- 07 Oct, 2015 20 commits
-
-
David Ahern authored
If the user specifies a VRF device in a get route query the custom route pointing to the VRF device is returned: $ ip route ls table vrf-red unreachable default broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev vrf-red cache Add the flags to skip the custom route and go directly to the FIB. With this patch the actual route is returned: $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev eth1 src 10.2.1.2 cache Signed-off-by:David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the current cycle, we have the following right now: * many internal fixes, API improvements, cleanups, etc. * full AP client state tracking in cfg80211/mac80211 from Ayala * VHT support (in mac80211) for mesh * some A-MSDU in A-MPDU support from Emmanuel * show current TX power to userspace (from Rafał) * support for netlink dump in vendor commands (myself) ==================== Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: Add saddr op to l3mdev and vrf First 2 patches are re-sends of patches that got lost in the ethosphere Tuesday; they were part of the first round of l3mdev conversions. Next 3 handle the source address lookup for raw and datagram sockets bound to a VRF device. The conversion to the get_saddr op also fixes locally originated TCP packets showing up at the VRF device. The use of the FLOWI_FLAG_L3MDEV_SRC flag in ip_route_connect_init was causing locally generated packets to skip the VRF device. v2 - rebased to top of net-next per device delete fix and hash based multipath patches ==================== Signed-off-by: -
David Ahern authored
ping originated on box through a VRF device is showing up in tcpdump without a source address: $ tcpdump -n -i vrf-blue 08:58:33.311303 IP 0.0.0.0 > 10.2.2.254: ICMP echo request, id 2834, seq 1, length 64 08:58:33.311562 IP 10.2.2.254 > 10.2.2.2: ICMP echo reply, id 2834, seq 1, length 64 Add the call to l3mdev_get_saddr to raw_sendmsg. Signed-off-by: -
David Ahern authored
Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by:
-
David Ahern authored
VRF device needs the same path selection following lookup to set source address. Rather than duplicating code, move existing code into a function that is exported to modules. Code move only; no functional change. Signed-off-by:
-
David Ahern authored
IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by:
-
David Ahern authored
Signed-off-by:
-
David Ahern authored
It occurred to me yesterday that 741a11d9 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b ("xfrm: Add oif to dst lookups") Signed-off-by:
-
Claudiu Manoil authored
This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
Enable the "wake-on-filer" (aka. wake on user defined packet) wake on lan capability for the eTSEC ethernet nodes. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
-
Claudiu Manoil authored
Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== openvswitch: add IPv6 tunneling support This builds on the previous work that added IPv6 support to lwtunnels and adds IPv6 tunneling support to ovs. To use IPv6 tunneling, there needs to be a metadata based tunnel net_device created and added to the ovs bridge. Currently, only vxlan is supported by the kernel, with geneve to follow shortly. There's no need nor intent to add a support for this into the vport-vxlan (etc.) compat layer. v3: dropped the last two patches added in v2. ==================== Signed-off-by: -
Jiri Benc authored
Add netlink attributes for IPv6 tunnel addresses. This enables IPv6 support for tunnels. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Jiri Benc authored
Store tunnel protocol (AF_INET or AF_INET6) in sw_flow_key. This field now also acts as an indicator whether the flow contains tunnel data (this was previously indicated by tun_key.u.ipv4.dst being set but with IPv6 addresses in an union with IPv4 ones this won't work anymore). The new field was added to a hole in sw_flow_key. Signed-off-by:
-
Nikolay Aleksandrov authored
When KASAN is enabled the frame size grows > 2048 bytes and we get a warning, so make it smaller. net/bridge/br_netlink.c: In function 'br_fill_info': >> net/bridge/br_netlink.c:1110:1: warning: the frame size of 2160 bytes >> is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
Add support for filtering neighbor dumps by device by adding the NDA_IFINDEX attribute to the dump request. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-03 This series contains updates to i40e and i40evf, some of which are to resolve more Red Hat bugzilla issues. Jiang Liu updates the i40e and i40evf drivers to use numa_mem_id() instead of numa_node_id() to get the nearest node with memory which better supports memoryless nodes. Anjali fixes an issue from Dan Carpenter <dan.carpenter@oracle.com>, to resolve a memory leak in X722 RSS configuration path, where we should free the memory allocated before exiting. Shannon modifies the drivers to ensure we have the spinlocks before we clear the ARQ and ASQ management registers. In addition, we widen the locked portion insert a sanity check to ensure we are working with safe register values. Mitch fixes an issue where under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this occurs, we need to parse it because our VSI may have changed and that will affect the relationship with the PF driver. But this parsing also blows away our current MAC address, so resolve the issue by restoring the current MAC address from the netdev struct after we parse the resource message. ==================== Signed-off-by: -
Russell King authored
Add additional error reporting to the generic DSA code, so it's easier to debug when things go wrong. This was useful when initially bringing up 88e6176 on a new board. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Russell King authored
The link status is polled by the generic phy layer, there's no need to duplicate that polling with additional polling. This additional polling adds additional MDIO traffic, and races with the generic phy layer, resulting in missing or duplicated link status messages. Tested-by:
-
- 06 Oct, 2015 4 commits
-
-
David S. Miller authored
This reverts commit 7741c373.
-
David S. Miller authored
This reverts commit 04fbfce7.
-
David S. Miller authored
This reverts commit 9886ce2b.
-
Peter Nørlund authored
This fixes net/built-in.o: In function `fib_rebalance': fib_semantics.c:(.text+0x9df14): undefined reference to `__divdi3' and net/built-in.o: In function `fib_rebalance': net/ipv4/fib_semantics.c:572: undefined reference to `__aeabi_ldivmod' Fixes: 0e884c78 ("ipv4: L3 hash-based multipath") Signed-off-by:
Peter Nørlund <pch@ordbogen.com> Signed-off-by:
-
- 05 Oct, 2015 16 commits
-
-
Andrzej Hajda authored
The function returns always non-negative values. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Daniel Borkmann authored
Commit ea317b26 ("bpf: Add new bpf map type to store the pointer to struct perf_event") added perf_event.h to the main eBPF header, so it gets included for all users. perf_event.h is actually only needed from array map side, so lets sanitize this a bit. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Kaixu Xia <xiakaixu@huawei.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Nicolas Schichan authored
For ARMv7 with UDIV instruction support, generate an UDIV instruction followed by an MLS instruction. For other ARM variants, generate code calling a C wrapper similar to the jit_udiv() function used for BPF_ALU | BPF_DIV instructions. Some performance numbers reported by the test_bpf module (the duration per filter run is reported in nanoseconds, between "jitted:<x>" and "PASS": ARMv7 QEMU nojit: test_bpf: #3 DIV_MOD_KX jited:0 2196 PASS ARMv7 QEMU jit: test_bpf: #3 DIV_MOD_KX jited:1 104 PASS ARMv5 QEMU nojit: test_bpf: #3 DIV_MOD_KX jited:0 2176 PASS ARMv5 QEMU jit: test_bpf: #3 DIV_MOD_KX jited:1 1104 PASS ARMv5 kirkwood nojit: test_bpf: #3 DIV_MOD_KX jited:0 1103 PASS ARMv5 kirkwood jit: test_bpf: #3 DIV_MOD_KX jited:1 311 PASS Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
David S. Miller authored
Mark Craske says: ==================== Improve ASIX RX memory allocation error handling The ASIX RX handler algorithm is weak on error handling. There is a design flaw in the ASIX RX handler algorithm because the implementation for handling RX Ethernet frames for the DUB-E100 C1 can have Ethernet frames spanning multiple URBs. This means that payload data from more than 1 URB is sometimes needed to fill the socket buffer with a complete Ethernet frame. When the URB with the start of an Ethernet frame is received then an attempt is made to allocate a socket buffer. If the memory allocation fails then the algorithm sets the buffer pointer member to NULL and the function exits (no crash yet). Subsequently, the RX hander is called again to process the next URB which assumes there is a socket buffer available and the kernel crashes when there is no buffer. This patchset implements an improvement to the RX handling algorithm to avoid a crash when no memory is available for the socket buffer. The patchset will apply cleanly to the net-next master branch but the created kernel has not been tested. The driver was tested on ARM kernels v3.8 and v3.14 for a commercial product. ==================== Signed-off-by: -
Dean Jenkins authored
Avoid a loss of synchronisation of the Ethernet Data header 32-bit word due to a failure to get a netdev socket buffer. The ASIX RX handling algorithm returned 0 upon a failure to get an allocation of a netdev socket buffer. This causes the URB processing to stop which potentially causes a loss of synchronisation with the Ethernet Data header 32-bit word. Therefore, subsequent processing of URBs may be rejected due to a loss of synchronisation. This may cause additional good Ethernet frames to be discarded along with outputting of synchronisation error messages. Implement a solution which checks whether a netdev socket buffer has been allocated before trying to copy the Ethernet frame into the netdev socket buffer. But continue to process the URB so that synchronisation is maintained. Therefore, only a single Ethernet frame is discarded when no netdev socket buffer is available. Signed-off-by:
Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by:
Mark Craske <Mark_Craske@mentor.com> Signed-off-by:
-
Dean Jenkins authored
When RX Ethernet frames span multiple URB socket buffers, the data stream may suffer a discontinuity which will cause the current Ethernet frame in the netdev socket buffer to be incomplete. This frame needs to be discarded instead of appending unrelated data from the current URB socket buffer to the Ethernet frame in the netdev socket buffer. This avoids creating a corrupted Ethernet frame in the netdev socket buffer. A discontinuity can occur when the previous URB socket buffer held an incomplete Ethernet frame due to truncation or a URB socket buffer containing the end of the Ethernet frame was missing. Therefore, add a sanity test for when an Ethernet frame spans multiple URB socket buffers to check that the remaining bytes of the currently received Ethernet frame point to a good Data header 32-bit word of the next Ethernet frame. Upon error, reset the remaining bytes variable to zero and discard the current netdev socket buffer. Assume that the Data header is located at the start of the current socket buffer and attempt to process the next Ethernet frame from there. This avoids unnecessarily discarding a good URB socket buffer that contains a new Ethernet frame. Signed-off-by:
-
Dean Jenkins authored
The code is checking that the Ethernet frame will fit into a netdev allocated socket buffer within the constraints of MTU size, Ethernet header length plus VLAN header length. The original code was checking rx->remaining each loop of the while loop that processes multiple Ethernet frames per URB and/or Ethernet frames that span across URBs. rx->remaining decreases per while loop so there is no point in potentially checking multiple times that the Ethernet frame (remaining part) will fit into the netdev socket buffer. The modification checks that the size of the Ethernet frame will fit the netdev socket buffer before allocating the netdev socket buffer. This avoids grabbing memory and then deciding that the Ethernet frame is too big and then freeing the memory. Signed-off-by:
-
Dean Jenkins authored
Tidy-up the Data header 32-bit word synchronisation logic in asix_rx_fixup_internal() by removing redundant logic tests. The code is looking at the following cases of the Data header 32-bit word that is present before each Ethernet frame: a) all 32 bits of the Data header word are in the URB socket buffer b) first 16 bits of the Data header word are at the end of the URB socket buffer c) last 16 bits of the Data header word are at the start of the URB socket buffer eg. split_head = true Note that the lifetime of rx->split_head exists outside of the function call and is accessed per processing of each URB. Therefore, split_head being true acts on the next URB to be processed. To check for b) the offset will be 16 bits (2 bytes) from the end of the buffer then indicate split_head is true. To check for c) split_head must be true because the first 16 bits have been found. To check for a) else c) Note that the || logic of the old code included the state (skb->len - offset == sizeof(u16) && rx->split_head) which is not possible because the split_head cannot be true whilst checking for b). This is because the split_head indicates that the first 16 bits have been found and that is not possible whilst checking for the first 16 bits. Therefore simplify the logic. Signed-off-by:
-
Dean Jenkins authored
The Data header synchronisation is easier to understand if the variables "remaining" and "size" are renamed. Therefore, the lifetime of the "remaining" variable exists outside of asix_rx_fixup_internal() and is used to indicate any remaining pending bytes of the Ethernet frame that need to be obtained from the next socket buffer. This allows an Ethernet frame to span across multiple socket buffers. "size" is now local to asix_rx_fixup_internal() and contains the size read from the Data header 32-bit word. Add "copy_length" to hold the number of the Ethernet frame bytes (maybe a part of a full frame) that are to be copied out of the socket buffer. Signed-off-by:
-
Daniel Borkmann authored
The current ongoing effort to dump existing cBPF seccomp filters back to user space requires to hold the pre-transformed instructions like we do in case of socket filters from sk_attach_filter() side, so they can be reloaded in original form at a later point in time by utilities such as criu. To prepare for this, simply extend the bpf_prog_create_from_user() API to hold a flag that tells whether we should store the original or not. Also, fanout filters could make use of that in future for things like diag. While fanout filters already use bpf_prog_destroy(), move seccomp over to them as well to handle original programs when present. Signed-off-by:
Tycho Andersen <tycho.andersen@canonical.com> Acked-by:
-
WANG Cong authored
This fixes: tried to remove device ip6gre0 from (null) ------------[ cut here ]------------ kernel BUG at net/core/dev.c:5219! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 3 PID: 161 Comm: kworker/u8:2 Not tainted 4.3.0-rc2+ #1142 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff8800d784a9c0 ti: ffff8800d74a4000 task.ti: ffff8800d74a4000 RIP: 0010:[<ffffffff817f0797>] [<ffffffff817f0797>] __netdev_adjacent_dev_remove+0x40/0xec RSP: 0018:ffff8800d74a7a98 EFLAGS: 00010282 RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88011adcf701 RSI: ffff88011adccbf8 RDI: ffff88011adccbf8 RBP: ffff8800d74a7ab8 R08: 0000000000000001 R09: 0000000000000000 R10: ffffffff81d190ff R11: 00000000ffffffff R12: ffff8800d599e7c0 R13: 0000000000000000 R14: ffff8800d599e890 R15: ffffffff82385e00 FS: 0000000000000000(0000) GS:ffff88011ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007ffd6f003000 CR3: 000000000220c000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff8800d599e7c0 0000000000000b00 ffff8800d599e8a0 ffff8800d74a7ad8 ffffffff817f0861 0000000000000000 ffff8800d599e7c0 ffff8800d74a7af8 ffffffff817f088f 0000000000000000 ffff8800d599e7c0 Call Trace: [<ffffffff817f0861>] __netdev_adjacent_dev_unlink+0x1e/0x35 [<ffffffff817f088f>] __netdev_adjacent_dev_unlink_neighbour+0x17/0x41 [<ffffffff817f56e6>] netdev_upper_dev_unlink+0x6c/0x13d [<ffffffff81674a3d>] vrf_del_slave+0x26/0x7d [<ffffffff81674ac3>] vrf_device_event+0x2f/0x34 [<ffffffff81098c40>] notifier_call_chain+0x75/0x9c [<ffffffff81098fa2>] raw_notifier_call_chain+0x14/0x16 [<ffffffff817ee129>] call_netdevice_notifiers_info+0x52/0x59 [<ffffffff817f179d>] call_netdevice_notifiers+0x13/0x15 [<ffffffff817f6f18>] rollback_registered_many+0x14f/0x24f [<ffffffff817f70f2>] unregister_netdevice_many+0x19/0x64 [<ffffffff819a2455>] ip6gre_exit_net+0x163/0x177 [<ffffffff817eb019>] ops_exit_list+0x44/0x55 [<ffffffff817ebcb7>] cleanup_net+0x193/0x226 [<ffffffff81091e1c>] process_one_work+0x26c/0x4d8 [<ffffffff81091d20>] ? process_one_work+0x170/0x4d8 [<ffffffff81092296>] worker_thread+0x1df/0x2c2 [<ffffffff810920b7>] ? process_scheduled_works+0x2f/0x2f [<ffffffff810920b7>] ? process_scheduled_works+0x2f/0x2f [<ffffffff81097a20>] kthread+0xd4/0xdc [<ffffffff810bc523>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff8109794c>] ? __kthread_parkme+0x83/0x83 [<ffffffff81a5240f>] ret_from_fork+0x3f/0x70 [<ffffffff8109794c>] ? __kthread_parkme+0x83/0x83 Fixes: 93a7e7e8 ("net: Remove the now unused vrf_ptr") Cc: David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
kbuild test robot authored
Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Jon Ringle authored
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdfSigned-off-by:
Jon Ringle <jringle@gridpoint.com> Signed-off-by:
-
Jon Ringle authored
This commit allows installing a custom reg_update_bits function for cases where the hardware provides a mechanism to set or clear register bits without a read/modify/write cycle. Such is the case with the Microchip ENCX24J600. Signed-off-by:
-
Govindarajulu Varadarajan authored
The current code invokes hang reset in case of error interrupt. We should hang reset only in case of tx timeout. This because of the way hang reset is implemented in firmware. Hang reset takes more firmware resources than soft reset. Adaptor does not generate error interrupt in case of tx timeout. Hang reset only in case of tx timeout, in .ndo_tx_timeout. Do soft reset otherwise. Introduce deferred work, enic_tx_hang_reset, to do hang reset. Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
Some of the enic adaptors are know to generate spurious interrupts. When error interrupt is generated, driver just resets the device. This patch resets the device only when an error is occurred. Signed-off-by:
-
