'err' is set in err path, but it's not returned to callers.
Don't always return -EINPROGRESS, return err.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/crypto/marvell/hash.c: In function 'mv_cesa_ahash_pad_req':
drivers/crypto/marvell/hash.c:138:15: warning: variable 'index' set but not used [-Wunused-but-set-variable]

It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use kmemdup rather than duplicating its implementation
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cacheline_aligned is a special section. It cannot be const at the same
time because it's not read-only. It doesn't give any MMU protection.

Mark it ____cacheline_aligned to not place it in a special section,
but just align it in .rodata

Cc: herbert@gondor.apana.org.au
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Two per-CPU variables are allocated as pointer to per-CPU memory which
then are used as scratch buffers.
We could be smart about this and use instead a per-CPU struct which
contains the pointers already and then we need to allocate just the
scratch buffers.
Add a lock to the struct. By doing so we can avoid the get_cpu()
statement and gain lockdep coverage (if enabled) to ensure that the lock
is always acquired in the right context. On non-preemptible kernels the
lock vanishes.
It is okay to use raw_cpu_ptr() in order to get a pointer to the struct
since it is protected by the spinlock.

The diffstat of this is negative and according to size scompress.o:
   text    data     bss     dec     hex filename
   1847     160      24    2031     7ef dbg_before.o
   1754     232       4    1990     7c6 dbg_after.o
   1799      64      24    1887     75f no_dbg-before.o
   1703      88       4    1795     703 no_dbg-after.o

The overall size increase difference is also negative. The increase in
the data section is only four bytes without lockdep.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If scomp_acomp_comp_decomp() fails to allocate memory for the
destination then we never copy back the data we compressed.
It is probably best to return an error code instead 0 in case of
failure.
I haven't found any user that is using acomp_request_set_params()
without the `dst' buffer so there is probably no harm.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The current definition and implementation of the SEV_GET_ID command
does not provide the length of the unique ID returned by the firmware.
As per the firmware specification, the firmware may return an ID
length that is not restricted to 64 bytes as assumed by the SEV_GET_ID
command.

Introduce the SEV_GET_ID2 command to overcome with the SEV_GET_ID
limitations. Deprecate the SEV_GET_ID in the favor of SEV_GET_ID2.

At the same time update SEV API web link.

Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Nathaniel McCallum <npmccallum@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

create_caam_req_fq() doesn't return NULL pointers so there is no need to
check.  The NULL checks are problematic because it's hard to say how a
NULL return should be handled, so removing the checks is a nice cleanup.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Added rfc4106(gcm(aes)) cipher.
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some i.MX6 devices (imx6D, imx6Q, imx6DL, imx6S, imx6DP and imx6DQ) have
an issue wherein AXI bus transactions may not occur in the correct order.
This isn't a problem running single descriptors, but can be if running
multiple concurrent descriptors. Reworking the CAAM driver to throttle
to single requests is impractical, so this patch limits the AXI pipeline
to a depth of one (from a default of 4) to preclude this situation from
occurring.
This patch applies to known affected platforms.
Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In caam_jr_enqueue(), a write barrier is needed to order stores to job
ring slot before declaring addition of new job into input job ring.
The register write is done using wr_reg32() which internally uses
iowrite32() for write operation. The api iowrite32() issues a write
barrier before issuing write operation. Therefore, the wmb() preceding
wr_reg32() can be safely removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For each job ring, the variable 'ringsize' is initialised but never
used. Similarly variables 'inp_ring_write_index' and 'head' always track
the same value and instead of 'inp_ring_write_index', caam_jr_enqueue()
can use 'head' itself. Both these variables have been removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For each job ring pair, the output ring is processed exactly by one cpu
at a time under a tasklet context (one per ring). Therefore, there is no
need to protect a job ring's access & its private data structure using a
lock. Hence the lock can be removed.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix sparse warnings:

drivers/crypto/vmx/vmx.c:44:12: warning:
 symbol 'p8_init' was not declared. Should it be static?
drivers/crypto/vmx/vmx.c:70:13: warning:
 symbol 'p8_exit' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes: ccb778e1 ("crypto: api - Add fips_enable flag")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix sparse warning:

drivers/crypto/cavium/cpt/cptvf_main.c:644:6:
 warning: symbol 'cptvf_device_init' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It's never used since introduction in commit
9d12ba86 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix following sparse warnings:

drivers/crypto/cavium/zip/zip_crypto.c:72:5: warning: symbol 'zip_ctx_init' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:110:6: warning: symbol 'zip_ctx_exit' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:122:5: warning: symbol 'zip_compress' was not declared. Should it be static?
drivers/crypto/cavium/zip/zip_crypto.c:158:5: warning: symbol 'zip_decompress' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix sparse warning:

drivers/crypto/ccp/ccp-crypto-rsa.c:251:5:
 warning: symbol 'ccp_register_rsa_alg' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix sparse warnings:

drivers/crypto/cavium/cpt/cptvf_reqmanager.c:226:5: warning: symbol 'send_cpt_command' was not declared. Should it be static?
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:273:6: warning: symbol 'do_request_cleanup' was not declared. Should it be static?
drivers/crypto/cavium/cpt/cptvf_reqmanager.c:319:6: warning: symbol 'do_post_process' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

cptvf_mbox_send_ack and cptvf_mbox_send_nack are never
used since introdution in commit c694b233 ("crypto: cavium
- Add the Virtual Function driver for CPT")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Spotted while reviewind patches from Eric Biggers.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In salsa20_docrypt(), use crypto_xor_cpy() instead of crypto_xor().
This avoids having to memcpy() the src buffer to the dst buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In chacha_docrypt(), use crypto_xor_cpy() instead of crypto_xor().
This avoids having to memcpy() the src buffer to the dst buffer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The original assembly imported from OpenSSL has two copy-paste
errors in handling CTR mode. When dealing with a 2 or 3 block tail,
the code branches to the CBC decryption exit path, rather than to
the CTR exit path.

This leads to corruption of the IV, which leads to subsequent blocks
being corrupted.

This can be detected with libkcapi test suite, which is available at
https://github.com/smuellerDD/libkcapiReported-by: Ondrej Mosnáček <omosnacek@gmail.com>
Fixes: 5c380d62 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Building with clang for a 32-bit architecture runs over the stack
frame limit in the setkey function:

drivers/crypto/ccree/cc_cipher.c:318:12: error: stack frame size of 1152 bytes in function 'cc_cipher_setkey' [-Werror,-Wframe-larger-than=]

The problem is that there are two large variables: the temporary
'tmp' array and the SHASH_DESC_ON_STACK() declaration. Moving
the first into the block in which it is used reduces the
total frame size to 768 bytes, which seems more reasonable
and is under the warning limit.

Fixes: 63ee04c8 ("crypto: ccree - add skcipher support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-By: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

All crypto API algorithms are supposed to support the case where they
are called in a context where SIMD instructions are unusable, e.g. IRQ
context on some architectures.  However, this isn't tested for by the
self-tests, causing bugs to go undetected.

Now that all algorithms have been converted to use crypto_simd_usable(),
update the self-tests to test the no-SIMD case.  First, a bool
testvec_config::nosimd is added.  When set, the crypto operation is
executed with preemption disabled and with crypto_simd_usable() mocked
out to return false on the current CPU.

A bool test_sg_division::nosimd is also added.  For hash algorithms it's
honored by the corresponding ->update().  By setting just a subset of
these bools, the case where some ->update()s are done in SIMD context
and some are done in no-SIMD context is also tested.

These bools are then randomly set by generate_random_testvec_config().

For now, all no-SIMD testing is limited to the extra crypto self-tests,
because it might be a bit too invasive for the regular self-tests.
But this could be changed later.

This has already found bugs in the arm64 AES-GCM and ChaCha algorithms.
This would have found some past bugs as well.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace all calls to may_use_simd() in the shared SIMD helpers with
crypto_simd_usable(), in order to allow testing the no-SIMD code paths.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace all calls to may_use_simd() in the arm64 crypto code with
crypto_simd_usable(), in order to allow testing the no-SIMD code paths.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace all calls to may_use_simd() in the arm crypto code with
crypto_simd_usable(), in order to allow testing the no-SIMD code paths.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace all calls to irq_fpu_usable() in the x86 crypto code with
crypto_simd_usable(), in order to allow testing the no-SIMD code paths.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

So that the no-SIMD fallback code can be tested by the crypto
self-tests, add a macro crypto_simd_usable() which wraps may_use_simd(),
but also returns false if the crypto self-tests have set a per-CPU bool
to disable SIMD in crypto code on the current CPU.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The arm64 gcm-aes-ce algorithm is failing the extra crypto self-tests
following my patches to test the !may_use_simd() code paths, which
previously were untested.  The problem is that in the !may_use_simd()
case, an odd number of AES blocks can be processed within each step of
the skcipher_walk.  However, the skcipher_walk is being done with a
"stride" of 2 blocks and is advanced by an even number of blocks after
each step.  This causes the encryption to produce the wrong ciphertext
and authentication tag, and causes the decryption to incorrectly fail.

Fix it by only processing an even number of blocks per step.

Fixes: c2b24c36 ("crypto: arm64/aes-gcm-ce - fix scatterwalk API violation")
Fixes: 71e52c27 ("crypto: arm64/aes-ce-gcm - operate on two input blocks at a time")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The arm64 implementations of ChaCha and XChaCha are failing the extra
crypto self-tests following my patches to test the !may_use_simd() code
paths, which previously were untested.  The problem is as follows:

When !may_use_simd(), the arm64 NEON implementations fall back to the
generic implementation, which uses the skcipher_walk API to iterate
through the src/dst scatterlists.  Due to how the skcipher_walk API
works, walk.stride is set from the skcipher_alg actually being used,
which in this case is the arm64 NEON algorithm.  Thus walk.stride is
5*CHACHA_BLOCK_SIZE, not CHACHA_BLOCK_SIZE.

This unnecessarily large stride shouldn't cause an actual problem.
However, the generic implementation computes round_down(nbytes,
walk.stride).  round_down() assumes the round amount is a power of 2,
which 5*CHACHA_BLOCK_SIZE is not, so it gives the wrong result.

This causes the following case in skcipher_walk_done() to be hit,
causing a WARN() and failing the encryption operation:

	if (WARN_ON(err)) {
		/* unexpected case; didn't process all bytes */
		err = -EINVAL;
		goto finish;
	}

Fix it by rounding down to CHACHA_BLOCK_SIZE instead of walk.stride.

(Or we could replace round_down() with rounddown(), but that would add a
slow division operation every time, which I think we should avoid.)

Fixes: 2fe55987 ("crypto: arm64/chacha - use combined SIMD/ALU routine for more speed")
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Newer combinations of the glibc, kernel and openssh can result in long initial
startup times on OMAP devices:

[    6.671425] systemd-rc-once[102]: Creating ED25519 key; this may take some time ...
[  142.652491] systemd-rc-once[102]: Creating ED25519 key; done.

due to the blocking getrandom(2) system call:

[  142.610335] random: crng init done

Set the quality level for the omap hwrng driver allowing the kernel to use the
hwrng as an entropy source at boot.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all AEAD algorithms (that I have the hardware to test, at
least) have been fixed to not modify the user-provided aead_request,
remove the workaround from testmgr that reset aead_request::tfm after
each AEAD encryption/decryption.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 implementations of MORUS-1280 to use the AEAD SIMD
helpers, rather than hand-rolling the same functionality.  This
simplifies the code and also fixes the bug where the user-provided
aead_request is modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 implementation of MORUS-640 to use the AEAD SIMD
helpers, rather than hand-rolling the same functionality.  This
simplifies the code and also fixes the bug where the user-provided
aead_request is modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 implementation of AEGIS-256 to use the AEAD SIMD
helpers, rather than hand-rolling the same functionality.  This
simplifies the code and also fixes the bug where the user-provided
aead_request is modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 implementation of AEGIS-128L to use the AEAD SIMD
helpers, rather than hand-rolling the same functionality.  This
simplifies the code and also fixes the bug where the user-provided
aead_request is modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>