On systems where a ccw based console device is used a lockdep false alarm
could be triggered when a device driver calls printk while holding a
subchannels lock (e.g. in it's irq handler). Since this is valid behavior
fix this by introducing a separate lock class for the console subchannels
lock.

The lockdep warning was revealed by "printk: enable interrupts before calling
console_trylock_for_printk()" which changed console_unlock() to be called with
lockdep enabled.

[ INFO: possible recursive locking detected ]
3.15.0-rc5-next-20140520 #1 Not tainted
---------------------------------------------
ccwgroup/2239 is trying to acquire lock:
(&(sch->lock)->rlock){-.-...}, at: [<0000000000642a52>] raw3215_write+0x52/0x200

but task is already holding lock:
(&(sch->lock)->rlock){-.-...}, at: [<00000000005fd160>] do_cio_interrupt+0x60/0x108

other info that might help us debug this:
Possible unsafe locking scenario:

CPU0
----
lock(&(sch->lock)->rlock);
lock(&(sch->lock)->rlock);

*** DEADLOCK ***

May be due to missing lock nesting notation

8 locks held by ccwgroup/2239:

stack backtrace:
CPU: 3 PID: 2239 Comm: ccwgroup Not tainted 3.15.0-rc5-next-20140520 #1
0000000036fab518 0000000036fab528 0000000000000002 0000000000000000
0000000036fab5b8 0000000036fab530 0000000036fab530 00000000001116e8
0000000000000000 0000000000986ec4 00000000009701b6 000000000000000b
0000000036fab578 0000000036fab518 0000000000000000 0000000000000000
0000000000000000 00000000001116e8 0000000036fab518 0000000036fab578
Call Trace:
([<0000000000111626>] show_trace+0x14e/0x158)
[<000000000011169a>] show_stack+0x6a/0xe8
[<00000000007c6e72>] dump_stack+0x82/0xb0
[<00000000001a95f2>] validate_chain.isra.37+0xa4a/0xbb0
[<00000000001acaca>] __lock_acquire+0x4da/0xcd0
[<00000000001ada1a>] lock_acquire+0xba/0x218
[<00000000007cd634>] _raw_spin_lock_irqsave+0x6c/0xb8
[<0000000000642a52>] raw3215_write+0x52/0x200
[<0000000000643d16>] con3215_write+0x76/0xf8
[<00000000001bd87a>] call_console_drivers.constprop.25+0xfa/0x210
[<00000000001be0b0>] console_unlock+0x3e0/0x4e8
[<00000000001be450>] vprintk_emit+0x298/0x6e0
[<00000000005aa210>] dev_vprintk_emit+0xe0/0x1a8
[<00000000005aa320>] dev_printk_emit+0x48/0x50
[<00000000005aa390>] __dev_printk+0x68/0xb0
[<00000000005aa7c2>] _dev_info+0x62/0x70
[<0000000000657bf0>] qeth_l2_send_setmac_cb+0xd0/0x190
[<0000000000651a1e>] qeth_send_control_data_cb+0x3a6/0x6a8
[<0000000000655546>] qeth_irq+0x1a6/0xac0
[<000000000060a0ac>] ccw_device_call_handler+0xa4/0xc0
[<0000000000608b62>] ccw_device_irq+0x5a/0x190
[<00000000005fd1ca>] do_cio_interrupt+0xca/0x108
[<00000000001c0a2e>] handle_irq_event_percpu+0x5e/0x378
[<00000000001c46fc>] handle_percpu_irq+0x6c/0x98
[<00000000001c0066>] generic_handle_irq+0x46/0x68
[<000000000010b5b6>] do_IRQ+0x5e/0x88
[<00000000007cf304>] io_call+0x6/0x20
[<000000000064c63a>] qeth_send_control_data+0x322/0x570
([<000000000064c50e>] qeth_send_control_data+0x1f6/0x570)
[<0000000000651db2>] qeth_send_ipa_cmd+0x92/0x120
[<000000000065b310>] __qeth_l2_set_online+0x170/0xaa8
[<000000000060ebb6>] ccwgroup_set_online+0x56/0x90
[<000000000060ef96>] ccwgroup_online_store+0xd6/0xe0
[<000000000033d11a>] kernfs_fop_write+0x10a/0x188
[<00000000002bbd00>] vfs_write+0x98/0x1c0
[<00000000002bc8a0>] SyS_write+0x60/0xd0
[<00000000007cee3a>] sysc_nr_ok+0x22/0x28
[<000003fffd0c3f28>] 0x3fffd0c3f28
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch fixes a problem introduced with git commit beef560b
"s390/uaccess: simplify control register updates".

The switch_mm function is not called if the next process is a kernel
thread without an attached mm or is a nop if the mm does not change.
But CR1 still needs to be loaded with the kernel ASCE in case the
code returns to a uaccess function that uses the secondary space mode.

In addition move the set_fs call from finish_arch_switch to
finish_arch_post_lock_switch and then remove finish_arch_switch.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Change the visibility of the module parameters ap_domain_index and
ap_thread_flag for the owner and the members of the owners group in
sysfs.

Previously the parameters where invisible due to a value of zero
as permissions parameter in the module_param_named macro.
Signed-off-by: Michael Veigel <veigel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, there is no special interesting feature, but we've
  investigated a couple of tuning points with respect to the I/O flow.
  Several major bug fixes and a bunch of clean-ups also have been made.

  This patch-set includes the following major enhancement patches:
   - enhance wait_on_page_writeback
   - support SEEK_DATA and SEEK_HOLE
   - enhance readahead flows
   - enhance IO flushes
   - support fiemap
   - add some tracepoints

  The other bug fixes are as follows:
   - fix to support a large volume > 2TB correctly
   - recovery bug fix wrt fallocated space
   - fix recursive lock on xattr operations
   - fix some cases on the remount flow

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
  f2fs: support f2fs_fiemap
  f2fs: avoid not to call remove_dirty_inode
  f2fs: recover fallocated space
  f2fs: fix to recover data written by dio
  f2fs: large volume support
  f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages
  f2fs: avoid overflow when large directory feathure is enabled
  f2fs: fix recursive lock by f2fs_setxattr
  MAINTAINERS: add a co-maintainer from samsung for F2FS
  MAINTAINERS: change the email address for f2fs
  f2fs: use inode_init_owner() to simplify codes
  f2fs: avoid to use slab memory in f2fs_issue_flush for efficiency
  f2fs: add a tracepoint for f2fs_read_data_page
  f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
  f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
  f2fs: add a tracepoint for f2fs_write_end
  f2fs: add a tracepoint for f2fs_write_begin
  f2fs: fix checkpatch warning
  f2fs: deactivate inode page if the inode is evicted
  f2fs: decrease the lock granularity during write_begin
  ...

Pull CIFS fixes from Steve French.

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix memory leaks in SMB2_open
  cifs: ensure that vol->username is not NULL before running strlen on it
  Clarify SMB2/SMB3 create context and add missing ones
  Do not send ClientGUID on SMB2.02 dialect
  cifs: Set client guid on per connection basis
  fs/cifs/netmisc.c: convert printk to pr_foo()
  fs/cifs/cifs.c: replace seq_printf by seq_puts
  Update cifs version number to 2.03
  fs: cifs: new helper: file_inode(file)
  cifs: fix potential races in cifs_revalidate_mapping
  cifs: new helper function: cifs_revalidate_mapping
  cifs: convert booleans in cifsInodeInfo to a flags field
  cifs: fix cifs_uniqueid_to_ino_t not to ever return 0

Pull SCSI updates from James Bottomley:
 "This patch consists of the usual driver updates (qla2xxx, qla4xxx,
  lpfc, be2iscsi, fnic, ufs, NCR5380) The NCR5380 is the addition to
  maintained status of a long neglected driver for older hardware.  In
  addition there are a lot of minor fixes and cleanups and some more
  updates to make scsi mq ready"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (130 commits)
  include/scsi/osd_protocol.h: remove unnecessary __constant
  mvsas: Recognise device/subsystem 9485/9485 as 88SE9485
  Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed"
  mptfusion: fix msgContext in mptctl_hp_hostinfo
  acornscsi: remove linked command support
  scsi/NCR5380: dprintk macro
  fusion: Remove use of DEF_SCSI_QCMD
  fusion: Add free msg frames to the head, not tail of list
  mpt2sas: Add free smids to the head, not tail of list
  mpt2sas: Remove use of DEF_SCSI_QCMD
  mpt2sas: Remove uses of serial_number
  mpt3sas: Remove use of DEF_SCSI_QCMD
  mpt3sas: Remove uses of serial_number
  qla2xxx: Use kmemdup instead of kmalloc + memcpy
  qla4xxx: Use kmemdup instead of kmalloc + memcpy
  qla2xxx: fix incorrect debug printk
  be2iscsi: Bump the driver version
  be2iscsi: Fix processing cqe for cxn whose endpoint is freed
  be2iscsi: Fix destroy MCC-CQ before MCC-EQ is destroyed
  be2iscsi: Fix memory corruption in MBX path
  ...

Pull input updates from Dmitry Torokhov:
 "A big update to the Atmel touchscreen driver, devm support for polled
  input devices, several drivers have been converted to using managed
  resources, and assorted driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: synaptics - fix resolution for manually provided min/max
  Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_version
  Input: max8997_haptic - add error handling for regulator and pwm
  Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set
  Input: elantech - deal with clickpads reporting right button events
  Input: edt-ft5x06 - fix an i2c write for M09 support
  Input: omap-keypad - remove platform data support
  ARM: OMAP2+: remove unused omap4-keypad file and code
  Input: ab8500-ponkey - switch to using managed resources
  Input: max8925_onkey - switch to using managed resources
  Input: 88pm860x-ts - switch to using managed resources
  Input: 88pm860x_onkey - switch to using managed resources
  Input: intel-mid-touch - switch to using managed resources
  Input: wacom - process outbound for newer Cintiqs
  Input: wacom - set stylus_in_proximity when pen is in range
  DTS: ARM: OMAP3-N900: Add tsc2005 support
  Input: tsc2005 - add DT support
  Input: add common DT binding for touchscreens
  Input: jornada680_kbd - switch top using managed resources
  Input: adp5520-keys - switch to using managed resources
  ...

Pull OMAP DT fbdev updates from Tomi Valkeinen:
 "Here are display related device tree data changes for OMAP.  They are
  based on an already merged branch to satisfy the dependencies for the
  dts file changes.

  Add OMAP DT data:
   - omap5 display subsystem
   - display data for omap5 uEVM board
   - am43xx display subsystem
   - display data for am43xx ePOS and GP boards (LCD only)
   - display data for GTA04 board
   - display data for overo board
   - display data for duovero-parlor board
   - display data for omap3 evm and ldp boards"

* tag 'fbdev-omap-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  ARM: omap5.dtsi: Add audio related parameters to hdmi node
  ARM: omap4.dtsi: Add audio related parametes to hdmi node
  ARM: dts: duovero-parlor: Add HDMI output
  ARM: dts: overo: Add support for 3.5'' LCD output
  ARM: dts: overo: Add support for 4.3'' LCD output
  ARM: dts: overo: Add support for DVI output
  ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp
  ARM: dts: omap3-gta04: Add display support
  ARM: dts: omap5-uevm.dts: add display nodes
  ARM: dts: omap5-uevm.dts: add tca6424a
  ARM: dts: omap5.dtsi: add DSS nodes
  ARM: dts: am43x-epos-evm: add LCD data
  ARM: dts: am437x-gp-evm: add LCD data
  ARM: dts: am4372.dtsi: add DSS information

Pull MIPS updates from Ralf Baechle:
 - three fixes for 3.15 that didn't make it in time
 - limited Octeon 3 support.
 - paravirtualization support
 - improvment to platform support for Netlogix SOCs.
 - add support for powering down the Malta eval board in software
 - add many instructions to the in-kernel microassembler.
 - add support for the BPF JIT.
 - minor cleanups of the BCM47xx code.
 - large cleanup of math emu code resulting in significant code size
   reduction, better readability of the code and more accurate
   emulation.
 - improvments to the MIPS CPS code.
 - support C3 power status for the R4k count/compare clock device.
 - improvments to the GIO support for older SGI workstations.
 - increase number of supported CPUs to 256; this can be reached on
   certain embedded multithreaded ccNUMA configurations.
 - various small cleanups, updates and fixes

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits)
  MIPS: IP22/IP28: Improve GIO support
  MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX
  DEC: Document the R4k MB ASIC mini interrupt controller
  DEC: Add self as the maintainer
  MIPS: Add microMIPS MSA support.
  MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents.
  MIPS: Replace obsolete strict_strto call with kstrto
  MIPS: BFP: Simplify code slightly.
  MIPS: Call find_vma with the mmap_sem held
  MIPS: Fix 'write_msa_##' inline macro.
  MIPS: Fix MSA toolchain support detection.
  mips: Update the email address of Geert Uytterhoeven
  MIPS: Add minimal defconfig for mips_paravirt
  MIPS: Enable build for new system 'paravirt'
  MIPS: paravirt: Add pci controller for virtio
  MIPS: Add code for new system 'paravirt'
  MIPS: Add functions for hypervisor call
  MIPS: OCTEON: Add OCTEON3 to __get_cpu_type
  MIPS: Add function get_ebase_cpunum
  MIPS: Add minimal support for OCTEON3 to c-r4k.c
  ...

Pull ARC updates from Vineet Gupta:
 "Nothing too exciting here, just minor fixes/cleanup.  Only noteworthy
  ones are:

   - Moving cache disabling to early boot
   - ARC UART enabled only if earlyprintk setup in cmdline"

* tag 'arc-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: Disable caches in early boot if so configured
  ARC: [arcfpga] Early ARC UART to be only activated by cmdline
  ARC: [arcfpga] Get rid of legacy BVCI latency unit support
  ARC: remove duplicate header exports
  ARC: arc_local_timer_setup() need not pass own cpu id
  ARC: Fixed spelling errors within comments
  ARC: make start_thread() out-of-line
  ARC: fix mmuv2 warning
  ARC: [SMP] ISS SMP extension bitrot

Pull tracing updates from Steven Rostedt:
 "Lots of tweaks, small fixes, optimizations, and some helper functions
  to help out the rest of the kernel to ease their use of trace events.

  The big change for this release is the allowing of other tracers, such
  as the latency tracers, to be used in the trace instances and allow
  for function or function graph tracing to be in the top level
  simultaneously"

* tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix memory leak on instance deletion
  tracing: Fix leak of ring buffer data when new instances creation fails
  tracing/kprobes: Avoid self tests if tracing is disabled on boot up
  tracing: Return error if ftrace_trace_arrays list is empty
  tracing: Only calculate stats of tracepoint benchmarks for 2^32 times
  tracing: Convert stddev into u64 in tracepoint benchmark
  tracing: Introduce saved_cmdlines_size file
  tracing: Add __get_dynamic_array_len() macro for trace events
  tracing: Remove unused variable in trace_benchmark
  tracing: Eliminate double free on failure of allocation on boot up
  ftrace/x86: Call text_ip_addr() instead of the duplicated code
  tracing: Print max callstack on stacktrace bug
  tracing: Move locking of trace_cmdline_lock into start/stop seq calls
  tracing: Try again for saved cmdline if failed due to locking
  tracing: Have saved_cmdlines use the seq_read infrastructure
  tracing: Add tracepoint benchmark tracepoint
  tracing: Print nasty banner when trace_printk() is in use
  tracing: Add funcgraph_tail option to print function name after closing braces
  tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
  tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks
  ...

Pull cgroup updates from Tejun Heo:
 "A lot of activities on cgroup side.  Heavy restructuring including
  locking simplification took place to improve the code base and enable
  implementation of the unified hierarchy, which currently exists behind
  a __DEVEL__ mount option.  The core support is mostly complete but
  individual controllers need further work.  To explain the design and
  rationales of the the unified hierarchy

        Documentation/cgroups/unified-hierarchy.txt

  is added.

  Another notable change is css (cgroup_subsys_state - what each
  controller uses to identify and interact with a cgroup) iteration
  update.  This is part of continuing updates on css object lifetime and
  visibility.  cgroup started with reference count draining on removal
  way back and is now reaching a point where csses behave and are
  iterated like normal refcnted objects albeit with some complexities to
  allow distinguishing the state where they're being deleted.  The css
  iteration update isn't taken advantage of yet but is planned to be
  used to simplify memcg significantly"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (77 commits)
  cgroup: disallow disabled controllers on the default hierarchy
  cgroup: don't destroy the default root
  cgroup: disallow debug controller on the default hierarchy
  cgroup: clean up MAINTAINERS entries
  cgroup: implement css_tryget()
  device_cgroup: use css_has_online_children() instead of has_children()
  cgroup: convert cgroup_has_live_children() into css_has_online_children()
  cgroup: use CSS_ONLINE instead of CGRP_DEAD
  cgroup: iterate cgroup_subsys_states directly
  cgroup: introduce CSS_RELEASED and reduce css iteration fallback window
  cgroup: move cgroup->serial_nr into cgroup_subsys_state
  cgroup: link all cgroup_subsys_states in their sibling lists
  cgroup: move cgroup->sibling and ->children into cgroup_subsys_state
  cgroup: remove cgroup->parent
  device_cgroup: remove direct access to cgroup->children
  memcg: update memcg_has_children() to use css_next_child()
  memcg: remove tasks/children test from mem_cgroup_force_empty()
  cgroup: remove css_parent()
  cgroup: skip refcnting on normal root csses and cgrp_dfl_root self css
  cgroup: use cgroup->self.refcnt for cgroup refcnting
  ...

Pull libata updates from Tejun Heo:
 "Nothing too interesting - another ahci platform driver variant,
  additional controller support, minor fixes and cleanups"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Add Device ID for HighPoint RocketRaid 642L
  ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
  ahci: add PCI ID for Marvell 88SE91A0 SATA Controller
  sata_fsl: remove check for CONFIG_MPC8315_DS
  ahci: add support for Hisilicon sata
  libahci_platform: add host_flags parameter in ahci_platform_init_host()
  ata: ahci: append new hflag AHCI_HFLAG_NO_FBS
  ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
  ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
  Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
  libata-sff: remove dead code
  ata: SATL compliance for Inquiry Product Revision
  pata_octeon_cf: use devm_kzalloc() to allocate cf_port

Pull workqueue updates from Tejun Heo:
 "Lai simplified worker destruction path and internal workqueue locking
  and there are some other minor changes.

  Except for the removal of some long-deprecated interfaces which
  haven't had any in-kernel user for quite a while, there shouldn't be
  any difference to workqueue users"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  kernel/workqueue.c: pr_warning/pr_warn & printk/pr_info
  workqueue: remove the confusing POOL_FREEZING
  workqueue: rename first_worker() to first_idle_worker()
  workqueue: remove unused work_clear_pending()
  workqueue: remove unused WORK_CPU_END
  workqueue: declare system_highpri_wq
  workqueue: use generic attach/detach routine for rescuers
  workqueue: separate pool-attaching code out from create_worker()
  workqueue: rename manager_mutex to attach_mutex
  workqueue: narrow the protection range of manager_mutex
  workqueue: convert worker_idr to worker_ida
  workqueue: separate iteration role from worker_idr
  workqueue: destroy worker directly in the idle timeout handler
  workqueue: async worker destruction
  workqueue: destroy_worker() should destroy idle workers only
  workqueue: use manager lock only to protect worker_idr
  workqueue: Remove deprecated system_nrt[_freezable]_wq
  workqueue: Remove deprecated flush[_delayed]_work_sync()
  kernel/workqueue.c: pr_warning/pr_warn & printk/pr_info
  workqueue: simplify wq_update_unbound_numa() by jumping to use_dfl_pwq if the target cpumask equals wq's

Pull percpu updates from Tejun Heo:
 "Nothing too exciting.  percpu_ref is going through some interface
  changes and getting new features with more changes in the pipeline but
  given its young age and few users, it's very low impact"

* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu-refcount: implement percpu_ref_tryget()
  percpu-refcount: rename percpu_ref_tryget() to percpu_ref_tryget_live()
  percpu: Replace __get_cpu_var with this_cpu_ptr

Merge tag 'for-linus-3.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs

Pull 9p fixes from Eric Van Hensbergen:
 "Two bug fixes, one in xattr error path and the other in parsing
  major/minor numbers from devices"

* tag 'for-linus-3.16-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9P: fix return value in v9fs_fid_xattr_set
  fs/9p: adjust sscanf parameters accordingly to the variable types

This function is supposed to return true if the new load imbalance is
worse than the old one.  It didn't.  I can only hope brown paper bags
are in style.

Now things converge much better on both the 4 node and 8 node systems.

I am not sure why this did not seem to impact specjbb performance on the
4 node system, which is the system I have full-time access to.

This bug was introduced recently, with commit e63da036 ("sched/numa:
Allow task switch if load imbalance improves")
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shrink_inactive_list() used to wait 0.1s to avoid congestion when all
the pages that were isolated from the inactive list were dirty but not
under active writeback.  That makes no real sense, and apparently causes
major interactivity issues under some loads since 3.11.

The ostensible reason for it was to wait for kswapd to start writing
pages, but that seems questionable as well, since the congestion wait
code seems to trigger for kswapd itself as well.  Also, the logic behind
delaying anything when we haven't actually started writeback is not
clear - it only delays actually starting that writeback.

We'll still trigger the congestion waiting if

 (a) the process is kswapd, and we hit pages flagged for immediate
     reclaim

 (b) the process is not kswapd, and the zone backing dev writeback is
     actually congested.

This probably needs to be revisited, but as it is this fixes a reported
regression.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Pinpointed-by: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ext4 updates from Ted Ts'o:
 "Clean ups and miscellaneous bug fixes, in particular for the new
  collapse_range and zero_range fallocate functions.  In addition,
  improve the scalability of adding and remove inodes from the orphan
  list"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: handle symlink properly with inline_data
  ext4: fix wrong assert in ext4_mb_normalize_request()
  ext4: fix zeroing of page during writeback
  ext4: remove unused local variable "stored" from ext4_readdir(...)
  ext4: fix ZERO_RANGE test failure in data journalling
  ext4: reduce contention on s_orphan_lock
  ext4: use sbi in ext4_orphan_{add|del}()
  ext4: use EXT_MAX_BLOCKS in ext4_es_can_be_merged()
  ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
  ext4: remove unnecessary double parentheses
  ext4: do not destroy ext4_groupinfo_caches if ext4_mb_init() fails
  ext4: make local functions static
  ext4: fix block bitmap validation when bigalloc, ^flex_bg
  ext4: fix block bitmap initialization under sparse_super2
  ext4: find the group descriptors on a 1k-block bigalloc,meta_bg filesystem
  ext4: avoid unneeded lookup when xattr name is invalid
  ext4: fix data integrity sync in ordered mode
  ext4: remove obsoleted check
  ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode
  ext4: fix locking for O_APPEND writes
  ...

Pull LLVM patches from Behan Webster:
 "Next set of patches to support compiling the kernel with clang.
  They've been soaking in linux-next since the last merge window.

  More still in the works for the next merge window..."

* tag 'llvmlinux-for-v3.16' of git://git.linuxfoundation.org/llvmlinux/kernel:
  arm, unwind, LLVMLinux: Enable clang to be used for unwinding the stack
  ARM: LLVMLinux: Change "extern inline" to "static inline" in glue-cache.h
  all: LLVMLinux: Change DWARF flag to support gcc and clang
  net: netfilter: LLVMLinux: vlais-netfilter
  crypto: LLVMLinux: aligned-attribute.patch

Pull x86 vdso build fix from Peter Anvin:
 "This fixes building the vdso code on older Linux systems, and probably
  some non-Linux systems"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso: Use <tools/le_byteshift.h> for littleendian access

Now that 3.15 is released, this merges the 'next' branch into 'master',
bringing us to the normal situation where my 'master' branch is the
merge window.

* accumulated work in next: (6809 commits)
  ufs: sb mutex merge + mutex_destroy
  powerpc: update comments for generic idle conversion
  cris: update comments for generic idle conversion
  idle: remove cpu_idle() forward declarations
  nbd: zero from and len fields in NBD_CMD_DISCONNECT.
  mm: convert some level-less printks to pr_*
  MAINTAINERS: adi-buildroot-devel is moderated
  MAINTAINERS: add linux-api for review of API/ABI changes
  mm/kmemleak-test.c: use pr_fmt for logging
  fs/dlm/debug_fs.c: replace seq_printf by seq_puts
  fs/dlm/lockspace.c: convert simple_str to kstr
  fs/dlm/config.c: convert simple_str to kstr
  mm: mark remap_file_pages() syscall as deprecated
  mm: memcontrol: remove unnecessary memcg argument from soft limit functions
  mm: memcontrol: clean up memcg zoneinfo lookup
  mm/memblock.c: call kmemleak directly from memblock_(alloc|free)
  mm/mempool.c: update the kmemleak stack trace for mempool allocations
  lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations
  mm: introduce kmemleak_update_trace()
  mm/kmemleak.c: use %u to print ->checksum
  ...

This reverts commit 3e1a878b.

It came in very late, and already has one reported failure: Sitsofe
reports that the current tree fails to boot on his EeePC, and bisected
it down to this.  Rather than waste time trying to figure out what's
wrong, just revert it.
Reported-by: Sitsofe Wheeler <sitsofe@gmail.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prepare input updates for 3.16.

commit 421e08c4 fixed the reported min/max for the X and Y axis,
but unfortunately, it broke the resolution of those same axis.

On the t540p, the resolution is the same regarding X and Y. It is not
a problem for xf86-input-synaptics because this driver is only interested
in the ratio between X and Y.
Unfortunately, xf86-input-cmt uses directly the resolution, and having a
null resolution leads to some divide by 0 errors, which are translated by
-infinity in the resulting coordinates.
Reported-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The patch e57a66aa: "Input: atmel_mxt_ts - read and report
bootloader version" from May 18, 2014, leads to the following static
checker warning:

	drivers/input/touchscreen/atmel_mxt_ts.c:437 mxt_get_bootloader_version()
	warn: signedness bug returning '(-5)'

drivers/input/touchscreen/atmel_mxt_ts.c
   429  static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
   430  {
   431          struct device *dev = &data->client->dev;
   432          u8 buf[3];
   433
   434          if (val & MXT_BOOT_EXTENDED_ID) {
   435                  if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
   436                          dev_err(dev, "%s: i2c failure\n", __func__);
   437                          return -EIO;
                                       ^^^^
This gets truncated into a number from 0-255 and anyway the caller
doesn't check for errors.

(reported by Dan Carpenter)
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's start checking return value of regulator_enable and pwm_enable to
avoid errors. Fixes the following warning:

drivers/input/misc/max8997_haptic.c:185:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The touchpad on the GIGABYTE U2442 not only stops communicating when we try
to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS
versions also when we set bit 1 (enable two finger mode auto correct).

I've asked the original reporter of:
https://bugzilla.kernel.org/show_bug.cgi?id=61151

To check that not setting bit 1 does not lead to any adverse effects on his
model / BIOS revision, and it does not, so this commit fixes the touchpad
not working on these versions by simply never setting bit 1 for laptop
models with the no_hw_res quirk.
Reported-and-tested-by: James Lademann <jwlademann@gmail.com>
Tested-by: Philipp Wolfer <ph.wolfer@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

At least the Dell Vostro 5470 elantech *clickpad* reports right button
clicks when clicked in the right bottom area:

https://bugzilla.redhat.com/show_bug.cgi?id=1103528

This is different from how (elantech) clickpads normally operate, normally
no matter where the user clicks on the pad the pad always reports a left
button event, since there is only 1 hardware button beneath the path.

It looks like Dell has put 2 buttons under the pad, one under each bottom
corner, causing this.

Since this however still clearly is a real clickpad hardware-wise, we still
want to report it as such to userspace, so that things like finger movement
in the bottom area can be properly ignored as it should be on clickpads.

So deal with this weirdness by simply mapping a right click to a left click
on elantech clickpads. As an added advantage this is something which we can
simply do on all elantech clickpads, so no need to add special quirks for
this weird model.
Reported-and-tested-by: Elder Marco <eldermarco@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver sends 3 bytes instead of 2 when accessing a register on the M09
firmware, so writing to gain seems to overflow into the offset register.
Signed-off-by: Robert Woerle <robert@linuxdevelopment.de>
Acked-By: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull clock framework updates from Mike Turquette:
 "The clock framework changes for 3.16 are pretty typical: mostly clock
  driver additions and fixes.  There are additions to the clock core
  code for some of the basic types (e.g. the common divider type has
  some fixes and featured added to it).

  One minor annoyance is a last-minute dependency that wasn't handled
  quite right.  Commit ba0fae3b ("clk: berlin: add core clock driver
  for BG2/BG2CD") in this pull request depends on
  include/dt-bindings/clock/berlin2.h, which is already in your tree via
  the arm-soc pull request.  Building for the berlin platform will break
  when the clk tree is built on it's own, but merged into your master
  branch everything should be fine"

* tag 'clk-for-linus-3.16' of git://git.linaro.org/people/mike.turquette/linux: (75 commits)
  mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
  clk: export __clk_round_rate for providers
  clk: versatile: free icst on error return
  clk: qcom: Return error pointers for unimplemented clocks
  clk: qcom: Support msm8974pro global clock control hardware
  clk: qcom: Properly support display clocks on msm8974
  clk: qcom: Support display RCG clocks
  clk: qcom: Return highest rate when round_rate() exceeds plan
  clk: qcom: Fix mmcc-8974's PLL configurations
  clk: qcom: Fix clk_rcg2_is_enabled() check
  clk: berlin: add core clock driver for BG2Q
  clk: berlin: add core clock driver for BG2/BG2CD
  clk: berlin: add driver for BG2x complex divider cells
  clk: berlin: add driver for BG2x simple PLLs
  clk: berlin: add driver for BG2x audio/video PLL
  clk: st: Terminate of match table
  clk/exynos4: Fix compilation warning
  ARM: shmobile: r8a7779: Add clock index macros for DT sources
  clk: divider: Fix overflow in clk_divider_bestdiv
  clk: u300: Terminate of match table
  ...

Pull VFIO updates from Alex Williamson:
 "A handful of VFIO bug fixes for v3.16"

* tag 'vfio-v3.16-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio/pci: Fix wrong MSI interrupt count
  drivers/vfio: Rework offsetofend()
  vfio/iommu_type1: Avoid overflow
  vfio/pci: Fix unchecked return value
  vfio/pci: Fix sizing of DPA and THP express capabilities

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 3.16:

   - Added test vectors for SHA/AES-CCM/DES-CBC/3DES-CBC.
   - Fixed a number of error-path memory leaks in tcrypt.
   - Fixed error-path memory leak in caam.
   - Removed unnecessary global mutex from mxs-dcp.
   - Added ahash walk interface that can actually be asynchronous.
   - Cleaned up caam error reporting.
   - Allow crypto_user get operation to be used by non-root users.
   - Add support for SSS module on Exynos.
   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6: (60 commits)
  crypto: testmgr - add aead cbc des, des3_ede tests
  crypto: testmgr - Fix DMA-API warning
  crypto: cesa - tfm->__crt_alg->cra_type directly
  crypto: sahara - tfm->__crt_alg->cra_name directly
  crypto: padlock - tfm->__crt_alg->cra_name directly
  crypto: n2 - tfm->__crt_alg->cra_name directly
  crypto: dcp - tfm->__crt_alg->cra_name directly
  crypto: cesa - tfm->__crt_alg->cra_name directly
  crypto: ccp - tfm->__crt_alg->cra_name directly
  crypto: geode - Don't use tfm->__crt_alg->cra_name directly
  crypto: geode - Weed out printk() from probe()
  crypto: geode - Consistently use AES_KEYSIZE_128
  crypto: geode - Kill AES_IV_LENGTH
  crypto: geode - Kill AES_MIN_BLOCK_SIZE
  crypto: mxs-dcp - Remove global mutex
  crypto: hash - Add real ahash walk interface
  hwrng: n2-drv - Introduce the use of the managed version of kzalloc
  crypto: caam - reinitialize keys_fit_inline for decrypt and givencrypt
  crypto: s5p-sss - fix multiplatform build
  hwrng: timeriomem - remove unnecessary OOM messages
  ...

Pull exofs raid6 support from Boaz Harrosh:
 "These simple patches will enable raid6 using the kernel's raid6_pq
  engine for support under exofs and pnfs-objects.

  There is nothing needed to do at exofs and pnfs-obj.  Just fire your
  mkfs.exofs with --raid=6 (that was already supported before) and off
  you go as usual.  The ORE will pick up the new map and will start
  writing two devices of redundancy bits.  The patches are so simple
  because most of the ORE was already for the general raid case, only a
  few bug fixes were needed and the actual wiring into the raid6_pq
  engine"

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  ore: Support for raid 6
  ore: Remove redundant dev_order(), more cleanups
  ore: (trivial) reformat some code

This patch links f2fs_fiemap with generic function with get_block.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Pull btrfs fix from Chris Mason:
 "I had this in my 3.16 merge window queue, but it is small and obvious
  enough for 3.15.  I cherry-picked and retested against current rc8"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: send, fix corrupted path strings for long paths

Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the remaining fixes for v3.15.

  This series includes:

   - iser-target fix for ImmediateData exception reference count bug
     (Sagi + nab)
   - iscsi-target fix for MC/S login + potential iser-target MRDSL
     buffer overrun (Santosh + Roland)
   - iser-target fix for v3.15-rc multi network portal shutdown
     regression (nab)
   - target fix for allowing READ_CAPCITY during ALUA Standby access
     state (Chris + nab)
   - target fix for NULL pointer dereference of alua_access_state for
     un-configured devices (Chris + nab)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix alua_access_state attribute OOPs for un-configured devices
  target: Allow READ_CAPACITY opcode in ALUA Standby access state
  iser-target: Fix multi network portal shutdown regression
  iscsi-target: Fix wrong buffer / buffer overrun in iscsi_change_param_value()
  iser-target: Add missing target_put_sess_cmd for ImmedateData failure

Pull x86 fixes from Peter Anvin:
 "A significantly larger than I'd like set of patches for just below the
  wire.  All of these, however, fix real problems.

  The one thing that is genuinely scary in here is the change of SMP
  initialization, but that *does* fix a confirmed hang when booting
  virtual machines.

  There is also a patch to actually do the right thing about not
  offlining a CPU when there are not enough interrupt vectors available
  in the system; the accounting was done incorrectly.  The worst case
  for that patch is that we fail to offline CPUs when we should (the new
  code is strictly more conservative than the old), so is not
  particularly risky.

  Most of the rest is minor stuff; the EFI patches are all about
  exporting correct information to boot loaders and kexec"

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: EFI_MIXED should not prohibit loading above 4G
  x86/smpboot: Initialize secondary CPU only if master CPU will wait for it
  x86/smpboot: Log error on secondary CPU wakeup failure at ERR level
  x86: Fix list/memory corruption on CPU hotplug
  x86: irq: Get correct available vectors for cpu disable
  x86/efi: Do not export efi runtime map in case old map
  x86/efi: earlyprintk=efi,keep fix