- 08 Dec, 2009 3 commits
-
-
Randy Dunlap authored
miropcm20 uses ALSA (snd_) interfaces from the SND_MIRO driver, so it should depend on SND. (selecting SND_MIRO when CONFIG_SND is not enabled is a problem.) drivers/built-in.o: In function `vidioc_s_ctrl': radio-miropcm20.c:(.text+0x227499): undefined reference to `snd_aci_cmd' drivers/built-in.o: In function `vidioc_s_frequency': radio-miropcm20.c:(.text+0x227574): undefined reference to `snd_aci_cmd' radio-miropcm20.c:(.text+0x227588): undefined reference to `snd_aci_cmd' drivers/built-in.o: In function `pcm20_init': radio-miropcm20.c:(.init.text+0x2a784): undefined reference to `snd_aci_get_aci' miropcm20 selects SND_MIRO but SND_ISA may be not enabled, so also select SND_ISA so that the snd-miro driver will be built. Otherwise there are missing symbols: ERROR: "snd_opl4_create" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_pcm" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_timer" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_create" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_mixer" [sound/isa/opti9xx/snd-miro.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tobias Hansen authored
I added the product IDs of the new revisions of the devices, so owners can test whether this suffices to make them work. Patched against ALSA snapshot 20091207. Signed-off-by: Tobias Hansen <Tobias.Hansen at physik.uni-hamburg.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Krzysztof Helt authored
The PnP data on the OPTI931 and OPTI933 contains io port range for the MC indirect registers. Use the PnP range instead of hardwired value 0xE0E. Also, request region of MC indirect registers so it is marked as used to other drivers (this was missing previously). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Dec, 2009 6 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Mark Brown authored
The symbols aren't declared and don't need to be exported, they go along with the device structure. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ben Dooks <ben-linux@fluff.org>
-
Joonyoung Shim authored
This renames from a character / to : of controls. A / occurs below error messages. ASoC: Failed to create IN2RP/VXRP debugfs file ASoC: Failed to create IN2LP/VXRN debugfs file Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 Dec, 2009 6 commits
-
-
Ondrej Zary authored
When primary AC97 is not found, don't fail with tons of AC97 errors. Assume that the card is SF64-PCR (tuner-only). This makes the SF64-PCR radio card work "out of the box". Also fixes a bug that can cause an oops here: if (tea575x_tuner > 0 && (tea575x_tuner & 0x000f) < 4) { when tea575x_tuner == 16, it passes this check and causes problems a couple lines below: chip->tea.ops = &snd_fm801_tea_ops[(tea575x_tuner & 0x000f) - 1]; Tested with SF64-PCR, but I don't have any of those sound or sound+radio cards to test if I didn't break anything. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ondrej Zary authored
Fix mute state reporting in tea575x-tuner. This fixes mute function in kradio on SF64-PCR radio card. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Manuel Lauss authored
free the allocated pcm platform device in the error path. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Manuel Lauss authored
platform_device_unregister() frees resources for us, no need to do it explicitly. Fixes an oops when machine code removes the soc-audio device. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
The previous hack for replacing the codec name give memory leaks at error paths. This patch fixes them. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 02 Dec, 2009 1 commit
-
-
Krzysztof Helt authored
Remove snd_opti9xx fields which are indirect arguments to the snd_opti9xx_configure(). Pass these values as function arguments. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 01 Dec, 2009 9 commits
-
-
Takashi Iwai authored
Now snd_ac97_pcm_open() is called with the exactly same arguments for both playback and capture directions. Remove the unneeded check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Alexey Fisher authored
Muse Pocket use brocken mixer names, so alsamixer and PA can't use it correctly This patch add quirk to overwirte default mixers. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Takashi Iwai authored
HP dv3 requires position_fix=1. Reference: Novell bnc#555935 https://bugzilla.novell.com/show_bug.cgi?id=555935Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and speaker pins properly. Add the pinfix entry for that. Reference: Novell bnc#557403 https://bugzilla.novell.com/show_bug.cgi?id=557403Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
- 30 Nov, 2009 10 commits
-
-
Takashi Iwai authored
The NID 0x1a of Conexant 5047 chip is a mic boost volume only with the output amp unlike 5045 chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Russell King authored
pcm->r[1].slots is the double rate slot information, not the capture information. For capture, 'pcm' will already be the capture ac97 pcm structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Russell King authored
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Daniel Mack authored
ALSA's for-2.6.33 branch has a new source argument to snd_soc_dai_set_pll(). Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This patch add support runtime PM. Driver callbacks for Runtime PM are empty because the device registers are always re-initialized after pm_runtime_get_sync(). The Runtime PM functions replaces the clock framework module stop bit handling in this driver. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
MSI Wind U115 seems to require position_fix=1 explicitly. Otherwise it screws up PulseAudio. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Krzysztof Helt authored
The PCM12 and PCM20 can be set into the ISA PnP mode. The PCM12 PnP was sold as the PnP device. Add code to handle detection of these cards using ISA PnP framework. Tested on the PCM20 in PnP mode. The PCM12 PnP has the same MS Windows INF file except for a card name displayed for user. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Krzysztof Helt authored
Separate common probing code in order to use it for PnP probing. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 27 Nov, 2009 5 commits
-
-
Mark Brown authored
-
Daniel Mack authored
Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Anuj Aggarwal authored
This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Takashi Iwai authored
The commit fe3e78e0 ASoC: Factor out snd_soc_init_card() removed the error paths that are still valid for wm97* codecs, causing the compile errors like sound/soc/codecs/wm9705.c:399: error: label 'reset_err' used but not defined sound/soc/codecs/wm9712.c:687: error: label 'reset_err' used but not defined sound/soc/codecs/wm9713.c:1237: error: label 'reset_err' used but not defined Revert the removed error path codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-