- 23 Sep, 2015 40 commits
-
-
Siva Mannem authored
Signed-off-by:
Siva Mannem <siva.mannem.lnx@gmail.com> Signed-off-by:
Scott Feldman <sfeldma@gmail.com> Acked-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Premkumar Jonnala <pjonnala@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Scott Feldman authored
Add a timer to each rocker switch to do FDB entry cleanup by ageing out expired entries. The timer scheduling algo is copied from the bridge driver, for the most part, to keep the firing of the timer to a minimum. Signed-off-by:
-
Scott Feldman authored
Follow-up patcheset will allow user to change ageing_time, but for now just hard-code it to a fixed value (the same value used as the default for the bridge driver). Signed-off-by:
-
Scott Feldman authored
Signed-off-by:
-
Scott Feldman authored
We'll need more info from rocker_port than just pport when we age out fdb entries, so store rocker_port rather than pport in each fdb entry. Signed-off-by:
-
Scott Feldman authored
The entry is touched once when created, and touched again for each update. The touched time is used to calculate FDB entry age. Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Minor cls_bpf updates Some minor updates resp. follow-ups on cls_bpf, please see individual patches for details. Will follow with the iproute2 patch after this series. ==================== Signed-off-by: -
Daniel Borkmann authored
Jamal suggested to further limit the currently allowed subset of opcodes that may be used by a direct action return code as the intention is not to replace the full action engine, but rather to have a minimal set that can be used in the fast-path on things like ingress for some features that cls_bpf supports. Classifiers can, of course, still be chained together that have direct action mode with those that have a full exec pass. For more complex scenarios that go beyond this minimal set here, the full tcf_exts_exec() path must be used. Suggested-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Daniel Borkmann authored
The binding to a particular classid was so far always mandatory for cls_bpf, but it doesn't need to be. Therefore, lift this restriction as similarly done in other classifiers. Only a couple of qdiscs make use of class from the tcf_result, others don't strictly care, so let the user choose his needs (those that read out class can handle situations where it could be NULL). An explicit check for tcf_unbind_filter() is also not needed here, as the previous r->class was 0, so the xchg() will return that and therefore a callback to the qdisc's unbind_tcf() is skipped. Signed-off-by:
-
Daniel Borkmann authored
In commit 43388da42a49 ("cls_bpf: introduce integrated actions") we have added TCA_BPF_FLAGS. We can also retrieve this information from the prog, dump it back to user space as well. It's useful in tc when displaying/dumping filter info. Also, remove tp from cls_bpf_prog_from_efd(), came in as a conflict from a rebase and it's unused here (later work may add it along with a real user). Signed-off-by: -
git://git.pengutronix.de/git/mgr/linuxDavid S. Miller authored
Michael Grzeschik says: ==================== ARCNET: refactoring and cleanup This series cleans up the code in drivers/net/arcnet and include/uapi/linux/if_arcnet.h . It doesn't change the runtime behaviour of the code. Its only purpose is to improve the code maintenance and readability. ==================== Signed-off-by: -
Daniel Borkmann authored
Similarly as already the case in bpf_redirect()/skb_do_redirect() pair, let the stack deal with devs that are !IFF_UP. dev_forward_skb() as well as dev_queue_xmit() will free the skb and increment drop counter internally in such cases, so we can spare the condition in bpf_clone_redirect(). Signed-off-by:
-
Tom Herbert authored
In rt6_info_hash_nhsfn replace the custom hashing over flowi6 that is using xor with a call to common function get_hash_from_flowi6. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Michael Grzeschik authored
This patch cleans the capmode protocol module. It removes the obsolete function arcnet_cap_init and replaces printk with pr_info. Signed-off-by:Michael Grzeschik <m.grzeschik@pengutronix.de>
-
Michael Grzeschik authored
This patch moves the module_init and module_exit patches to the end of the file. It also replaces the printk with pr_info. Signed-off-by: -
Michael Grzeschik authored
This patch replaces all magic numbers in the driver with proper named macros. For the case of XTOcfg and STARTIOcmd it introduces the new macros. Signed-off-by: -
Michael Grzeschik authored
This patch changes the macro definitions to match the C99 formating. This improves the readability. Signed-off-by: -
Joe Perches authored
The word length macros are unused. Remove them. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Deduplicate the COM9026 registers. Signed-off-by:
-
Joe Perches authored
It's clearer to use function pointer calls directly instead of the macro indirections of ARCRESET, ACOMMAND, ASTATUS, and AINTMASK. Remove the now unused macros too. Signed-off-by:
-
Joe Perches authored
Simplify and make consistent the current uses of readb/writeb by using the newly introduced arcnet_<I/O> equivalents. Signed-off-by:
-
Joe Perches authored
Simplify and make consistent the current uses of readb/writeb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by:
-
Joe Perches authored
Use the same indirection as the other arcnet_<I/O> macros. Neither of these new macros add the BUS_ALIGN use for 8 bit devices on 16 bit busses. Signed-off-by:
-
Joe Perches authored
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by:
-
Joe Perches authored
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate Signed-off-by:
-
Joe Perches authored
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets There is an register offset, 8, that is unnamed and used as-is. o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate o Create static inline com20020_set_subaddress for the SET_SUBADR macro There is an unused arcnet config entry CONFIGSA100_CT6001 which added a special #define BUS_ALIGN which was introduced but never used in fullhist git tree commit 22cfce4b82b0 ("[ARCNET]: Fixes.") in Nov 2004 for Linux v2.6.10. This BUS_ALIGN #define tries to allow 8 bit devices to work on a 16 bit bus by aligning addresses to 16 bit boundaries. Move this currently unused CONFIG_SA1100_CT6001 BUS_ALIGN macro from com20020.h to arcdevice.h. Signed-off-by: -
Joe Perches authored
arcnet uses an I/O scheme which can align I/O addresses to word boundaries on different architectures. Add arcnet specific macros which can hide this alignment calculation. Signed-off-by:
-
Joe Perches authored
Might as well be specific about the use of this array. Add a commment questioning the indexing too. Signed-off-by:
-
Joe Perches authored
These #include files don't need to be in the include/linux directory as they can be local to drivers/net/arcnet/ Move them and update the #include statements. Update the MAINTAINERS file pattern by deleting arcdevice from the NETWORKING block as arcnet is currently unmaintained. Signed-off-by:
-
Joe Perches authored
Just neatening. Signed-off-by:
-
Joe Perches authored
Make sure the arguments are tested appropriately when not using this function. Signed-off-by:
-
Joe Perches authored
Use direct tests of pointer instead. Signed-off-by:
-
Joe Perches authored
Move the assignment above the if like general kernel style. Signed-off-by:
-
Joe Perches authored
Alloc failures have generic stack dumps so these are redundant. Signed-off-by:
-
Joe Perches authored
Use the normal kernel style for EXPORT_SYMBOL. Signed-off-by:
-
Joe Perches authored
Use the more current logging style. Remove #define VERSION, use pr_info normally. Add pr_fmt with "arcnet:" prefixes and KBUILD_MODNAME. Signed-off-by:
-
Joe Perches authored
These macros don't actually represent BUG uses but are more commonly used as logging macros, so use a more kernel style macro. Convert the BUGMSG from a netdev_ like use to actually use netdev_<level>. Signed-off-by:
-
Joe Perches authored
Don't hide what should be obvious. Make the macro a simple test instead of using if and test. Signed-off-by:
-
Joe Perches authored
These macros are actually printk and pr_cont uses with a flag. Add a new BUGLVL_TEST macro which is just the "should use" test and not an odd "if (<foo>)" macro to simplify uses in a new patch. Signed-off-by:
-
Joe Perches authored
Conformity can be useful. Signed-off-by:
-
