- 17 Dec, 2019 40 commits
-
-
Miaoqing Pan authored
[ Upstream commit 08d80e4c ] On SMP platform, when continuously running wifi up/down, the napi poll can be scheduled during chip reset, which will call ath10k_pci_has_fw_crashed() to check the fw status. But in the reset period, the value from FW_INDICATOR_ADDRESS register will return 0xdeadbeef, which also be treated as fw crash. Fix the issue by moving chip reset after napi disabled. ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6) ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0 Tested HW: QCA9984,QCA9887,WCN3990 Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Helen Koike authored
[ Upstream commit ee1c71a8 ] If the system has other devices being registered in the component framework, the compare function will be called with a device that doesn't belong to vimc. This device is not necessarily a platform_device, nor have a platform_data (which causes a NULL pointer dereference error) and if it does have a pdata, it is not necessarily type of struct vimc_platform_data. So casting to any of these types is wrong. Instead of expecting a given pdev with a given pdata, just expect for the device it self. vimc-core is the one who creates them, we know in advance exactly which object to expect in the match. Fixes: 4a29b709 ("[media] vimc: Subdevices as modules") Signed-off-by:
Helen Koike <helen.koike@collabora.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Tested-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 83d57826 ] The driver tries to periodically refresh neighbours that are used to reach nexthops. This is done by periodically calling neigh_event_send(). However, if the neighbour becomes dead, there is nothing we can do to return it to a connected state and the above function call is basically a NOP. This results in the nexthop never being written to the device's adjacency table and therefore never used to forward packets. Fix this by dropping our reference from the dead neighbour and associating the nexthop with a new neigbhour which we will try to refresh. Fixes: a7ff87ac ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Alex Veber <alexve@mellanox.com> Tested-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit c68b901a ] The accumulator sample register is signed 32-bits wide register on droid 4. And only the earlier version of cpcap has a signed 24-bits wide register. We're currently passing it around as unsigned, so let's fix that and use sign_extend32() for the earlier revision. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Shirish S authored
[ Upstream commit 30aa3d26 ] The MC4_MISC thresholding quirk needs to be applied during S5 -> S0 and S3 -> S0 state transitions, which follow different code paths. Carve it out into a separate function and call it mce_amd_feature_init() where the two code paths of the state transitions converge. [ bp: massage commit message and the carved out function. ] Signed-off-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1547651417-23583-3-git-send-email-shirish.s@amd.comSigned-off-by:
-
Shirish S authored
[ Upstream commit c95b323d ] MC4_MISC thresholding is not supported on all family 0x15 processors, hence skip the x86_model check when applying the quirk. [ bp: massage commit message. ] Signed-off-by:
-
Luo Jiaxing authored
[ Upstream commit eb44e4d7 ] The SAS controller cannot support a programmed minimum linkrate of > 1.5G (it will always negotiate to 1.5G at least), so just reject it. This solves a strange situation where the PHY negotiated linkrate may be less than the programmed minimum linkrate. Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xiang Chen authored
[ Upstream commit 569eddcf ] Send primitive NOTIFY to SSP situation only, or it causes underflow issue when sending IO. Also rename hisi_sas_hw.sl_notify() to hisi_sas_hw. sl_notify_ssp(). Signed-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 676131f7 ] In hnae3_register_ae_dev(), ae_algo->ops is assigned to ae_dev->ops before check that ae_algo->ops is valid. And in hnae3_register_ae_algo(), missing check for ae_algo->ops. This patch fixes them. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
[ Upstream commit 74354140 ] hnae3_register_ae_dev() may fail, and it should return a error code to its caller, so change hnae3_register_ae_dev() return type to int. Also, when hnae3_register_ae_dev() return error, hns3_probe() should do some error handling and return the error code. Signed-off-by:
-
Jian Shen authored
[ Upstream commit ac864c23 ] When unload hns3 driver, we should clear the pci private data. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Karsten Graul authored
[ Upstream commit 33f3fcc2 ] smc_cdc_get_free_slot() might wait for free transfer buffers when using SMC-R. This wait should not be done under the send_lock, which is a spin_lock. This fixes a cpu loop in parallel threads waiting for the send_lock. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
[ Upstream commit 8c6c37fd ] To ensure parent qdiscs have the same notion of the number of enqueued packets even after splitting a GSO packet, update the qdisc tree with the number of packets that was added due to the split. Reported-by:
Pete Heist <pete@heistp.net> Tested-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Stefano Stabellini authored
[ Upstream commit d90a1ca6 ] When the ring is full, size == array_size. It is not an error condition, so simply return 0 instead of an error. Signed-off-by:
Stefano Stabellini <stefanos@xilinx.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit cd0d465b ] Fix a static code checker warning: drivers/net/ethernet/intel/e100.c:1349 e100_load_ucode_wait() warn: passing zero to 'PTR_ERR' Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 5816a093 ] Clang warns when an implicit conversion is done between enumerated types: drivers/block/drbd/drbd_state.c:708:8: warning: implicit conversion from enumeration type 'enum drbd_ret_code' to different enumeration type 'enum drbd_state_rv' [-Wenum-conversion] rv = ERR_INTR; ~ ^~~~~~~~ drbd_request_detach_interruptible's only call site is in the return statement of adm_detach, which returns an int. Change the return type of drbd_request_detach_interruptible to match, silencing Clang's warning. Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
James Smart authored
[ Upstream commit 76558b25 ] Driver missed classifying the chip type for G7 when reporting supported topologies. This resulted in loop being shown as supported on FC links that are not supported per the standard. Add the chip classifications to the topology checks in the driver. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit 1c36833d ] Driver is setting bits in word 10 of the SLI4 ABORT WQE (the wqid). The field was a carry over from a prior SLI revision. The field does not exist in SLI4, and the action may result in an overlap with future definition of the WQE. Remove the setting of WQID in the ABORT WQE. Also cleaned up WQE field settings - initialize to zero, don't bother to set fields to zero. Signed-off-by:
-
James Smart authored
[ Upstream commit 8b47ae69 ] Depending on the chipset, the number of NPIV vports may vary and be in excess of what most switches support (256). To avoid confusion with the users, limit the reported NPIV vports to 256. Additionally correct the 16G adapter which is reporting a bogus NPIV vport number if the link is down. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 2398c41d ] With a wl1251 child node of mmc3 in the device tree decoded in omap_hsmmc.c to handle special wl1251 initialization, we do no longer need to instantiate the mmc3 through pdata quirks. We also can remove the wlan regulator and reset/interrupt definitions and do them through device tree. Fixes: 81eef6ca ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 5c388abe ] We can't use "port->sw" and/or "port->mux" after it has been freed. Fixes: 23481121 ("usb: typec: class: Don't use port parent for getting mux handles") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: stable <stable@vger.kernel.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191126140452.14048-1-wenyang@linux.alibaba.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit bd82873f ] spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d4570 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.comSigned-off-by:
-
Quinn Tran authored
[ Upstream commit af2a0c51 ] when GPSC/GPDB switch command fails, driver just returns without doing a proper cleanup. This patch fixes this memory leak by calling sp->free() in the error path. Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Himanshu Madhani authored
[ Upstream commit da48b824 ] This patch updates log message which indicates number of vectors used by the driver instead of displaying failure to get maximum requested vectors. Driver will always request maximum vectors during initialization. In the event driver is not able to get maximum requested vectors, it will adjust the allocated vectors. This is normal and does not imply failure in driver. Signed-off-by:
Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/20190830222402.23688-2-hmadhani@marvell.comSigned-off-by:
-
Bart Van Assche authored
[ Upstream commit e6803efa ] This patch fixes several Coverity complaints about not always checking the qla2x00_wait_for_hba_online() return value. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
-
Bart Van Assche authored
[ Upstream commit c29282c6 ] Set the r??_data_len variables before using these instead of after. This patch fixes the following Coverity complaint: const: At condition req_data_len != rsp_data_len, the value of req_data_len must be equal to 0. const: At condition req_data_len != rsp_data_len, the value of rsp_data_len must be equal to 0. dead_error_condition: The condition req_data_len != rsp_data_len cannot be true. Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: a9b6f722 ("[SCSI] qla2xxx: Implementation of bidirectional.") # v3.7. Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit ac452b8e ] Pass the correct session ID to find_sess_by_s_id() instead of passing an uninitialized variable. Cc: Himanshu Madhani <hmadhani@marvell.com> Fixes: 2d70c103 ("[SCSI] qla2xxx: Add LLD target-mode infrastructure for >= 24xx series") # v3.5. Signed-off-by:
-
Quinn Tran authored
[ Upstream commit f00b3428 ] A hang was observed in the fcport delete path when the device was responding slow and an issue-lip path (results in session termination) was taken. Fix this by issuing logo requests unconditionally. PID: 19491 TASK: ffff8e23e67bb150 CPU: 0 COMMAND: "kworker/0:0" #0 [ffff8e2370297bf8] __schedule at ffffffffb4f7dbb0 #1 [ffff8e2370297c88] schedule at ffffffffb4f7e199 #2 [ffff8e2370297c98] schedule_timeout at ffffffffb4f7ba68 #3 [ffff8e2370297d40] msleep at ffffffffb48ad9ff #4 [ffff8e2370297d58] qlt_free_session_done at ffffffffc0c32052 [qla2xxx] #5 [ffff8e2370297e20] process_one_work at ffffffffb48bcfdf #6 [ffff8e2370297e68] worker_thread at ffffffffb48bdca6 #7 [ffff8e2370297ec8] kthread at ffffffffb48c4f81 Signed-off-by:
-
Himanshu Madhani authored
[ Upstream commit 5d328de6 ] With debug kernel we see following wanings indicating memory leak. [28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978 dma_debug_device_change+0x166/0x1d0 [28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA allocations while released from device [count=5] [28809.523964] One of leaked entries details: [device address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fix this by unmapping DMA memory. Signed-off-by:
-
Steffen Maier authored
[ Upstream commit 100843f1 ] While v2.6.26 commit b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace") is right that we don't want to flood the (payload) trace ring buffer, we don't trace successful FCP command responses by default. So we can include the channel log for problem determination with failed responses of any FSF request type. Fixes: b75db731 ("[SCSI] zfcp: Add qtcb dump to hba debug trace") Fixes: a54ca0f6 ("[SCSI] zfcp: Redesign of the debug tracing for HBA records.") Cc: <stable@vger.kernel.org> #2.6.38+ Link: https://lore.kernel.org/r/e37597b5c4ae123aaa85fd86c23a9f71e994e4a9.1572018132.git.bblock@linux.ibm.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Ming Lei authored
commit 2a5cf35c upstream. There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d0 ("blk-mq: fix discard merge with scheduler attached") Reported-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Jeff Mahoney authored
commit 60e4cf67 upstream. Since commit d0a5b995 (vfs: Add IOP_XATTR inode operations flag) extended attributes haven't worked on the root directory in reiserfs. This is due to reiserfs conditionally setting the sb->s_xattrs handler array depending on whether it located or create the internal privroot directory. It necessarily does this after the root inode is already read in. The IOP_XATTR flag is set during inode initialization, so it never gets set on the root directory. This commit unconditionally assigns sb->s_xattrs and clears IOP_XATTR on internal inodes. The old return values due to the conditional assignment are handled via open_xa_root, which now returns EOPNOTSUPP as the VFS would have done. Link: https://lore.kernel.org/r/20191024143127.17509-1-jeffm@suse.com CC: stable@vger.kernel.org Fixes: d0a5b995 ("vfs: Add IOP_XATTR inode operations flag") Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 65db869c upstream. Estimate for the number of credits needed for final freeing of inode in ext4_evict_inode() was to small. We may modify 4 blocks (inode & sb for orphan deletion, bitmap & group descriptor for inode freeing) and not just 3. [ Fixed minor whitespace nit. -- TYT ] Fixes: e50e5129 ("ext4: xattr-in-inode support") CC: stable@vger.kernel.org Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dmitry Monakhov authored
commit 6ff33d99 upstream. Write only quotas which are dirty at entry. XFSTEST: https://github.com/dmonakhov/xfstests/commit/b10ad23566a5bf75832a6f500e1236084083cddc Link: https://lore.kernel.org/r/20191031103920.3919-1-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by:
-
Chengguang Xu authored
commit e705f4b8 upstream. Check err when partial == NULL is meaningless because partial == NULL means getting branch successfully without error. CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191105045100.7104-1-cgxu519@mykernel.netSigned-off-by:
Chengguang Xu <cgxu519@mykernel.net> Signed-off-by:
-
Dmitry Monakhov authored
commit df4bb5d1 upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
commit 6039f37d upstream. The bar values are little endian, not big endian. The pack function did it right but the unpack got it wrong. Fix it. Cc: stable@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Martin Bugge <marbugge@cisco.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Fixes: 2c676f37 ("[media] hdmi: added unpack and logging functions for InfoFrames") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190919132853.30954-1-ville.syrjala@linux.intel.comReviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Cédric Le Goater authored
commit b67a95f2 upstream. The PCI INTx interrupts and other LSI interrupts are handled differently under a sPAPR platform. When the interrupt source characteristics are queried, the hypervisor returns an H_INT_ESB flag to inform the OS that it should be using the H_INT_ESB hcall for interrupt management and not loads and stores on the interrupt ESB pages. A default -1 value is returned for the addresses of the ESB pages. The driver ignores this condition today and performs a bogus IO mapping. Recent changes and the DEBUG_VM configuration option make the bug visible with : kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=1024 NUMA pSeries Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.0-0.rc6.git0.1.fc32.ppc64le #1 NIP: c000000000f63294 LR: c000000000f62e44 CTR: 0000000000000000 REGS: c0000000fa45f0d0 TRAP: 0700 Not tainted (5.4.0-0.rc6.git0.1.fc32.ppc64le) ... NIP ioremap_page_range+0x4c4/0x6e0 LR ioremap_page_range+0x74/0x6e0 Call Trace: ioremap_page_range+0x74/0x6e0 (unreliable) do_ioremap+0x8c/0x120 __ioremap_caller+0x128/0x140 ioremap+0x30/0x50 xive_spapr_populate_irq_data+0x170/0x260 xive_irq_domain_map+0x8c/0x170 irq_domain_associate+0xb4/0x2d0 irq_create_mapping+0x1e0/0x3b0 irq_create_fwspec_mapping+0x27c/0x3e0 irq_create_of_mapping+0x98/0xb0 of_irq_parse_and_map_pci+0x168/0x230 pcibios_setup_device+0x88/0x250 pcibios_setup_bus_devices+0x54/0x100 __of_scan_bus+0x160/0x310 pcibios_scan_phb+0x330/0x390 pcibios_init+0x8c/0x128 do_one_initcall+0x60/0x2c0 kernel_init_freeable+0x290/0x378 kernel_init+0x2c/0x148 ret_from_kernel_thread+0x5c/0x80 Fixes: bed81ee1 ("powerpc/xive: introduce H_INT_ESB hcall") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Cédric Le Goater <clg@kaod.org> Tested-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191203163642.2428-1-clg@kaod.orgSigned-off-by:
-
Alastair D'Silva authored
commit 29430fae upstream. When calling flush_icache_range with a size >4GB, we were masking off the upper 32 bits, so we would incorrectly flush a range smaller than intended. This patch replaces the 32 bit shifts with 64 bit ones, so that the full size is accounted for. Signed-off-by:
Alastair D'Silva <alastair@d-silva.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Cédric Le Goater authored
commit 1ca3dec2 upstream. When the machine crash handler is invoked, all interrupts are masked but interrupts which have not been started yet do not have an ESB page mapped in the Linux address space. This crashes the 'crash kexec' sequence on sPAPR guests. To fix, force the mapping of the ESB page when an interrupt is being mapped in the Linux IRQ number space. This is done by setting the initial state of the interrupt to OFF which is not necessarily the case on PowerNV. Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
