Routes are currently processed from a workqueue whereas nexthop objects
are processed in system call context. This can result in the driver not
finding a suitable nexthop group for a route and issuing a warning [1].

Fix this by ignoring such routes earlier in the process. The subsequent
deletion notification will be ignored as well.

[1]
 WARNING: CPU: 2 PID: 7754 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4853 mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum]
 [...]
 CPU: 2 PID: 7754 Comm: kworker/u8:0 Not tainted 5.11.0-rc6-cq-20210207-1 #16
 Hardware name: Mellanox Technologies Ltd. MSN2100/SA001390, BIOS 5.6.5 05/24/2018
 Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib_event_work [mlxsw_spectrum]
 RIP: 0010:mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum]

Fixes: cdd6cfc5 ("mlxsw: spectrum_router: Allow programming routes with nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Alex Veber <alexve@nvidia.com>
Tested-by: Alex Veber <alexve@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, only external bits are added to the PTYS register, whereas
there is one external bit that is wrongly marked as internal, and so was
recently removed from the register.

Add that bit to the PTYS register again, as this bit is no longer
internal.

Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer
being supported, causing a regression on some setups.

Fixes: 5bf01b57 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reported-by: Eddie Shklaer <eddies@nvidia.com>
Tested-by: Eddie Shklaer <eddies@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent, so that it is
always valid.

Fixes: b5b02939 ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a
user-provided "len" field of type signed int, and then compare the
value to the result of an "offsetofend" operation, which is unsigned.

Negative values provided by the user will be promoted to large
positive numbers; thus checking that len < offsetofend() will return
false when the intention was that it return true.

Note that while len is originally checked for negative values earlier
on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the
value from userspace which may have changed in the meantime.

Therefore, re-add the check for negative values after the call to
get_user in the handler code for TCP_ZEROCOPY_RECEIVE.

Fixes: c8856c05 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arjun Roy <arjunroy@google.com>
Link: https://lore.kernel.org/r/20210225232628.4033281-1-arjunroy.kdev@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When accessing the timecounter register on an i.MX8MQ the kernel hangs.
This is only the case when the interface is down. This can be reproduced
by reading with 'phc_ctrl eth0 get'.

Like described in the change in 91c0d987
the igp clock is disabled when the interface is down and leads to a
system hang.

So we check if the ptp clock status before reading the timecounter
register.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When CONFIG_PM_SLEEP is disabled, the compiler warns about unused
functions:

drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function]
static int mdio_bus_phy_suspend(struct device *dev)
drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function]
static int mdio_bus_phy_resume(struct device *dev)

The logic is intentional, so just mark these two as __maybe_unused
and remove the incorrect #ifdef.

Fixes: 4c0d2e96 ("net: phy: consider that suspend2ram may cut off PHY power")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210225145748.404410-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The new GPIO support may be optional at runtime, but it requires
building against gpiolib:

ERROR: modpost: "gpiochip_get_data" [drivers/net/dsa/mt7530.ko]
undefined!
ERROR: modpost: "devm_gpiochip_add_data_with_key"
[drivers/net/dsa/mt7530.ko] undefined!

Add #ifdef to exclude GPIO support if GPIOLIB is not enabled.

Fixes: 429a0ede ("net: dsa: mt7530: MT7530 optional GPIO support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Link: https://lore.kernel.org/r/20210226063226.8474-1-dqfext@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the ocelot driver code is in a library, the dsa tag
code cannot be built-in:

ld.lld: error: undefined symbol: ocelot_can_inject
>>> referenced by tag_ocelot_8021q.c
>>>               dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a

ld.lld: error: undefined symbol: ocelot_port_inject_frame
>>> referenced by tag_ocelot_8021q.c
>>>               dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a

Building the tag support only really makes sense for compile-testing
when the driver is available, so add a Kconfig dependency that prevents
the broken configuration while allowing COMPILE_TEST alternative when
MSCC_OCELOT_SWITCH_LIB is disabled entirely.  This case is handled
through the #ifdef check in include/soc/mscc/ocelot.h.

Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210225143910.3964364-2-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Without this option, the driver fails to link:

ld.lld: error: undefined symbol: devlink_sb_register
>>> referenced by ocelot_devlink.c
>>>               net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a
>>> referenced by ocelot_devlink.c
>>>               net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a

Fixes: f59fd9ca ("net: mscc: ocelot: configure watermarks using devlink-sb")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210225143910.3964364-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Joakim Zhang says:

====================
ethernet: fixes for stmmac driver

Fixes for stmmac driver.
---
ChangeLogs:
V1->V2:
	* subject prefix: ethernet: stmmac: -> net: stmmac:
	* use dma_addr_t instead of unsigned int for physical address
	* use cpu_to_le32()
V2->V3:
	* fix the build issue pointed out by kbuild bot.
	* add error handling for stmmac_reinit_rx_buffers() function.
V3->V4:
	* remove patch (net: stmmac: remove redundant null check for ptp clock),
	  reviewer thinks it should target net-next.
V4->V5:
	* use %pad format to print dma_addr_t.
	* extend dwmac4_display_ring() to support all descriptor types.
	* while() -> do-while()
====================

Link: https://lore.kernel.org/r/20210225090114.17562-1-qiangqing.zhang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

During suspend/resume stress test, we found descriptor write back by DMA
could exhibit unusual behavior, e.g.:
	003 [0xc4310030]: 0x0 0x40 0x0 0xb5010040

We can see that desc3 write back is 0xb5010040, it is still ownd by DMA,
so application would not recycle this buffer. It will trigger fatal bus
error when DMA try to use this descriptor again. To fix this issue, we
should re-init all rx buffers when mac resume back.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In current driver, buffer2 available only when hardware supports split
header. Wrongly set buffer2 valid in stmmac_rx_refill when refill buffer
address. You can see that desc3 is 0x81000000 after initialization, but
turn out to be 0x83000000 after refill.

Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Driver uses dma_alloc_coherent to allocate dma memory for descriptors,
dma_alloc_coherent will return both the virtual address and physical
address. AFAIK, virt_to_phys could not convert virtual address to
physical address, for which memory is allocated by dma_alloc_coherent.

dwmac4_display_ring() function is broken for various descriptor, it only
support normal descriptor(struct dma_desc) now, this patch also extends to
support all descriptor types.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

stmmac_xmit() call stmmac_tx_timer_arm() at the end to modify tx timer to
do the transmission cleanup work. Imagine such a situation, stmmac enters
suspend immediately after tx timer modified, it's expire callback
stmmac_tx_clean() would not be invoked. This could affect BQL, since
netdev_tx_sent_queue() has been called, but netdev_tx_completed_queue()
have not been involved, as a result, dql_avail(&dev_queue->dql) finally
always return a negative value.

__dev_queue_xmit->__dev_xmit_skb->qdisc_run->__qdisc_run->qdisc_restart->dequeue_skb:
	if ((q->flags & TCQ_F_ONETXQUEUE) &&
		netif_xmit_frozen_or_stopped(txq)) // __QUEUE_STATE_STACK_XOFF is set

Net core will stop transmitting any more. Finillay, net watchdong would timeout.
To fix this issue, we should call netdev_tx_reset_queue() in stmmac_resume().

Fixes: 54139cf3 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users
may only want to stop specific tx channel.

Fixes: 48863ce5 ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-2021-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.12

First set of fixes for v5.12. One iwlwifi kernel crash fix and smaller
fixes to multiple drivers.

ath9k
 * fix Spatial Multiplexing Power Save (SMPS) handling to improve thoughtput

mt76
 * error handling fixes
 * memory leax fixes

iwlwifi
 * don't crash during debug collection on DVM devices

MAINTAINERS
 * email address update

ath11k
 * fix GCC warning about DMA address debug messages
 * fix regression which broke QCA6390 AP mode

* tag 'wireless-drivers-2021-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
  mt76: mt7915: fix unused 'mode' variable
  mt76: dma: do not report truncated frames to mac80211
  mt76: mt7921: remove incorrect error handling
  iwlwifi: pcie: fix iwl_so_trans_cfg link error when CONFIG_IWLMVM is disabled
  ath11k: fix AP mode for QCA6390
  ath11k: qmi: use %pad to format dma_addr_t
  MAINTAINERS: update for mwifiex driver maintainers
  iwlwifi: avoid crash on unsupported debug collection
  mt76: mt7915: only modify tx buffer list after allocating tx token id
  mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
  ath9k: fix transmitting to stations in dynamic SMPS mode
====================

Link: https://lore.kernel.org/r/20210226164411.CDD03C433CA@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2021-02-26

1) Fix for bpf atomic insns with src_reg=r0, from Brendan.

2) Fix use after free due to bpf_prog_clone, from Cong.

3) Drop imprecise verifier log message, from Dmitrii.

4) Remove incorrect blank line in bpf helper description, from Hangbin.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: No need to drop the packet when there is no geneve opt
  bpf: Remove blank line in bpf helper description comment
  tools/resolve_btfids: Fix build error with older host toolchains
  selftests/bpf: Fix a compiler warning in global func test
  bpf: Drop imprecise log message
  bpf: Clear percpu pointers in bpf_prog_clone_free()
  bpf: Fix a warning message in mark_ptr_not_null_reg()
  bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================

Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

clang points out a possible corner case in the mt7915_tm_set_tx_cont()
function if called with invalid arguments:

drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
        rateval =  mode << 6 | rate_idx;
                   ^~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
        u8 rate_idx = td->tx_rate_idx, mode;
                                           ^

Change it to return an error instead of continuing with invalid data
here.

Fixes: 3f0caa3c ("mt76: mt7915: add support for continuous tx in testmode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Commit b102f0c5 ("mt76: fix array overflow on receiving too many
fragments for a packet") fixes a possible OOB access but it introduces a
memory leak since the pending frame is not released to page_frag_cache
if the frag array of skb_shared_info is full. Commit 93a1d479
("mt76: dma: fix a possible memory leak in mt76_add_fragment()") fixes
the issue but does not free the truncated skb that is forwarded to
mac80211 layer. Fix the leftover issue discarding even truncated skbs.

Fixes: 93a1d479 ("mt76: dma: fix a possible memory leak in mt76_add_fragment()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/a03166fcc8214644333c68674a781836e0f57576.1612697217.git.lorenzo@kernel.org

Clang points out a mistake in the error handling in
mt7921_mcu_tx_rate_report(), which tries to dereference a pointer that
cannot be initialized because of the error that is being handled:

drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:409:3: warning: variable 'stats' is uninitialized when used here [-Wuninitialized]
                stats->tx_rate = rate;
                ^~~~~
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c:401:32: note: initialize the variable 'stats' to silence this warning
        struct mt7921_sta_stats *stats;
                                      ^
Just remove the obviously incorrect line.

Fixes: 1c099ab4 ("mt76: mt7921: add MCU support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225145953.404859-2-arnd@kernel.org

Randy reported an error on his randconfig builds:

ERROR: modpost: "iwl_so_trans_cfg" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined!

The problem was that when CONFIG_IWLMVM was disabled we were still accessing
iwl_so_trans_cfg. Fix it by moving IS_ENABLED() check before the access.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 930be4e7 ("iwlwifi: add support for SnJ with Jf devices")
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1614236661-20274-1-git-send-email-kvalo@codeaurora.org

Merge tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The ZTE ZX platform is being removed, so the PWM driver is no longer
  needed and removed as well.

  Other than that this contains a small set of fixes and cleanups across
  a couple of drivers"

* tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: lpc18xx-sct: remove unneeded semicolon
  pwm: iqs620a: Correct a stale state variable
  pwm: iqs620a: Fix overflow and optimize calculations
  pwm: rockchip: Enable clock before calling clk_get_rate()
  pwm: rockchip: Eliminate potential race condition when probing
  pwm: rockchip: Replace "bus clk" with "PWM clk"
  pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()
  pwm: rockchip: Enable APB clock during register access while probing
  pwm: Remove ZTE ZX driver

Pull virtio updates from Michael Tsirkin:

 - new vdpa features to allow creation and deletion of new devices

 - virtio-blk support per-device queue depth

 - fixes, cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (31 commits)
  virtio-input: add multi-touch support
  virtio_mmio: fix one typo
  vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()
  virtio_net: Fix fall-through warnings for Clang
  virtio_input: Prevent EV_MSC/MSC_TIMESTAMP loop storm for MT.
  virtio-blk: support per-device queue depth
  virtio_vdpa: don't warn when fail to disable vq
  virtio-pci: introduce modern device module
  virito-pci-modern: rename map_capability() to vp_modern_map_capability()
  virtio-pci-modern: introduce helper to get notification offset
  virtio-pci-modern: introduce helper for getting queue nums
  virtio-pci-modern: introduce helper for setting/geting queue size
  virtio-pci-modern: introduce helper to set/get queue_enable
  virtio-pci-modern: introduce vp_modern_queue_address()
  virtio-pci-modern: introduce vp_modern_set_queue_vector()
  virtio-pci-modern: introduce vp_modern_generation()
  virtio-pci-modern: introduce helpers for setting and getting features
  virtio-pci-modern: introduce helpers for setting and getting status
  virtio-pci-modern: introduce helper to set config vector
  virtio-pci-modern: introduce vp_modern_remove()
  ...

Pull more MIPS updates from Thomas Bogendoerfer:

 - added n64 block driver

 - fix for ubsan warnings

 - fix for bcm63xx platform

 - update of linux-mips mailinglist

* tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  arch: mips: update references to current linux-mips list
  mips: bmips: init clocks earlier
  vmlinux.lds.h: catch even more instrumentation symbols into .data
  n64: store dev instance into disk private data
  n64: cleanup n64cart_probe()
  n64: cosmetics changes
  n64: remove curly brackets
  n64: use sector SECTOR_SHIFT instead 512
  n64: use enums for reg
  n64: move module param at the top
  n64: move module info at the end
  n64: use pr_fmt to avoid duplicate string
  block: Add n64 cart driver

Pull more drm updates from Dave Airlie:
 "This is mostly fixes but I missed msm-next pull last week. It's been
  in drm-next.

  Otherwise it's a selection of i915, amdgpu and misc fixes, one TTM
  memory leak, nothing really major stands out otherwise.

  core:
   - vblank fence timing improvements

  dma-buf:
   - improve error handling

  ttm:
   - memory leak fix

  msm:
   - a6xx speedbin support
   - a508, a509, a512 support
   - various a5xx fixes
   - various dpu fixes
   - qseed3lite support for sm8250
   - dsi fix for msm8994
   - mdp5 fix for framerate bug with cmd mode panels
   - a6xx GMU OOB race fixes that were showing up in CI
   - various addition and removal of semicolons
   - gem submit fix for legacy userspace relocs path

  amdgpu:
   - clang warning fix
   - S0ix platform shutdown/poweroff fix
   - misc display fixes

  i915:
   - color format fix
   - -Wuninitialised reenabled
   - GVT ww locking, cmd parser fixes

  atyfb:
   - fix build

  rockchip:
   - AFBC modifier fix"

* tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm: (60 commits)
  drm/panel: kd35t133: allow using non-continuous dsi clock
  drm/rockchip: Require the YTR modifier for AFBC
  drm/ttm: Fix a memory leak
  drm/drm_vblank: set the dma-fence timestamp during send_vblank_event
  dma-fence: allow signaling drivers to set fence timestamp
  dma-buf: heaps: Rework heap allocation hooks to return struct dma_buf instead of fd
  dma-buf: system_heap: Make sure to return an error if we abort
  drm/amd/display: Fix system hang after multiple hotplugs (v3)
  drm/amdgpu: fix shutdown and poweroff process failed with s0ix
  drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALID
  drm/i915: Enable -Wuninitialized
  drm/amd/display: Remove Assert from dcn10_get_dig_frontend
  drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1
  Revert "drm/amd/display: reuse current context instead of recreating one"
  drm/amd/pm/swsmu: Avoid using structure_size uninitialized in smu_cmn_init_soft_gpu_metrics
  fbdev: atyfb: add stubs for aty_{ld,st}_lcd()
  drm/i915/gvt: Introduce per object locking in GVT scheduler.
  drm/i915/gvt: Purge dev_priv->gt
  drm/i915/gvt: Parse default state to update reg whitelist
  dt-bindings: dp-connector: Drop maxItems from -supply
  ...

Pull networking fixes from Jakub Kicinski:
 "Rather small batch this time.

  Current release - regressions:

   - bcm63xx_enet: fix sporadic kernel panic due to queue length
     mis-accounting

  Current release - new code bugs:

   - bcm4908_enet: fix RX path possible mem leak

   - bcm4908_enet: fix NAPI poll returned value

   - stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe()

   - sched: cls_flower: validate ct_state for invalid and reply flags

  Previous releases - regressions:

   - net: introduce CAN specific pointer in the struct net_device to
     prevent mis-interpreting memory

   - phy: micrel: set soft_reset callback to genphy_soft_reset for
     KSZ8081

   - psample: fix netlink skb length with tunnel info

  Previous releases - always broken:

   - icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending

   - wireguard: device: do not generate ICMP for non-IP packets

   - mptcp: provide subflow aware release function to avoid a mem leak

   - hsr: add support for EntryForgetTime

   - r8169: fix jumbo packet handling on RTL8168e

   - octeontx2-af: fix an off by one in rvu_dbg_qsize_write()

   - i40e: fix flow for IPv6 next header (extension header)

   - phy: icplus: call phy_restore_page() when phy_select_page() fails

   - dpaa_eth: fix the access method for the dpaa_napi_portal"

* tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
  r8169: fix jumbo packet handling on RTL8168e
  net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
  net: psample: Fix netlink skb length with tunnel info
  net: broadcom: bcm4908_enet: fix NAPI poll returned value
  net: broadcom: bcm4908_enet: fix RX path possible mem leak
  net: hsr: add support for EntryForgetTime
  net: dsa: sja1105: Remove unneeded cast in sja1105_crc32()
  ibmvnic: fix a race between open and reset
  net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe()
  net: introduce CAN specific pointer in the struct net_device
  net: usb: qmi_wwan: support ZTE P685M modem
  wireguard: kconfig: use arm chacha even with no neon
  wireguard: queueing: get rid of per-peer ring buffers
  wireguard: device: do not generate ICMP for non-IP packets
  wireguard: peer: put frequently used members above cache lines
  wireguard: selftests: test multiple parallel streams
  wireguard: socket: remove bogus __be32 annotation
  wireguard: avoid double unlikely() notation when using IS_ERR()
  net: qrtr: Fix memory leak in qrtr_tun_open
  vxlan: move debug check after netdev unregister
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These make additional changes to the platform profile interface merged
  recently and add support for the FPDT ACPI table.

  Specifics:

   - Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add
     "balanced-performance" to the list of supported platform profiles
     and fix up some file references in a comment (Maximilian Luz).

   - Add support for parsing the ACPI Firmware Performance Data Table
     (FPDT) and exposing the data from there via sysfs (Zhang Rui)"

* tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: platform: Add balanced-performance platform profile
  ACPI: platform: Fix file references in comment
  ACPI: platform: Hide ACPI_PLATFORM_PROFILE option
  ACPI: tables: introduce support for FPDT table

Merge tag 'drm-intel-next-fixes-2021-02-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

A fix for color format check from Ville, plus the re-enable of -Wuninitialized
from Nathan, and the GVT fixes including fixes for ww locking, cmd parser and
a general cleanup of dev_priv->gt.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YDe3pBPV5Kx3hpk6@intel.com

Merge tag 'amd-drm-fixes-5.12-2021-02-24' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-5.12-2021-02-24:

amdgpu:
- Clang warning fix
- S0ix platform shutdown/poweroff fix
- Misc display fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210225043853.3880-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2021-02-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next tasty fixes for v5.12:
- Cherry pick of drm-misc-fixes pull:
"here's this week's PR for drm-misc-fixes. One of the patches is a memory
leak; the rest is for hardware issues."
- Fix dt bindings for dp connector.
- Fix build error in atyfb.
- Improve error handling for dma-buf heaps.
- Make vblank timestamp more correct, by recording timestamp to be set when signaling.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0f60a68c-d562-7266-0815-ea75ff680b17@linux.intel.com

Pull Kbuild updates from Masahiro Yamada:

 - Fix false-positive build warnings for ARCH=ia64 builds

 - Optimize dictionary size for module compression with xz

 - Check the compiler and linker versions in Kconfig

 - Fix misuse of extra-y

 - Support DWARF v5 debug info

 - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
   exceeded the limit

 - Add generic syscall{tbl,hdr}.sh for cleanups across arches

 - Minor cleanups of genksyms

 - Minor cleanups of Kconfig

* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
  initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
  kbuild: remove deprecated 'always' and 'hostprogs-y/m'
  kbuild: parse C= and M= before changing the working directory
  kbuild: reuse this-makefile to define abs_srctree
  kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
  kconfig: omit --oldaskconfig option for 'make config'
  kconfig: fix 'invalid option' for help option
  kconfig: remove dead code in conf_askvalue()
  kconfig: clean up nested if-conditionals in check_conf()
  kconfig: Remove duplicate call to sym_get_string_value()
  Makefile: Remove # characters from compiler string
  Makefile: reuse CC_VERSION_TEXT
  kbuild: check the minimum linker version in Kconfig
  kbuild: remove ld-version macro
  scripts: add generic syscallhdr.sh
  scripts: add generic syscalltbl.sh
  arch: syscalls: remove $(srctree)/ prefix from syscall tables
  arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
  gen_compile_commands: prune some directories
  kbuild: simplify access to the kernel's version
  ...

Pull ext4 updates from Ted Ts'o:
 "Miscellaneous ext4 cleanups and bug fixes. Pretty boring this cycle..."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: add .kunitconfig fragment to enable ext4-specific tests
  ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
  ext4: reset retry counter when ext4_alloc_file_blocks() makes progress
  ext4: fix potential htree index checksum corruption
  ext4: factor out htree rep invariant check
  ext4: Change list_for_each* to list_for_each_entry*
  ext4: don't try to processed freed blocks until mballoc is initialized
  ext4: use DEFINE_MUTEX() for mutex lock

* acpi-tables:
  ACPI: tables: introduce support for FPDT table

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Remove unnecessary locking around _OSC (Bjorn Helgaas)
   - Clarify message about _OSC failure (Bjorn Helgaas)
   - Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
   - Tidy checking of syscall user config accessors (Heiner Kallweit)

  Resource management:
   - Decline to resize resources if boot config must be preserved (Ard
     Biesheuvel)
   - Fix pci_register_io_range() memory leak (Geert Uytterhoeven)

  Error handling (Keith Busch):
   - Clear error status from the correct device
   - Retain error recovery status so drivers can use it after reset
   - Log the type of Port (Root or Switch Downstream) that we reset
   - Always request a reset for Downstream Ports in frozen state

  Endpoint framework and NTB (Kishon Vijay Abraham I):
   - Make *_get_first_free_bar() take into account 64 bit BAR
   - Add helper API to get the 'next' unreserved BAR
   - Make *_free_bar() return error codes on failure
   - Remove unused pci_epf_match_device()
   - Add support to associate secondary EPC with EPF
   - Add support in configfs to associate two EPCs with EPF
   - Add pci_epc_ops to map MSI IRQ
   - Add pci_epf_ops to expose function-specific attrs
   - Allow user to create sub-directory of 'EPF Device' directory
   - Implement ->msi_map_irq() ops for cadence
   - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
   - Add EP function driver to provide NTB functionality
   - Add support for EPF PCI Non-Transparent Bridge
   - Add specification for PCI NTB function device
   - Add PCI endpoint NTB function user guide
   - Add configfs binding documentation for pci-ntb endpoint function

  Broadcom STB PCIe controller driver:
   - Add support for BCM4908 and external PERST# signal controller
     (Rafał Miłecki)

  Cadence PCIe controller driver:
   - Retrain Link to work around Gen2 training defect (Nadeem Athani)
   - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
     Wilczyński)

  Freescale Layerscape PCIe controller driver:
   - Add LX2160A rev2 EP mode support (Hou Zhiqiang)
   - Convert to builtin_platform_driver() (Michael Walle)

  MediaTek PCIe controller driver:
   - Fix OF node reference leak (Krzysztof Wilczyński)

  Microchip PolarFlare PCIe controller driver:
   - Add Microchip PolarFire PCIe controller driver (Daire McNamara)

  Qualcomm PCIe controller driver:
   - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
   - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:
   - Drop PCIE_RCAR config option (Lad Prabhakar)
   - Always allocate MSI addresses in 32bit space (Marek Vasut)

  Rockchip PCIe controller driver:
   - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
   - Make 'ep-gpios' DT property optional (Chen-Yu Tsai)

  Synopsys DesignWare PCIe controller driver:
   - Work around ECRC configuration hardware defect (Vidya Sagar)
   - Drop support for config space in DT 'ranges' (Rob Herring)
   - Change size to u64 for EP outbound iATU (Shradha Todi)
   - Add upper limit address for outbound iATU (Shradha Todi)
   - Make dw_pcie ops optional (Jisheng Zhang)
   - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)

  Xilinx Versal CPM PCIe controller driver:
   - Fix OF node reference leak (Pan Bian)

  Miscellaneous:
   - Remove tango host controller driver (Arnd Bergmann)
   - Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
     (Martin Kaiser)
   - Fix xgene-msi race in installing chained IRQ handler (Martin
     Kaiser)
   - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
   - Fix pci-bridge-emul array overruns (Russell King)
   - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
     Siewior)"

* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
  PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
  PCI: qcom: Add support for ddrss_sf_tbu clock
  dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
  PCI: al: Remove useless dw_pcie_ops
  PCI: dwc: Don't assume the ops in dw_pcie always exist
  PCI: dwc: Add upper limit address for outbound iATU
  PCI: dwc: Change size to u64 for EP outbound iATU
  PCI: dwc: Drop support for config space in 'ranges'
  PCI: layerscape: Convert to builtin_platform_driver()
  PCI: layerscape: Add LX2160A rev2 EP mode support
  dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
  PCI: dwc: Work around ECRC configuration issue
  PCI/portdrv: Report reset for frozen channel
  PCI/AER: Specify the type of Port that was reset
  PCI/ERR: Retain status from error notification
  PCI/AER: Clear AER status from Root Port when resetting Downstream Port
  PCI/ERR: Clear status of the reporting device
  dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
  PCI: rockchip: Make 'ep-gpios' DT property optional
  Documentation: PCI: Add PCI endpoint NTB function user guide
  ...

Josef reported [0] that using jumbo packets fails on RTL8168e.
Aligning the values for register MaxTxPacketSize with the
vendor driver fixes the problem.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=211827

Fixes: d58d46b5 ("r8169: jumbo fixes.")
Reported-by: Josef Oškera <joskera@redhat.com>
Tested-by: Josef Oškera <joskera@redhat.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/b15ddef7-0d50-4320-18f4-6a3f86fbfd3e@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Following a similar reinstate for the KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

Bluntly removing that default may expose a lot of situations where various
PHYs/board implementations won't recover on various changes.
Like with this implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if it
did open a can of worms?

Atleast this fixes one iMX6 FEC/RMII/8081 combo.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <christian.melki@t2data.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull nds32 updates from Greentime Hu:
 "Code clean-up and refinement"

* tag 'nds32-for-linux-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: Fix bogus reference to <asm/procinfo.h>
  nds32: use get_kernel_nofault in dump_mem
  nds32: remove dump_instr
  nds32: configs: Cleanup CONFIG_CROSS_COMPILE
  nds32: Replace <linux/clk-provider.h> by <linux/of_clk.h>

Currently, the psample netlink skb is allocated with a size that does
not account for the nested 'PSAMPLE_ATTR_TUNNEL' attribute and the
padding required for the 64-bit attribute 'PSAMPLE_TUNNEL_KEY_ATTR_ID'.
This can result in failure to add attributes to the netlink skb due
to insufficient tail room. The following error message is printed to
the kernel log: "Could not create psample log message".

Fix this by adjusting the allocation size to take into account the
nested attribute and the padding.

Fixes: d8bed686 ("net: psample: Add tunnel support")
CC: Yotam Gigi <yotam.gi@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/20210225075145.184314-1-cmi@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Missing increment was resulting in poll function always returning 0
instead of amount of processed packets.

Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210224151842.2419-2-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After filling RX ring slot with new skb it's required to free old skb.
Immediately on error or later in the net subsystem.

Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210224151842.2419-1-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>