- 23 Jan, 2018 5 commits
-
-
Ville Syrjälä authored
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle. Note that this replaces crtc_state->adjusted_mode usage with crtc_state->mode. The latter is the correct choice since that's the mode the user provided and it matches the plane crtc coordinates the user also provided. Once everyone agrees on this we can move the clip handling into drm_atomic_helper_check_plane_state(). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-5-ville.syrjala@linux.intel.comAcked-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
Thierry Reding <treding@nvidia.com>
-
Ville Syrjälä authored
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle. Note that this replaces crtc_state->adjusted_mode usage with crtc_state->mode. The latter is the correct choice since that's the mode the user provided and it matches the plane crtc coordinates the user also provided. Once everyone agrees on this we can move the clip handling into drm_atomic_helper_check_plane_state(). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Signed-off-by:
-
Ville Syrjälä authored
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle. No functional changes since pipe_src_w/h are already filled via drm_mode_get_hv_timing(). Once everyone agrees on this we can move the clip handling into drm_atomic_helper_check_plane_state(). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Ville Syrjälä authored
In order to guarantee that pipe_src_w/h matches the user mode h/vdisplay we must not adjust pipe_src_w to accommodate double wide/dual link. Instead just reject the mode outright. This will allows us to rely on crtc_state->mode for plane clipping. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sean Paul authored
Fixes the following build warnings: In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0, from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.h:13, from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.c:12: ../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration struct drm_crtc_state *old_state); ^~~~~~~~~~~~~~ ../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration struct drm_crtc_state *state); ^~~~~~~~~~~~~~ In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0, from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.h:12, from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.c:12: ../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration struct drm_crtc_state *old_state); ^~~~~~~~~~~~~~ ../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration struct drm_crtc_state *state); ^~~~~~~~~~~~~~ Fixes: 6b8562c8 ("drm/sun4i: engine: Create an atomic_begin callback") Fixes: 656e5f65 ("drm/sun4i: engine: Add a custom crtc atomic_check") Cc: Chen-Yu Tsai <wens@csie.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:Sean Paul <seanpaul@chromium.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180122174306.231609-1-seanpaul@chromium.org
-
- 22 Jan, 2018 13 commits
-
-
Sean Paul authored
A couple more return value fixes which Philippe brought up during our previous review. Suggested-by:
Philippe CORNU <philippe.cornu@st.com> Reviewed-by:
-
Maxime Ripard authored
If we try to read the backend registers while it fetches the new values, we end up with the value of some random register instead of the one we asked for. In order to prevent that, let's make sure that the very first thing we do during our atomic modesetting is to let the commit bit come to a rest. We don't have to worry about anything else since the only time we will trigger a new transaction is during the atomic_commit which comes much later. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Maxime Ripard authored
During a hardware commit, the commit bit in the backend will only be cleared if the TCON is enabled. Use the runtime_pm variant of the atomic_commit_tail hook that makes sure that the CRTC, our TCON, is enabled when we perform an atomic_commit. Reviewed-by:
-
Maxime Ripard authored
Now that we have everything in place, we can start enabling the frontend. This is more difficult than one would assume since there can only be one plane using the frontend per-backend. We therefore need to make sure that the userspace will not try to setup multiple planes using it, since that would be impossible. In order to prevent that, we can create an atomic_check callback that will check that only one plane will effectively make use of the frontend in a given configuration, and will toggle the switch in that plane state so that the proper setup function can do their role. Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Maxime Ripard authored
Now that we have a driver, we can make use of it. This is done by adding a flag to our custom plane state that will trigger whether we should use the frontend on that particular plane or not. The rest is just plumbing to set up the backend to not perform the DMA but receive its data from the frontend. Note that we're still not making any use of the frontend itself, as no one is setting the flag yet. Reviewed-by:
-
Maxime Ripard authored
The display frontend is an hardware block that can be used to implement some more advanced features like hardware scaling or colorspace conversions. It can also be used to implement the output format of the VPU. Let's create a minimal driver for it that will only enable the hardware scaling features. Reviewed-by:
-
Maxime Ripard authored
We have to implement some display engine specific behaviours in atomic_begin. Let's add a function for that. Reviewed-by:
-
Maxime Ripard authored
In some cases, the display engine needs to apply some quirks during the VBLANK event. In the Display Engine 1.0 case for example, we can only disable the frontend once the backend has been, which is at VBLANK. Let's introduce a callback that can be implemented by the various engines. Reviewed-by:
-
Maxime Ripard authored
We have some restrictions on what the planes and CRTC can provide that are tied to only one generation of display engines. For example, on the first generation, we can only have one YUV plane or one plane that uses the frontend output. Let's allow our engines to provide an atomic_check callback to validate the current configuration. Reviewed-by:
-
Maxime Ripard authored
We will need to store some additional data in the future to the state. Create a custom plane state that will embed those data, in order to store the pipe or whether or not that plane should use the frontend. Reviewed-by:
-
Maxime Ripard authored
The function converting the DRM format to its equivalent in the backend registers was assuming that we were having a plane. However, we might want to use that function when setting up a plane using the frontend, in which case we will not have a plane associated to the backend's layer. Yet, we still need to setup the format to the one output by the frontend. Test for NULL plane pointers before referencing them, so that we can work around it. Reviewed-by:
-
Maxime Ripard authored
Our operations were missing some documentation to explain what was expected from them. Let's make that clearer. Reviewed-by:
-
Maxime Ripard authored
Setup the line stride in the buffer setup function, since it's tied to the buffer itself, and is not needed when we do not set the buffer in the backend. This is for example the case when using the frontend and then routing its output to the backend. Reviewed-by:
-
- 19 Jan, 2018 2 commits
-
-
Sean Paul authored
It's been a while since we've backmerged drm-next. Dave just brought back 4.15-rc8, so now's a good time to freshen things up around here. Signed-off-by: -
Samuel Li authored
Signed-off-by:
Samuel Li <Samuel.Li@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1516311860-24949-1-git-send-email-Samuel.Li@amd.com
-
- 18 Jan, 2018 3 commits
-
-
Andy Shevchenko authored
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031142149.32512-8-andriy.shevchenko@linux.intel.comAcked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Andy Shevchenko authored
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Andy Shevchenko authored
Since i2c_unregister_device() became NULL-aware we may remove duplicate NULL check. Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
- 17 Jan, 2018 2 commits
-
-
Dave Airlie authored
Linux 4.15-rc8 Daniel requested this for so the intel CI won't fall over on drm-next so often.
-
Sean Paul authored
Return value for mipi_dsi_shutdown_peripheral() is unchecked. Check it and return any errors if they come up. Even if mipi_dsi_shutdown_peripheral() fails, continue attempting to disable. Cc: Philippe Cornu <philippe.cornu@st.com> Reviewed-by:
-
- 16 Jan, 2018 4 commits
-
-
Philippe Cornu authored
The function mipi_dsi_device_transfer() returns the number of transmitted or received bytes on success or a negative error code on failure. The functions mipi_dsi_shutdown_peripheral(), mipi_dsi_turn_on_peripheral() & mipi_dsi_set_maximum_return_packet_size() use improperly this returned value in case of success: 0 should be returned instead of the number of transmitted bytes. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Brian Norris authored
We're filling the "remainder" word with little-endian data, then writing it out to IO registers with endian-correcting writel(). That probably won't work on big-endian systems. Let's mark the "remainder" variable as LE32 (since we fill it with memcpy()) and do the swapping explicitly. Some of this function could be done more easily without memcpy(), but the unaligned "remainder" case is a little hard to do without potentially overrunning 'tx_buf', so I just applied the same solution in all cases (memcpy() + le32_to_cpu()). Tested only on a little-endian system. Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-2-briannorris@chromium.org
-
Brian Norris authored
This takes care of 2 TODOs in this driver, by using the common DSI packet-marshalling code instead of our custom short/long write code. This both saves us some duplicated code and gets us free support for command types that weren't already part of our switch block (e.g., MIPI_DSI_GENERIC_LONG_WRITE). The code logic stays mostly intact, except that it becomes unnecessary to split the short/long write functions, and we have to copy data a bit more. Along the way, I noticed that loop bounds were a little odd: while (DIV_ROUND_UP(len, pld_data_bytes)) This really was just supposed to be 'len != 0', so I made that more clear. Tested on RK3399 with some pending refactoring patches by Nickey Yang, to make the Rockchip DSI driver wrap this common driver. Signed-off-by:
-
Brian Norris authored
sparse complains: drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c:703:6: warning: symbol 'dw_mipi_dsi_bridge_mode_set' was not declared. Should it be static? Reviewed-by:
-
- 15 Jan, 2018 7 commits
-
-
Noralf Trønnes authored
The MIPI DBI spec states that reset active/low time should be more than 9us. Change from 20ms to 20us. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
David Lechner <david@lechnology.com> Tested-by:
-
Noralf Trønnes authored
Embed the mode in tinydrm_connector instead of doing an devm_ allocation. Remove unnecessary use of ret variable at the end of tinydrm_display_pipe_init(). Signed-off-by:
-
Noralf Trønnes authored
It's better to leave power handling and controller init to the modesetting machinery using the simple pipe .enable and .disable callbacks. Remove unused mipi_dbi_pipe_enable(). Signed-off-by:
-
Noralf Trønnes authored
Split out common poweron-reset functionality. Signed-off-by:
-
Noralf Trønnes authored
Add and use a function for enabling, flushing and turning on backlight. Signed-off-by:
-
Noralf Trønnes authored
No need for a public header file for the command macros. Just include the necessary ones in the driver. Also use the MIPI_DCS_PIXEL_FMT_16BIT macro. Signed-off-by:
-
Noralf Trønnes authored
Include linux headers before drm headers as it's commonly done. Signed-off-by:
-
- 14 Jan, 2018 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixlet from Thomas Gleixner. Remove a warning about lack of compiler support for retpoline that most people can't do anything about, so it just annoys them needlessly. * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retpoline: Remove compile time warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix for an oops at boot if we take a hotplug interrupt before we are ready to handle it. The bulk is patches to implement mitigation for Meltdown, see the change logs for more details. Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon Masters, Jose Ricardo Ziviani, David Gibson" * tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Check device-tree for RFI flush settings powerpc/pseries: Query hypervisor for RFI flush settings powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti powerpc/64s: Add support for RFI flush of L1-D cache powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL powerpc/64s: Simple RFI macro conversions powerpc/64: Add macros for annotating the destination of rfid/hrfid powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ
-
Thomas Gleixner authored
Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler does not have retpoline support. Linus rationale for this is: It's wrong because it will just make people turn off RETPOLINE, and the asm updates - and return stack clearing - that are independent of the compiler are likely the most important parts because they are likely the ones easiest to target. And it's annoying because most people won't be able to do anything about it. The number of people building their own compiler? Very small. So if their distro hasn't got a compiler yet (and pretty much nobody does), the warning is just annoying crap. It is already properly reported as part of the sysfs interface. The compile-time warning only encourages bad things. Fixes: 76b04384 ("x86/retpoline: Add initial retpoline support") Requested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: gnomes@lxorguk.ukuu.org.uk Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: thomas.lendacky@amd.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kees Cook <keescook@google.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com
-
