Update documentation of the common I/O layer:
- Add MSS-specific example.
- Add more information on ccwgroup devices.
- Add channel path type attribute.
- Fix typo.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When cio waits for the interrupt for a basic sense, interrupts for hsch() or
csch() issued in the meantime are wrongly counted as interrupts for the basic
sense and the accumulated irb is passed to the device driver.  In
ccw_device_w4sense(), check for clear or halt function in the irb and pass the
irb for the csch() or hsch() to the device driver.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

While working on these patch set, I found several possible cleanup on x86-64
and ia64.

akpm: I stole this from Andi's queue.

Not only does it clean up bitops.  It also unrelatedly changes the prototype
of pci_mmcfg_init() and removes its arch_initcall().  It seems that the wrong
two patches got joined together, but this is the one which has been tested.

This patch fixes the current x86_64 build error (the pci_mmcfg_init()
declaration in arch/i386/pci/pci.h disagrees with the definition in
arch/x86_64/pci/mmconfig.c)

This also means that x86_64's pci_mmcfg_init() gets called in the same (new)
manner as x86's: from arch/i386/pci/init.c:pci_access_init(), rather than via
initcall.

The bitops cleanups came along for free.

All this worked OK in -mm testing (since 2.6.16-rc4-mm1) because x86_64 was
tested with both patches applied.
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Con Kolivas <kernel@kolivas.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
"don't be verbose".  This is confusing and counter-intuitive.

In addition, there is also no way to set the MS_VERBOSE flag in the
mount(8) program in util-linux, but interesting, it does define options
which would do the right thing if MS_SILENT were defined, which
unfortunately we do not:

#ifdef MS_SILENT
  { "quiet",    0, 0, MS_SILENT    },   /* be quiet  */
  { "loud",     0, 1, MS_SILENT    },   /* print out messages. */
#endif

So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
with MS_SILENT.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

All architecture independent system calls should be declared
in syscalls.h, add the one that is missing.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I screwed up this conversion - we should be iterating across online CPUs, not
possible ones.

Spotted by Joe Perches <joe@perches.com>

Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch removes old-style kernel thread initialization
and changes w1 to use kthread api.
It is based on Christoph Hellwig <hch@lst.de> work.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

You don't know what type a u64 is, hence you cannot print it without a cast.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The w1 netlink socket is created by a hardware specific driver calling
w1_add_master_device, so there is no point in including a module alias
for netlink autoloading in the core.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

W1_DS9490 was renamed to W1_MASTER_DS9490, but the entry in the
dependencies of W1_MASTER_DS9490_BRIDGE was forgotten.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch contains the following cleanups:
- make needlessly global code static
- declarations for global code belong into header files
- w1.c: #if 0 the unused struct w1_slave_device
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6:
  NTFS: 2.1.27 - Various bug fixes and cleanups.
  NTFS: Semaphore to mutex conversion.
  NTFS: Handle the recently introduced -ENAMETOOLONG return value from
  NTFS: Add a missing call to flush_dcache_mft_record_page() in
  NTFS: Fix a bug in fs/ntfs/inode.c::ntfs_read_locked_index_inode() where we
  NTFS: Improve comments on file attribute flags in fs/ntfs/layout.h.
  NTFS: Limit name length in fs/ntfs/unistr.c::ntfs_nlstoucs() to maximum
  NTFS: Remove all the make_bad_inode() calls.  This should only be called
  NTFS: Add support for sparse files which have a compression unit of 0.
  NTFS: Fix comparison of $MFT and $MFTMirr to not bail out when there are
  NTFS: Use buffer_migrate_page() for the ->migratepage function of all ntfs
  NTFS: Fix a buggette in an "should be impossible" case handling where we
  NTFS: Fix an (innocent) off-by-one error in the runlist code.
  NTFS: Fix two compiler warnings on Alpha.  Thanks to Andrew Morton for

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (45 commits)
  [PATCH] Restore channel setting after scan.
  [PATCH] hostap: Fix memory leak on PCI probe error path
  [PATCH] hostap: Remove dead code (duplicated idx != 0)
  [PATCH] hostap: Fix unlikely read overrun in CIS parsing
  [PATCH] hostap: Fix double free in prism2_config() error path
  [PATCH] hostap: Fix ap_add_sta() return value verification
  [PATCH] hostap: Fix hw reset after CMDCODE_ACCESS_WRITE timeout
  [PATCH] wireless/airo: cache wireless scans
  [PATCH] wireless/airo: define default MTU
  [PATCH] wireless/airo: clean up printk usage to print device name
  [PATCH] WE-20 for kernel 2.6.16
  [PATCH] softmac: remove function_enter()
  [PATCH] skge: version 1.5
  [PATCH] skge: compute available ring buffers
  [PATCH] skge: dont free skb until multi-part transmit complete
  [PATCH] skge: multicast statistics fix
  [PATCH] skge: rx_reuse called twice
  [PATCH] skge: dont use dev_alloc_skb for rx buffs
  [PATCH] skge: align receive buffers
  [PATCH] sky2: dont need to use dev_kfree_skb_any
  ...

* 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
  [PATCH] relay: consolidate sendfile() and read() code
  [PATCH] relay: add sendfile() support
  [PATCH] relay: migrate from relayfs to a generic relay API

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (3568k): zoran: Use i2c_master_send when possible
  V4L/DVB (3568j): adv7175: Drop unused encoder dump command
  V4L/DVB (3568i): adv7175: Drop unused register cache
  V4L/DVB (3568h): cpia: correct email address
  V4L/DVB (3568g): sem2mutex: zoran
  V4L/DVB (3568f): saa7110: Fix array overrun
  V4L/DVB (3568e): bt856: Spare memory
  V4L/DVB (3568d): saa7111.c fix
  V4L/DVB (3568c): zoran: Init cleanups
  V4L/DVB (3568b): saa7111: Prevent array overrun
  V4L/DVB (3568a): saa7114: Fix i2c block write

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (36 commits)
  [PATCH] hwmon: add required idr locking
  [PATCH] I2C: hwmon: Rename register parameters
  [PATCH] I2C: Drop unneeded i2c-dev.h includes
  [PATCH] I2C: i2c-ixp4xx: Add hwmon class
  [PATCH] I2C: i2c-piix4: Add Broadcom HT-1000 support
  [PATCH] I2C: i2c-amd756-s4882: Improve static mutex initialization
  [PATCH] I2C: i2c-ali1535: Drop redundant mutex
  [PATCH] i2c: Cleanup isp1301_omap
  [PATCH] i2c: Fix i2c-ite name initialization
  [PATCH] i2c: Drop the i2c-frodo bus driver
  [PATCH] i2c: Optimize core_lists mutex usage
  [PATCH] w83781d: Don't reset the chip by default
  [PATCH] w83781d: Document the alarm and beep bits
  [PATCH] w83627ehf: Refactor the sysfs interface
  [PATCH] hwmon: Support the Pentium M VID code
  [PATCH] hwmon: Add support for the Winbond W83687THF
  [PATCH] hwmon: f71805f semaphore to mutex conversions
  [PATCH] hwmon: Semaphore to mutex conversions
  [PATCH] i2c: Semaphore to mutex conversions, part 3
  [PATCH] i2c: Semaphore to mutex conversions, part 2
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (49 commits)
  [PATCH] acpiphp: fix acpi_path_name
  [PATCH] ibmphp: remove TRUE and FALSE
  [PATCH] PCI Hotplug: add common acpi functions to core
  [PATCH] PCI: kzalloc() conversion in drivers/pci
  [PATCH] acpiphp: Scan slots under the nested P2P bridge
  [PATCH] PCI Hotplug: SN: Fix cleanup on hotplug removal of PPB
  [PATCH] shpchp: cleanup bus speed handling
  [PATCH] PCI: fix pci_request_region[s] arg
  [PATCH] PCI: Provide a boot parameter to disable MSI
  [PATCH] PCI: the scheduled removal of PCI_LEGACY_PROC
  [PATCH] PCI: cpqphp_ctrl.c: board_replaced(): remove dead code
  [PATCH] acpiphp: fix bridge handle
  [PATCH] acpiphp - slot management fix - V4
  [PATCH] acpi: remove dock event handling from ibm_acpi
  [PATCH] acpiphp: add dock event handling
  [PATCH] acpi: export acpi_bus_trim
  [PATCH] acpiphp: add new bus to acpi
  [PATCH] PCI: Move pci_dev_put outside a spinlock
  [PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix
  [PATCH] PCI: fix problems with MSI-X on ia64
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Update driver version and reldate.
  [TG3]: Add 5755 nvram support
  [TG3]: Add 5755 support
  [IPV6]: ip6_xmit: remove unnecessary NULL ptr check
  [NET_SCHED]: cls_u32: remove unnecessary NULL-ptr check
  [IPV4]: Add fib rule netlink notifications
  [BNX2]: Update version and reldate
  [BNX2]: Separate tx producer and consumer fields
  [BNX2]: Move .h files to bnx2.c
  [BNX2]: Combine small mem allocations
  [BNX2]: Fix link change handling
  [PKTGEN]: Add MPLS extension.

* git://oss.sgi.com:8090/oss/git/xfs-2.6: (71 commits)
  [XFS] Sync up one/two other minor changes missed in previous merges.
  [XFS] Reenable the noikeep (delete inode cluster space) option by default.
  [XFS] Check that a page has dirty buffers before finding it acceptable for
  [XFS] Fixup naming inconsistencies found by Pekka Enberg and one from Jan
  [XFS] Explain the race closed by the addition of vn_iowait() to the start
  [XFS] Fixing the error caused by the conflict between DIO Write's
  [XFS] Fixing KDB's xrwtrc command, also added the current process id into
  [XFS] Fix compiler warning from xfs_file_compat_invis_ioctl prototype. 
  [XFS] remove bogus INT_GET for u8 variables in xfs_dir_leaf.c 
  [XFS] endianess annotations for xfs_da_node_hdr_t 
  [XFS] endianess annotations for xfs_da_node_entry_t 
  [XFS] store xfs_attr_inactive_list_t in native endian 
  [XFS] store xfs_attr_sf_sort in native endian 
  [XFS] endianess annotations for xfs_attr_shortform_t 
  [XFS] endianess annotations for xfs_attr_leaf_name_remote_t 
  [XFS] endianess annotations for xfs_attr_leaf_name_local_t 
  [XFS] endianess annotations for xfs_attr_leaf_entry_t 
  [XFS] endianess annotations for xfs_attr_leaf_hdr_t 
  [XFS] remove bogus INT_GET on u8 variables in xfs_dir2_block.c 
  [XFS] endianess annotations for xfs_da_blkinfo_t 
  ...

I encountered the problem that the insmod of the acpiphp
fails because of the mis-freeing of the memory.

I tested this patch on my tiger4 box.
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch removes the defines TRUE and FALSE and just uses 0 or 1.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.  In addition,
there are functions in both these files that are also in acpiphp_glue.c.
This patch will remove duplicate functions from shpchp, pciehp, and
acpiphp and move this functionality to pci_hotplug, as it is not
hardware specific.  Get rid of shpchprm* and pciehprm* files since they
are no longer needed.  shpchprm_nonacpi.c and pciehprm_nonacpi.c are
identical, as well as shpchprm_legacy.c and can be replaced with a
macro.

This patch also changes acpiphp to use the common hpp code.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this patch converts drivers/pci to kzalloc usage.
Compile tested with allyes config.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Current ACPIPHP driver scans only slots under the top level PCI-to-PCI
bridge. So hotplug PCI slots under the nested PCI-to-PCI bridge would
not be detected. For example, if the system has the ACPI namespace
like below, hotplug slots woule not be detected.

Device (PCI0) {						/* Root bridge */
	Name (_HID, "PNP0A03")
	Device (P2PA) {					/* PCI-to-PCI bridge */
		Name (_ADR, ...)
		Device (P2PB) {				/* PCI-to-PCI bridge */
			Name (_ADR, ...)
			Device (S0F0) {			/* hotplug slot */
				Name (_ADR, ...)
				Name (_SUN, ...)
				Method (_EJ0, ...) { ... }
			}
			...
			Device (S0F7) {			/* hotplug slot */
				Name (_ADR, ...)
				Name (_SUN, ...)
				Method (_EJ0, ...) { ... }
			}
			Device (S1F0) {			/* hotplug slot */
				Name (_ADR, ...)
				Name (_SUN, ...)
				Method (_EJ0, ...) { ... }
			}
			...
		}
	}
}

This patch fixes this issue.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When doing a hotplug removal of a PPB, sn_bus_store_sysdata()
needs to be called for the PPB and all of its children.
Acked-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The code related to handling bus speed in SHPCHP driver is
unnecessarily complex. This patch cleans up and simplify that.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

    Add missing 'const' to pci_request_region[s] 'res_name' arg,
    since we pass it directly to __request_region(), whose 'name' arg
    is also const.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Several drivers are starting to grow options to disable MSI.  However,
it's often a host chipset issue, not something which individual drivers
should handle.  So we add the pci=nomsi kernel parameter to allow the user
to disable MSI modes for systems we haven't added to the quirk list yet.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch contains the scheduled removal of PCI_LEGACY_PROC.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Coverity checker correctly noted, that in function board_replaced in
drivers/pci/hotplug/cpqphp_ctrl.c, the variable src always has the
value 8, and therefore much code after the

...
                        if (rc || src) {
...
                                if (rc)
                                        return rc;
                                else
                                        return 1;
                        }
...

can never be called.

This patch removes the unreachable code in this function fixing kernel
Bugzilla #6073.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When hotplug slot is under the host bridge,
DEVICE_ACPI_HANDLE(&bus->self->dev) fails since '&bus->self' was not set.
This patch fixes it.

This patch is based on kristen's latest patches.
I tested this patch on my Tiger4.
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

o This patch removes IDs (for slots management).
o This patch removes the slot register/unregister processes
  from the init/exit phases. Instead, adds these processes
  in the bridge add/cleanup phases.
o Currently, this change doesn't have any meanings. But
  these changes are needed to support p2p bridge(with
  hotplug slot)
Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove dock station support from ibm_acpi by default.  This support has
been put into acpiphp instead.  Allow ibm_acpi to continue to provide
docking station support via config option for laptops/docking stations
that are not supported by acpiphp.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

These patches add generic dock event handling to acpiphp.  If there are
pci devices that need to be inserted/removed after the dock event, the
event notification will be handed down to the normal pci hotplug event
handler in acpiphp so that new bridges/devices can be enumerated.

Because some dock stations do not have pci bridges or pci devices that
need to be inserted after a dock, acpiphp will remain loaded to handle
dock events even if no hotpluggable pci slots are discovered.

You probably need to have the pci=assign-busses kernel parameter enabled
to use these patches, and you may not allow ibm_acpi to handle docking
notifications and use this patch.

This patch incorporates feedback provided by many.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Export the acpi_bus_trim function so that the pci hotplug driver can
use it.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If we add a new bridge with subordinate busses, we should call make sure
that acpi is notified so that the PRT (if present) can be read and drivers
who have registered on this bus will be notified when it is started.
Also make sure to use the max reserved bus number for the starting the bus
scan.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as659) fixes a might_sleep problem in the PCI core, by moving
a call to pci_dev_put() outside the scope of a spinlock.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>