The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.

iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:

 $ tc filter show dev swp2 ingress
 ...
 filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
   eth_type ipv6
   dst_ip 2001:db8:1::7bf
   skip_sw
   in_hw in_hw_count 1
         action order 1:  police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
         ref 1 bind 1
         not_in_hw
         used_hw_stats immediate

The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.

Fix that by using JSON output instead.

Fixes: 5061e773 ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel points out that since commit 52cff74e ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.

One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
   -> dcb_ieee_setapp

If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().

Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.

Fixes: 91b0383f ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220302193939.1368823-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

seqno could be read as a stale value outside of the lock. The lock is
already acquired to protect the modification of seqno against a possible
race condition. Place the reading of this value also inside this locking
to protect it against a possible race condition.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

D. Wythe says:

====================
fix unexpected SMC_CLC_DECL_ERR_REGRMB error

We can easily trigger the SMC_CLC_DECL_ERR_REGRMB exception within
following script:

server: smc_run nginx
client: smc_run  ./wrk -c 2000 -t 8 -d 20 http://smc-server

And we can clearly see that this error is also divided into two types:

1. 0x09990003
2. 0x05000000/0x09990003

Which has the same root causes, but the immediate causes vary.

The root cause of this issues is that remove connections from link group
is not synchronous with add/delete rtoken entry,  which means that even
the number of connections is less that SMC_RMBS_PER_LGR_MAX, it does not
mean that the connection can register rtoken successfully later. In
other words, the rtoken entry may released, This will cause an
unexpected SMC_CLC_DECL_ERR_REGRMB to be reported, and then this SMC
connections have to fallback to TCP.

This patch set handles two types of SMC_CLC_DECL_ERR_REGRMB exceptions
from different perspectives.

Patch 1: fix the 0x05000000/0x09990003 error.
Patch 2: fix the 0x09990003 error.

After those patches, there is no SMC_CLC_DECL_ERR_REGRMB exceptions in
my
test case any more.

v1 -> v2:
- add bugfix patch for SMC_CLC_DECL_ERR_REGRMB cause by server side
v2 -> v3:
- fix incorrect mail thread
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.

This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.

Fixes: cd6851f3 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:

Server Conn A:           Server Conn B:			Client Conn B:

smc_lgr_unregister_conn
                        smc_lgr_register_conn
                        smc_clc_send_accept     ->
                                                        smc_rtoken_add
smcr_buf_unuse
		->		Client Conn A:
				smc_rtoken_delete

smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.

Fixes: 3e034725 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.

The following log reveals it:

[    3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[    3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[    3.975181] Call Trace:
[    3.976208]  local_pci_probe+0x13f/0x210
[    3.977248]  pci_device_probe+0x34c/0x6d0
[    3.977255]  ? pci_uevent+0x470/0x470
[    3.978265]  really_probe+0x24c/0x8d0
[    3.978273]  __driver_probe_device+0x1b3/0x280
[    3.979288]  driver_probe_device+0x50/0x370

Fix this by checking whether the 'ci' is a null pointer first.

Fixes: 8c14f9c7 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If recv_actor() returns an incorrect value, tcp_read_sock()
might loop forever.

Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, sk_psock_verdict_recv() returns skb->len

This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.

This causes an infinite loop from tcp_read_sock()

Followup patch will make tcp_read_sock() more robust vs bad actors.

Fixes: ef565928 ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20220302161723.3910001-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In order to function, the IPA driver very clearly requires the
interconnect framework to be enabled in the kernel configuration.
State that dependency in the Kconfig file.

This became a problem when CONFIG_COMPILE_TEST support was added.
Non-Qualcomm platforms won't necessarily enable CONFIG_INTERCONNECT.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38a4066f ("net: ipa: support COMPILE_TEST")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301113440.257916-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The truesize for a UDP GRO packet is added by main skb and skbs in main
skb's frag_list:
skb_gro_receive_list
        p->truesize += skb->truesize;

The commit 53475c5d ("net: fix use-after-free when UDP GRO with
shared fraglist") introduced a truesize increase for frag_list skbs.
When uncloning skb, it will call pskb_expand_head and trusesize for
frag_list skbs may increase. This can occur when allocators uses
__netdev_alloc_skb and not jump into __alloc_skb. This flow does not
use ksize(len) to calculate truesize while pskb_expand_head uses.
skb_segment_list
err = skb_unclone(nskb, GFP_ATOMIC);
pskb_expand_head
        if (!skb->sk || skb->destructor == sock_edemux)
                skb->truesize += size - osize;

If we uses increased truesize adding as delta_truesize, it will be
larger than before and even larger than previous total truesize value
if skbs in frag_list are abundant. The main skb truesize will become
smaller and even a minus value or a huge value for an unsigned int
parameter. Then the following memory check will drop this abnormal skb.

To avoid this error we should use the original truesize to segment the
main skb.

Fixes: 53475c5d ("net: fix use-after-free when UDP GRO with shared fraglist")
Signed-off-by: lena wang <lena.wang@mediatek.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1646133431-8948-1-git-send-email-lena.wang@mediatek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - Remove redundant iflink requests, by Sven Eckelmann (2 patches)

 - Don't expect inter-netns unique iflink indices, by Sven Eckelmann

* tag 'batadv-net-pullrequest-20220302' of git://git.open-mesh.org/linux-merge:
  batman-adv: Don't expect inter-netns unique iflink indices
  batman-adv: Request iflink once in batadv_get_real_netdevice
  batman-adv: Request iflink once in batadv-on-batadv check
====================

Link: https://lore.kernel.org/r/20220302163049.101957-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-for-net-2022-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

Johannes Berg says:

====================
Three more fixes:
 - fix build issue in iwlwifi, now that I understood
   what's going on there
 - propagate error in iwlwifi/mvm to userspace so it
   can figure out what's happening
 - fix channel switch related updates in P2P-client
   in cfg80211

* tag 'wireless-for-net-2022-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  iwlwifi: mvm: return value for request_ownership
  nl80211: Update bss channel on channel switch for P2P_CLIENT
  iwlwifi: fix build error for IWLMEI
====================

Link: https://lore.kernel.org/r/20220302214444.100180-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Propagate the value to the user space so it can understand
if the operation failed or not.

Fixes: bfcfdb59 ("iwlwifi: mvm: add vendor commands needed for iwlmei")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20220302072715.4885-1-emmanuel.grumbach@intel.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The wdev channel information is updated post channel switch only for
the station mode and not for the other modes. Due to this, the P2P client
still points to the old value though it moved to the new channel
when the channel change is induced from the P2P GO.

Update the bss channel after CSA channel switch completion for P2P client
interface as well.
Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@quicinc.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When CONFIG_IWLWIFI=m and CONFIG_IWLMEI=y, the kernel build system
must be told to build the iwlwifi/ subdirectory for both IWLWIFI and
IWLMEI so that builds for both =y and =m are done.

This resolves an undefined reference build error:

ERROR: modpost: "iwl_mei_is_connected" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined!

Fixes: 977df8bd ("wlwifi: work around reverse dependency on MEI")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Link: https://lore.kernel.org/r/20220227200051.7176-1-rdunlap@infradead.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In ("ptp: ocp: Have FPGA fold in ns adjustment for adjtime."), the
ns adjustment was written to the FPGA register, so the clock could
accurately perform adjustments.

However, the adjtime() call passes in a s64, while the clock adjustment
registers use a s32.  When trying to perform adjustments with a large
value (37 sec), things fail.

Examine the incoming delta, and if larger than 1 sec, use the original
(coarse) adjustment method.  If smaller than 1 sec, then allow the
FPGA to fold in the changes over a 1 second window.

Fixes: 6d59d4fa ("ptp: ocp: Have FPGA fold in ns adjustment for adjtime.")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220228203957.367371-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ifindex doesn't have to be unique for multiple network namespaces on
the same machine.

  $ ip netns add test1
  $ ip -net test1 link add dummy1 type dummy
  $ ip netns add test2
  $ ip -net test2 link add dummy2 type dummy

  $ ip -net test1 link show dev dummy1
  6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff
  $ ip -net test2 link show dev dummy2
  6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff

But the batman-adv code to walk through the various layers of virtual
interfaces uses this assumption because dev_get_iflink handles it
internally and doesn't return the actual netns of the iflink. And
dev_get_iflink only documents the situation where ifindex == iflink for
physical devices.

But only checking for dev->netdev_ops->ndo_get_iflink is also not an option
because ipoib_get_iflink implements it even when it sometimes returns an
iflink != ifindex and sometimes iflink == ifindex. The caller must
therefore make sure itself to check both netns and iflink + ifindex for
equality. Only when they are equal, a "physical" interface was detected
which should stop the traversal. On the other hand, vxcan_get_iflink can
also return 0 in case there was currently no valid peer. In this case, it
is still necessary to stop.

Fixes: b7eddd0b ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Fixes: 5ed4a460 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_get_real_netdevice. And since some of the
ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.

Fixes: 5ed4a460 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_is_on_batman_iface. And since some of the
.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.

Fixes: b7eddd0b ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>

When the DSA_NOTIFIER_TAG_PROTO returns an error, the user space process
which initiated the protocol change exits the kernel processing while
still holding the rtnl_mutex. So any other process attempting to lock
the rtnl_mutex would deadlock after such event.

The error handling of DSA_NOTIFIER_TAG_PROTO was inadvertently changed
by the blamed commit, introducing this regression. We must still call
rtnl_unlock(), and we must still call DSA_NOTIFIER_TAG_PROTO for the old
protocol. The latter is due to the limiting design of notifier chains
for cross-chip operations, which don't have a built-in error recovery
mechanism - we should look into using notifier_call_chain_robust for that.

Fixes: dc452a47 ("net: dsa: introduce tagger-owned storage for private and shared data")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220228141715.146485-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix regression with scanning not working in some systems.

* tag 'for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: Fix not checking MGMT cmd pending queue
====================

Link: https://lore.kernel.org/r/20220302004330.125536-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A number of places in the MGMT handlers we examine the command queue for
other commands (in progress but not yet complete) that will interact
with the process being performed. However, not all commands go into the
queue if one of:

1. There is no negative side effect of consecutive or redundent commands
2. The command is entirely perform "inline".

This change examines each "pending command" check, and if it is not
needed, deletes the check. Of the remaining pending command checks, we
make sure that the command is in the pending queue by using the
mgmt_pending_add/mgmt_pending_remove pair rather than the
mgmt_pending_new/mgmt_pending_free pair.

Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Use kfree_rcu(ptr, rcu) variant, using kfree_rcu(ptr) was not
   intentional. From Eric Dumazet.

2) Use-after-free in netfilter hook core, from Eric Dumazet.

3) Missing rcu read lock side for netfilter egress hook,
   from Florian Westphal.

4) nf_queue assume state->sk is full socket while it might not be.
   Invoke sock_gen_put(), from Florian Westphal.

5) Add selftest to exercise the reported KASAN splat in 4)

6) Fix possible use-after-free in nf_queue in case sk_refcnt is 0.
   Also from Florian.

7) Use input interface index only for hardware offload, not for
   the software plane. This breaks tc ct action. Patch from Paul Blakey.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  net/sched: act_ct: Fix flow table lookup failure with no originating ifindex
  netfilter: nf_queue: handle socket prefetch
  netfilter: nf_queue: fix possible use-after-free
  selftests: netfilter: add nfqueue TCP_NEW_SYN_RECV socket race test
  netfilter: nf_queue: don't assume sk is full socket
  netfilter: egress: silence egress hook lockdep splats
  netfilter: fix use-after-free in __nf_register_net_hook()
  netfilter: nf_tables: prefer kfree_rcu(ptr, rcu) variant
====================

Link: https://lore.kernel.org/r/20220301215337.378405-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After cited commit optimizted hw insertion, flow table entries are
populated with ifindex information which was intended to only be used
for HW offload. This tuple ifindex is hashed in the flow table key, so
it must be filled for lookup to be successful. But tuple ifindex is only
relevant for the netfilter flowtables (nft), so it's not filled in
act_ct flow table lookup, resulting in lookup failure, and no SW
offload and no offload teardown for TCP connection FIN/RST packets.

To fix this, add new tc ifindex field to tuple, which will
only be used for offloading, not for lookup, as it will not be
part of the tuple hash.

Fixes: 9795ded7 ("net/sched: act_ct: Fill offloading tuple iifidx")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'wireless-for-net-2022-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

johannes Berg says:

====================

Some last-minute fixes:
 * rfkill
   - add missing rfill_soft_blocked() when disabled

 * cfg80211
   - handle a nla_memdup() failure correctly
   - fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in
     Makefile

 * mac80211
   - fix EAPOL handling in 802.3 RX path
   - reject setting up aggregation sessions before
     connection is authorized to avoid timeouts or
     similar
   - handle some SAE authentication steps correctly
   - fix AC selection in mesh forwarding

 * iwlwifi
   - remove TWT support as it causes firmware crashes
     when the AP isn't behaving correctly
   - check debugfs pointer before dereferncing it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The kbuild change here accidentally removed not only the
unquoting, but also the last character of the variable
name. Fix that.

Fixes: 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf")
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220221155512.1d25895f7c5f.I50fa3d4189fcab90a2896fe8cae215035dae9508@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In case someone combines bpf socket assign and nf_queue, then we will
queue an skb who references a struct sock that did not have its
reference count incremented.

As we leave rcu protection, there is no guarantee that skb->sk is still
valid.

For refcount-less skb->sk case, try to increment the reference count
and then override the destructor.

In case of failure we have two choices: orphan the skb and 'delete'
preselect or let nf_queue() drop the packet.

Do the latter, it should not happen during normal operation.

Fixes: cf7fbe66 ("bpf: Add socket assign support")
Acked-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Florian Westphal <fw@strlen.de>

Eric Dumazet says:
  The sock_hold() side seems suspect, because there is no guarantee
  that sk_refcnt is not already 0.

On failure, we cannot queue the packet and need to indicate an
error.  The packet will be dropped by the caller.

v2: split skb prefetch hunk into separate change

Fixes: 271b72c7 ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

causes:
BUG: KASAN: slab-out-of-bounds in sk_free+0x25/0x80
Write of size 4 at addr ffff888106df0284 by task nf-queue/1459
 sk_free+0x25/0x80
 nf_queue_entry_release_refs+0x143/0x1a0
 nf_reinject+0x233/0x770

... without 'netfilter: nf_queue: don't assume sk is full socket'.
Signed-off-by: Florian Westphal <fw@strlen.de>

There is no guarantee that state->sk refers to a full socket.

If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.

I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.

Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

When we get anti-clogging token required (added by the commit
mentioned below), or the other status codes added by the later
commit 4e56cde1 ("mac80211: Handle special status codes in
SAE commit") we currently just pretend (towards the internal
state machine of authentication) that we didn't receive anything.

This has the undesirable consequence of retransmitting the prior
frame, which is not expected, because the timer is still armed.

If we just disarm the timer at that point, it would result in
the undesirable side effect of being in this state indefinitely
if userspace crashes, or so.

So to fix this, reset the timer and set a new auth_data->waiting
in order to have no more retransmissions, but to have the data
destroyed when the timer actually fires, which will only happen
if userspace didn't continue (i.e. crashed or abandoned it.)

Fixes: a4055e74 ("mac80211: Don't destroy auth data in case of anti-clogging")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

As there's potential for failure of the nla_memdup(),
check the return value.

Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301100020.3801187-1-jiasheng@iscas.ac.cnSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When "debugfs=off" is used on the kernel command line, iwiwifi's
mvm module uses an invalid/unchecked debugfs_dir pointer and causes
a BUG:

 BUG: kernel NULL pointer dereference, address: 000000000000004f
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 503 Comm: modprobe Tainted: G        W         5.17.0-rc5 #7
 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021
 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm]
 Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73
 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328
 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c
 RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620
 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000
 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320
 FS:  00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0
 PKRU: 55555554
 Call Trace:
  <TASK>
  ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm]
  iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm]
  iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm]
  _iwl_op_mode_start+0x6f/0xd0 [iwlwifi]
  iwl_opmode_register+0x6a/0xe0 [iwlwifi]
  ? 0xffffffffa0231000
  iwl_mvm_init+0x35/0x1000 [iwlmvm]
  ? 0xffffffffa0231000
  do_one_initcall+0x5a/0x1b0
  ? kmem_cache_alloc+0x1e5/0x2f0
  ? do_init_module+0x1e/0x220
  do_init_module+0x48/0x220
  load_module+0x2602/0x2bc0
  ? __kernel_read+0x145/0x2e0
  ? kernel_read_file+0x229/0x290
  __do_sys_finit_module+0xc5/0x130
  ? __do_sys_finit_module+0xc5/0x130
  __x64_sys_finit_module+0x13/0x20
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f64dda564dd
 Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48
 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd
 RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001
 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002
 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2
 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018
  </TASK>
 Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev
 CR2: 000000000000004f
 ---[ end trace 0000000000000000 ]---

Check the debugfs_dir pointer for an error before using it.

Fixes: 8c082a99 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org
[change to make both conditional]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet.  To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fiSigned-off-by: Johannes Berg <johannes.berg@intel.com>

If CONFIG_RFKILL is not set, the Intel WiFi driver will not build
the iw_mvm driver part due to the missing rfill_soft_blocked()
call. Adding a inline declaration of rfill_soft_blocked() if
CONFIG_RFKILL=n fixes the following error:

drivers/net/wireless/intel/iwlwifi/mvm/mvm.h: In function 'iwl_mvm_mei_set_sw_rfkill_state':
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:2215:38: error: implicit declaration of function 'rfkill_soft_blocked'; did you mean 'rfkill_blocked'? [-Werror=implicit-function-declaration]
 2215 |                 mvm->hw_registered ? rfkill_soft_blocked(mvm->hw->wiphy->rfkill) : false;
      |                                      ^~~~~~~~~~~~~~~~~~~
      |                                      rfkill_blocked
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reported-by: Neill Whillans <neill.whillans@codethink.co.uk>
Fixes: 5bc9a9dd ("rfkill: allow to get the software rfkill state")
Link: https://lore.kernel.org/r/20220218093858.1245677-1-ben.dooks@codethink.co.ukSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-02-28

This series contains updates to igc and e1000e drivers.

Corinna Vinschen ensures release of hardware sempahore on failed
register read in igc_read_phy_reg_gpy().

Sasha does the same for the write variant, igc_write_phy_reg_gpy(). On
e1000e, he resolves an issue with hardware unit hang on s0ix exit
by disabling some bits and LAN connected device reset during power
management flows. Lastly, he allows for TGP platforms to correct its
NVM checksum.

v2: Fix Fixes tag on patch 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update MAC type check e1000_pch_tgp because for e1000_pch_cnp,
NVM checksum update is still possible.
Emit a more detailed warning message.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663
Fixes: 4051f683 ("e1000e: Do not take care about recovery NVM checksum")
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY
LAN connected device (LCD) reset during power management flows. This
fixes possible HW unit hangs on the s0ix exit on some corporate ADL
platforms.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Fixes: 3e55d231 ("e1000e: Add handshake with the CSME to support S0ix")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Suggested-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>