- 07 Jul, 2018 28 commits
-
-
David S. Miller authored
Davide Caratti says: ==================== net/sched: fix NULL dereference in 'goto chain' control action in a couple of TC actions (i.e. csum and tunnel_key), the control action is stored together with the action-specific configuration data. This avoids a race condition (see [1]), but it causes a crash when 'goto chain' is used with the above actions. Since this race condition is tolerated on the other TC actions (it's present even on actions where the spinlock is still used), storing the control action in the common area should be acceptable for tunnel_key and csum as well. [1] https://www.spinics.net/lists/netdev/msg472047.html ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
the control action in the common member of struct tcf_tunnel_key must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_TUNNEL_KEY, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action tunnel_key unset goto chain 1 from causing a NULL dereference when a matching packet is received: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 80000001097ac067 P4D 80000001097ac067 PUD 103b0a067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3491 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Call Trace: <IRQ> fl_classify+0x1ad/0x1c0 [cls_flower] ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? update_load_avg+0x665/0x690 ? update_load_avg+0x665/0x690 ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_entity+0xd0/0x270 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd67e18dc93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffe0189b748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000020ca010 RCX: 00007fd67e18dc93 RDX: 0000000000000062 RSI: 00000000020ca322 RDI: 0000000000000003 RBP: 00007ffe0189b780 R08: 00007ffe0189b760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 00000000020ca322 R14: 00007ffe0189b760 R15: 0000000000000003 Modules linked in: act_tunnel_key act_gact cls_flower sch_ingress vrf veth act_csum(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic kvm_intel kvm irqbypass snd_hda_intel crct10dif_pclmul crc32_pclmul hp_wmi ghash_clmulni_intel pcbc snd_hda_codec aesni_intel sparse_keymap rfkill snd_hda_core snd_hwdep snd_seq crypto_simd iTCO_wdt gpio_ich iTCO_vendor_support wmi_bmof cryptd mei_wdt glue_helper snd_seq_device snd_pcm pcspkr snd_timer snd i2c_i801 lpc_ich sg soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod sr_mod cdrom i915 video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci crc32c_intel libahci serio_raw sfc libata mtd drm ixgbe mdio i2c_core e1000e dca CR2: 0000000000000000 ---[ end trace 1ab8b5b5d4639dfc ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x11400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
the control action in the common member of struct tcf_csum must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_CSUM, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action csum ip or tcp or udp or sctp goto chain 1 from triggering a NULL pointer dereference when a matching packet is received. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000010416b067 P4D 800000010416b067 PUD 1041be067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3072 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300 FS: 00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0 Call Trace: <IRQ> fl_classify+0x1ad/0x1c0 [cls_flower] ? arp_rcv+0x121/0x1b0 ? __x2apic_send_IPI_dest+0x40/0x40 ? smp_reschedule_interrupt+0x1c/0xd0 ? reschedule_interrupt+0xf/0x20 ? reschedule_interrupt+0xa/0x20 ? device_is_rmrr_locked+0xe/0x50 ? iommu_should_identity_map+0x49/0xd0 ? __intel_map_single+0x30/0x140 ? e1000e_update_rdt_wa.isra.52+0x22/0xb0 [e1000e] ? e1000_alloc_rx_buffers+0x233/0x250 [e1000e] ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_task_fair+0xb6/0x7d0 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5a45cbec93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffd0ee6d748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000001161010 RCX: 00007f5a45cbec93 RDX: 0000000000000062 RSI: 0000000001161322 RDI: 0000000000000003 RBP: 00007ffd0ee6d780 R08: 00007ffd0ee6d760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 0000000001161322 R14: 00007ffd0ee6d760 R15: 0000000000000003 Modules linked in: act_csum act_gact cls_flower sch_ingress vrf veth act_tunnel_key(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi snd_hda_codec_realtek kvm snd_hda_codec_generic hp_wmi iTCO_wdt sparse_keymap rfkill mei_wdt iTCO_vendor_support wmi_bmof gpio_ich irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel snd_hda_intel crypto_simd cryptd snd_hda_codec glue_helper snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm pcspkr i2c_i801 snd_timer snd sg lpc_ich soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ahci libahci crc32c_intel i915 ixgbe serio_raw libata video dca i2c_algo_bit sfc drm_kms_helper syscopyarea mtd sysfillrect mdio sysimgblt fb_sys_fops drm e1000e i2c_core CR2: 0000000000000000 ---[ end trace 3c9e9d1a77df4026 ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300 FS: 00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x26400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 9c5f69bb ("net/sched: act_csum: don't use spinlock in the fast path") Signed-off-by:
-
Harini Katakam authored
GEM version in ZynqMP and most versions greater than r1p07 supports TX and RX BD prefetch. The number of BDs that can be prefetched is a HW configurable parameter. For ZynqMP, this parameter is 4. When GEM DMA is accessing the last BD in the ring, even before the BD is processed and the WRAP bit is noticed, it will have prefetched BDs outside the BD ring. These will not be processed but it is necessary to have accessible memory after the last BD. Especially in cases where SMMU is used, memory locations immediately after the last BD may not have translation tables triggering HRESP errors. Hence always allocate extra BDs to accommodate for prefetch. The value of tx/rx bd prefetch for any given SoC version is: 2 ^ (corresponding field in design config 10 register). (value of this field >= 1) Added a capability flag so that older IP versions that do not have DCFG10 or this prefetch capability are not affected. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Harini Katakam authored
rx ring is allocated for all queues in macb_alloc_consistent. Free the same for all queues instead of just Q0. Signed-off-by:
-
Ursula Braun authored
smc_release() calls a sock_put() for smc fallback sockets to cover the passive closing sock_hold() in __smc_connect() and smc_tcp_listen_work(). This does not make sense for sockets in state SMC_LISTEN and SMC_INIT. An SMC socket stays in state SMC_INIT if connect fails. The sock_put in smc_connect_abort() does not cover all failures. Move it into smc_connect_decline_fallback(). Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback") Reported-by: syzbot+3a0748c8f2f210c0ef9b@syzkaller.appspotmail.com Reported-by: syzbot+9e60d2428a42049a592a@syzkaller.appspotmail.com Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
These two functions return the regular -EINVAL failure in the normal code path, but return a nonstandard '-1' error otherwise, which gets interpreted as -EPERM. Let's change it to -EINVAL for the dummy functions as well. Fixes: 4d4fd361 ("net: bridge: Publish bridge accessor functions") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Casey Leedom authored
t4_get_flash_params() fails in a fatal fashion if the FLASH part isn't one of the recognized parts. But this leads to desperate efforts to update drivers when various FLASH parts which we are using suddenly become unavailable and we need to substitute new FLASH parts. This has lead to more than one Customer Field Emergency when a Customer has an old driver and suddenly can't use newly shipped adapters. This commit fixes this by simply assuming that the FLASH part is 4MB in size if it can't be identified. Note that all Chelsio adapters will have flash parts which are at least 4MB in size. Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: fixes in duplicate address discovery function commit 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") introduced new functionality that has turned out to contain several bugs and weaknesses. We address those in this series. ==================== Signed-off-by:
-
Jon Maloy authored
The setting of the node address is not thread safe, meaning that two discoverers may decide to set it simultanously, with a duplicate entry in the name table as result. We fix that with this commit. Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Maloy authored
The duplicate address discovery protocol is not safe against two discoverers running in parallel. The one executing first after the trial period is over will set the node address and change its own message type to DSC_REQ_MSG. The one executing last may find that the node address is already set, and never change message type, with the result that its links may never be established. In this commmit we ensure that the message type always is set correctly after the trial period is over. Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by:
-
Jon Maloy authored
With the duplicate address discovery protocol for tipc nodes addresses we introduced a one second trial period before a node is allocated a hash number to use as address. Unfortunately, we miss to handle the case when a regular LINK REQUEST/ RESPONSE arrives from a cluster node during the trial period. Such messages are not ignored as they should be, leading to links setup attempts while the node still has no address. Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by:
-
Jon Maloy authored
The function for checking if there is an node address conflict is supposed to return a suggestion for a new address if it finds a conflict, and zero otherwise. But in case the peer being checked is previously unknown it does instead return a "suggestion" for the checked address itself. This results in a DSC_TRIAL_FAIL_MSG being sent unecessarily to the peer, and sometimes makes the trial period starting over again. Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by:
-
David S. Miller authored
Vladimir Zapolskiy says: ==================== ravb/sh_eth: fix sleep in atomic by reusing shared ethtool handlers For ages trivial changes to RAVB and SuperH ethernet links by means of standard 'ethtool' trigger a 'sleeping function called from invalid context' bug, to visualize it on r8a7795 ULCB: % ethtool -r eth0 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 128, pid: 554, name: ethtool INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] (null) hardirqs last disabled at (0): [<ffff0000080e1d3c>] copy_process.isra.7.part.8+0x2cc/0x1918 softirqs last enabled at (0): [<ffff0000080e1d3c>] copy_process.isra.7.part.8+0x2cc/0x1918 softirqs last disabled at (0): [<0000000000000000>] (null) CPU: 5 PID: 554 Comm: ethtool Not tainted 4.17.0-rc4-arm64-renesas+ #33 Hardware name: Renesas H3ULCB board based on r8a7795 ES2.0+ (DT) Call trace: dump_backtrace+0x0/0x198 show_stack+0x24/0x30 dump_stack+0xb8/0xf4 ___might_sleep+0x1c8/0x1f8 __might_sleep+0x58/0x90 __mutex_lock+0x50/0x890 mutex_lock_nested+0x3c/0x50 phy_start_aneg_priv+0x38/0x180 phy_start_aneg+0x24/0x30 ravb_nway_reset+0x3c/0x68 dev_ethtool+0x3dc/0x2338 dev_ioctl+0x19c/0x490 sock_do_ioctl+0xe0/0x238 sock_ioctl+0x254/0x460 do_vfs_ioctl+0xb0/0x918 ksys_ioctl+0x50/0x80 sys_ioctl+0x34/0x48 __sys_trace_return+0x0/0x4 The root cause is that an attempt to modify ECMR and GECMR registers only when RX/TX function is disabled was too overcomplicated in its original implementation, also processing of an optional Link Change interrupt added even more complexity, as a result the implementation was error prone. The new locking scheme is confirmed to be correct by dumping driver specific and generic PHY framework function calls with aid of ftrace while running more or less advanced tests. Please note that sh_eth patches from the series were built-tested only. On purpose I do not add Fixes tags, the reused PHY handlers were added way later than the fixed problems were firstly found in the drivers. Changes from v1 to v2: * the original patches are split to bugfixes and enhancements only, both v1 and v2 series are absolutely equal in total, thus I omit description of changes in individual patches, * the latter implies that there should be no strict need for retesting, but because formally two series are different, I have to drop the tags given by Geert and Andrew, please send your tags again. ==================== Signed-off-by: -
Vladimir Zapolskiy authored
The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house ravb_set_link_ksettings(). Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Vladimir Zapolskiy authored
The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house ravb_get_link_ksettings(). Signed-off-by:
-
Vladimir Zapolskiy authored
phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by:
-
Vladimir Zapolskiy authored
The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house ravb_nway_reset(). Signed-off-by:
-
Vladimir Zapolskiy authored
There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from ravb_phy_start() when a network device is opened. Signed-off-by:
-
Vladimir Zapolskiy authored
The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in ravb_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
-
Vladimir Zapolskiy authored
Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
-
Vladimir Zapolskiy authored
The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house sh_eth_set_link_ksettings(). Signed-off-by:
-
Vladimir Zapolskiy authored
The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house sh_eth_get_link_ksettings(). Signed-off-by:
-
Vladimir Zapolskiy authored
phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by:
-
Vladimir Zapolskiy authored
The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house sh_eth_nway_reset(). Signed-off-by:
-
Vladimir Zapolskiy authored
There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from sh_eth_phy_start() when a network device is opened. Signed-off-by:
-
Vladimir Zapolskiy authored
The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in sh_eth_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. For reference the change is a partial rework of commit 1e1b812b ("sh_eth: fix handling of no LINK signal"). Fixes: dc19e4e5 ("sh: sh_eth: Add support ethtool") Signed-off-by:
-
Vladimir Zapolskiy authored
Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: dc19e4e5 ("sh: sh_eth: Add support ethtool") Signed-off-by:
-
- 06 Jul, 2018 4 commits
-
-
Tyler Hicks authored
The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Igor Russkikh authored
Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502f ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by:
Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by:
-
Stefan Schmidt authored
The mail server hosting the old address is going to fade out. Time to update to an address I control directly. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Nicholas Mc Guire authored
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent. So define a constant with (hopefully) meaningful name and pass it through msecs_to_jiffies() to fix the HZ dependency. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> commit f21fb3ed ("Add support of Cavium Liquidio ethernet adapters") Acked-by:
Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by:
-
- 05 Jul, 2018 8 commits
-
-
Matevz Vucnik authored
This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by:
Matevz Vucnik <vucnikm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Arun Kumar Neelakantam says: ==================== net: qrtr: Broadcasting control messages Allow messages only from control port to broadcast to avoid unnecessary messages and reset the node to local router NODE ID in control messages otherwise remote routers consider the packets as invalid and Drops it. ==================== Signed-off-by: -
Arun Kumar Neelakantam authored
All the control messages broadcast to remote routers are using QRTR_NODE_BCAST instead of using local router NODE ID which cause the packets to be dropped on remote router due to invalid NODE ID. Signed-off-by:
Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by:
-
Arun Kumar Neelakantam authored
The broadcast node id should only be sent with the control port id. Signed-off-by:
-
Paul Moore authored
At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: <IRQ> ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 </IRQ> ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Dan Carpenter authored
If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb ("qed*: Utilize FW 8.33.11.0") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Denis Bolotin authored
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Heiner Kallweit authored
Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
