- 28 Apr, 2023 6 commits
-
-
Antoine Tenart authored
The skb hash comes from sk->sk_txhash when using TCP, except for some IPv6 RST packets. This is because in tcp_v6_send_reset when not in TIME_WAIT the hash is taken from sk->sk_hash, while it should come from sk->sk_txhash as those two hashes are not computed the same way. Packetdrill script to test the above, 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > (flowlabel 0x1) S 0:0(0) <...> // Wrong ack seq, trigger a rst. +0 < S. 0:0(0) ack 0 win 4000 // Check the flowlabel matches prior one from SYN. +0 > (flowlabel 0x1) R 0:0(0) <...> Fixes: 9258b8b1 ("ipv6: tcp: send consistent autoflowlabel in RST packets") Signed-off-by:
Antoine Tenart <atenart@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrea Mayer authored
On some distributions, the rp_filter is automatically set (=1) by default on a netdev basis (also on VRFs). In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using the table associated with the VRF bound to that tunnel. During lookup operations, the rp_filter can lead to packet loss when activated on the VRF. Therefore, we chose to make this selftest more robust by explicitly disabling the rp_filter during tests (as it is automatically set by some Linux distributions). Fixes: 03a0b567 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Tested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Cong Wang authored
When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e5 ("sit: add IPv4 over IPv4 support") Reported-by:
Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Vlad Buslov authored
Error handler of tcf_block_bind() frees the whole bo->cb_list on error. However, by that time the flow_block_cb instances are already in the driver list because driver ndo_setup_tc() callback is called before that up the call chain in tcf_block_offload_cmd(). This leaves dangling pointers to freed objects in the list and causes use-after-free[0]. Fix it by also removing flow_block_cb instances from driver_list before deallocating them. [0]: [ 279.868433] ================================================================== [ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0 [ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963 [ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4 [ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 279.876295] Call Trace: [ 279.876882] <TASK> [ 279.877413] dump_stack_lvl+0x33/0x50 [ 279.878198] print_report+0xc2/0x610 [ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.879994] kasan_report+0xae/0xe0 [ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core] [ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0 [ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.885037] ? tcf_block_setup+0x6b0/0x6b0 [ 279.885901] ? mutex_lock+0x7d/0xd0 [ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0 [ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress] [ 279.888846] tcf_block_get_ext+0x61c/0x1200 [ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress] [ 279.891701] qdisc_create+0x401/0xea0 [ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470 [ 279.893473] tc_modify_qdisc+0x6f7/0x16d0 [ 279.894344] ? tc_get_qdisc+0xac0/0xac0 [ 279.895213] ? mutex_lock+0x7d/0xd0 [ 279.896005] ? __mutex_lock_slowpath+0x10/0x10 [ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.898672] ? __sys_sendmsg+0xb5/0x140 [ 279.899494] ? do_syscall_64+0x3d/0x90 [ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.901337] ? kasan_save_stack+0x2e/0x40 [ 279.902177] ? kasan_save_stack+0x1e/0x40 [ 279.903058] ? kasan_set_track+0x21/0x30 [ 279.903913] ? kasan_save_free_info+0x2a/0x40 [ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0 [ 279.905741] ? kmem_cache_free+0x179/0x400 [ 279.906599] netlink_rcv_skb+0x12c/0x360 [ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.908360] ? netlink_ack+0x1550/0x1550 [ 279.909192] ? rhashtable_walk_peek+0x170/0x170 [ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390 [ 279.911086] ? _copy_from_iter+0x3d6/0xc70 [ 279.912031] netlink_unicast+0x553/0x790 [ 279.912864] ? netlink_attachskb+0x6a0/0x6a0 [ 279.913763] ? netlink_recvmsg+0x416/0xb50 [ 279.914627] netlink_sendmsg+0x7a1/0xcb0 [ 279.915473] ? netlink_unicast+0x790/0x790 [ 279.916334] ? iovec_from_user.part.0+0x4d/0x220 [ 279.917293] ? netlink_unicast+0x790/0x790 [ 279.918159] sock_sendmsg+0xc5/0x190 [ 279.918938] ____sys_sendmsg+0x535/0x6b0 [ 279.919813] ? import_iovec+0x7/0x10 [ 279.920601] ? kernel_sendmsg+0x30/0x30 [ 279.921423] ? __copy_msghdr+0x3c0/0x3c0 [ 279.922254] ? import_iovec+0x7/0x10 [ 279.923041] ___sys_sendmsg+0xeb/0x170 [ 279.923854] ? copy_msghdr_from_user+0x110/0x110 [ 279.924797] ? ___sys_recvmsg+0xd9/0x130 [ 279.925630] ? __perf_event_task_sched_in+0x183/0x470 [ 279.926656] ? ___sys_sendmsg+0x170/0x170 [ 279.927529] ? ctx_sched_in+0x530/0x530 [ 279.928369] ? update_curr+0x283/0x4f0 [ 279.929185] ? perf_event_update_userpage+0x570/0x570 [ 279.930201] ? __fget_light+0x57/0x520 [ 279.931023] ? __switch_to+0x53d/0xe70 [ 279.931846] ? sockfd_lookup_light+0x1a/0x140 [ 279.932761] __sys_sendmsg+0xb5/0x140 [ 279.933560] ? __sys_sendmsg_sock+0x20/0x20 [ 279.934436] ? fpregs_assert_state_consistent+0x1d/0xa0 [ 279.935490] do_syscall_64+0x3d/0x90 [ 279.936300] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.937311] RIP: 0033:0x7f21c814f887 [ 279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 279.941448] RSP: 002b:00007fff11efd478 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 279.942964] RAX: ffffffffffffffda RBX: 0000000064401979 RCX: 00007f21c814f887 [ 279.944337] RDX: 0000000000000000 RSI: 00007fff11efd4e0 RDI: 0000000000000003 [ 279.945660] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 279.947003] R10: 00007f21c8008708 R11: 0000000000000246 R12: 0000000000000001 [ 279.948345] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400 [ 279.949690] </TASK> [ 279.950706] Allocated by task 2960: [ 279.951471] kasan_save_stack+0x1e/0x40 [ 279.952338] kasan_set_track+0x21/0x30 [ 279.953165] __kasan_kmalloc+0x77/0x90 [ 279.954006] flow_block_cb_setup_simple+0x3dd/0x7c0 [ 279.955001] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.956020] tcf_block_get_ext+0x61c/0x1200 [ 279.956881] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.957873] qdisc_create+0x401/0xea0 [ 279.958656] tc_modify_qdisc+0x6f7/0x16d0 [ 279.959506] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.960392] netlink_rcv_skb+0x12c/0x360 [ 279.961216] netlink_unicast+0x553/0x790 [ 279.962044] netlink_sendmsg+0x7a1/0xcb0 [ 279.962906] sock_sendmsg+0xc5/0x190 [ 279.963702] ____sys_sendmsg+0x535/0x6b0 [ 279.964534] ___sys_sendmsg+0xeb/0x170 [ 279.965343] __sys_sendmsg+0xb5/0x140 [ 279.966132] do_syscall_64+0x3d/0x90 [ 279.966908] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.968407] Freed by task 2960: [ 279.969114] kasan_save_stack+0x1e/0x40 [ 279.969929] kasan_set_track+0x21/0x30 [ 279.970729] kasan_save_free_info+0x2a/0x40 [ 279.971603] ____kasan_slab_free+0x11a/0x1b0 [ 279.972483] __kmem_cache_free+0x14d/0x280 [ 279.973337] tcf_block_setup+0x29d/0x6b0 [ 279.974173] tcf_block_offload_cmd.isra.0+0x226/0x2d0 [ 279.975186] tcf_block_get_ext+0x61c/0x1200 [ 279.976080] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.977065] qdisc_create+0x401/0xea0 [ 279.977857] tc_modify_qdisc+0x6f7/0x16d0 [ 279.978695] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.979562] netlink_rcv_skb+0x12c/0x360 [ 279.980388] netlink_unicast+0x553/0x790 [ 279.981214] netlink_sendmsg+0x7a1/0xcb0 [ 279.982043] sock_sendmsg+0xc5/0x190 [ 279.982827] ____sys_sendmsg+0x535/0x6b0 [ 279.983703] ___sys_sendmsg+0xeb/0x170 [ 279.984510] __sys_sendmsg+0xb5/0x140 [ 279.985298] do_syscall_64+0x3d/0x90 [ 279.986076] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.987532] The buggy address belongs to the object at ffff888147e2bf00 which belongs to the cache kmalloc-192 of size 192 [ 279.989747] The buggy address is located 32 bytes inside of freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0) [ 279.992367] The buggy address belongs to the physical page: [ 279.993430] page:00000000550f405c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147e2a [ 279.995182] head:00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2) [ 279.997878] raw: 0200000000010200 ffff888100042a00 0000000000000000 dead000000000001 [ 279.999384] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 280.000894] page dumped because: kasan: bad access detected [ 280.002386] Memory state around the buggy address: [ 280.003338] ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.004781] ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.007700] ^ [ 280.008592] ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 280.010035] ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.011564] ================================================================== Fixes: 59094b1e ("net: sched: use flow block API") Signed-off-by:Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Eric Dumazet authored
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy using hugepages, and skb length bigger than ~68 KB. skb_copy_ubufs() assumed it could copy all payload using up to MAX_SKB_FRAGS order-0 pages. This assumption broke when BIG TCP was able to put up to 512 KB per skb. We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45 and limit gso_max_size to 180000. A solution is to use higher order pages if needed. v2: add missing __GFP_COMP, or we leak memory. Fixes: 7c4e983c ("net: allow gso_max_size to exceed 65536") Reported-by:
-
Cosmo Chou authored
ncsi_channel_is_tx() determines whether a given channel should be used for Tx or not. However, when reconfiguring the channel by handling a Configuration Required AEN, there is a misjudgment that the channel Tx has already been enabled, which results in the Enable Channel Network Tx command not being sent. Clear the channel Tx enable flag before reconfiguring the channel to avoid the misjudgment. Fixes: 8d951a75 ("net/ncsi: Configure multi-package, multi-channel modes with failover") Signed-off-by:
Cosmo Chou <chou.cosmo@gmail.com> Signed-off-by:
-
- 27 Apr, 2023 14 commits
-
-
Paolo Abeni authored
Geetha sowjanya says: ==================== Macsec fixes for CN10KB This patch set has fixes for the issues encountered while testing macsec on CN10KB silicon. Below is the description of patches: Patch 1: For each LMAC two MCSX_MCS_TOP_SLAVE_CHANNEL_CFG registers exist in CN10KB. Bypass has to be disabled in two registers. Patch 2: Add workaround for errata w.r.t accessing TCAM DATA and MASK registers. Patch 3: Fixes the parser configuration to allow PTP traffic. Patch 4: Addresses the IP vector and block level interrupt mask changes. Patch 5: Fix NULL pointer crashes when rebooting Patch 6: Since MCS is global block shared by all LMACS the TCAM match must include macsec DMAC also to distinguish each macsec interface Patch 7: Before freeing MCS hardware resource to AF clear the stats also. Patch 8: Stats which share single counter in hardware are tracked in software. This tracking was based on wrong secy mode params. Use correct secy mode params Patch 9: When updating secy mode params, PN number was also reset to initial values. Hence do not write to PN value register when updating secy. ==================== Link: https://lore.kernel.org/r/20230426062528.20575-1-gakula@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Subbaraya Sundeep authored
After creating SecYs, SCs and SAs a SecY can be modified to change attributes like validation mode, protect frames mode etc. During this SecY update, packet number is reset to initial user given value by mistake. Hence do not reset PN when updating SecY parameters. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Subbaraya Sundeep authored
Macsec stats like InPktsLate and InPktsDelayed share same counter in hardware. If SecY replay_protect is true then counter represents InPktsLate otherwise InPktsDelayed. This mode change was tracked based on protect_frames instead of replay_protect mistakenly. Similarly InPktsUnchecked and InPktsOk share same counter and mode change was tracked based on validate_check instead of validate_disabled. This patch fixes those problems. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Subbaraya Sundeep authored
When freeing MCS hardware resources like SecY, SC and SA the corresponding stats needs to be cleared. Otherwise previous stats are shown in newly created macsec interfaces. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Subbaraya Sundeep authored
On CN10KB silicon a single hardware macsec block is present and offloads macsec operations for all the ethernet LMACs. TCAM match with macsec ethertype 0x88e5 alone at RX side is not sufficient to distinguish all the macsec interfaces created on top of netdevs. Hence append the DMAC of the macsec interface too. Otherwise the first created macsec interface only receives all the macsec traffic. Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Subbaraya Sundeep authored
When system is rebooted after creating macsec interface below NULL pointer dereference crashes occurred. This patch fixes those crashes by using correct order of teardown [ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 3324.415726] Mem abort info: [ 3324.418510] ESR = 0x96000006 [ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits [ 3324.426865] SET = 0, FnV = 0 [ 3324.429913] EA = 0, S1PTW = 0 [ 3324.433047] Data abort info: [ 3324.435921] ISV = 0, ISS = 0x00000006 [ 3324.439748] CM = 0, WnR = 0 .... [ 3324.575915] Call trace: [ 3324.578353] cn10k_mdo_del_secy+0x24/0x180 [ 3324.582440] macsec_common_dellink+0xec/0x120 [ 3324.586788] macsec_notify+0x17c/0x1c0 [ 3324.590529] raw_notifier_call_chain+0x50/0x70 [ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c [ 3324.599921] rollback_registered_many+0x354/0x5bc [ 3324.604616] unregister_netdevice_queue+0x88/0x10c [ 3324.609399] unregister_netdev+0x20/0x30 [ 3324.613313] otx2_remove+0x8c/0x310 [ 3324.616794] pci_device_shutdown+0x30/0x70 [ 3324.620882] device_shutdown+0x11c/0x204 [ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 966.673712] Mem abort info: [ 966.676497] ESR = 0x96000006 [ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits [ 966.684848] SET = 0, FnV = 0 [ 966.687895] EA = 0, S1PTW = 0 [ 966.691028] Data abort info: [ 966.693900] ISV = 0, ISS = 0x00000006 [ 966.697729] CM = 0, WnR = 0 [ 966.833467] Call trace: [ 966.835904] cn10k_mdo_stop+0x20/0xa0 [ 966.839557] macsec_dev_stop+0xe8/0x11c [ 966.843384] __dev_close_many+0xbc/0x140 [ 966.847298] dev_close_many+0x84/0x120 [ 966.851039] rollback_registered_many+0x114/0x5bc [ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0 [ 966.860952] unregister_netdevice_many+0x18/0x24 [ 966.865560] macsec_notify+0x1ac/0x1c0 [ 966.869303] raw_notifier_call_chain+0x50/0x70 [ 966.873738] call_netdevice_notifiers_info+0x34/0x7c [ 966.878694] rollback_registered_many+0x354/0x5bc [ 966.883390] unregister_netdevice_queue+0x88/0x10c [ 966.888173] unregister_netdev+0x20/0x30 [ 966.892090] otx2_remove+0x8c/0x310 [ 966.895571] pci_device_shutdown+0x30/0x70 [ 966.899660] device_shutdown+0x11c/0x204 [ 966.903574] __do_sys_reboot+0x208/0x290 [ 966.907487] __arm64_sys_reboot+0x20/0x30 [ 966.911489] el0_svc_handler+0x80/0x1c0 [ 966.915316] el0_svc+0x8/0x180 [ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060) [ 966.924448] ---[ end trace 341778e799c3d8d7 ]--- Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Geetha sowjanya authored
On CN10KB, MCS IP vector number, BBE and PAB interrupt mask got changed to support more block level interrupts. To address this changes, this patch fixes the bbe and pab interrupt handlers. Fixes: 6c635f78 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by:
-
Geetha sowjanya authored
When ptp timestamp is enabled in RPM, RPM will append 8B timestamp header for all RX traffic. MCS need to skip these 8 bytes header while parsing the packet header, so that correct tcam key is created for lookup. This patch fixes the mcs parser configuration to skip this 8B header for ptp packets. Fixes: ca7f49ff ("octeontx2-af: cn10k: Introduce driver for macsec block.") Signed-off-by:
-
Subbaraya Sundeep authored
As per hardware errata on CN10KB, all the four TCAM_DATA and TCAM_MASK registers has to be written at once otherwise write to individual registers will fail. Hence write to all TCAM_DATA registers and then to all TCAM_MASK registers. Fixes: cfc14181 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources") Signed-off-by:
-
Geetha sowjanya authored
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX registers. For CN10KB both register need to be configured for the port level mcs bypass to work. This patch also sets bitmap of flowid/secy entry reserved for default bypass so that these entries can be shown in debugfs. Fixes: bd69476e ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by:
-
John Hickey authored
Commit 4fe81585 ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. Fixes: 4fe81585 ("ixgbe: let the xdpdrv work with more than 64 cpus") Signed-off-by:
John Hickey <jjh@daedalian.us> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Pedro Tammela authored
Ido Schimmel reports a memleak on a syzkaller instance: BUG: memory leak unreferenced object 0xffff88803d45e400 (size 1024): comm "syz-executor292", pid 563, jiffies 4295025223 (age 51.781s) hex dump (first 32 bytes): 28 bd 70 00 fb db df 25 02 00 14 1f ff 02 00 02 (.p....%........ 00 32 00 00 1f 00 00 00 ac 14 14 3e 08 00 07 00 .2.........>.... backtrace: [<ffffffff81bd0f2c>] kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] [<ffffffff81bd0f2c>] slab_post_alloc_hook mm/slab.h:772 [inline] [<ffffffff81bd0f2c>] slab_alloc_node mm/slub.c:3452 [inline] [<ffffffff81bd0f2c>] __kmem_cache_alloc_node+0x25c/0x320 mm/slub.c:3491 [<ffffffff81a865d9>] __do_kmalloc_node mm/slab_common.c:966 [inline] [<ffffffff81a865d9>] __kmalloc+0x59/0x1a0 mm/slab_common.c:980 [<ffffffff83aa85c3>] kmalloc include/linux/slab.h:584 [inline] [<ffffffff83aa85c3>] tcf_pedit_init+0x793/0x1ae0 net/sched/act_pedit.c:245 [<ffffffff83a90623>] tcf_action_init_1+0x453/0x6e0 net/sched/act_api.c:1394 [<ffffffff83a90e58>] tcf_action_init+0x5a8/0x950 net/sched/act_api.c:1459 [<ffffffff83a96258>] tcf_action_add+0x118/0x4e0 net/sched/act_api.c:1985 [<ffffffff83a96997>] tc_ctl_action+0x377/0x490 net/sched/act_api.c:2044 [<ffffffff83920a8d>] rtnetlink_rcv_msg+0x46d/0xd70 net/core/rtnetlink.c:6395 [<ffffffff83b24305>] netlink_rcv_skb+0x185/0x490 net/netlink/af_netlink.c:2575 [<ffffffff83901806>] rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6413 [<ffffffff83b21cae>] netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] [<ffffffff83b21cae>] netlink_unicast+0x5be/0x8a0 net/netlink/af_netlink.c:1365 [<ffffffff83b2293f>] netlink_sendmsg+0x9af/0xed0 net/netlink/af_netlink.c:1942 [<ffffffff8380c39f>] sock_sendmsg_nosec net/socket.c:724 [inline] [<ffffffff8380c39f>] sock_sendmsg net/socket.c:747 [inline] [<ffffffff8380c39f>] ____sys_sendmsg+0x3ef/0xaa0 net/socket.c:2503 [<ffffffff838156d2>] ___sys_sendmsg+0x122/0x1c0 net/socket.c:2557 [<ffffffff8381594f>] __sys_sendmsg+0x11f/0x200 net/socket.c:2586 [<ffffffff83815ab0>] __do_sys_sendmsg net/socket.c:2595 [inline] [<ffffffff83815ab0>] __se_sys_sendmsg net/socket.c:2593 [inline] [<ffffffff83815ab0>] __x64_sys_sendmsg+0x80/0xc0 net/socket.c:2593 The recently added static offset check missed a free to the key buffer when bailing out on error. Fixes: e1201bc7 ("net/sched: act_pedit: check static offsets a priori") Reported-by:Ido Schimmel <idosch@idosch.org> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
-
Ivan Vecera authored
Commit 08a0063d ("net/sched: flower: Move filter handle initialization earlier") moved filter handle initialization but an assignment of the handle to fnew->handle is done regardless of fold value. This is wrong because if fold != NULL (so fold->handle == handle) no new handle is allocated and passed handle is assigned to fnew->handle. Then if any subsequent action in fl_change() fails then the handle value is removed from IDR that is incorrect as we will have still valid old filter instance with handle that is not present in IDR. Fix this issue by moving the assignment so it is done only when passed fold == NULL. Prior the patch: [root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances exit: 123 exit: 0 RTNETLINK answers: Invalid argument We have an error talking to the kernel Command failed tmp/replace_6:1885 All test results: 1..1 not ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances Command exited with 123, expected 0 RTNETLINK answers: Invalid argument We have an error talking to the kernel Command failed tmp/replace_6:1885 After the patch: [root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances All test results: 1..1 ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances Fixes: 08a0063d ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
-
David Howells authored
Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to see if it should exit the loop without first checking the call state. This is probably safe as if call->error is set, the call is dead anyway, but we should probably wait for the call state to have been set to completion first, lest it cause surprise on the way out. Fix this by only accessing call->error if the call is complete. We don't actually need to access the error inside the loop as we'll do that after. This caused the following report: BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1: rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22 rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479 rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714 rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline] rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350 rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464 rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461 kthread+0x1ac/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0: rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296 rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726 rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x375/0x4c0 net/socket.c:2501 ___sys_sendmsg net/socket.c:2555 [inline] __sys_sendmmsg+0x263/0x500 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0xffffffea Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread") Reported-by: syzbot+ebc945fdb4acd72cba78@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/000000000000e7c6d205fa10a3cd@google.com/Signed-off-by:David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Dmitry Vyukov <dvyukov@google.com> cc: "David S. Miller" <davem@davemloft.net> cc: Eric Dumazet <edumazet@google.com> cc: Jakub Kicinski <kuba@kernel.org> cc: Paolo Abeni <pabeni@redhat.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/508133.1682427395@warthog.procyon.org.ukSigned-off-by:
-
- 26 Apr, 2023 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command() scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately scsi: cxlflash: s/semahpore/semaphore/ scsi: lpfc: Silence an incorrect device output scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation scsi: scsi_debug: Fix missing error code in scsi_debug_init() scsi: hisi_sas: Work around build failure in suspend function scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() scsi: mpt3sas: Fix an issue when driver is being removed scsi: mpt3sas: Remove HBA BIOS version in the kernel log scsi: target: core: Fix invalid memory access scsi: scsi_debug: Drop sdebug_queue scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd scsi: scsi_debug: Use scsi_block_requests() to block queues scsi: scsi_debug: Protect block_unblock_all_queues() with mutex scsi: scsi_debug: Change shost list lock to a mutex ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata updates from Damien Le Moal: - Many cleanups of the pata_parport driver and of its protocol modules (Ondrej) - Remove unused code (ata_id_xxx() functions) (Sergey) - Add Add UniPhier SATA controller DT bindings (Kunihiko) - Fix dependencies for the Freescale QorIQ AHCI SATA controller driver (Geert) - DT property handling improvements (Rob) * tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (57 commits) ata: pata_parport-bpck6: Declare mode_map as static ata: pata_parport-bpck6: Remove dependency on 64BIT ata: pata_parport-bpck6: reduce indents in bpck6_open ata: pata_parport-bpck6: delete ppc6lnx.c ata: pata_parport-bpck6: move defines and mode_map to bpck6.c ata: pata_parport-bpck6: move ppc6_wr_data_byte to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_rd_data_byte to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_send_cmd to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_deselect to bpck6.c and rename ata: pata_parport-bpck6: merge ppc6_select into bpck6_open ata: pata_parport-bpck6: move ppc6_open to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_wr_extout to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_wait_for_fifo to bpck6.c and rename ata: pata_parport-bpck6: merge ppc6_wr_data_blk into bpck6_write_block ata: pata_parport-bpck6: merge ppc6_rd_data_blk into bpck6_read_block ata: pata_parport-bpck6: merge ppc6_wr_port16_blk into bpck6_write_block ata: pata_parport-bpck6: merge ppc6_rd_port16_blk into bpck6_read_block ata: pata_parport-bpck6: merge ppc6_wr_port into bpck6_write_regr ata: pata_parport-bpck6: merge ppc6_rd_port into bpck6_read_regr ata: pata_parport-bpck6: remove ppc6_close ...
-
Linus Torvalds authored
Merge tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Split dm-bufio's rw_semaphore and rbtree. Offers improvements to dm-bufio's locking to allow increased concurrent IO -- particularly for read access for buffers already in dm-bufio's cache. - Also split dm-bio-prison-v1's spinlock and rbtree with comparable aim at improving concurrent IO (for the DM thinp target). - Both the dm-bufio and dm-bio-prison-v1 scaling of the number of locks and rbtrees used are managed by dm_num_hash_locks(). And the hash function used by both is dm_hash_locks_index(). - Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE to be split at the target specified boundary (in terms of max_discard_sectors, max_write_zeroes_sectors and max_secure_erase_sectors respectively). - DM verity error handling fix for check_at_most_once on FEC. - Update DM verity target to emit audit events on verification failure and more. - DM core ->io_hints improvements needed in support of new discard support that is added to the DM "zero" and "error" targets. - Fix missing kmem_cache_destroy() call in initialization error path of both the DM integrity and DM clone targets. - A couple fixes for DM flakey, also add "error_reads" feature. - Fix DM core's resume to not lock FS when the DM map is NULL; otherwise initial table load can race with FS mount that takes superblock's ->s_umount rw_semaphore. - Various small improvements to both DM core and DM targets. * tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits) dm: don't lock fs when the map is NULL in process of resume dm flakey: add an "error_reads" option dm flakey: remove trailing space in the table line dm flakey: fix a crash with invalid table line dm ioctl: fix nested locking in table_clear() to remove deadlock concern dm: unexport dm_get_queue_limits() dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE dm: add helper macro for simple DM target module init and exit dm raid: remove unused d variable dm: remove unnecessary (void*) conversions dm mirror: add DMERR message if alloc_workqueue fails dm: push error reporting down to dm_register_target() dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path dm clone: call kmem_cache_destroy() in dm_clone_init() error path dm error: add discard support dm zero: add discard support dm table: allow targets without devices to set ->io_hints dm verity: emit audit events on verification failure and more dm verity: fix error handling for check_at_most_once on FEC dm: improve hash_locks sizing and hash function ...
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block updates from Jens Axboe: - drbd patches, bringing us closer to unifying the out-of-tree version and the in tree one (Andreas, Christoph) - support for auto-quiesce for the s390 dasd driver (Stefan) - MD pull request via Song: - md/bitmap: Optimal last page size (Jon Derrick) - Various raid10 fixes (Yu Kuai, Li Nan) - md: add error_handlers for raid0 and linear (Mariusz Tkaczyk) - NVMe pull request via Christoph: - Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - Validate nvmet module parameters (Chaitanya Kulkarni) - Fence TCP socket on receive error (Chris Leech) - Fix async event trace event (Keith Busch) - Minor cleanups (Chaitanya Kulkarni, zhenwei pi) - Fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - Fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - Fix irq locking in nvme-fcloop (Ming Lei) - Remove queue mapping helper for rdma devices (Sagi Grimberg) - use structured request attribute checks for nbd (Jakub) - fix blk-crypto race conditions between keyslot management (Eric) - add sed-opal support for reading read locking range attributes (Ondrej) - make fault injection configurable for null_blk (Akinobu) - clean up the request insertion API (Christoph) - clean up the queue running API (Christoph) - blkg config helper cleanups (Tejun) - lazy init support for blk-iolatency (Tejun) - various fixes and tweaks to ublk (Ming) - remove hybrid polling. It hasn't really been useful since we got async polled IO support, and these days we don't support sync polled IO at all (Keith) - misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming, Chaitanya, me) * tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits) nbd: fix incomplete validation of ioctl arg ublk: don't return 0 in case of any failure sed-opal: geometry feature reporting command null_blk: Always check queue mode setting from configfs block: ublk: switch to ioctl command encoding blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush block, bfq: Fix division by zero error on zero wsum fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m block: store bdev->bd_disk->fops->submit_bio state in bdev block: re-arrange the struct block_device fields for better layout md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer ... -
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring updates from Jens Axboe: - Cleanup of the io-wq per-node mapping, notably getting rid of it so we just have a single io_wq entry per ring (Breno) - Followup to the above, move accounting to io_wq as well and completely drop struct io_wqe (Gabriel) - Enable KASAN for the internal io_uring caches (Breno) - Add support for multishot timeouts. Some applications use timeouts to wake someone waiting on completion entries, and this makes it a bit easier to just have a recurring timer rather than needing to rearm it every time (David) - Support archs that have shared cache coloring between userspace and the kernel, and hence have strict address requirements for mmap'ing the ring into userspace. This should only be parisc/hppa. (Helge, me) - XFS has supported O_DIRECT writes without needing to lock the inode exclusively for a long time, and ext4 now supports it as well. This is true for the common cases of not extending the file size. Flag the fs as having that feature, and utilize that to avoid serializing those writes in io_uring (me) - Enable completion batching for uring commands (me) - Revert patch adding io_uring restriction to what can be GUP mapped or not. This does not belong in io_uring, as io_uring isn't really special in this regard. Since this is also getting in the way of cleanups and improvements to the GUP code, get rid of if (me) - A few series greatly reducing the complexity of registered resources, like buffers or files. Not only does this clean up the code a lot, the simplified code is also a LOT more efficient (Pavel) - Series optimizing how we wait for events and run task_work related to it (Pavel) - Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel) - Misc cleanups and improvements (Pavel, me) * tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits) Revert "io_uring/rsrc: disallow multi-source reg buffers" io_uring: add support for multishot timeouts io_uring/rsrc: disassociate nodes and rsrc_data io_uring/rsrc: devirtualise rsrc put callbacks io_uring/rsrc: pass node to io_rsrc_put_work() io_uring/rsrc: inline io_rsrc_put_work() io_uring/rsrc: add empty flag in rsrc_node io_uring/rsrc: merge nodes and io_rsrc_put io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal io_uring/rsrc: remove unused io_rsrc_node::llist io_uring/rsrc: refactor io_queue_rsrc_removal io_uring/rsrc: simplify single file node switching io_uring/rsrc: clean up __io_sqe_buffers_update() io_uring/rsrc: inline switch_start fast path io_uring/rsrc: remove rsrc_data refs io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce io_uring/rsrc: use wq for quiescing io_uring/rsrc: refactor io_rsrc_ref_quiesce io_uring/rsrc: remove io_rsrc_node::done io_uring/rsrc: use nospec'ed indexes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs update from Jaegeuk Kim: "In this round, we've mainly modified to support non-power-of-two zone size, which is not required for f2fs by design. In order to avoid arch dependency, we refactored the messy rb_entry structure shared across different extent_cache. In addition to the improvement, we've also fixed several subtle bugs and error cases. Enhancements: - support non-power-of-two zone size for zoned device - remove sharing the rb_entry structure in extent cache - refactor f2fs_gc to call checkpoint in urgent condition - support iopoll Bug fixes: - fix potential corruption when moving a directory - fix to avoid use-after-free for cached IPU bio - fix the folio private usage - avoid kernel warnings or panics in the cp_error case - fix to recover quota data correctly - fix some bugs in atomic operations - fix system crash due to lack of free space in LFS - fix null pointer panic in tracepoint in __replace_atomic_write_block - fix iostat lock protection - fix scheduling while atomic in decompression path - preserve direct write semantics when buffering is forced - fix to call f2fs_wait_on_page_writeback() in f2fs_write_raw_pages()" * tag 'f2fs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: remove unnessary comment in __may_age_extent_tree f2fs: allocate node blocks for atomic write block replacement f2fs: use cow inode data when updating atomic write f2fs: remove power-of-two limitation of zoned device f2fs: allocate trace path buffer from names_cache f2fs: add has_enough_free_secs() f2fs: relax sanity check if checkpoint is corrupted f2fs: refactor f2fs_gc to call checkpoint in urgent condition f2fs: remove folio_detach_private() in .invalidate_folio and .release_folio f2fs: remove bulk remove_proc_entry() and unnecessary kobject_del() f2fs: support iopoll method f2fs: remove batched_trim_sections node description f2fs: fix to check return value of inc_valid_block_count() f2fs: fix to check return value of f2fs_do_truncate_blocks() f2fs: fix passing relative address when discard zones f2fs: fix potential corruption when moving a directory f2fs: add radix_tree_preload_end in error case f2fs: fix to recover quota data correctly f2fs: fix to check readonly condition correctly docs: f2fs: Correct instruction to disable checkpoint ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm updates from David Teigland: - Remove some unused features (related to lock timeouts) that have been previously scheduled for removal - Fix a bug where the pending callback flag would be incorrectly cleared, which could potentially result in missing a completion callback - Use an unbound workqueue for dlm socket handling so that socket operations can be processed with less delay - Fix possible lockspace join connection errors with large clusters (e.g. over 16 nodes) caused by a small socket backlog setting - Use atomic bit ops for internal flags to help avoid mistakes copying flag values from messages - Fix recently introduced bug where memory for lvb data could be unnecessarily allocated for a lock * tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: stop unnecessarily filling zero ms_extra bytes fs: dlm: switch lkb_sbflags to atomic ops fs: dlm: rsb hash table flag value to atomic ops fs: dlm: move internal flags to atomic ops fs: dlm: change dflags to use atomic bits fs: dlm: store lkb distributed flags into own value fs: dlm: remove DLM_IFL_LOCAL_MS flag fs: dlm: rename stub to local message flag fs: dlm: remove deprecated code parts DLM: increase socket backlog to avoid hangs with 16 nodes fs: dlm: add unbound flag to dlm_io workqueue fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Fix revoke processing at unmount and on read-only remount - Refuse reading in inodes with an impossible indirect block height - Various minor cleanups * tag 'gfs2-v6.3-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_ail_empty_gl no log flush on error gfs2: Issue message when revokes cannot be written gfs2: Perform second log flush in gfs2_make_fs_ro gfs2: return errors from gfs2_ail_empty_gl gfs2: Move variable assignment behind a null pointer check in inode_go_dump gfs2: Use gfs2_holder_initialized for jindex gfs2: Eliminate gfs2_trim_blocks gfs2: Fix inode height consistency check gfs2: Remove ghs[] from gfs2_unlink gfs2: Remove ghs[] from gfs2_link gfs2: Remove duplicate i_nlink check from gfs2_link()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "Mostly core changes and cleanups, some notable fixes and two performance improvements in directory logging. The IO path cleanups are removing or refactoring old code, scrub main loop has been completely rewritten also refactoring old code. There are some changes to non-btrfs code, mostly trivial, the cgroup punt bio logic is only moved from generic code. Performance improvements: - improve logging changes in a directory during one transaction, avoid iterating over items and reduce lock contention (fsync time 4x lower) - when logging directory entries during one transaction, reduce locking of subvolume trees by checking tree-log instead (improvement in throughput and latency for concurrent access to a subvolume) Notable fixes: - dev-replace: - properly honor read mode when requested to avoid reading from source device - target device won't be used for eventual read repair, this is unreliable for NODATASUM files - when there are unpaired (and unrepairable) metadata during replace, exit early with error and don't try to finish whole operation - scrub ioctl properly rejects unknown flags - fix global block reserve calculations - fix partial direct io write when there's a page fault in the middle, iomap will try to continue with partial request but the btrfs part did not match that, this can lead to zeros written instead of data Core changes: - io path: - continued cleanups and refactoring around bio handling - extent io submit path simplifications and cleanups - flush write path simplifications and cleanups - rework logic of passing sync mode of bio, with further cleanups - rewrite scrub code flow, restructure how the stripes are enumerated and verified in a more unified way - allow to set lower threshold for block group reclaim in debug mode to aid zoned mode testing - remove obsolete time-based delayed ref throttling logic when truncating items - DREW locks are not using percpu variables anymore - more warning fixes (-Wmaybe-uninitialized) - u64 division simplifications - error handling improvements Non-btrfs code changes: - push cgroup punt bio logic to btrfs code (there was no other user of that), the functionality can be now selected separately by BLK_CGROUP_PUNT_BIO - crc32c_impl removed after removing last uses in btrfs code - add btrfs_assertfail() to objtool table" * tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits) btrfs: mark btrfs_assertfail() __noreturn btrfs: fix uninitialized variable warnings btrfs: use log root when iterating over index keys when logging directory btrfs: avoid iterating over all indexes when logging directory btrfs: dev-replace: error out if we have unrepaired metadata error during btrfs: remove pointless loop at btrfs_get_next_valid_item() btrfs: scrub: reject unsupported scrub flags btrfs: reinterpret async discard iops_limit=0 as no delay btrfs: set default discard iops_limit to 1000 btrfs: remove unused raid56 functions which were dedicated for scrub btrfs: scrub: remove scrub_bio structure btrfs: scrub: remove scrub_block and scrub_sector structures btrfs: scrub: remove the old scrub recheck code btrfs: scrub: remove the old writeback infrastructure btrfs: scrub: remove scrub_parity structure btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure btrfs: scrub: introduce helper to queue a stripe for scrub btrfs: scrub: introduce error reporting functionality for scrub_stripe btrfs: scrub: introduce a writeback helper for scrub_stripe ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull ext2, reiserfs, udf, and quota updates from Jan Kara: "A couple of small fixes and cleanups for ext2, udf, reiserfs, and quota. The biggest change is making CONFIG_PRINT_QUOTA_WARNING depend on BROKEN with an outlook for removing it completely in an year or so" * tag 'fs_for_v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: mark PRINT_QUOTA_WARNING as BROKEN quota: update Kconfig comment reiserfs: remove unused iter variable quota: Use register_sysctl_init() for registering fs_dqstats_table reiserfs: remove unused sched_count variable ext2: remove redundant assignment to pointer end quota: make dquot_set_dqinfo return errors from ->write_info quota: fixup *_write_file_info() to return proper error code quota: simplify two-level sysctl registration for fs_dqstats_table udf: use wrapper i_blocksize() in udf_discard_prealloc() udf: Use folios in udf_adinicb_writepage() ext2: Check block size validity during mount ext2: Correct maximum ext2 filesystem block size
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "There are a number of major cleanups in ext4 this cycle: - The data=journal writepath has been significantly cleaned up and simplified, and reduces a large number of data=journal special cases by Jan Kara. - Ojaswin Muhoo has replaced linked list used to track extents that have been used for inode preallocation with a red-black tree in the multi-block allocator. This improves performance for workloads which do a large number of random allocating writes. - Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the multi-block allocator. - Matthew wilcox has converted the code paths for reading and writing ext4 pages to use folios. - Jason Yan has continued to factor out ext4_fill_super() into smaller functions for improve ease of maintenance and comprehension. - Josh Triplett has created an uapi header for ext4 userspace API's" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits) ext4: Add a uapi header for ext4 userspace APIs ext4: remove useless conditional branch code ext4: remove unneeded check of nr_to_submit ext4: move dax and encrypt checking into ext4_check_feature_compatibility() ext4: factor out ext4_block_group_meta_init() ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry() ext4: rename two functions with 'check' ext4: factor out ext4_flex_groups_free() ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy() ext4: factor out ext4_hash_info_init() Revert "ext4: Fix warnings when freezing filesystem with journaled data" ext4: Update comment in mpage_prepare_extent_to_map() ext4: Simplify handling of journalled data in ext4_bmap() ext4: Drop special handling of journalled data from ext4_quota_on() ext4: Drop special handling of journalled data from ext4_evict_inode() ext4: Fix special handling of journalled data from extent zeroing ext4: Drop special handling of journalled data from extent shifting operations ext4: Drop special handling of journalled data from ext4_sync_file() ext4: Commit transaction before writing back pages in data=journal mode ... -
git://git.kernel.org/pub/scm/fs/fsverity/linuxLinus Torvalds authored
Pull fsverity updates from Eric Biggers: "Several cleanups and fixes for fs/verity/, including a couple minor fixes to the changes in 6.3 that added support for Merkle tree block sizes less than the page size" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux: fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds fsverity: explicitly check for buffer overflow in build_merkle_tree() fsverity: use WARN_ON_ONCE instead of WARN_ON fs-verity: simplify sysctls with register_sysctl() fs/buffer.c: use b_folio for fsverity work
-
git://git.kernel.org/pub/scm/fs/fscrypt/linuxLinus Torvalds authored
Pull fscrypt updates from Eric Biggers: "A few cleanups for fs/crypto/, and another patch to prepare for the upcoming CephFS encryption support" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: optimize fscrypt_initialize() fscrypt: use WARN_ON_ONCE instead of WARN_ON fscrypt: new helper function - fscrypt_prepare_lookup_partial() fs/buffer.c: use b_folio for fscrypt work
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto updates from Herbert Xu: "API: - Total usage stats now include all that returned errors (instead of just some) - Remove maximum hash statesize limit - Add cloning support for hmac and unkeyed hashes - Demote BUG_ON in crypto_unregister_alg to a WARN_ON Algorithms: - Use RIP-relative addressing on x86 to prepare for PIE build - Add accelerated AES/GCM stitched implementation on powerpc P10 - Add some test vectors for cmac(camellia) - Remove failure case where jent is unavailable outside of FIPS mode in drbg - Add permanent and intermittent health error checks in jitter RNG Drivers: - Add support for 402xx devices in qat - Add support for HiSTB TRNG - Fix hash concurrency issues in stm32 - Add OP-TEE firmware support in caam" * tag 'v6.4-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (139 commits) i2c: designware: Add doorbell support for Mendocino i2c: designware: Use PCI PSP driver for communication powerpc: Move Power10 feature PPC_MODULE_FEATURE_P10 crypto: p10-aes-gcm - Remove POWER10_CPU dependency crypto: testmgr - Add some test vectors for cmac(camellia) crypto: cryptd - Add support for cloning hashes crypto: cryptd - Convert hash to use modern init_tfm/exit_tfm crypto: hmac - Add support for cloning crypto: hash - Add crypto_clone_ahash/shash crypto: api - Add crypto_clone_tfm crypto: api - Add crypto_tfm_get crypto: x86/sha - Use local .L symbols for code crypto: x86/crc32 - Use local .L symbols for code crypto: x86/aesni - Use local .L symbols for code crypto: x86/sha256 - Use RIP-relative addressing crypto: x86/ghash - Use RIP-relative addressing crypto: x86/des3 - Use RIP-relative addressing crypto: x86/crc32c - Use RIP-relative addressing crypto: x86/cast6 - Use RIP-relative addressing crypto: x86/cast5 - Use RIP-relative addressing ... -
Linus Torvalds authored
Merge tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array updates from Gustavo Silva: "Transform more zero-length and one-element arrays into C99 flexible-array members" * tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: uapi: net: ipv6: Replace fake flex-array with flex-array member drm/vmwgfx: Replace one-element array with flexible-array member ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helper
-
Paolo Abeni authored
commit 4bb7aac7 ("net: phy: fix circular LEDS_CLASS dependencies") solved a build failure, but introduces a new config knob with a default 'y' value: PHYLIB_LEDS. The latter is against the current new config policy. The exception was raised to allow the user to catch bad configurations without led support. Anyway the current definition of PHYLIB_LEDS does not fit the above goal: if LEDS_CLASS is disabled, the new config will be available only with PHYLIB disabled, too. Hide the mentioned config, to preserve the randconfig testing done so far, while respecting the mentioned policy. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni authored
No conflicts. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These update several cpufreq drivers and the cpufreq core, add sysfs interface for exposing the time really spent in the platform low-power state during suspend-to-idle, update devfreq (core and drivers) and the pm-graph suite of tools and clean up code. Specifics: - Fix the frequency unit in cpufreq_verify_current_freq checks() Sanjay Chandrashekara) - Make mode_state_machine in amd-pstate static (Tom Rix) - Make the cpufreq core require drivers with target_index() to set freq_table (Viresh Kumar) - Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang) - Use of_property_read_bool() for boolean properties in the pmac32 cpufreq driver (Rob Herring) - Make the cpufreq sysfs interface return proper error codes on obviously invalid input (qinyu) - Add guided autonomous mode support to the AMD P-state driver (Wyes Karny) - Make the Intel P-state driver enable HWP IO boost on all server platforms (Srinivas Pandruvada) - Add opp and bandwidth support to tegra194 cpufreq driver (Sumit Gupta) - Use of_property_present() for testing DT property presence (Rob Herring) - Remove MODULE_LICENSE in non-modules (Nick Alcock) - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss) - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof Kozlowski, Konrad Dybcio, and Bjorn Andersson) - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and Bartosz Golaszewski) - Updates and fixes for mediatek driver (Jia-Wei Chang and AngeloGioacchino Del Regno) - Use of_property_present() for testing DT property presence in the cpuidle code (Rob Herring) - Drop unnecessary (void *) conversions from the PM core (Li zeming) - Add sysfs files to represent time spent in a platform sleep state during suspend-to-idle and make AMD and Intel PMC drivers use them Mario Limonciello) - Use of_property_present() for testing DT property presence (Rob Herring) - Add set_required_opps() callback to the 'struct opp_table', to make the code paths cleaner (Viresh Kumar) - Update the pm-graph siute of utilities to v5.11 with the following changes: * New script which allows users to install the latest pm-graph from the upstream github repo. * Update all the dmesg suspend/resume PM print formats to be able to process recent timelines using dmesg only. * Add ethtool output to the log for the system's ethernet device if ethtool exists. * Make the tool more robustly handle events where mangled dmesg or ftrace outputs do not include all the requisite data. - Make the sleepgraph utility recognize "CPU killed" messages (Xueqin Luo) - Remove unneeded SRCU selection in Kconfig because it's always set from devfreq core (Paul E. McKenney) - Drop of_match_ptr() macro from exynos-bus.c because this driver is always using the DT table for driver probe (Krzysztof Kozlowski) - Use the preferred of_property_present() instead of the low-level of_get_property() on exynos-bus.c (Rob Herring) - Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li)" * tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits) platform/x86/intel/pmc: core: Report duration of time in HW sleep state platform/x86/intel/pmc: core: Always capture counters on suspend platform/x86/amd: pmc: Report duration of time in hw sleep state PM: Add sysfs files to represent time spent in hardware sleep state cpufreq: use correct unit when verify cur freq cpufreq: tegra194: add OPP support and set bandwidth cpufreq: amd-pstate: Make varaiable mode_state_machine static PM: core: Remove unnecessary (void *) conversions cpufreq: drivers with target_index() must set freq_table PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource() OPP: Move required opps configuration to specialized callback OPP: Handle all genpd cases together in _set_required_opps() cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290 dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623 cpufreq: mediatek: raise proc/sram max voltage for MT8516 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20230331, fix the ACPI SBS driver and the evaluation of the _PDC method on Xen dom0 in the ACPI processor driver, update the ACPI driver for Intel SoCs and clean up code in multiple places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230331 including the following changes: * Delete bogus node_array array of pointers from AEST table (Jessica Clarke) * Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang) * Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang) * Add missing tables to astable (Pedro Falcato) * Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen) * Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski) * Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary) * Update all copyrights/signons in ACPICA to 2023 (Bob Moore) * Add support for ClockInput resource (v6.5) (Niyas Sait) * Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L) * Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L) * Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein) * Make ACPICA code support flexible arrays properly (Kees Cook) * Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red) * Add os specific support for Zephyr RTOS to ACPICA (Najumon) * Update version to 20230331 (Bob Moore) - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne) - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu) - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen) - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser) - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker) - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko) - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan) - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue) - Add CXL error types to the error injection code in APEI (Tony Luck) - Refactor acpi_data_prop_read_single() (Andy Shevchenko) - Fix two issues in the ACPI SBS driver (Armin Wolf) - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi) - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki) - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede) - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring) - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K) - Update the pm_profile sysfs attribute documentation (Rafael Wysocki) - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to the ACPI driver for Intel SoCs (Hans de Goede)" * tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ...
-
