ("tls/sw: Use splice_eof() to flush")
Cc: stable@vger.kernel.org
Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Due to a typo, the code checked the RX checksum feature in the TX path.

Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.

Fixes: 5c338112 ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.

Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.

Fixes: e284fc28 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
ice: restore timestamp config after reset

Jake Keller says:

We recently discovered during internal validation that the ice driver has
not been properly restoring Tx timestamp configuration after a device reset,
which resulted in application failures after a device reset.

After some digging, it turned out this problem is two-fold. Since the
introduction of the PTP support the driver has been clobbering the storage
of the current timestamp configuration during reset. Thus after a reset, the
driver will no longer perform Tx or Rx timestamps, and will report
timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued.

In addition, the recently merged auxiliary bus support code missed that
PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices.
Failure to restore this register configuration results in the driver no
longer responding to interrupts from other ports. Depending on the traffic
pattern, this can either result in increased latency responding to
timestamps on the non-owner ports, or it can result in the driver never
reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done
during initialization. Due to this, the Tx timestamp issue persists even if
userspace reconfigures timestamping.

This series fixes both issues, as well as removes a redundant Tx ring field
since we can rely on the skb flag as the primary detector for a Tx timestamp
request.

Note that I don't think this series will directly apply to older stable
releases (even v6.6) as we recently refactored a lot of the PTP code to
support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus
implementation. The principle of patch 1/3 and 3/3 could apply as far back
as the initial PTP support, but I don't think it will apply cleanly as-is.
====================

Link: https://lore.kernel.org/r/20231121211259.3348630-1-anthony.l.nguyen@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.

This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.

This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.

Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.

Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:

1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
   timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()

2) ice_ptp_restore_timestamp_mode() which calls
   ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
   calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
   issues an immediate TSYN_TX interrupt to ensure that timestamps which
   may have occurred during the device reset get processed.

Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.

This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.

With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.

Fixes: 77a78115 ("ice: enable receive hardware timestamping")
Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit d938a8cc ("ice: Auxbus devices & driver for E822 TS") modified
how Tx timestamps are handled for E822 devices. On these devices, only the
clock owner handles reading the Tx timestamp data from firmware. To do
this, the PFINT_TSYN_MSK register is modified from the default value to one
which enables reacting to a Tx timestamp on all PHY ports.

The driver currently programs PFINT_TSYN_MSK in different places depending
on whether the port is the clock owner or not. For the clock owner, the
PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before
calling ice_ptp_tx_ena_intr to program the PHY ports.

For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during
ice_ptp_init_port.

If a large enough device reset occurs, the PFINT_TSYN_MSK register will be
reset to the default value in which only the PHY associated directly with
the PF will cause the Tx timestamp interrupt to trigger.

The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a
device reset. For the E822 device, this results in the PF no longer
responding to interrupts for other ports. This results in failure to
deliver Tx timestamps to user space applications.

Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify
the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place.
This function will program both registers according to the combination of
user configuration and device requirements.

This ensures that PFINT_TSYN_MSK is always restored when we configure the
Tx timestamp interrupt.

Fixes: d938a8cc ("ice: Auxbus devices & driver for E822 TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx
ring variable to see if timestamping is enabled on that ring. This value is
set for all rings whenever userspace configures Tx timestamping.

Ostensibly this was done to avoid wasting cycles checking other fields when
timestamping has not been enabled. However, for Tx timestamps we already
get an individual per-SKB flag indicating whether userspace wants to
request a timestamp on that packet. We do not gain much by also having
a separate flag to check for whether timestamping was enabled.

In fact, the driver currently fails to restore the field after a PF reset.
Because of this, if a PF reset occurs, timestamps will be disabled.

Since this flag doesn't add value in the hotpath, remove it and always
provide a timestamp if the SKB flag has been set.

A following change will fix the reset path to properly restore user
timestamping configuration completely.

This went unnoticed for some time because one of the most common
applications using Tx timestamps, ptp4l, will reconfigure the socket as
part of its fault recovery logic.

Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Raju Rangoju says:

====================
amd-xgbe: fixes to handle corner-cases

This series include bug fixes to amd-xgbe driver.
====================

Link: https://lore.kernel.org/r/20231121191435.4049995-1-Raju.Rangoju@amd.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>