- 06 Feb, 2013 31 commits
-
-
Frank Schaefer authored
- move the bit shifting of width+height values inside the function - fix the debug message format and output values - add comment about the size limit (e.g. EM277x supports >2MPix) - make void, because error checking is incomplete and we never check the returned value (we would continue anyway) Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Federico Vaga authored
All drivers which use this subdevice use also the control framework. The v4l2_subdev_core_ops operations {query/g_/s_}ctrl are useless because device drivers will inherit controls from this subdevice. Signed-off-by:Federico Vaga <federico.vaga@gmail.com> Signed-off-by:
-
Federico Vaga authored
This patch re-write the driver and use the videobuf2 interface instead of the old videobuf. Moreover, it uses also the control framework which allows the driver to inherit controls from its subdevice (ADV7180). Finally the driver does not implement custom file operation but it uses the generic ones from videobuf2 and v4l2_fh Signed-off-by:
Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Frank Schaefer authored
The buffer ioctls (VIDIOC_REQBUFS, VIDIOC_QUERYBUF, VIDIOC_QBUF, VIDIOC_DQBUF, VIDIOC_EXPBUF, VIDIOC_CREATE_BUFS, VIDIOC_PREPARE_BUF) are not applicable for radio devices. Hence, they should be set valid only for non-radio devices in determine_valid_ioctls(). Signed-off-by:
-
Sylwester Nawrocki authored
Clear the proper array when deregistering FIMC-LITE devices. Now fimc[] array is erroneously accessed instead of fimc_lite[] and fimc_md_unregister_entities() function call can result in an oops from NULL pointer dereference, since fmd->fimc[] is cleared earlier. This might happen in normal conditions when the driver's probing is deferred and then retried. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Kamil Debski authored
In some circumstances after issuing the V4L2_ENC_CMD_STOP the application could freeze. This patch prevents this behavior. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Move e_clkput label after the clk_disable() call so a not acquired clock is not attempted to be disabled. This fixes runtime warnings like: s5p-mipi-csis 11880000.csis: failed to get clock: sclk_csis ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:478 clk_disable+0x24/0x34() Modules linked in: [<c001603c>] (unwind_backtrace+0x0/0x13c) from [<c0022060>] (warn_slowpath_common+0x54/0x64) [<c0022060>] (warn_slowpath_common+0x54/0x64) from [<c002208c>] (warn_slowpath_null+0x1c/0x24) [<c002208c>] (warn_slowpath_null+0x1c/0x24) from [<c033f868>] (clk_disable+0x24/0x34) [<c033f868>] (clk_disable+0x24/0x34) from [<c02feff8>] (s5pcsis_probe+0x25c/0x4c8) [<c02feff8>] (s5pcsis_probe+0x25c/0x4c8) from [<c0268e34>] (platform_drv_probe+0x18/0x1c) [<c0268e34>] (platform_drv_probe+0x18/0x1c) from [<c0267700>] (driver_probe_device+0xa4/0x368) [<c0267700>] (driver_probe_device+0xa4/0x368) from [<c0267a50>] (__driver_attach+0x8c/0x90) [<c0267a50>] (__driver_attach+0x8c/0x90) from [<c0265c94>] (bus_for_each_dev+0x60/0x8c) [<c0265c94>] (bus_for_each_dev+0x60/0x8c) from [<c02665e8>] (bus_add_driver+0x20c/0x2d4) [<c02665e8>] (bus_add_driver+0x20c/0x2d4) from [<c0268064>] (driver_register+0x78/0x194) [<c0268064>] (driver_register+0x78/0x194) from [<c0008668>] (do_one_initcall+0x34/0x188) [<c0008668>] (do_one_initcall+0x34/0x188) from [<c03de57c>] (kernel_init+0x180/0x2f0) [<c03de57c>] (kernel_init+0x180/0x2f0) from [<c000f0d8>] (ret_from_fork+0x14/0x3c) ---[ end trace 0c5a55345c42530b ]--- Signed-off-by:
-
Laurent Pinchart authored
Those optional operations are used to release and reacquire the queue lock when videobuf2 needs to perform operations that sleep for a long time, such as waiting for a buffer to be complete. Implement them to avoid blocking qbuf or streamoff calls when a dqbuf is in progress. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Thierry Reding authored
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Acked-by:
-
Peter Senna Tschudin authored
This patch introduces the use of IS_ENABLED() macro. For example, replacing: #if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) with: #if IS_ENABLED(CONFIG_I2C) All changes made by this patch respect the same replacement pattern. Reported-by:
Peter Senna Tschudin <peter.senna@gmail.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Peter Senna Tschudin authored
replace: #if defined(CONFIG_MEDIA_TUNER_TEA5761) || \ defined(CONFIG_MEDIA_TUNER_TEA5761_MODULE) with: #if IS_ENABLED(CONFIG_MEDIA_TUNER_TEA5761) This change was made for: CONFIG_MEDIA_TUNER_TEA5761 Also replaced: #if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE)) with: #if IS_ENABLED(CONFIG_I2C) Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_I2C) || \ defined(CONFIG_I2C_MODULE) with: #if IS_ENABLED(CONFIG_I2C) This change was made for: CONFIG_I2C Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_I2C) || \ defined(CONFIG_I2C_MODULE) with: #if IS_ENABLED(CONFIG_I2C) This change was made for: CONFIG_I2C Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_VIDEOBUF2_VMALLOC) || \ defined(CONFIG_VIDEOBUF2_VMALLOC_MODULE) with: #if IS_ENABLED(CONFIG_VIDEOBUF2_VMALLOC) This change was made for: CONFIG_VIDEOBUF2_VMALLOC, CONFIG_VIDEOBUF2_DMA_CONTIG, CONFIG_VIDEOBUF2_DMA_SG Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT_EVDEV) || \ defined(CONFIG_INPUT_EVDEV_MODULE) with: #if IS_ENABLED(CONFIG_INPUT_EVDEV) This change was made for: CONFIG_INPUT_EVDEV, CONFIG_DVB_SP8870 Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_VIDEO_SAA7134_DVB) || \ defined(CONFIG_VIDEO_SAA7134_DVB_MODULE) with: #if IS_ENABLED(CONFIG_VIDEO_SAA7134_DVB) This change was made for: CONFIG_VIDEO_SAA7134_DVB Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_VIDEO_CX88_DVB) || \ defined(CONFIG_VIDEO_CX88_DVB_MODULE) with: #if IS_ENABLED(CONFIG_VIDEO_CX88_DVB) This change was made for: CONFIG_VIDEO_CX88_DVB, CONFIG_VIDEO_CX88_BLACKBIRD, CONFIG_VIDEO_CX88_VP3054 Reported-by: -
Scott Jiang authored
Mark current frame as error frame when ppi error interrupt report fifo error. Member next_frm in struct bcap_device can be optimized out. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Scott Jiang authored
Signed-off-by:
-
Dan Carpenter authored
The current test doesn't make a lot of sense. It's likely to be true, which is what we would want in most cases. From looking at how this is handled in other drivers, I think "&" was intended instead of "*". It's an easy mistake to make because they are next to each other on the keyboard. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Peter Huewe authored
Found with coccicheck. The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Volokh Konstantin authored
[media] staging: media: go7007: call_all stream stuff Some Additional stuff for v4l2_subdev stream events partial need for new style framework. Also need for wis_tw2804 notification stuff Signed-off-by:
Volokh Konstantin <volokh84@gmail.com> Signed-off-by:
-
Volokh Konstantin authored
[media] staging: media: go7007: i2c GPIO initialization Reset i2c stuff for GO7007_BOARDID_ADLINK_MPG24 need reset GPIO always when encoder initialize Signed-off-by:
-
Volokh Konstantin authored
If no firmware was loaded (no exists,wrong or some error) then rmmod fails with OOPS, so need some protection stuff. Signed-off-by:
-
Volokh Konstantin authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
On Wed, 6 Feb 2013 09:04:39 +0000 Olivier GRENIE <olivier.grenie@parrot.com> wrote: > I do not agree with the patch. Let's take an example: adap->id = 0. Then: > * 1 << ~(adap->id) = 1 << ~(0) = 0 > * ~(1 << adap->id) = ~(1 << 0) = 0xFE > > The correct change should be: st->channel_state |= 1 << (1 - adap->id); Indeed, the original source code was not correct. Requested-by:
Olivier GRENIE <olivier.grenie@parrot.com> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by:
-
Prabhakar Lad authored
This patch removes the field description of fields that no longer exists, along side aligns the field description of fields. Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by:
-
Eddi De Pieri authored
Add support for Digivox Mini HD (rtl2832) The tuner works, but with worst performance then realtek linux driver, due to incomplete implementation of fc2580.c Signed-off-by:
Eddi De Pieri <eddi@depieri.net> Tested-by:
Lorenzo Dongarrà <lorenzo_64@katamail.com> Acked-by:
-
Hans Verkuil authored
The documentation suggested that if the control value is wrong only ERANGE can be returned. But in some cases (an invalid menu index) EINVAL can also be returned. Clarify this. Signed-off-by:
-
Hans Verkuil authored
The documentation of the error_idx field was incomplete and confusing. This patch improves it. Signed-off-by:
-
Hans Verkuil authored
Fixed the following errors (with exception of the SVG errors): GEN /home/hans/work/src/v4l/media-git/Documentation/DocBook//v4l2.xml rm -rf Documentation/DocBook/index.html; echo '<h1>Linux Kernel HTML Documentation</h1>' >> Documentation/DocBook/index.html && echo '<h2>Kernel Version: 3.8.0-rc1</h2>' >> Documentation/DocBook/index.html && cat Documentation/DocBook/media_api.html >> Documentation/DocBook/index.html /tmp/x.xml:883: element revremark: validity error : Element structname is not declared in revremark list of possible children /tmp/x.xml:883: element revremark: validity error : Element xref is not declared in revremark list of possible children /tmp/x.xml:9580: element xref: validity error : Element xref was declared EMPTY this one has content /tmp/x.xml:13508: element link: validity error : Element link does not carry attribute linkend /tmp/x.xml:13508: element link: validity error : No declaration for attribute linked of element link /tmp/x.xml:16986: element imagedata: validity error : Value "SVG" for attribute format of imagedata is not among the enumerated set /tmp/x.xml:17003: element imagedata: validity error : Value "SVG" for attribute format of imagedata is not among the enumerated set /tmp/x.xml:17022: element imagedata: validity error : Value "SVG" for attribute format of imagedata is not among the enumerated set Signed-off-by:
-
- 05 Feb, 2013 9 commits
-
-
Dan Carpenter authored
There is a missing break so we use XC_RF_MODE_CABLE instead of XC_RF_MODE_AIR. Signed-off-by:
-
Frank Schaefer authored
Remove em28xx_i2c_ir_work() and check the device type in the common callback function em28xx_ir_work() instead. Simplifies em28xx_ir_start(). Reduces the code size with a minor performance drawback. Signed-off-by:
-
Frank Schaefer authored
Set up the i2c_client locally in em28xx_i2c_ir_handle_key(). Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
Frank Schaefer authored
We already have the key polling functions and the polling infrastructure in em28xx-input, so we can easily get rid of the dependency on module ir-kbd-i2c. For maximum safety, do not touch the key reporting mechanism for those devices. Code size could be improved further but would have minor peformance impacts. Tested with device "Terratec Cinergy 200 USB" (EM2800_BOARD_TERRATEC_CINERGY_200) [mchehab@redhat.com: Fix two checkpatch.pl warnings: ERROR: "foo * bar" should be "foo *bar" (line 465) WARNING: kfree(NULL) is safe this check is probably not required (line 725)] Signed-off-by:
-
Frank Schaefer authored
We don't report any key/scan codes or errors inside the key polling functions for internal IR RC devices, just in the key handling fucntions. Do the same for external devices. Signed-off-by:
-
Frank Schaefer authored
Field 'old' of struct IR_i2c is used nowhere in module ir-kbd-i2c. Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
-
