- 08 Aug, 2014 18 commits
-
-
Damien Lespiau authored
Not all those fields are valid on a given platform. Make it explicit. Unions could also be used, but were cluttering some code paths with if/else ladders. v2: Don't use anonymous unions (Daniel) Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
CHV supports DP training pattern 3. Add the required stuff. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ville Syrjälä authored
Split some WM debug prints to multiple lines. This shouldn't hurt grappability since the important part is at the start and the rest is just repeated stuff for each pipe. Signed-off-by:
-
Rafael Barbalho authored
According to the specifications bit 6 is actually valid in the stride register. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Rafael Barbalho <rafael.barbalho@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Add the TX wells for port D. The Punit subsystem numbers are a total guess at this time. Also I'm not sure these even exist. Certainly the Punit in current hardware doesn't deal with these. Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Add the TX wells for ports B and C just like on VLV. Again Punit doesn't seem ready (or the wells don't even exist anymore) so leave it iffed out. Signed-off-by:
-
Ville Syrjälä authored
CHV has a power well for each pipe. Add the code to deal with them. The Punit in current hardware doesn't seem ready for this yet, so leave it iffed out. Signed-off-by:
-
Ville Syrjälä authored
Not sure if it's still there since chv has per-pipe power wells. At least with current Punit this doesn't work. Also the display irq handling would need to be adjusted for pipe C. So leave the code iffed out for now. Signed-off-by:
-
Ville Syrjälä authored
Both VLV and CHV handle the cmnreset stuff in the power well code now, so intel_reset_dpio() is no longer needed. Signed-off-by:
-
Ville Syrjälä authored
CHV has two display PHYs so there are also two cmnlane power wells. Add the approriate code to power the wells up/down. Like on VLV we do the cmnreset assert/deassert and the DPLL refclock enabling at approriate times. This code actually works on my bsw. Signed-off-by:
-
Ville Syrjälä authored
Add chv_power_wells[] so we can start to build up the power well support for chv. Just the "always on" well there initialy. Signed-off-by:
-
Ville Syrjälä authored
Share the waitqueue that drm_irq uses when performing the vblank evade trick for atomic pipe updates. v2: Keep intel_pipe_handle_vblank() (Chris) Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
Add a small static inline helper to grab the vblank wait queue based on the drm_crtc. This is useful for drivers to do internal vblank waits using wait_event() & co. v2: Pimp commit message (Daniel) Add kernel doc (Daniel) Suggested-by: -
Vandana Kannan authored
Adding relevant read out comparison code, in check_crtc_state, for the new member of crtc_config, dp_m2_n2, which was introduced to store link_m_n values for a DP downclock mode (if available). Suggested by Daniel. v2: Changed patch title. Daniel's review comments incorporated. Added relevant state readout code for M2_N2. dp_m2_n2 comparison to be done only when high RR is not in use (This is because alternate m_n register programming will be done only when low RR is being used). v3: Modified call to get_m2_n2 which had dp_m_n as param by mistake. Compare dp_m_n and dp_m2_n2 for gen 7 and below. compare the structures based on DRRS state for gen 8 and above. Save and restore M2 N2 registers for gen 7 and below v4: For Gen>=8, check M_N registers against dp_m_n and dp_m2_n2 as there is only one set of M_N registers v5: Removed the chunk which saves and restores M2_N2 registers. Modified get_m_n() to get M2_N2 registers as well. Modified the macro which compares hw.dp_m_n against sw.dp_m2_n2/sw.dp_m_n for gen > 8. v6: Added check to compare dp_m2_n2 only when DRRS is enabled v7: Modified drrs check to use has_drrs v8: Add has_drrs check before reading M2_N2 registers Signed-off-by:
Vandana Kannan <vandana.kannan@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Vandana Kannan authored
For Gen < 8, set M2_N2 registers on every mode set. This is required to make sure M2_N2 registers are set during boot, resume from sleep for cross- checking the state. The register is set only if DRRS is supported. v2: Patch rebased v3: Daniel's review comments - Removed HAS_DRRS(dev) and added bool has_drrs to pipe_config to track drrs support v4: Jesse's review comments - Made changes to set m2_n2 in intel_dp_set_m_n() Signed-off-by:
-
Rodrigo Vivi authored
This reverts commit 521e62e4. Although POST_SYNC brought a bit of stability to Semaphores on BDW it didn't solved all issues and some hungs can still occour when semaphores are enabled on BDW. Also some sloweness can be found on some igt tests, althoguth it apparently doesn't affect real workloads. Besides that, no real performance gain was found on our tests with different and even multiple workloads. Let's disable it again for now. At least until we are sure it is safe to re-enable it. Signed-off-by:
-
Jiri Kosina authored
Withtout this, ring initialization fails reliabily during resume with [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head ffffff8804 tail 00000000 start 000e4000 This is not a complete fix, but it is verified to make the ring initialization failures during resume much less likely. We were not able to root-cause this bug (likely HW-specific to Gen4 chips) yet. This is therefore used as a ducttape before problem is fully understood and proper fix created, so that people don't suffer from completely unusable systems in the meantime. The discussion and debugging is happening at https://bugs.freedesktop.org/show_bug.cgi?id=76554Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: stable@vger.kernel.org Signed-off-by:
-
Rafael Barbalho authored
This particular nasty presented itself while trying to register the intelfb device (intel_fbdev.c). During the process of registering the device the driver will disable the crtc via i9xx_crtc_disable. These will also disable the panel using the generic mipi panel functions in dsi_mod_vbt_generic.c. The stale MIPI generic data sequence pointers would cause a crash within those functions. However, all of this is happening while console_lock is held from do_register_framebuffer inside fbcon.c. Which means that you got kernel log and just the device appearing to reboot/hang for no apparent reason. The fault started from the FB_EVENT_FB_REGISTERED event using the fb_notifier_call_chain call in fbcon.c. This regression has been introduced in commit d3b542fc Author: Shobhit Kumar <shobhit.kumar@intel.com> Date: Mon Apr 14 11:00:34 2014 +0530 drm/i915: Add parsing support for new MIPI blocks in VBT Cc: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by:
Shobhit Kumar <shobhit.kumar@intel.com> [danvet: Add regression citation.] Cc: stable@vger.kernel.org Signed-off-by:
-
- 07 Aug, 2014 17 commits
-
-
Deepak S authored
We might be leaving the PGU Frequency (and thus vnn) high during the suspend. Flusing the delayed work queue should take care of this. Signed-off-by:
Deepak S <deepak.s@linux.intel.com> Signed-off-by:
-
Rodrigo Vivi authored
BDW has many other Display Engine interrupts and GT interrupts registers. Collecting it properly on gpu_error_state. On debugfs all was properly listed already but besides we were also listing old DEIER and GTIER that doesn't exist on BDW anymore. This was causing unclaimed register messages v2: Fix small issues of first version and don't read DEIER regs when pipe's power well is disabled v3: bikeshed accepted: use enum pipe pipe instead of int i for pipe interection v4: Ben notice previous version was checking for display_power_enabled without using propper locks. Using _unlocked version isn't reliable and we cannot get this registers when power well is off. So let's avoid getting all DE_IER per pipe for now. If someone think this is an useful information it can be added later. v5: Ben: put back debugfs stuff that might be coverred by pm_get and use gen >= 8 trying to predict future. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81701 Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
(v3) Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Mika Kuoppala authored
If the actual head has progressed forward inside a batch (request), don't accumulate hangcheck score. As the hangcheck score in increased only by acthd jumping backwards, the result is that we only declare an active batch as stuck if it is trapped inside a loop. Or that the looping will dominate the batch progression so that it overcomes the bonus that forward progress gives. v2: Improved commit message (Chris Wilson) Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> [danvet: s/active_loop/active (loop)/ as requested by Chris.] Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Kenneth Graunke authored
On Broadwell, any PIPE_CONTROL with the "State Cache Invalidate" bit set must be preceded by a PIPE_CONTROL with the "CS Stall" bit set. Documented on the BSpec 3D workarounds page. Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> [vsyrjala: add chv w/a note too] Signed-off-by:
-
Kenneth Graunke authored
We'll want to reuse this for a workaround. Signed-off-by:
-
Ville Syrjälä authored
The DDL registers can hold 7bit numbers. Make the most of those seven bits by adjusting the threshold where we switch between the 64 vs. 32 precision multipliers. Also we compute 'entries' to make the decision about precision, and then we recompute the same value to calculate the actual drain latency. Just use the already calculate 'entries' there. Reviewed-by:
-
Zhenyu Wang authored
Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Rodrigo Vivi authored
GTIER and DEIER doesn't have same interface on HSW so this "or" operation makes the information provided useless. v2: since we have gtier variable already let's split for everybody and avoid the strange | op. Also avoid overriding the value that was set for vlv. In this case I believe that we should reorganize the whole function, but I'll respect the comment that ask to not touch the order and let this organization work to be done later. v3: moving VLV check to the right place. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: -
Daniel Vetter authored
Users often can't do anything about this since their vendors stopped providing BIOS updates. Also we seem to be able to hack around it with increased latency values, and thus far the only reports have been for screens with really high resolutions. So tune it down to a level where only developers can see it. Also drop some of the end-user fluff. Reviewed-by:
-
Daniel Vetter authored
Power users spot this and then get adventurous and try to adjust module driver options. Nothing good ever came out of that, so hide it better. Reviewed-by:
-
Daniel Vetter authored
Since I've reworked psr support to no longer require x-tiling we don't check any state protected by the Giant GEM Lock. So drop that check. Also boo for lockdep_assert_held for not yelling when lockdep is disabled. Cc: Paulo Zanoni <przanoni@gmail.com> Reported-by:
Paulo Zanoni <przanoni@gmail.com> Acked-by:
-
Rodrigo Vivi authored
Fix signal_offset when recording semaphore state on BDW. Reviewed-by:
-
Imre Deak authored
Just like during booting the BIOS can leave the VDD bit enabled after system resume. So apply the same state sanitization there too. This fixes a problem where after resume the port power domain refcount gets unbalanced. v2: - unchanged v3: - call edp sanitizing from the encoder reset handler (Daniel) Reported-and-tested-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Shobhit Kumar authored
Check in vlv_crtc_clock_get if DPLL is enabled before calling dpio read. It will not be enabled for DSI and avoid dpio read WARN dumps. Absence of ->get_config was causing other WARN dumps as well. Update dpll_hw_state as well correctly v2: Address review comments by Daniel - Check if DPLL is enabled rather than checking pipe output type - set adjusted_mode->flags to 0 in compute_config rather than using pipe_config->quirks - Add helper function in intel_dsi_pll.c and use that in intel_dsi.c - updated dpll_hw_state correctly - Updated commit message and title v3: Address review comments by Imre - Proper masking of P1, M1 fields while computing divisors - assert in case of bpp mismatch - guard for divide by 0 while computing pclk - Use ARRAY_SIZE instead of direct calculation Signed-off-by: -
Imre Deak authored
This will be needed by an upcoming patch too that needs to sanitize the VDD state during resume. The additional async disabling is only needed for the resume path, here it doesn't make a difference since we enable VDD right after the sanitize call. v2: - don't set intel_dp ptr for non-eDP encoders (Ville) Signed-off-by:
-
Shobhit Kumar authored
Ensure that the DSI packets for a particular sequence are completely sent before going ahead in the enabling or disabling of the panel Signed-off-by:
-
Pavel Machek authored
Gcc warns that addr might be used uninitialized. It may not, but I see why gcc gets confused. Additionally, hiding code with side-effects inside WARN_ON() argument seems uncool, so I moved it outside. Signed-off-by:
Pavel Machek <pavel@ucw.cz> [danvet: Add obligatory /* shuts up gcc */ comment.] Signed-off-by:
-
- 05 Aug, 2014 5 commits
-
-
Daniel Vetter authored
Signed-off-by: -
Tetsuo Handa authored
Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free() are currently doing GFP_KERNEL allocation. But these functions did not get updated to receive gfp_t argument. This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions, and removes the deadlock warning. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Tetsuo Handa authored
While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL allocation, ttm_pool_shrink_scan() does not do it. This can result in stack overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to memory pressure. shrink_slab() => ttm_pool_shrink_scan() => ttm_page_pool_free() => kmalloc(GFP_KERNEL) => shrink_slab() => ttm_pool_shrink_scan() => ttm_page_pool_free() => kmalloc(GFP_KERNEL) Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does. Signed-off-by: -
Tetsuo Handa authored
I can observe that RHEL7 environment stalls with 100% CPU usage when a certain type of memory pressure is given. While the shrinker functions are called by shrink_slab() before the OOM killer is triggered, the stall lasts for many minutes. One of reasons of this stall is that ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with _manager->lock held causes someone (including kswapd) to deadlock when these functions are called due to memory pressure. This patch changes "mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to avoid deadlock. Signed-off-by:
-
Tetsuo Handa authored
We can use "unsigned int" instead of "atomic_t" by updating start_pool variable under _manager->lock. This patch will make it possible to avoid skipping when choosing a pool to shrink in round-robin style, after next patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork). Signed-off-by:
-
