- 01 Oct, 2020 40 commits
-
-
Qian Cai authored
[ Upstream commit e00d996a ] Fields in "struct timer_rand_state" could be accessed concurrently. Lockless plain reads and writes result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). The data races were reported by KCSAN, BUG: KCSAN: data-race in add_timer_randomness / add_timer_randomness write to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 22: add_timer_randomness+0x100/0x190 add_timer_randomness at drivers/char/random.c:1152 add_disk_randomness+0x85/0x280 scsi_end_request+0x43a/0x4a0 scsi_io_completion+0xb7/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 blk_done_softirq+0x181/0x1d0 __do_softirq+0xd9/0x57c irq_exit+0xa2/0xc0 do_IRQ+0x8b/0x190 ret_from_intr+0x0/0x42 cpuidle_enter_state+0x15e/0x980 cpuidle_enter+0x69/0xc0 call_cpuidle+0x23/0x40 do_idle+0x248/0x280 cpu_startup_entry+0x1d/0x1f start_secondary+0x1b2/0x230 secondary_startup_64+0xb6/0xc0 no locks held by swapper/22/0. irq event stamp: 32871382 _raw_spin_unlock_irqrestore+0x53/0x60 _raw_spin_lock_irqsave+0x21/0x60 _local_bh_enable+0x21/0x30 irq_exit+0xa2/0xc0 read to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 2: add_timer_randomness+0xe8/0x190 add_disk_randomness+0x85/0x280 scsi_end_request+0x43a/0x4a0 scsi_io_completion+0xb7/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 blk_done_softirq+0x181/0x1d0 __do_softirq+0xd9/0x57c irq_exit+0xa2/0xc0 do_IRQ+0x8b/0x190 ret_from_intr+0x0/0x42 cpuidle_enter_state+0x15e/0x980 cpuidle_enter+0x69/0xc0 call_cpuidle+0x23/0x40 do_idle+0x248/0x280 cpu_startup_entry+0x1d/0x1f start_secondary+0x1b2/0x230 secondary_startup_64+0xb6/0xc0 no locks held by swapper/2/0. irq event stamp: 37846304 _raw_spin_unlock_irqrestore+0x53/0x60 _raw_spin_lock_irqsave+0x21/0x60 _local_bh_enable+0x21/0x30 irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018 Link: https://lore.kernel.org/r/1582648024-13111-1-git-send-email-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
James Morse authored
[ Upstream commit 54f529a6 ] SDEI has private events that need registering and enabling on each CPU. CPUs can come and go while we are trying to do this. SDEI tries to avoid these problems by setting the reregister flag before the register call, so any CPUs that come online register the event too. Sticking plaster like this doesn't work, as if the register call fails, a CPU that subsequently comes online will register the event before reregister is cleared. Take cpus_read_lock() around the register and enable calls. We don't want surprise CPUs to do the wrong thing if they race with these calls failing. Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Aric Cyr authored
[ Upstream commit 6a6c4a4d ] [Why] Since the i2c payload allocation can fail need to check return codes [How] Clean up i2c payload allocations and check for errors Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
Joshua Aberback <Joshua.Aberback@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 8e84172e ] It's incorrect to check the channel's "busy" state without taking a lock. That shouldn't cause any real troubles, nevertheless it's always better not to have any race conditions in the code. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Amelie Delaunay authored
[ Upstream commit d80cbef3 ] To avoid race with vchan_complete, use the race free way to terminate running transfer. Move vdesc->node list_del in stm32_dma_start_transfer instead of in stm32_mdma_chan_complete to avoid another race in vchan_dma_desc_free_list. Signed-off-by:
Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200129153628.29329-9-amelie.delaunay@st.comSigned-off-by:
-
Thomas Gleixner authored
[ Upstream commit 8a37963c ] If an element is freed via RCU then recursion into BPF instrumentation functions is not a concern. The element is already detached from the map and the RCU callback does not hold any locks on which a kprobe, perf event or tracepoint attached BPF program could deadlock. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.deSigned-off-by:
-
Dave Hansen authored
[ Upstream commit 16171bff ] Alex Shi reported the pkey macros above arch_set_user_pkey_access() to be unused. They are unused, and even refer to a nonexistent CONFIG option. But, they might have served a good use, which was to ensure that the code does not try to set values that would not fit in the PKRU register. As it stands, a too-large 'pkey' value would be likely to silently overflow the u32 new_pkru_bits. Add a check to look for overflows. Also add a comment to remind any future developer to closely examine the types used to store pkey values if arch_max_pkey() ever changes. This boots and passes the x86 pkey selftests. Reported-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.comSigned-off-by:
-
Dan Carpenter authored
[ Upstream commit ef0ed05d ] There was supposed to be a "ret = " assignment here, otherwise the error handling on the next line won't work. Fixes: 64b5a49d ("[media] media: imx: Add Capture Device Interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Amelie Delaunay authored
[ Upstream commit dfc70881 ] To avoid race with vchan_complete, use the race free way to terminate running transfer. Move vdesc->node list_del in stm32_mdma_start_transfer instead of in stm32_mdma_xfer_end to avoid another race in vchan_dma_desc_free_list. Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit 147f1a1f ] The "u" field in the event has three states, -1/0/1. Using u8 however means that comparison with -1 will always fail, so change to signed char. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit fb3063d3 ] From the comment above the definition of the roundup_pow_of_two() macro: The result is undefined when n == 0. Hence only pass positive values to roundup_pow_of_two(). This patch fixes the following UBSAN complaint: UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30 Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 2bbc8353 ] This test places a kprobe to function getname_flags() in the kernel which has the following prototype: struct filename *getname_flags(const char __user *filename, int flags, int *empty) The 'filename' argument points to a filename located in user space memory. Looking at commit 88903c46 ("tracing/probe: Add ustring type for user-space string") the kprobe should indicate that user space memory is accessed. Output before: [root@m35lp76 perf]# ./perf test 66 67 66: Use vfs_getname probe to get syscall args filenames : FAILED! 67: Check open filename arg using perf trace + vfs_getname: FAILED! [root@m35lp76 perf]# Output after: [root@m35lp76 perf]# ./perf test 66 67 66: Use vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok [root@m35lp76 perf]# Comments from Masami Hiramatsu: This bug doesn't happen on x86 or other archs on which user address space and kernel address space is the same. On some arches (ppc64 in this case?) user address space is partially or completely the same as kernel address space. (Yes, they switch the world when running into the kernel) In this case, we need to use different data access functions for each space. That is why I introduced the "ustring" type for kprobe events. As far as I can see, Thomas's patch is sane. Thomas, could you show us your result on your test environment? Comments from Thomas Richter: Test results for s/390 included above. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.comSigned-off-by:
-
Takashi Iwai authored
[ Upstream commit e9a0ef0b ] Some USB-audio descriptors provide a bogus volume range (e.g. volume min and max are identical), which confuses user-space. This patch makes the driver skipping such a control element. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206221 Link: https://lore.kernel.org/r/20200214144928.23628-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 9379df2f ] During the cleanup of the aggregation session, a rx handler (or release timer) on another CPU might still hold a pointer to the reorder buffer and could attempt to release some packets. Clearing pointers during cleanup avoids a theoretical use-after-free bug here. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Ayush Sawal authored
[ Upstream commit 9195189e ] The libkcapi test which causes kernel panic is aead asynchronous vmsplice multiple test. ./bin/kcapi -v -d 4 -x 10 -c "ccm(aes)" -q 4edb58e8d5eb6bc711c43a6f3693daebde2e5524f1b55297abb29f003236e43d -t a7877c99 -n 674742abd0f5ba -k 2861fd0253705d7875c95ba8a53171b4 -a fb7bc304a3909e66e2e0c5ef952712dd884ce3e7324171369f2c5db1adc48c7d This patch avoids dma_mapping of a zero length sg which causes the panic, by using sg_nents_for_len which maps only upto a specific length Signed-off-by:
Ayush Sawal <ayush.sawal@chelsio.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Dinh Nguyen authored
[ Upstream commit cc26ed7b ] do_div() macro to perform u64 division and guards against overflow if the result is too large for the unsigned long return type. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Link: https://lkml.kernel.org/r/20200114160726.19771-1-dinguyen@kernel.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 47340e46 ] The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cnSigned-off-by:
-
James Smart authored
[ Upstream commit 4cb9e1dd ] Coverity reported a memory corruption error for the fdmi attributes routines: CID 15768 [Memory Corruption] Out-of-bounds access on FDMI Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and lpfc_fdmi_reg_port_list structures, a field was placed at the start of payload that may have variable content. The field was given an arbitrary type (uint32_t). The code then uses the field name to derive an address, which it used in things such as memset and memcpy. The memset sizes or memcpy lengths were larger than the arbitrary type, thus coverity reported an error. Fix by replacing the arbitrary fields with the real field structures describing the payload. Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 39c4f1a9 ] The driver is occasionally seeing the following SLI Port error, requiring reset and reinit: Port Status Event: ... error 1=0x52004a01, error 2=0x218 The failure means an RQ timeout. That is, the adapter had received asynchronous receive frames, ran out of buffer slots to place the frames, and the driver did not replenish the buffer slots before a timeout occurred. The driver should not be so slow in replenishing buffers that a timeout can occur. When the driver received all the frames of a sequence, it allocates an IOCB to put the frames in. In a situation where there was no IOCB available for the frame of a sequence, the RQ buffer corresponding to the first frame of the sequence was not returned to the FW. Eventually, with enough traffic encountering the situation, the timeout occurred. Fix by releasing the buffer back to firmware whenever there is no IOCB for the first frame. [mkp: typo] Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.comSigned-off-by:
-
Vasily Averin authored
[ Upstream commit 8d269a8e ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. $ dd if=/sys/fs/selinux/avc/cache_stats # usual output lookups hits misses allocations reclaims frees 817223 810034 7189 7189 6992 7037 1934894 1926896 7998 7998 7632 7683 1322812 1317176 5636 5636 5456 5507 1560571 1551548 9023 9023 9056 9115 0+1 records in 0+1 records out 189 bytes copied, 5,1564e-05 s, 3,7 MB/s $# read after lseek to midle of last line $ dd if=/sys/fs/selinux/avc/cache_stats bs=180 skip=1 dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset 056 9115 <<<< end of last line 1560571 1551548 9023 9023 9056 9115 <<< whole last line once again 0+1 records in 0+1 records out 45 bytes copied, 8,7221e-05 s, 516 kB/s $# read after lseek beyond end of of file $ dd if=/sys/fs/selinux/avc/cache_stats bs=1000 skip=1 dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset 1560571 1551548 9023 9023 9056 9115 <<<< generates whole last line 0+1 records in 0+1 records out 36 bytes copied, 9,0934e-05 s, 396 kB/s https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steve Grubb authored
[ Upstream commit 70b3eeed ] Common Criteria calls out for any action that modifies the audit trail to be recorded. That usually is interpreted to mean insertion or removal of rules. It is not required to log modification of the inode information since the watch is still in effect. Additionally, if the rule is a never rule and the underlying file is one they do not want events for, they get an event for this bookkeeping update against their wishes. Since no device/inode info is logged at insertion and no device/inode information is logged on update, there is nothing meaningful being communicated to the admin by the CONFIG_CHANGE updated_rules event. One can assume that the rule was not "modified" because it is still watching the intended target. If the device or inode cannot be resolved, then audit_panic is called which is sufficient. The correct resolution is to drop logging config_update events since the watch is still in effect but just on another unknown inode. Signed-off-by:
Steve Grubb <sgrubb@redhat.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 86b18aaa ] sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89 ("net: add skb_queue_empty_lockless()"). Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mohan Kumar authored
[ Upstream commit 6d011d50 ] RIRB interrupt status getting cleared after the write pointer is read causes a race condition, where last response(s) into RIRB may remain unserviced by IRQ, eventually causing azx_rirb_get_response to fall back to polling mode. Clearing the RIRB interrupt status ahead of write pointer access ensures that this condition is avoided. Signed-off-by:
Mohan Kumar <mkumard@nvidia.com> Signed-off-by:
Viswanath L <viswanathl@nvidia.com> Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.comSigned-off-by:
-
Zhuang Yanying authored
[ Upstream commit 7df003c8 ] We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: … error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 … Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by:
LinFeng <linfeng23@huawei.com> Signed-off-by:
Zhuang Yanying <ann.zhuangyanying@huawei.com> Signed-off-by:
-
Hillf Danton authored
[ Upstream commit 2a154903 ] Prefetch channel before killing sock in order to fix UAF like BUG: KASAN: use-after-free in l2cap_sock_release+0x24c/0x290 net/bluetooth/l2cap_sock.c:1212 Read of size 8 at addr ffff8880944904a0 by task syz-fuzzer/9751 Reported-by: syzbot+c3c5bdea7863886115dc@syzkaller.appspotmail.com Fixes: 6c08fc89 ("Bluetooth: Fix refcount use-after-free issue") Cc: Manish Mandlik <mmandlik@google.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Steven Price authored
[ Upstream commit c02a9875 ] If walk_pte_range() is called with a 'end' argument that is beyond the last page of memory (e.g. ~0UL) then the comparison between 'addr' and 'end' will always fail and the loop will be infinite. Instead change the comparison to >= while accounting for overflow. Link: http://lkml.kernel.org/r/20191218162402.45610-15-steven.price@arm.comSigned-off-by:
Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 10c8d69f ] If seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. In Aug 2018 NeilBrown noticed commit 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface") "Some ->next functions do not increment *pos when they return NULL... Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps" Described problem is still actual. If you make lseek into middle of last output line following read will output end of last line and whole last line once again. $ dd if=/proc/swaps bs=1 # usual output Filename Type Size Used Priority /dev/dm-0 partition 4194812 97536 -2 104+0 records in 104+0 records out 104 bytes copied $ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice dd: /proc/swaps: cannot skip to specified offset v/dm-0 partition 4194812 97536 -2 /dev/dm-0 partition 4194812 97536 -2 3+1 records in 3+1 records out 131 bytes copied https://bugzilla.kernel.org/show_bug.cgi?id=206283 Link: http://lkml.kernel.org/r/bd8cfd7b-ac95-9b91-f9e7-e8438bd5047d@virtuozzo.comSigned-off-by:
-
Manish Mandlik authored
[ Upstream commit 6c08fc89 ] There is no lock preventing both l2cap_sock_release() and chan->ops->close() from running at the same time. If we consider Thread A running l2cap_chan_timeout() and Thread B running l2cap_sock_release(), expected behavior is: A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb() A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill() B::l2cap_sock_release()->sock_orphan() B::l2cap_sock_release()->l2cap_sock_kill() where, sock_orphan() clears "sk->sk_socket" and l2cap_sock_teardown_cb() marks socket as SOCK_ZAPPED. In l2cap_sock_kill(), there is an "if-statement" that checks if both sock_orphan() and sock_teardown() has been run i.e. sk->sk_socket is NULL and socket is marked as SOCK_ZAPPED. Socket is killed if the condition is satisfied. In the race condition, following occurs: A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb() B::l2cap_sock_release()->sock_orphan() B::l2cap_sock_release()->l2cap_sock_kill() A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill() In this scenario, "if-statement" is true in both B::l2cap_sock_kill() and A::l2cap_sock_kill() and we hit "refcount: underflow; use-after-free" bug. Similar condition occurs at other places where teardown/sock_kill is happening: l2cap_disconnect_rsp()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_disconnect_rsp()->l2cap_sock_close_cb()->l2cap_sock_kill() l2cap_conn_del()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_conn_del()->l2cap_sock_close_cb()->l2cap_sock_kill() l2cap_disconnect_req()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_disconnect_req()->l2cap_sock_close_cb()->l2cap_sock_kill() l2cap_sock_cleanup_listen()->l2cap_chan_close()->l2cap_sock_teardown_cb() l2cap_sock_cleanup_listen()->l2cap_sock_kill() Protect teardown/sock_kill and orphan/sock_kill by adding hold_lock on l2cap channel to ensure that the socket is killed only after marked as zapped and orphan. Signed-off-by:
Manish Mandlik <mmandlik@google.com> Signed-off-by:
-
Doug Smythies authored
[ Upstream commit e749e09d ] Some syntax needs to be more rigorous for python 3. Backwards compatibility tested with python 2.7 Signed-off-by:
Doug Smythies <dsmythies@telus.net> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit af4ddd60 ] test.d/ftrace/func-filter-glob.tc is failing on s390 because it has ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual __raw_spin_lock symbol isn't in the ftrace function list. Change '*aw*lock' to '*spin*lock' which would hopefully match some of the locking functions on all platforms. Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 9a6bed4f ] If the caller passes in a NULL cap_reservation, and we can't allocate one then ensure that we fail gracefully. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Mert Dirik authored
[ Upstream commit 5b362498 ] Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g"). This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507. Signed-off-by:
Mert Dirik <mertdirik@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 40ff1ddb ] The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit cbc3b92c ] I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works. Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.comSigned-off-by:
Josef Bacik <jbacik@fb.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Maxim Mikityanskiy authored
[ Upstream commit 268d3636 ] Currently, kmemdup is applied to the firmware data, and it invokes kmalloc under the hood. The firmware size and patch_length are big (more than PAGE_SIZE), and on some low-end systems (like ASUS E202SA) kmalloc may fail to allocate a contiguous chunk under high memory usage and fragmentation: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8821a_fw.bin kworker/u9:2: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0 <stack trace follows> As firmware load happens on each resume, Bluetooth will stop working after several iterations, when the kernel fails to allocate an order-4 page. This patch replaces kmemdup with kvmalloc+memcpy. It's not required to have a contiguous chunk here, because it's not mapped to the device directly. Signed-off-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by:
-
Oliver O'Halloran authored
[ Upstream commit 4e0942c0 ] Many drivers don't check for errors when they get a 0xFFs response from an MMIO load. As a result after an EEH event occurs a driver can get stuck in a polling loop unless it some kind of internal timeout logic. Currently EEH tries to detect and report stuck drivers by dumping a stack trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump would occur every few seconds if the driver was spinning in a loop. This results in a lot of spurious stack traces in the kernel log. Fix this by limiting it to printing one stack trace for each PE freeze. If the driver is truely stuck the kernel's hung task detector is better suited to reporting the probelm anyway. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Sam Bobroff <sbobroff@linux.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191016012536.22588-1-oohall@gmail.comSigned-off-by:
-
Thomas Richter authored
[ Upstream commit 32dab682 ] Use kzalloc() to allocate auxiliary buffer structure initialized with all zeroes to avoid random value in trace output. Avoid double access to SBD hardware flags. Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Matthias Fend authored
[ Upstream commit cc88525e ] Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits. Signed-off-by:
Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.netSigned-off-by:
-
Bart Van Assche authored
[ Upstream commit eacf36f5 ] Starting execution of a command before tracing a command may cause the completion handler to free data while it is being traced. Fix this race by tracing a command before it is submitted. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.orgReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit e4d2add7 ] Since the lrbp->cmd expression occurs multiple times, introduce a new local variable to hold that pointer. This patch does not change any functionality. Cc: Bean Huo <beanhuo@micron.com> Cc: Can Guo <cang@codeaurora.org> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.orgReviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Can Guo <cang@codeaurora.org> Reviewed-by:
-
