In suspend-resume sequence, the OS could attempt to initialize the controller
before it is ready, check for POST state before going ahead.
Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge networking fixes from David Miller:

 1) Revert Johannes Berg's genetlink locking fix, because it causes
    regressions.

    Johannes and Pravin Shelar are working on fixing things properly.

 2) Do not drop ipv6 ICMP messages without a redirected header option,
    they are legal.  From Duan Jiong.

 3) Missing error return propagation in probing of via-ircc driver.
    From Alexey Khoroshilov.

 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when
    initializing, from Peter Wu.

 5) realtek phy driver programs wrong interrupt status bit, from
    Giuseppe CAVALLARO.

 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn.

 7) Bridge code uses wrong bitmap length, from Toshiaki Makita.

 8) SFC driver uses wrong indexes to look up MAC filters, from Ben
    Hutchings.

 9) Don't pass stack buffers into usb control operations in hso driver,
    from Daniel Gimpelevich.

10) Multiple ipv6 fragmentation headers in one packet is illegal and
    such packets should be dropped, from Hannes Frederic Sowa.

11) When TCP sockets are "repaired" as part of checkpoint/restart, the
    timestamp field of SKBs need to be refreshed otherwise RTOs can be
    wildly off.  From Andrey Vagin.

12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in
    hostp driver.  From Dan Carpenter.

13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes
    it does.  From Dan Carpenter.

14) Fix regression in wireless SME disconnects, from Johannes Berg.

15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from
    Jussi Kivilinna.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  ipv4: expose IPV4_DEVCONF
  ipv6: handle Redirect ICMP Message with no Redirected Header option
  be2net: fix disabling TX in be_close()
  Revert "genetlink: fix family dump race"
  hso: Fix stack corruption on some architectures
  hso: Earlier catch of error condition
  sfc: Fix lookup of default RX MAC filters when steered using ethtool
  bridge: Use the correct bit length for bitmap functions in the VLAN code
  packet: restore packet statistics tp_packets to include drops
  net: phy: rtl8211: fix interrupt on status link change
  r8169: remember WOL preferences on driver load
  via-ircc: don't return zero if via_ircc_open() failed
  macvtap: Ignore tap features when VNET_HDR is off
  macvtap: Correctly set tap features when IFF_VNET_HDR is disabled.
  macvtap: simplify usage of tap_features
  tcp: set timestamps for restored skb-s
  bnx2x: set VF DMAE when first function has 0 supported VFs
  bnx2x: Protect against VFs' ndos when SR-IOV is disabled
  bnx2x: prevent VF benign attentions
  bnx2x: Consider DCBX remote error
  ...

Merge fixes from Andrew Morton:
 "A few fixes.  One is a licensing change and I don't do licensing, so
  please eyeball that one"

Licensing eye-balled.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/lz4: correct the LZ4 license
  memcg: get rid of swapaccount leftovers
  nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
  nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
  drivers/platform/olpc/olpc-ec.c: initialise earlier

The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Acked-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
  pointless, so don't do it   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The swapaccount kernel parameter without any values has been removed by
commit a2c8990a ("memsw: remove noswapaccount kernel parameter") but
it seems that we didn't get rid of all the left overs.

Make sure that menuconfig help text and kernel-parameters.txt are clear
about value for the paramter and remove the stalled comment which is not
very much useful on its own.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Gergely Risko <gergely@risko.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Being a low-level component, various drivers (e.g.  olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe.  Therefore the OLPC EC driver must be initialised before other
drivers try to use it.  This was the case until it was recently moved
out of arch/x86 and restructured around commits ac250415 ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6 ("x86:
OLPC: switch over to using new EC driver on x86").

Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.

Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC.  The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IP sends device configuration (see inet_fill_link_af) as an array
in the netlink information, but the indices in that array are not
exposed to userspace through any current santized header file.

It was available back in 2.6.32 (in /usr/include/linux/sysctl.h)
but was broken by:
  commit 02291680
  Author: Eric W. Biederman <ebiederm@xmission.com>
  Date:   Sun Feb 14 03:25:51 2010 +0000

    net ipv4: Decouple ipv4 interface parameters from binary sysctl numbers

Eric was solving the sysctl problem but then the indices were re-exposed
by a later addition of devconf support for IPV4

  commit 9f0f7272
  Author: Thomas Graf <tgraf@infradead.org>
  Date:   Tue Nov 16 04:32:48 2010 +0000

    ipv4: AF_INET link address family

Putting them in /usr/include/linux/ip.h seemed the logical match
for the DEVCONF_ definitions for IPV6 in /usr/include/linux/ip6.h
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rfc 4861 says the Redirected Header option is optional, so
the kernel should not drop the Redirect Message that has no
Redirected Header option. In this patch, the function
ip6_redirect_no_header() is introduced to deal with that
condition.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>

commit fba87559 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow.  But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge in a fix for RX MAC address filter programming bug in the sfc
driver.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 58ad436f.

It turns out that the change introduced a potential deadlock
by causing a locking dependency with netlink's cb_mutex. I
can't seem to find a way to resolve this without doing major
changes to the locking, so revert this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull x86 platform driver fixes from Matthew Garrett:
 "Three trivial fixes - the first reverts a patch that's broken some
  other devices (again - I'm trying to figure out a clean way to
  implement this), the other two fix minor issues in the sony-laptop
  driver"

* 'linux-next' of git://cavan.codon.org.uk/platform-drivers-x86:
  Revert "hp-wmi: Enable hotkeys on some systems"
  sony-laptop: Fix reporting of gfx_switch_status
  sony-laptop: return a negative error code in sonypi_compat_init()

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes for 3.11 are still trickling in.  These are:
   - A couple of fixes for older OMAP platforms
   - Another few fixes for at91 (lateish due to European summer
     vacations)
   - A late-found problem with USB on Tegra, fix is to keep VBUS
     regulator on at all times
   - One fix for Exynos 5440 dealing with CPU detection
   - One MAINTAINERS update"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: always enable USB VBUS regulators
  ARM: davinci: nand: specify ecc strength
  ARM: OMAP: rx51: change musb mode to OTG
  ARM: OMAP2: fix musb usage for n8x0
  MAINTAINERS: Update email address for Benoit Cousson
  ARM: at91/DT: fix at91sam9n12ek memory node
  ARM: at91: add missing uart clocks DT entries
  ARM: SAMSUNG: fix to support for missing cpu specific map_io
  ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C

Pull device tree fix from Rob Herring:
 "For DT unflattening, add missing memory initialization.

  This is needed for arches like PPC that use memblock_alloc.  This
  appears to have been an issue for some time, but is a somewhat limited
  usecase of OF_DYNAMIC"

* tag 'devicetree-fixes-for-3.11' of git://sources.calxeda.com/kernel/linux:
  of: fdt: fix memory initialization for expanded DT

Pull device mapper fix from Mike Snitzer:
 "A patch to fix dm-cache-policy-mq's remove_mapping() conflict with
  sparc32"

* tag 'dm-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: avoid conflicting remove_mapping() in mq policy

This is the updated version of df54d6fa ("x86 get_unmapped_area():
use proper mmap base for bottom-up direction") that only randomizes the
mmap base address once.
Signed-off-by: Radu Caragea <sinaelgl@gmail.com>
Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Adrian Sendroiu <molecula2788@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit df54d6fa.

The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.

In particular, the MATLAB Java runtime seems to be unhappy. See

  https://bugzilla.kernel.org/show_bug.cgi?id=60774

So we'll want to apply the random offset only once, and Radu has a patch
for that.  Revert this older commit in order to apply the other one.
Reported-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a regression exposed during the merge window by commit
9f310ded "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that
USB VBUS doesn't get turned on, so USB devices are not detected. This
affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to
which the SSD is connected) and the external port(s) on Seaboard/
Springbank and Whistler.

The Tegra DT as written in v3.11 allows two paths to enable USB VBUS:

1) Via the legacy DT binding for the USB controller; it can directly
   acquire a VBUS GPIO and activate it.

2) Via a regulator for VBUS, which is referenced by the new DT binding
   for the USB controller.

Those two methods both use the same GPIO, and hence whichever of the
USB controller and regulator gets probed first ends up owning the GPIO.
In practice, the USB driver only supports path (1) above, since the
patches to support the new USB binding are not present until v3.12:-(

In practice, the regulator ends up being probed first and owning the
GPIO. Since nothing enables the regulator (the USB driver code is not
yet present), the regulator ends up being turned off. This originally
caused no problem, because the polarity in the regulator definition was
incorrect, so attempting to turn off the regulator actually turned it
on, and everything worked:-(

However, when testing the new USB driver code in v3.12, I noticed the
incorrect polarity and fixed it in commit 9f310ded "ARM: tegra: fix VBUS
regulator GPIO polarity in DT". In the context of v3.11, this patch then
caused the USB VBUS to actually turn off, which broke USB ports with VBUS
control. I got this patch included in v3.11-rc1 since it fixed a bug in
device tree (incorrect polarity specification), and hence was suitable to
be included early in the rc series. I evidently did not test the patch at
all, or correctly, in the context of v3.11, and hence did not notice the
issue that I have explained above:-(

Fix this by making the USB VBUS regulators always enabled. This way, if
the regulator owns the GPIO, it will always be turned on, even if there
is no USB driver code to request the regulator be turned on. Even
ignoring this bug, this is a reasonable way to configure the HW anyway.

If this patch is applied to v3.11, it will cause a couple pretty trivial
conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since
the context right above the added lines changed in patches destined for
v3.12.
Reported-by: Kyle McMartin <kmcmarti@redhat.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

As Sergei Shtylyov explained in the #mipslinux IRC channel:
[Mon 2013-08-19 12:28:21 PM PDT] <headless> guys, are you sure it's not "DMA off stack" case?
[Mon 2013-08-19 12:28:35 PM PDT] <headless> it's a known stack corruptor on non-coherent arches
[Mon 2013-08-19 12:31:48 PM PDT] <DonkeyHotei> headless: for usb/ehci?
[Mon 2013-08-19 12:34:11 PM PDT] <DonkeyHotei> headless: explain
[Mon 2013-08-19 12:35:38 PM PDT] <headless> usb_control_msg() (or other such func) should not use buffer on stack. DMA from/to stack is prohibited
[Mon 2013-08-19 12:35:58 PM PDT] <headless> and EHCI uses DMA on control xfers (as well as all the others)
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to get an interface specification if we know it's the
wrong one.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.

I putted some debug extensions to property_proc_show(..) :
..
+       if (OF_IS_DYNAMIC(pp))
+               pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+       if (OF_IS_DETACHED(pp))
+               pr_err("DEBUG: xxx : OF_IS_DETACHED\n");

when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)

If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().
Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <rob.herring@calxeda.com>

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - On ARM did not have balanced calls to get/put_cpu.
 - Fix to make tboot + Xen + Linux correctly.
 - Fix events VCPU binding issues.
 - Fix a vCPU online race where IPIs are sent to not-yet-online vCPU.

* tag 'stable/for-linus-3.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/smp: initialize IPI vectors before marking CPU online
  xen/events: mask events when changing their VCPU binding
  xen/events: initialize local per-cpu mask for all possible events
  x86/xen: do not identity map UNUSABLE regions in the machine E820
  xen/arm: missing put_cpu in xen_percpu_init

Pull MIPS fix from Ralf Baechle:
 "Just a single patch which fixes a special case in the MIPS FPU
  emulator which is always required, even on CPUs with FPU.  There is
  the rare special case that an FPU (or certain other instructions) in a
  branch delay slot is causing an exception and then the branch
  instruction will need to be emulated by the kernel before resuming
  execution.  This is working great except if the branch instruction is
  an Octeon BBIT instruction.

  The boring disclaimer - all MIPS defconfigs build tested and no
  regressions and runtime tested on Octeon, no known issues"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Handle OCTEON BBIT instructions in FPU emulator.

Pull arm64 perf fixes from Catalin Marinas:
 "Perf backend fixes for arm64 where the user can cause kernel panic
  (discovered with Vince's fuzzing tool)"

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: perf: fix event validation for software group leaders
  arm64: perf: fix array out of bounds access in armpmu_map_hw_event()

Pull kvm fixes from Paolo Bonzini:
 "Fixes for ARM and aarch64.

  This pull request is coming a bit later than I would have preferred,
  because I and Gleb happened to have holidays around the same weeks of
  August...  sorry about that"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: ARM: Squash len warning
  arm64: KVM: use 'int' instead of 'u32' for variable 'target' in kvm_host.h.
  arm64: KVM: add missing dsb before invalidating Stage-2 TLBs
  arm64: KVM: perform save/restore of PAR_EL1
  arm64: KVM: fix 2-level page tables unmapping
  ARM: KVM: Fix unaligned unmap_range leak
  ARM: KVM: Fix 64-bit coprocessor handling

Merge tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 "Fixes for the sunxi (AllWinner) pin control driver.  This was a new
  driver in this merge window, so some post-merge hardening is
  happening"

[ I had completely missed this pull request for some reason, it was sent
  over a week ago but my mailbox is chaotic ]

* tag 'pinctrl-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: Add spinlocks
  pinctrl: sunxi: Fix gpio_set behaviour
  pinctrl: sunxi: Read register before writing to it in irq_set_type

commit 385904f8 ('sfc: Don't use
efx_filter_{build,hash,increment}() for default MAC filters') used the
wrong name to find the index of default RX MAC filters at insertion/
update time.  This could result in memory corruption and would in any
case silently fail to update the filter.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

The VLAN code needs to know the length of the per-port VLAN bitmap to
perform its most basic operations (retrieving VLAN informations, removing
VLANs, forwarding database manipulation, etc). Unfortunately, in the
current implementation we are using a macro that indicates the bitmap
size in longs in places where the size in bits is expected, which in
some cases can cause what appear to be random failures.
Use the correct macro.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Regarding the iwlwifi bits, Johannes says:

"We revert an rfkill bugfix that unfortunately caused more bugs, shuffle
some code to avoid touching the PCIe device before it's enabled and
disconnect if firmware fails to do our bidding. I also have Stanislaw's
fix to not crash in some channel switch scenarios."

As for the mac80211 bits, Johannes says:

"This time, I have one fix from Dan Carpenter for users of
nl80211hdr_put(), and one fix from myself fixing a regression with the
libertas driver."

Along with the above...

Dan Carpenter fixes some incorrectly placed "address of" operators
in hostap that caused copying of junk data.

Jussi Kivilinna corrects zd1201 to use an allocated buffer rather
than the stack for a URB operation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

getsockopt PACKET_STATISTICS returns tp_packets + tp_drops. Commit
ee80fbf3 ("packet: account statistics only in tpacket_stats_u")
cleaned up the getsockopt PACKET_STATISTICS code.
This also changed semantics. Historically, tp_packets included
tp_drops on return. The commit removed the line that adds tp_drops
into tp_packets.

This patch reinstates the old semantics.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is to fix a problem in the rtl8211 where the driver
wasn't properly enabled the interrupt on link change status.
it has to enable the ineterrupt on the bit 10 in the register 18
(INER).
Reported-by: Sharma Bhupesh <B45370@freescale.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Included change:
- Check if the skb has been correctly prepared before going on

Do not clear Broadcast/Multicast/Unicast Wake Flag or LanWake in
Config5. This is necessary to preserve WOL state when the driver is
loaded. Although the r8168 vendor driver does not write Config5 (it has
been commented out), Hayes Wang from Realtek said that masking bits like
this is more sensible.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If via_ircc_open() fails, data structures of the driver left uninitialized,
but probe (via_init_one()) returns zero. That can lead to null pointer dereference
in via_remove_one(), since it does not check drvdata for NULL.

The patch implements proper error code propagation.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the user turns off VNET_HDR support on the
macvtap device, there is no way to provide any
offload information to the user.  So, it's safer
to ignore offload setting then depend on the user
setting them correctly.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the user turns off IFF_VNET_HDR flag, attempts to change
offload features via TUNSETOFFLOAD do not work.  This could cause
GSO packets to be delivered to the user when the user is
not prepared to handle them.

To solve, allow processing of TUNSETOFFLOAD when IFF_VNET_HDR is
disabled.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In macvtap, tap_features specific the features of that the user
has specified via ioctl().  If we treat macvtap as a macvlan+tap
then we could all the tap a pseudo-device and give it other features
like SG and GSO.  Then we can stop using the features of lower
device (macvlan) when forwarding the traffic the tap.

This solves the issue of possible checksum offload mismatch between
tap feature and macvlan features.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the repair mode is turned off, the write queue seqs are
updated so that the whole queue is considered to be 'already sent.

The "when" field must be set for such skb. It's used in tcp_rearm_rto
for example. If the "when" field isn't set, the retransmit timeout can
be calculated incorrectly and a tcp connected can stop for two minutes
(TCP_RTO_MAX).
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>