- 26 Aug, 2020 40 commits
-
-
Al Viro authored
commit 52c47969 upstream. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
commit a9ed4a65 upstream. When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by:
-
Li Heng authored
commit 98086df8 upstream. destroy_workqueue() should be called to destroy efi_rts_wq when efisubsys_init() init resources fails. Cc: <stable@vger.kernel.org> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Li Heng <liheng40@huawei.com> Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.comSigned-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Vasant Hegde authored
commit 90a9b102 upstream. As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Massage change log and add PAPR references] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.comSigned-off-by:
-
Tom Rix authored
[ Upstream commit 774d977a ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by:
Tom Rix <trix@redhat.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Haiyang Zhang authored
[ Upstream commit c3d897e0 ] netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the queue number, so the “skb->queue_mapping - 1” will be used. This may cause the last queue of VF not been used. Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called later will get the correct queue number, and VF will be able to use all queues. Fixes: b3bf5666 ("hv_netvsc: defer queue selection to VF") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Wang Hai authored
[ Upstream commit cf96d977 ] Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way, when probe fails, netdev can be freed automatically. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Shay Agroskin authored
[ Upstream commit 63d4a4c1 ] The reset work is scheduled by the timer routine whenever it detects that a device reset is required (e.g. when a keep_alive signal is missing). When releasing device resources in ena_destroy_device() the driver cancels the scheduling of the timer routine without destroying the reset work explicitly. This creates the following bug: The driver is suspended and the ena_suspend() function is called -> This function calls ena_destroy_device() to free the net device resources -> The driver waits for the timer routine to finish its execution and then cancels it, thus preventing from it to be called again. If, in its final execution, the timer routine schedules a reset, the reset routine might be called afterwards,and a redundant call to ena_restore_device() would be made. By changing the reset routine we allow it to read the device's state accurately. This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set before resetting the device and making both the destruction function and the flag check are under rtnl lock. The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction routine. Also surround the flag check with 'likely' because we expect that the reset routine would be called only when ENA_FLAG_TRIGGER_RESET flag is set. The destruction of the timer and reset services in __ena_shutoff() have to stay, even though the timer routine is destroyed in ena_destroy_device(). This is to avoid a case in which the reset routine is scheduled after free_netdev() in __ena_shutoff(), which would create an access to freed memory in adapter->flags. Fixes: 8c5c7abd ("net: ena: add power management ops to the ENA driver") Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Signed-off-by:
-
Jiri Wiesner authored
[ Upstream commit 0410d071 ] When the ARP monitor is used for link detection, ARP replies are validated for all slaves (arp_validate=3) and fail_over_mac is set to active, two slaves of an active-backup bond may get stuck in a state where both of them are active and pass packets that they receive to the bond. This state makes IPv6 duplicate address detection fail. The state is reached thus: 1. The current active slave goes down because the ARP target is not reachable. 2. The current ARP slave is chosen and made active. 3. A new slave is enslaved. This new slave becomes the current active slave and can reach the ARP target. As a result, the current ARP slave stays active after the enslave action has finished and the log is littered with "PROBE BAD" messages: > bond0: PROBE: c_arp ens10 && cas ens11 BAD The workaround is to remove the slave with "going back" status from the bond and re-enslave it. This issue was encountered when DPDK PMD interfaces were being enslaved to an active-backup bond. I would be possible to fix the issue in bond_enslave() or bond_change_active_slave() but the ARP monitor was fixed instead to keep most of the actions changing the current ARP slave in the ARP monitor code. The current ARP slave is set as inactive and backup during the commit phase. A new state, BOND_LINK_FAIL, has been introduced for slaves in the context of the ARP monitor. This allows administrators to see how slaves are rotated for sending ARP requests and attempts are made to find a new active slave. Fixes: b2220cad ("bonding: refactor ARP active-backup monitor") Signed-off-by:
Jiri Wiesner <jwiesner@suse.com> Signed-off-by:
-
David Howells authored
[ Upstream commit 5e0b17b0 ] If an error occurs during the construction of an afs superblock, it's possible that an error occurs after a superblock is created, but before we've created the root dentry. If the superblock has a dynamic root (ie. what's normally mounted on /afs), the afs_kill_super() will call afs_dynroot_depopulate() to unpin any created dentries - but this will oops if the root hasn't been created yet. Fix this by skipping that bit of code if there is no root dentry. This leads to an oops looking like: general protection fault, ... KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] ... RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385 ... Call Trace: afs_kill_super+0x13b/0x180 fs/afs/super.c:535 deactivate_locked_super+0x94/0x160 fs/super.c:335 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598 vfs_get_tree+0x89/0x2f0 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x1387/0x2070 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount fs/namespace.c:3390 [inline] __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 which is oopsing on this line: inode_lock(root->d_inode); presumably because sb->s_root was NULL. Fixes: 0da0b7fd ("afs: Display manually added cells in dynamic root mount") Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Selvin Xavier authored
[ Upstream commit a812f2d6 ] Driver shall add only the kernel qps to the flush list for clean up. During async error events from the HW, driver is adding qps to this list without checking if the qp is kernel qp or not. Add a check to avoid user qp addition to the flush list. Fixes: 942c9b6c ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing") Fixes: c50866e2 ("bnxt_re: fix the regression due to changes in alloc_pbl") Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit ee87e155 ] ../arch/x86/pci/xen.c: In function ‘pci_xen_init’: ../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration] acpi_noirq_set(); Fixes: 88e9ca16 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Cc: linux-pci@vger.kernel.org Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 6163a985 ] efifb_probe() will issue an error message in case the kernel is booted as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set. Fixes: 38ac0287 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB") Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit d85de339 ] If you right-click in the ConfigList window, you will see the following messages in the console: QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906 QObject::connect: (sender name: 'config') Right, there is no such slot in QAction. I think this is a typo of setChecked. Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this. Fixes: d5d973c3 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit fa8de0a3 ] If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by:
-
Jim Mattson authored
[ Upstream commit cb957adb ] See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: b9baba86 ("KVM, pkeys: expose CPUID/CR4 to guest") Cc: Huaitong Han <huaitong.han@intel.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-1-jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jim Mattson authored
[ Upstream commit 427890af ] See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: 0be0226f ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Alex Williamson authored
[ Upstream commit aae7a75a ] The vfio_iommu_replay() function does not currently unwind on error, yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma structure to indicate IOMMU mapping. The IOMMU mappings are torn down when the domain is destroyed, but the other actions go on to cause trouble later. For example, the iommu->domain_list can be empty if we only have a non-IOMMU backed mdev attached. We don't currently check if the list is empty before getting the first entry in the list, which leads to a bogus domain pointer. If a vfio_dma entry is erroneously marked as iommu_mapped, we'll attempt to use that bogus pointer to retrieve the existing physical page addresses. This is the scenario that uncovered this issue, attempting to hot-add a vfio-pci device to a container with an existing mdev device and DMA mappings, one of which could not be pinned, causing a failure adding the new group to the existing container and setting the conditions for a subsequent attempt to explode. To resolve this, we can first check if the domain_list is empty so that we can reject replay of a bogus domain, should we ever encounter this inconsistent state again in the future. The real fix though is to add the necessary unwind support, which means cleaning up the current pinning if an IOMMU mapping fails, then walking back through the r-b tree of DMA entries, reading from the IOMMU which ranges are mapped, and unmapping and unpinning those ranges. To be able to do this, we also defer marking the DMA entry as IOMMU mapped until all entries are processed, in order to allow the unwind to know the disposition of each entry. Fixes: a54eb550 ("vfio iommu type1: Add support for mediated devices") Reported-by:
Zhiyi Guo <zhguo@redhat.com> Tested-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 062fa09f ] When power_up_sst() fails, stream needs to be freed just like when try_module_get() fails. However, current code is returning directly and ends up leaking memory. Fixes: 0121327c ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cnSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit ff69c97e ] For some reason interrupt set and clear register offsets are not set correctly. This patch corrects them! Fixes: 585e881e ("ASoC: codecs: Add msm8916-wcd analog codec") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
-
Heiko Carstens authored
[ Upstream commit fd78c594 ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: 262832bc ("s390/ptrace: add runtime instrumention register get/set") Reported-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Heiko Carstens authored
[ Upstream commit 9eaba29c ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: e4b8b3f3 ("s390: add support for runtime instrumentation") Reported-by:
-
Cong Wang authored
[ Upstream commit 83270702 ] When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 4ca0d9ac ] Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Fugang Duan authored
[ Upstream commit c6165cf0 ] Correct the error path for regulator disable. Fixes: 9269e556 ("net: fec: add phy-reset-gpios PROBE_DEFER check") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Grzegorz Szczurek authored
[ Upstream commit 5b6d4a7f ] Fix the reason of crashing system by add waiting time to finish reset recovery process before starting remove driver procedure. Now VSI is releasing if VSI is not in reset recovery mode. Without this fix it was possible to start remove driver if other processing command need reset recovery procedure which resulted in null pointer dereference. VSI used by the ethtool process has been cleared by remove driver process. [ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6731.508668] #PF: supervisor read access in kernel mode [ 6731.508670] #PF: error_code(0x0000) - not-present page [ 6731.508671] PGD 0 P4D 0 [ 6731.508674] Oops: 0000 [#1] SMP PTI [ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017 [ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e] [ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83 [ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246 [ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007 [ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780 [ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004 [ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000 [ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000 [ 6731.508708] FS: 00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000 [ 6731.508710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0 [ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6731.508715] Call Trace: [ 6731.508734] i40e_vsi_close+0x84/0x90 [i40e] [ 6731.508742] i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e] [ 6731.508749] i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e] [ 6731.508757] i40e_prep_for_reset+0x59/0x130 [i40e] [ 6731.508765] i40e_reconfig_rss_queues+0x5a/0x120 [i40e] [ 6731.508774] i40e_set_channels+0xda/0x170 [i40e] [ 6731.508778] ethtool_set_channels+0xe9/0x150 [ 6731.508781] dev_ethtool+0x1b94/0x2920 [ 6731.508805] dev_ioctl+0xc2/0x590 [ 6731.508811] sock_do_ioctl+0xae/0x150 [ 6731.508813] sock_ioctl+0x34f/0x3c0 [ 6731.508821] ksys_ioctl+0x98/0xb0 [ 6731.508828] __x64_sys_ioctl+0x1a/0x20 [ 6731.508831] do_syscall_64+0x57/0x1c0 [ 6731.508835] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4b816446 ("i40e: Add common function for finding VSI by type") Signed-off-by:
Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Przemyslaw Patynowski authored
[ Upstream commit 4bd5e02a ] Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a760 ("i40e: Add promiscuous on VLAN support") Fixes: 3b120089 ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit 796a58fe ] Most of the DAPM widgets for DSP ASoC components reuse reg field of the widgets for its internal calculations, however these are not real registers. So read/writes to these numbers are not really valid. However ASoC core will read these registers to get default state during startup. With recent changes to ASoC core, every register read/write failures are reported very verbosely. Prior to this fails to reads are totally ignored, so we never saw any error messages. To fix this add dummy read/write function to return default value. Fixes: e3a33673 ("ASoC: qdsp6: q6routing: Add q6routing driver") Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Jan Kara authored
[ Upstream commit bf9a379d ] Currently, add_system_zone() just silently merges two added system zones that overlap. However the overlap should not happen and it generally suggests that some unrelated metadata overlap which indicates the fs is corrupted. We should have caught such problems earlier (e.g. in ext4_check_descriptors()) but add this check as another line of defense. In later patch we also use this for stricter checking of journal inode extent tree. Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.czSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Sandeen authored
[ Upstream commit 5872331b ] If for any reason a directory passed to do_split() does not have enough active entries to exceed half the size of the block, we can end up iterating over all "count" entries without finding a split point. In this case, count == move, and split will be zero, and we will attempt a negative index into map[]. Guard against this by detecting this case, and falling back to split-to-half-of-count instead; in this case we will still have plenty of space (> half blocksize) in each split block. Fixes: ef2b02d3 ("ext34: ensure do_split leaves enough free space in both blocks") Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Reviewed-by:
-
Helge Deller authored
[ Upstream commit a089e3fd ] The kernel signalfd4() syscall returns different error codes when called either in compat or native mode. This behaviour makes correct emulation in qemu and testing programs like LTP more complicated. Fix the code to always return -in both modes- EFAULT for unaccessible user memory, and EINVAL when called with an invalid signal mask. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Laurent Vivier <laurent@vivier.eu> Link: http://lkml.kernel.org/r/20200530100707.GA10159@ls3530.fritz.boxSigned-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit bd72866b ] These accessors must be used to read/write a big-endian bus. The value returned or written is native-endian. However, these accessors are defined using be{16,32}_to_cpu() or cpu_to_be{16,32}() to make the endian conversion but these expect a __be{16,32} when none is present. Keeping them would need a force cast that would solve nothing at all. So, do the conversion using swab{16,32}, like done in asm-generic for similar situations. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Eiichi Tsukata authored
[ Upstream commit 96cf2a2c ] If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN shows the following warning: UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23 member access within null pointer of type 'struct xfs_kobj' Call Trace: dump_stack+0x10e/0x195 ubsan_type_mismatch_common+0x241/0x280 __ubsan_handle_type_mismatch_v1+0x32/0x40 init_xfs_fs+0x12b/0x28f do_one_initcall+0xdd/0x1d0 do_initcall_level+0x151/0x1b6 do_initcalls+0x50/0x8f do_basic_setup+0x29/0x2b kernel_init_freeable+0x19f/0x20b kernel_init+0x11/0x1e0 ret_from_fork+0x22/0x30 Fix it by checking parent_kobj before the code accesses its member. Signed-off-by:
Eiichi Tsukata <devel@etsukata.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> [darrick: minor whitespace edits] Signed-off-by:
-
Gaurav Singh authored
[ Upstream commit d8300206 ] Haven't reproduced this issue. This PR is does a minor code cleanup. Signed-off-by:
Gaurav Singh <gaurav1086@gmail.com> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit 481a0d74 ] The loop may exist if vq->broken is true, virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split will return NULL, so virtnet_poll will reschedule napi to receive packet, it will lead cpu usage(si) to 100%. call trace as below: virtnet_poll virtnet_receive virtqueue_get_buf_ctx virtqueue_get_buf_ctx_packed virtqueue_get_buf_ctx_split virtqueue_napi_complete virtqueue_poll //return true virtqueue_napi_schedule //it will reschedule napi to fix this, return false if vq is broken in virtqueue_poll. Signed-off-by:
Mao Wenan <wenan.mao@linux.alibaba.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.comSigned-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Javed Hasan authored
[ Upstream commit ec007ef4 ] In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except for PTR_ERR. However, in some cases it didn't. This fix is to call fc_frame_free(fp) before function returns. Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.comReviewed-by:
Girish Basrur <gbasrur@marvell.com> Reviewed-by:
Santosh Vernekar <svernekar@marvell.com> Reviewed-by:
Saurav Kashyap <skashyap@marvell.com> Reviewed-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
Javed Hasan <jhasan@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Srinivas Pandruvada authored
[ Upstream commit 4daca379 ] The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update this MSR via BIOS settings on some systems or can use msr tools to update. Also some systems boot with value = 0. This results in display of cpufreq/cpuinfo_max_freq wrong. This value will be equal to cpufreq/base_frequency, even though turbo is enabled. But platform will still function normally in HWP mode as we get max 1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used to calculate cpu->pstate.turbo_freq, which is used for to set policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate is used. For example to set policy->max. To fix this, also update cpu->pstate.turbo_pstate when updating cpu->pstate.turbo_freq. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Xiubo Li authored
[ Upstream commit a7caa88f ] If the ceph_mdsc_init() fails, it will free the mdsc already. Reported-by: syzbot+b57f46d8d6ea51960b8c@syzkaller.appspotmail.com Signed-off-by:
Xiubo Li <xiubli@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Zhe Li authored
[ Upstream commit 798b7347 ] The log of UAF problem is listed below. BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc Read of size 4 by task rm/8283 ============================================================================= BUG kmalloc-32 (Tainted: P B O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0 0xb0bba6ef jffs2_write_dirent+0x11c/0x9c8 [jffs2] __slab_alloc.isra.21.constprop.25+0x2c/0x44 __kmalloc+0x1dc/0x370 jffs2_write_dirent+0x11c/0x9c8 [jffs2] jffs2_do_unlink+0x328/0x5fc [jffs2] jffs2_rmdir+0x110/0x1cc [jffs2] vfs_rmdir+0x180/0x268 do_rmdir+0x2cc/0x300 ret_from_syscall+0x0/0x3c INFO: Freed in 0x205b age=3054364 cpu=0 pid=0 0x2e9173 jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_add_fd_to_list+0x138/0x1dc [jffs2] jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2] jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2] jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2] jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2] kthread+0x1a8/0x1b0 ret_from_kernel_thread+0x5c/0x64 Call Trace: [c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable) [c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2] [c17dddd0] [c026da04] vfs_rmdir+0x180/0x268 [c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300 [c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c The root cause is that we don't get "jffs2_inode_info.sem" before we scan list "jffs2_inode_info.dents" in function jffs2_rmdir. This patch add codes to get "jffs2_inode_info.sem" before we scan "jffs2_inode_info.dents" to slove the UAF problem. Signed-off-by:
Zhe Li <lizhe67@huawei.com> Reviewed-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit f959b5d0 ] xfs_trans_dqresv is the function that we use to make reservations against resource quotas. Each resource contains two counters: the q_core counter, which tracks resources allocated on disk; and the dquot reservation counter, which tracks how much of that resource has either been allocated or reserved by threads that are working on metadata updates. For disk blocks, we compare the proposed reservation counter against the hard and soft limits to decide if we're going to fail the operation. However, for inodes we inexplicably compare against the q_core counter, not the incore reservation count. Since the q_core counter is always lower than the reservation count and we unlock the dquot between reservation and transaction commit, this means that multiple threads can reserve the last inode count before we hit the hard limit, and when they commit, we'll be well over the hard limit. Fix this by checking against the incore inode reservation counter, since we would appear to maintain that correctly (and that's what we report in GETQUOTA). Signed-off-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
