- 16 Sep, 2007 3 commits
-
-
Satyam Sharma authored
net/sched/sch_cbq.c: In function 'cbq_enqueue': net/sched/sch_cbq.c:383: warning: 'ret' may be used uninitialized in this function has been verified to be a bogus case. So let's shut it up. Signed-off-by:
Satyam Sharma <satyam@infradead.org> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Adit Ranadive authored
From: Adit Ranadive <adit.262@gmail.com> Signed-off-by:
-
Jiri Kosina authored
The commit 95c385 broke proper source address selection for cases in which there is a address which is makred 'deprecated'. The commit mistakenly changed ifa->flags to ifa_result->flags (probably copy/paste error from a few lines above) in the 'Rule 3' address selection code. The patch restores the previous RFC-compliant behavior. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
- 15 Sep, 2007 2 commits
-
-
YOSHIFUJI Hideaki authored
Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
- 14 Sep, 2007 3 commits
-
-
YOSHIFUJI Hideaki authored
Signed-off-by:
-
Jamal Hadi Salim authored
(with no apologies to C Heston) On Mon, 2007-10-09 at 21:00 +0800, Herbert Xu wrote: On Sun, Sep 02, 2007 at 01:11:29PM +0000, Christian Kujau wrote: > > > > after upgrading to 2.6.23-rc5 (and applying davem's fix [0]), lockdep > > was quite noisy when I tried to shape my external (wireless) interface: > > > > [ 6400.534545] FahCore_78.exe/3552 just changed the state of lock: > > [ 6400.534713] (&dev->ingress_lock){-+..}, at: [<c038d595>] > > netif_receive_skb+0x2d5/0x3c0 > > [ 6400.534941] but this lock took another, soft-read-irq-unsafe lock in the > > past: > > [ 6400.535145] (police_lock){-.--} > > This is a genuine dead-lock. The police lock can be taken > for reading with softirqs on. If a second CPU tries to take > the police lock for writing, while holding the ingress lock, > then a softirq on the first CPU can dead-lock when it tries > to get the ingress lock. Signed-off-by:Jamal Hadi Salim <hadi@cyberus.ca> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
1) Comments suggest that setting optlen to zero will unbind the socket from whatever device it might be attached to. This hasn't been the case since at least 2.2.x because the first thing this function does is return -EINVAL if 'optlen' is less than sizeof(int). This check also means that passing in a two byte string doesn't work so well. It's almost as if this code was testing with "eth?" patterned strings and nothing else :-) Fix this by breaking the logic of this facility out into a seperate function which validates optlen more appropriately. The optlen==0 and small string cases now work properly. 2) We should reset the cached route of the socket after we have made the device binding changes, not before. Reported by Ben Greear. Signed-off-by:
-
- 13 Sep, 2007 7 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "usb-storage: implement autosuspend" USB: disable autosuspend by default for non-hubs
-
Jens Axboe authored
There's a race condition in blk_queue_end_tag() for shared tag maps, users include stex (promise supertrak thingy) and qla2xxx. The former at least has reported bugs in this area, not sure why we haven't seen any for the latter. It could be because the window is narrow and that other conditions in the qla2xxx code hide this. It's a real bug, though, as the stex smp users can attest. We need to ensure two things - the tag bit clearing needs to happen AFTER we cleared the tag pointer, as the tag bit clearing/setting is what protects this map. Secondly, we need to ensure that the visibility of the tag pointer and tag bit clear are ordered properly. [ I removed the SMP barriers - "test_and_clear_bit()" already implies all the required barriers. -- Linus ] Also see http://bugzilla.kernel.org/show_bug.cgi?id=7842Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
aherrman@arcor.de authored
This fixes a problem introduced with commit b5f2f4d1 The commit added a wrong chip definition to radeonfb which causes a blank console on my Laptop if radeonfb is loaded. The patch - renames PCI_CHIP_RS485_5975 to PCI_CHIP_RS482_5975 - corrects the chip family (RS480 instead of R300) for 0x5975 - ensures that PCI IDs are in ascending order in ati_ids.h Signed-off-by:
Andreas Herrmann <aherrman@arcor.de> Tentatively-acked-by:
Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
aherrman@arcor.de authored
As observed with various Radeon X300 cards console goes blank without that fix. Acked-by:
-
Greg Kroah-Hartman authored
This reverts commit 8dfe4b14. There are a number of issues still remaining in usb-storage autosuspend, so, to be safe, we need to revert this for now. Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as965) disables autosuspend by default for all USB devices other than hubs. We are seeing too many devices that can't suspend or resume properly, the blacklist is growing unreasonably quickly, and this sort of thing should be handled in userspace. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by:
-
- 12 Sep, 2007 25 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Move serial_dev_init to device_initcall() [POWERPC] Enable GENERIC_ISA_DMA if FSL_ULI1575 to fix compile issue [POWERPC] cpm2: Fix off-by-one error in setbrg(). [PPC] 8xx: Fix r3 trashing due to 8MB TLB page instantiation [POWERPC] 8{5,6}xx: Fix build issue with !CONFIG_PCI
-
Rusty Russell authored
One of the very first things lguest_init() does is a memcpy. On Athlon/Duron/K7 or CyrixIII/VIA-C3 or Geode GX/LX, this tries to use MMX. memcpy -> _mmx_memcpy -> kernel_fpu_begin -> clts -> paravirt_ops.clts But we haven't set paravirt_ops.clts yet, so we do the native version and crash. The simplest solution is to use __memcpy. Thanks to Michael Rasenberger for the bug report. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Olof Johansson authored
With the I/O space rewrite by BenH, the legacy_serial serial_dev_init() initcall is now called before I/O space is setup, but it's dependent on it being available. Since there's no way to make dependencies between initcalls, we'll just have to move it to device_initcall(). Yes, it's suboptimal but I'm not aware of any better solution at this time, and it fixes a regression from 2.6.22. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Andi Kleen authored
Fix a compile error when the directory above the kernel source contains a file named "kernel". Originally from Ben LaHaise, modified based on feedback from Sam Ravnborg Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Ben LaHaise <bcrl@kvack.org> Signed-off-by:
-
Andi Kleen authored
AK: Removed the unlikelies because gcc heuristics default to unlikely AK: for test == NULL and for negative returns. Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Andi Kleen authored
vdso vgetns() didn't mask the time source offset calculation, which could lead to time problems with 32bit HPET. Add the masking. Thanks to Chuck Ebbert for tracking this down. Signed-off-by:
-
git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Add missing include for leds.h
-
Paul Mackerras authored
Commit f629307c introduced uses of kernel_termios_to_user_termios_1 and user_termios_to_kernel_termios_1 on all architectures. However, powerpc, s390, avr32 and frv don't currently define those functions since their termios struct didn't need to be changed when the arbitrary baud rate stuff was added, and thus the kernel won't currently build on those architectures. This adds definitions of kernel_termios_to_user_termios_1 and user_termios_to_kernel_termios_1 to include/asm-generic/termios.h which are identical to kernel_termios_to_user_termios and user_termios_to_kernel_termios respectively. The definitions are the same because the "old" termios and "new" termios are in fact the same on these architectures (which are the same ones that use asm-generic/termios.h). Signed-off-by:
-
Kumar Gala authored
Since the ULI1575 has a ISA bus we need to enable the generic ISA dma support for drivers that might expect it. Without this we get compile errors like the following: ound/built-in.o: In function `claim_dma_lock': /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' sound/built-in.o: In function `release_dma_lock': /home/galak/git/linux-8572/include/asm/dma.h:195: undefined reference to `dma_spin_lock' sound/built-in.o: In function `claim_dma_lock': /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' /home/galak/git/linux-8572/include/asm/dma.h:189: undefined reference to `dma_spin_lock' sound/built-in.o:/home/galak/git/linux-8572/include/asm/dma.h:195: more undefined references to `dma_spin_lock' follow make: *** [.tmp_vmlinux1] Error 1 Signed-off-by:Kumar Gala <galak@kernel.crashing.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BLUETOOTH]: Fix non-COMPAT build of hci_sock.c
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix booting on V100 systems.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: usbtouchscreen - correctly set 'phys' Input: i8042 - add HP Pavilion DV4270ca to the MUX blacklist Input: i8042 - fix modpost warning Input: add more Braille keycodes
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
On the root PCI bus, the OBP device tree lists device 3 twice. Once as 'pm' and once as 'lomp'. Everything goes downhill from there. Ignore the second instance to workaround this. Thanks to Kövedi_Krisztián for the bug report and testing the fix. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Fix calculation of i_blocks during truncate [PATCH] ocfs2: Fix a wrong cluster calculation. [PATCH] ocfs2: fix mount option parsing ocfs2: update docs for new features
-
Adrian Bunk authored
SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y. Additionally, this patch fixes whitespace instead of tabs at the SERIAL_MUX_CONSOLE option. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Krzysztof Halasa authored
Intel framebuffer mis-calculated pixel clocks. The pixel clock (and thus both H and V sync) will be slower than requested, so if you set the minimum allowed the display may not sync. In case of really old CRT display it could theoretically damage it. I'm using it with PAL TV (using RGB input - SCART connector) and the bug prevented it from working at all (TV requirements are more strict and made the bug visible). Signed-off-by:
Krzysztof Halasa <khc@pm.waw.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Christoph Lameter authored
This was posted on Aug 28 and fixes an issue that could cause troubles when slab caches >=128k are created. http://marc.info/?l=linux-mm&m=118798149918424&w=2 Currently we simply add the debug flags unconditional when checking for a matching slab. This creates issues for sysfs processing when slabs exist that are exempt from debugging due to their huge size or because only a subset of slabs was selected for debugging. We need to only add the flags if kmem_cache_open() would also add them. Create a function to calculate the flags that would be set if the cache would be opened and use that function to determine the flags before looking for a compatible slab. [akpm@linux-foundation.org: fixlets] Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Andrew Morton authored
Revert commit 656dad31 Author: Ingo Molnar <mingo@elte.hu> Date: Sat Feb 10 01:46:36 2007 -0800 [PATCH] highmem: catch illegal nesting Catch illegally nested kmap_atomic()s even if the page that is mapped by the 'inner' instance is from lowmem. This avoids spuriously zapped kmap-atomic ptes and turns hard to find crashes into clear asserts at the bug site. Problem is, a get_zeroed_page(GFP_KERNEL) from interrupt context will trigger this check if non-irq code on this CPU holds a KM_USER0 mapping. But that get_zeroed_page() will never be altering the kmap slot anyway due to the GFP_KERNEL. Cc: Christoph Lameter <clameter@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Tony Breeds authored
Seems to me that this timer will only get started on platforms that say they don't want it? Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Gabriel Paubert <paubert@iram.es> Cc: Zachary Amsden <zach@vmware.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <johnstul@us.ibm.com> Signed-off-by:
-
Pavel Emelyanov authored
The inode->i_flock list contains the leases, flocks and posix locks in the specified order. However, the flocks are added in the head of this list thus hiding the leases from F_GETLEASE command, from time_out_leases() and other code that expects the leases to come first. The following example will demonstrate this: #define _GNU_SOURCE #include <unistd.h> #include <fcntl.h> #include <stdio.h> #include <sys/file.h> static void show_lease(int fd) { int res; res = fcntl(fd, F_GETLEASE); switch (res) { case F_RDLCK: printf("Read lease\n"); break; case F_WRLCK: printf("Write lease\n"); break; case F_UNLCK: printf("No leases\n"); break; default: printf("Some shit\n"); break; } } int main(int argc, char **argv) { int fd, res; fd = open(argv[1], O_RDONLY); if (fd == -1) { perror("Can't open file"); return 1; } res = fcntl(fd, F_SETLEASE, F_WRLCK); if (res == -1) { perror("Can't set lease"); return 1; } show_lease(fd); if (flock(fd, LOCK_SH) == -1) { perror("Can't flock shared"); return 1; } show_lease(fd); return 0; } The first call to show_lease() will show the write lease set, but the second will show no leases. Fix the flock adding so that the leases always stay in the head of this list. Found during making the flocks pid-namespaces aware. Signed-off-by:Pavel Emelyanov <xemul@openvz.org> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by:
-
Zhenyu Wang authored
G33 has 1MB GTT table range. Fix GTT mapping in case like 512MB aperture size. Signed-off-by:
Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by:
Dave Airlie <airlied@linux.ie> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Zhenyu Wang authored
G33 GTT stolen memory is below graphics data stolen memory and be seperate, so don't subtract it in stolen mem counting. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Alexey Dobriyan authored
Taneli Vähäkangas <vahakang@cs.helsinki.fi> reported that commit 786d7e16 aka "Fix rmmod/read/write races in /proc entries" broke SBCL + SLIME combo. The old code in do_select() used DEFAULT_POLLMASK, if couldn't find ->poll handler. The new code makes ->poll always there and returns 0 by default, which is not correct. Return DEFAULT_POLLMASK instead. Steps to reproduce: install emacs, SBCL, SLIME emacs M-x slime in *inferior-lisp* buffer [watch it doing "Connecting to Swank on port X.."] Please, apply before 2.6.23. P.S.: why SBCL can't just read(2) /proc/cpuinfo is a mystery. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: T Taneli Vahakangas <vahakang@cs.helsinki.fi> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
