virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS
and CONFIG_HOTPLUG are enabled.

The path is:
    virtnet_set_channels - calls get_online_cpus(), which is a trivial
wrapper around cpus_read_lock()
    netif_set_real_num_tx_queues
    netif_reset_xps_queues_gt
    netif_reset_xps_queues - calls cpus_read_lock()

This call chain and potential deadlock happens when the number of TX
queues is reduced.

This commit the removes netif_set_real_num_[tr]x_queues calls from
inside the get/put_online_cpus section, as they don't require that it
be held.

Fixes: 47be2479 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.11

First set of fixes for v5.11, more fixes than usual this time. For
ath11k we have several fixes for QCA6390 PCI support and mt76 has
several. Also one build fix for mt76.

mt76
 * fix two NULL pointer dereference
 * fix build error when CONFIG_MAC80211_MESH is disabled

rtlwifi
 * fix use-after-free in firmware handling code

ath11k
 * error handling fixes
 * fix crash found during connect and disconnect test
 * handle HT disable better
 * avoid printing qmi memory failure during firmware bootup
 * disable ASPM during firmware bootup

* tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
  MAINTAINERS: switch to different email address
  mt76: mt7915: fix MESH ifdef block
  mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue
  mt76: sdio: remove wake logic in mt76s_process_tx_queue
  mt76: usb: remove wake logic in mt76u_status_worker
  ath11k: pci: disable ASPM L0sLs before downloading firmware
  ath11k: qmi: try to allocate a big block of DMA memory first
  rtlwifi: rise completion at the last step of firmware callback
  mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker
  ath11k: Fix ath11k_pci_fix_l1ss()
  ath11k: Fix error code in ath11k_core_suspend()
  ath11k: start vdev if a bss peer is already created
  ath11k: fix crash caused by NULL rx_channel
  ath11k: add missing null check on allocated skb
====================

Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

IPIP tunnels packets are unknown to device,
hence these packets are incorrectly parsed and
caused the packet corruption, so disable offlods
for such packets at run time.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Join adjacent questions to a single question line. This fixes the
formatting of questions that were not part of the heading.

Also, drop Q: and A: prefixes. We don't need them now that questions and
answers are visually separated.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/f76078ba5547744f2ec178984c32fbc7dcd29a2b.1608454187.git.baruch@tkos.co.ilSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When mvneta_port_power_up() fails, we should execute
cleanup functions after label err_netdev to avoid memleak.

Fixes: 41c2b6b4 ("net: ethernet: mvneta: Add back interface mode validation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 34f0f4e3 ("ibmvnic: Fix login buffer memory leaks") frees
login_rsp_buffer in release_resources() and send_login()
because handle_login_rsp() does not free it.
Commit f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in
ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp().
It seems unnecessary to free it in release_resources() and send_login().
There are chances that handle_login_rsp returns earlier without freeing
buffers. Double-checking the buffer is harmless since
release_login_buffer and release_login_rsp_buffer will
do nothing if buffer is already freed.

Fixes: f3ae59c0 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct")
Fixes: 34f0f4e3 ("ibmvnic: Fix login buffer memory leaks")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When searching for inactive maintainers it's useful to filter
out mailing list addresses. Such "maintainers" will obviously
never feature in a "From:" line of an email or a review tag.

Since "L:" entries only provide the address of a mailing list
without a fancy name extend this pattern to "M:" entries.

Alternatively we could reserve M: entries for humans only
and move the fake "maintainers" to L:. While I'd personally
prefer to reserve M: for humans only, I'm not 100% that's
a great choice either, given most L: entries are in fact
open mailing lists with public archives.

Link: https://lore.kernel.org/r/20201219185538.750076-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock
inputs:
- Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to
  both inputs)
- GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2

All known vendor kernels and u-boots are using the first input only. We
let the common clock framework automatically choose the "right" parent.
For some boards this causes a problem though, specificially with G12A and
newer SoCs. The clock input is used for generating the 125MHz RGMII TX
clock. For the two input clocks this means on G12A:
- FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz
- MPLL2: 499999993Hz / 4 = 124999998.25Hz

In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz
closer to the requested frequency than FCLK_DIV2. In reality however
there is a resource conflict because MPLL2 is needed to generate some of
the audio clocks. dwmac-meson8b probes first and sets up the clock tree
with MPLL2. This works fine until the audio driver comes and "steals"
the MPLL2 clocks and configures it with it's own rate (294909637Hz). The
common clock framework happily changes the MPLL2 rate but does not
reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz,
which is more than 40% off the requested 125MHz.

Don't use the second clock input for now to force the common clock
framework to always select the first parent. This mimics the behavior
from the vendor driver and fixes the clock resource conflict with the
audio driver on G12A boards. Once the common clock framework can handle
this situation this change can be reverted again.

Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Link: https://lore.kernel.org/r/20201219135036.3216017-1-martin.blumenstingl@googlemail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

During GoP port 2 Networking Complex Control mode of operation configurations,
also GoP port 3 mode of operation was wrongly set.
Patch removes these configurations.

Fixes: f84bf386 ("net: mvpp2: initialize the GoP")
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

PPPIOCGL2TPSTATS already uses 54. This shouldn't be a problem in
practice, but let's keep the logical decreasing assignment scheme.

Fixes: 4cf476ce ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/e3a4c355e3820331d8e1fffef8522739aae58b57.1608380117.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This error path needs to disable the pci device before returning.

Fixes: ede58ef2 ("atm: remove deprecated use of pci api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwandaSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Let the FW know we have enough receive buffer space for the
vlan tag if it isn't stripped.

Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20201218215001.64696-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rasmus Villemoes says:

====================
ucc_geth fixes

This is three bug fixes that fell out of a series of cleanups of the
ucc_geth driver.
====================

Link: https://lore.kernel.org/r/20201218105538.30563-1-rasmus.villemoes@prevas.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.

Fixes: 80a9fad8 ("ucc_geth: fix module removal")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Table 8-53 in the QUICC Engine Reference manual shows definitions of
fields up to a size of 192 bytes, not just 128. But in table 8-111,
one does find the text

  Base Address of the Global Transmitter Parameter RAM Page. [...]
  The user needs to allocate 128 bytes for this page. The address must
  be aligned to the page size.

I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual;
they both have this inconsistency (and the table numbers are the
same).

Adding a bit of debug printing, on my board the struct
ucc_geth_tx_global_pram is allocated at offset 0x880, while
the (opaque) ucc_geth_thread_data_tx gets allocated immediately
afterwards, at 0x900. So whatever the engine writes into the thread
data overlaps with the tail of the global tx pram (and devmem says
that something does get written during a simple ping).

I haven't observed any failure that could be attributed to this, but
it seems to be the kind of thing that would be extremely hard to
debug. So extend the struct definition so that we do allocate 192
bytes.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All the buffers and registers are already set up appropriately for an
MTU slightly above 1500, so we just need to expose this to the
networking stack. AFAICT, there's no need to implement .ndo_change_mtu
when the receive buffers are always set up to support the max_mtu.

This fixes several warnings during boot on our mpc8309-board with an
embedded mv88e6250 switch:

mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
...
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead

The last line explains what the DSA stack tries to do: achieving an MTU
of 1500 on-the-wire requires that the master netdevice connected to
the CPU port supports an MTU of 1500+the tagging overhead.

Fixes: bfcb8132 ("net: dsa: configure the MTU for switch ports")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver is already allocating receive buffers of 2KiB and the
Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE.

Fixes: bfcb8132 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Switching to private mail account as work email is polluted with a legal
disclaimer. Just making it extra clear by changing the email address in
the MAINTAINERS file as well.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <aspriel@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201220141807.17278-1-aspriel@gmail.com

Fix a build error when CONFIG_MAC80211_MESH is not enabled:

../drivers/net/wireless/mediatek/mt76/mt7915/init.c:47:2: error: expected expression before '}' token
  }, {
  ^

Fixes: af901eb4 ("mt76: mt7915: get rid of dbdc debugfs knob")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201218173202.23159-1-rdunlap@infradead.org

Fix a possible NULL pointer dereference in mt76s_process_tx_queue that
can occur if status thread runs before allocating tx queues

Fixes: 6a618acb ("mt76: sdio: convert {status/net}_work to mt76_worker")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/b49c1b4edacd87b2241a9fd0431dd4864c8963f6.1607418933.git.lorenzo@kernel.org

Similar to mmio/usb code path, remove wake logic in mt76s_process_tx_queue
routine. Starting from commit 90d494c9 ("mt76: improve tx queue
stop/wake"), the wake queue logic on the sdio status path is no longer
necessary since the hw queues are no longer stopped on the mt76 tx path.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d2d7d9d437f4dec2ef1df0ed070b9cf299f021ad.1607164041.git.lorenzo@kernel.org

Similar to mmio code path, remove wake logic in mt76u_status_worker handler.
Starting from commit 90d494c9 ("mt76: improve tx queue stop/wake")', the
wake queue logic on the usb status path is no longer necessary since the hw
queues are no longer stopped on the mt76 tx path.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org

ath.git fixes for 5.11. Major changes:

ath11k

* add null check for skb allocation

* fix crash found during connect/disconnect stress testing

* fix for HT disabled case

* brown paperbag fixes for my bugs in suspend code

* fix an unnecessary qmi allocation during firmware bootup

* disable ASPM during firmware bootup to avoid issues

Current PPPoE+IPv6 entry is jumping to 'next-hdr'
field and not to 'DIP' field as done for IPv4.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Issue:
Flow control frame used to pause GoP(MAC) was delivered to the CPU
and created a load on the CPU. Since XOFF/XON frames are used only
by MAC, these frames should be dropped inside MAC.

Fix:
According to 802.3-2012 - IEEE Standard for Ethernet pause frame
has unique destination MAC address 01-80-C2-00-00-01.
Add TCAM parser entry to track and drop pause frames by destination MAC.

Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Force link UP can be enabled by bootloader during tftpboot
and breaks NFS support.
Force link UP disabled during port init procedure.

Fixes: f84bf386 ("net: mvpp2: initialize the GoP")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Incorrect loop in error path of nft_set_elem_expr_clone(),
   from Colin Ian King.

2) Missing xt_table_get_private_protected() to access table
   private data in x_tables, from Subash Abhinov Kasiviswanathan.

3) Possible oops in ipset hash type resize, from Vasily Averin.

4) Fix shift-out-of-bounds in ipset hash type, also from Vasily.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: ipset: fix shift-out-of-bounds in htable_bits()
  netfilter: ipset: fixes possible oops in mtype_resize
  netfilter: x_tables: Update remaining dereference to RCU
  netfilter: nftables: fix incorrect increment of loop counter
====================

Link: https://lore.kernel.org/r/20201218120409.3659-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

taprio_graft() can insert a NULL element in the array of child qdiscs. As
a consquence, taprio_reset() might not reset child qdiscs completely, and
taprio_destroy() might leak resources. Fix it by ensuring that loops that
iterate over q->qdiscs[] don't end when they find the first NULL item.

Fixes: 44d4775c ("net/sched: sch_taprio: reset child qdiscs before freeing them")
Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2020-12-17

Sylwester fixes an issue where PF was not properly being rebuilt
following VF removal for i40e.

Jakub Kicinski fixes a double release of rtnl_lock on
iavf_lan_add_device() error for iavf.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  iavf: fix double-release of rtnl_lock
  i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs
====================

Link: https://lore.kernel.org/r/20201217223418.3134992-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On 64-bit systems the packet procfs header field names following 'sk'
are not aligned correctly:

sk       RefCnt Type Proto  Iface R Rmem   User   Inode
00000000605d2c64 3      3    0003   7     1 450880 0      16643
00000000080e9b80 2      2    0000   0     0 0      0      17404
00000000b23b8a00 2      2    0000   0     0 0      0      17421
...

With this change field names are correctly aligned:

sk               RefCnt Type Proto  Iface R Rmem   User   Inode
000000005c3b1d97 3      3    0003   7     1 21568  0      16178
000000007be55bb7 3      3    fbce   8     1 0      0      16250
00000000be62127d 3      3    fbcd   8     1 0      0      16254
...
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/54917251d8433735d9a24e935a6cb8eb88b4058a.1608103684.git.baruch@tkos.co.ilSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sometimes QCA6390 doesn't switch to amss state as device enters
L1ss state, so disable L0sL1s during firmware downloading.
Driver recovers the ASPM to default value in start callback
or powerdown callback.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608218530-15426-1-git-send-email-kvalo@codeaurora.org

Not all firmware versions support allocating DMA memory in smaller blocks so
first try to allocate big block of DMA memory for QMI. If the allocation fails,
let firmware request multiple blocks of DMA memory with smaller size.

This also fixes an unnecessary error message seen during ath11k probe on
QCA6390:

ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0
ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org

This code does not jump to exit on an error in iavf_lan_add_device(),
so the rtnl_unlock() from the normal path will follow.

Fixes: b66c7bc1 ("iavf: Refactor init state machine")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Pull networking fixes from Jakub Kicinski:
 "Current release - always broken:

   - net/smc: fix access to parent of an ib device

   - devlink: use _BITUL() macro instead of BIT() in the UAPI header

   - handful of mptcp fixes

  Previous release - regressions:

   - intel: AF_XDP: clear the status bits for the next_to_use descriptor

   - dpaa2-eth: fix the size of the mapped SGT buffer

  Previous release - always broken:

   - mptcp: fix security context on server socket

   - ethtool: fix string set id check

   - ethtool: fix error paths in ethnl_set_channels()

   - lan743x: fix rx_napi_poll/interrupt ping-pong

   - qca: ar9331: fix sleeping function called from invalid context bug"

* tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits)
  net/sched: sch_taprio: reset child qdiscs before freeing them
  nfp: move indirect block cleanup to flower app stop callback
  octeontx2-af: Fix undetected unmap PF error check
  net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"
  qlcnic: Fix error code in probe
  mptcp: fix pending data accounting
  mptcp: push pending frames when subflow has free space
  mptcp: properly annotate nested lock
  mptcp: fix security context on server socket
  net/mlx5: Fix compilation warning for 32-bit platform
  mptcp: clear use_ack and use_map when dropping other suboptions
  devlink: use _BITUL() macro instead of BIT() in the UAPI header
  net: korina: fix return value
  net/smc: fix access to parent of an ib device
  ethtool: fix error paths in ethnl_set_channels()
  nfc: s3fwrn5: Remove unused NCI prop commands
  nfc: s3fwrn5: Remove the delay for NFC sleep
  phy: fix kdoc warning
  tipc: do sanity check payload of a netlink message
  use __netdev_notify_peers in hyperv
  ...

Pull OpenRISC updates from Stafford Horne:

 - New drivers and OpenRISC support for the LiteX platform

 - A bug fix to support userspace gdb debugging

 - Fixes one compile issue with blk-iocost

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: add local64.h to fix blk-iocost build
  openrisc: fix trap for debugger breakpoint signalling
  openrisc: add support for LiteX
  drivers/tty/serial: add LiteUART driver
  dt-bindings: serial: document LiteUART bindings
  drivers/soc/litex: add LiteX SoC Controller driver
  dt-bindings: soc: document LiteX SoC Controller bindings
  dt-bindings: vendor: add vendor prefix for LiteX

Pull powerpc updates from Michael Ellerman:

 - Switch to the generic C VDSO, as well as some cleanups of our VDSO
   setup/handling code.

 - Support for KUAP (Kernel User Access Prevention) on systems using the
   hashed page table MMU, using memory protection keys.

 - Better handling of PowerVM SMT8 systems where all threads of a core
   do not share an L2, allowing the scheduler to make better scheduling
   decisions.

 - Further improvements to our machine check handling.

 - Show registers when unwinding interrupt frames during stack traces.

 - Improvements to our pseries (PowerVM) partition migration code.

 - Several series from Christophe refactoring and cleaning up various
   parts of the 32-bit code.

 - Other smaller features, fixes & cleanups.

Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King,
Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz,
Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour,
Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver
O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej
Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe
Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu.

* tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits)
  powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug
  powerpc: Add config fragment for disabling -Werror
  powerpc/configs: Add ppc64le_allnoconfig target
  powerpc/powernv: Rate limit opal-elog read failure message
  powerpc/pseries/memhotplug: Quieten some DLPAR operations
  powerpc/ps3: use dma_mapping_error()
  powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10
  powerpc/perf: Fix Threshold Event Counter Multiplier width for P10
  powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range()
  KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp
  KVM: PPC: fix comparison to bool warning
  KVM: PPC: Book3S: Assign boolean values to a bool variable
  powerpc: Inline setup_kup()
  powerpc/64s: Mark the kuap/kuep functions non __init
  KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering
  powerpc/xive: Improve error reporting of OPAL calls
  powerpc/xive: Simplify xive_do_source_eoi()
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW
  powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG
  ...

Pull tracing updates from Steven Rostedt:
 "The major update to this release is that there's a new arch config
  option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS.

  Currently, only x86_64 enables it. All the ftrace callbacks now take a
  struct ftrace_regs instead of a struct pt_regs. If the architecture
  has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will
  have enough information to read the arguments of the function being
  traced, as well as access to the stack pointer.

  This way, if a user (like live kernel patching) only cares about the
  arguments, then it can avoid using the heavier weight "regs" callback,
  that puts in enough information in the struct ftrace_regs to simulate
  a breakpoint exception (needed for kprobes).

  A new config option that audits the timestamps of the ftrace ring
  buffer at most every event recorded.

  Ftrace recursion protection has been cleaned up to move the protection
  to the callback itself (this saves on an extra function call for those
  callbacks).

  Perf now handles its own RCU protection and does not depend on ftrace
  to do it for it (saving on that extra function call).

  New debug option to add "recursed_functions" file to tracefs that
  lists all the places that triggered the recursion protection of the
  function tracer. This will show where things need to be fixed as
  recursion slows down the function tracer.

  The eval enum mapping updates done at boot up are now offloaded to a
  work queue, as it caused a noticeable pause on slow embedded boards.

  Various clean ups and last minute fixes"

* tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  tracing: Offload eval map updates to a work queue
  Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"
  ring-buffer: Add rb_check_bpage in __rb_allocate_pages
  ring-buffer: Fix two typos in comments
  tracing: Drop unneeded assignment in ring_buffer_resize()
  tracing: Disable ftrace selftests when any tracer is running
  seq_buf: Avoid type mismatch for seq_buf_init
  ring-buffer: Fix a typo in function description
  ring-buffer: Remove obsolete rb_event_is_commit()
  ring-buffer: Add test to validate the time stamp deltas
  ftrace/documentation: Fix RST C code blocks
  tracing: Clean up after filter logic rewriting
  tracing: Remove the useless value assignment in test_create_synth_event()
  livepatch: Use the default ftrace_ops instead of REGS when ARGS is available
  ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
  ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs
  MAINTAINERS: assign ./fs/tracefs to TRACING
  tracing: Fix some typos in comments
  ftrace: Remove unused varible 'ret'
  ring-buffer: Add recording of ring buffer recursion into recursed_functions
  ...

Pull modules updates from Jessica Yu:
 "Summary of modules changes for the 5.11 merge window:

   - Fix a race condition between systemd/udev and the module loader.

     The module loader was sending a uevent before the module was fully
     initialized (i.e., before its init function has been called). This
     means udev can start processing the module uevent before the module
     has finished initializing, and some udev rules expect that the
     module has initialized already upon receiving the uevent.

     This resulted in some systemd mount units failing if udev processes
     the event faster than the module can finish init. This is fixed by
     delaying the uevent until after the module has called its init
     routine.

   - Make the linker array sections for kernel params and module version
     attributes more robust by switching to use the alignment of the
     type in question.

     Namely, linker section arrays will be constructed using the
     alignment required by the struct (using __alignof__()) as opposed
     to a specific value such as sizeof(void *) or sizeof(long). This is
     less likely to cause breakages should the size of the type ever
     change (Johan Hovold)

   - Fix module state inconsistency by setting it back to GOING when a
     module fails to load and is on its way out (Miroslav Benes)

   - Some comment and code cleanups (Sergey Shtylyov)"

* tag 'modules-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: delay kobject uevent until after module init call
  module: drop semicolon from version macro
  init: use type alignment for kernel parameters
  params: clean up module-param macros
  params: use type alignment for kernel parameters
  params: drop redundant "unused" attributes
  module: simplify version-attribute handling
  module: drop version-attribute alignment
  module: fix comment style
  module: add more 'kernel-doc' comments
  module: fix up 'kernel-doc' comments
  module: only handle errors with the *switch* statement in module_sig_check()
  module: avoid *goto*s in module_sig_check()
  module: merge repetitive strings in module_sig_check()
  module: set MODULE_STATE_GOING state when a module fails to load

When removing VFs for PF added to bridge there was
an error I40E_AQ_RC_EINVAL. It was caused by not properly
resetting and reinitializing PF when adding/removing VFs.
Changed how reset is performed when adding/removing VFs
to properly reinitialize PFs VSI.

Fixes: fc60861e ("i40e: start up in VEPA mode by default")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Pull dmaengine updates from Vinod Koul:
 "The last dmaengine updates for this year :)

  This contains couple of new drivers, new device support and updates to
  bunch of drivers.

  New drivers/devices:
   - Qualcomm ADM driver
   - Qualcomm GPI driver
   - Allwinner A100 DMA support
   - Microchip Sama7g5 support
   - Mediatek MT8516 apdma

  Updates:
   - more updates to idxd driver and support for IAX config
   - runtime PM support for dw driver
   - TI drivers"

* tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits)
  soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init
  dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA
  dmaengine: ti: k3-udma: Initial support for K3 PKTDMA
  dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling
  dmaengine: ti: k3-udma: Initial support for K3 BCDMA
  soc: ti: k3-ringacc: add AM64 DMA rings support.
  dmaengine: ti: Add support for k3 event routers
  dmaengine: ti: k3-psil: Add initial map for AM64
  dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 PKTDMA
  dt-bindings: dma: ti: Add document for K3 BCDMA
  dmaengine: dmatest: Use dmaengine_get_dma_device
  dmaengine: doc: client: Update for dmaengine_get_dma_device() usage
  dmaengine: Add support for per channel coherency handling
  dmaengine: of-dma: Add support for optional router configuration callback
  dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings
  dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev
  dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API
  dmaengine: ti: k3-udma: Add support for second resource range from sysfw
  dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
  ...