- 12 Jun, 2019 18 commits
-
-
Daniel Vetter authored
Except for driver bugs (which we'll catch with a WARN_ON) this is only to report failures of the new driver taking over the console. There's nothing the outgoing driver can do about that, and no one ever bothered to actually look at these return values. So remove them all. v2: fixup unregister_framebuffer in savagefb, fbtft, ivtvfb, and neofb drivers, reported by kbuild. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Peter Rosin <peda@axentia.se> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: linux-fbdev@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190528090304.9388-19-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Also remove the error return value. That's all errors for either driver bugs (trying to unbind something that isn't bound), or errors of the new driver that will take over. There's nothing the outgoing driver can do about this anyway, so switch over to void. Signed-off-by:
-
Daniel Vetter authored
Ever since commit c47747fd Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Wed May 11 14:58:34 2011 -0700 fbmem: make read/write/ioctl use the frame buffer at open time fbdev has gained proper refcounting for the fbinfo attached to any open files, which means that the backing driver (stored in fb_info->fbops) cannot untimely disappear anymore. The only thing that can happen is that the entire device just outright disappears and gets unregistered, but file_fb_info does check for that. Except that it's racy - it only checks once at the start of a file_ops, there's no guarantee that the underlying fbdev won't untimely disappear. Aside: A proper way to fix that race is probably to replicate the srcu trickery we've rolled out in drm. But given that this race has existed since forever it's probably not one we need to fix right away. do_unregister_framebuffer also nowhere clears fb_info->fbops, hence the check in lock_fb_info can't possible catch a disappearing fbdev later on. Long story short: Ever since the above commit the fb_info->fbops checks have essentially become dead code. Remove this all. Aside from the file_ops callbacks, and stuff called from there there's only register/unregister code left. If that goes wrong a driver managed to register/unregister a device instance twice or in the wrong order. That's just a driver bug. v2: - fb_mmap had an open-coded version of the fbinfo->fops check, because it doesn't need the fbinfo->lock. Delete that too. - Use the wrapper function in fb_open/release now, since no difference anymore. Signed-off-by:
-
Daniel Vetter authored
It's properly protected by reboot_lock. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Daniel Vetter authored
Simply because olpc never unregisters the damn thing. It also registers the framebuffer directly by poking around in fbdev core internals, so it's all around rather broken. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Daniel Vetter authored
Which means lock_fb_info can never fail. Remove the error handling. Signed-off-by:
-
Daniel Vetter authored
Which means lock_fb_info can never fail. Remove the error handling. Signed-off-by:
-
Daniel Vetter authored
It's dead code, and removing it avoids me having to understand what it's doing with lock_fb_info. v2: Also remove sh_mobile_lcdc_must_reconfigure, now unused (Sam). Signed-off-by:
-
Daniel Vetter authored
With commit 6104c370 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev we have a static dependency between fbcon and fbdev, and we can replace the indirection through the notifier chain with a function call. v2: Sam Ravnborg noticed that mach-pxa/am200epd.c has a notifier too, and listens to this. ... Looking at the code it seems to wait for some fb to show up, so that it can get the framebuffer base address from the fb_info struct. I suspect his is some firmware fbdev. Then it uses that information to let the real fbdev driver (metronomefb.c by the looks) get at the framebuffer memory. This doesn't looke like it's easy to fix (except by deleting the entire thing, seems untouched since 2008, we might be able to get away with that), so let's just stuff a few #ifdef into fb.h and fbmem.c and cry over them for a bit. Signed-off-by:
-
Daniel Vetter authored
This is unused code since commit 6104c370 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev when fbcon was made a compile-time static dependency of fbdev. We can't exit fbcon anymore without exiting fbdev first, which only works if all fbdev drivers have unloaded already. Hence this is all dead code. v2: I missed that fbcon_exit is also called from con_deinit stuff, and there fbcon_has_exited prevents double-cleanup. But we can fix that by properly resetting con2fb_map[] to all -1, which is used everywhere else to indicate "no fb_info allocate to this console". With that change the double-cleanup (which resulted in a module refcount underflow, among other things) is prevented. Aside: con2fb_map is a signed char, so don't register more than 128 fb_info or hilarity will ensue. v3: CI showed me that I still didn't fully understand what's going on here. The leaked references in con2fb_map have been used upon rebinding the fb console in fbcon_init. It worked because fbdev unregistering still cleaned out con2fb_map, and reset it to info_idx. If the last fbdev driver unregistered, then it also reset info_idx, and unregistered the fbcon driver. Imo that's all a bit fragile, so let's keep the con2fb_map reset to -1, and in fbcon_init pick info_idx if we're starting fresh. That means unbinding and rebinding will cleanse the mapping, but why are you doing that if you want to retain the mapping, so should be fine. Also, I think info_idx == -1 is impossible in fbcon_init - we unregister the fbcon in that case. So catch&warn about that. v4: Drop unecessary assignment - I forgot to delete the first assignment of info in fbcon_init. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
-
Daniel Vetter authored
This was formerly used in fbdev drivers (not sure why, predates most git history), but now it's entirely an fbcon internal thing. Give it a more specific name. Signed-off-by:
-
Daniel Vetter authored
Motivated because it contains a struct display, which is a fbcon internal data structure that I want to rename. It seems to have been formerly used in drivers, but that's very long time ago. Signed-off-by:
-
Daniel Vetter authored
Entirely unused. Signed-off-by:
-
Daniel Vetter authored
Motivated because it contains a struct display, which is a fbcon internal data structure that I want to rename. It seems to have been formerly used in drivers, but that's very long time ago. Signed-off-by:
-
Daniel Vetter authored
I honestly have no idea what the subtle differences between con_is_visible, con_is_fg (internal to vt.c) and con_is_bound are. But it looks like both vc->vc_display_fg and con_driver_map are protected by the console_lock, so probably better if we hold that when checking this. To do that I had to deinline the con_is_visible function. Signed-off-by:
-
Daniel Vetter authored
For symmetry reasons with do_unblank_screen, except without the oops_in_progress special case. Just a drive-by annotation while I'm trying to untangle the fbcon vs. fbdev screen blank/unblank maze. Signed-off-by:
-
Daniel Vetter authored
Just drive-by, nothing systematic yet. Signed-off-by:
-
Daniel Vetter authored
As part of trying to understand the locking (or lack thereof) in the fbcon/vt/fbdev maze, annotate everything. Signed-off-by:
-
- 09 Jun, 2019 1 commit
-
-
Linus Torvalds authored
-
- 08 Jun, 2019 12 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A change to call iput() asynchronously to avoid a possible deadlock when iput_final() needs to wait for in-flight I/O (e.g. readahead) and a fixup for a cleanup that went into -rc1" * tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client: ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "Just one fix for the Xen block frontend driver avoiding allocations with order > 0" * tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkfront: switch kcalloc to kvcalloc for large array allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: - fix stack unwinder: the stack unwinder rework has on off-by-one bug which prevents following stack backchains over more than one context (e.g. irq -> process). - fix address space detection in exception handler: if user space switches to access register mode, which is not supported anymore, the exception handler may resolve to the wrong address space. * tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/unwind: correct stack switching during unwind s390/mm: fix address space detection in exception handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: - Declare ginvt() __always_inline due to its use of an argument as an inline asm immediate. - A VDSO build fix following Kbuild changes made this cycle. - A fix for boot failures on txx9 systems following memory initialization changes made this cycle. - Bounds check virt_addr_valid() to prevent it spuriously indicating that bogus addresses are valid, in turn fixing hardened usercopy failures that have been present since v4.12. - Build uImage.gz for pistachio systems by default, since this is the image we need in order to actually boot on a board. - Remove an unused variable in our uprobes code. * tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: uprobes: remove set but not used variable 'epc' MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.2-rc4 to resolve a number of reported issues. The most "notable" one here is the kernel headers in proc^Wsysfs fixes. Those changes move the header file info into sysfs and fixes the build issues that you reported. Other than that, a bunch of small habanalabs driver fixes, some fpga driver fixes, and a few other tiny driver fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Read upper bits of trace buffer from RWPHI habanalabs: Fix virtual address access via debugfs for 2MB pages fpga: zynqmp-fpga: Correctly handle error pointer habanalabs: fix bug in checking huge page optimization habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac4 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has a driver bugfix and a MAINTAINERS fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - jz4780 transfer fix for acking descriptors early - fsl-qdma: clean registers on error - dw-axi-dmac: null pointer dereference fix - mediatek-cqdma: fix sleeping in atomic context - tegra210-adma: fix bunch os issues like crashing in driver probe, channel FIFO configuration etc. - sprd: Fixes for possible crash on descriptor status, block length overflow. For 2-stage transfer fix incorrect start, configuration and interrupt handling. * tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Allow symlink from the bfq.weight cgroup parameter to the general weight (Angelo) - Damien is new skd maintainer (Bart) - NVMe pull request from Sagi, with a few small fixes. - Ensure we set DMA segment size properly, dma-debug is now tripping on these (Christoph) - Remove useless debugfs_create() return check (Greg) - Remove redundant unlikely() check on IS_ERR() (Kefeng) - Fixup request freeing on exit (Ming) * tag 'for-linus-20190608' of git://git.kernel.dk/linux-block: block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file block: free sched's request pool in blk_cleanup_queue nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation mmc: also set max_segment_size in the device mtip32xx: also set max_segment_size in the device rsxx: don't call dma_set_max_seg_size nvme-pci: don't limit DMA segement size block: Drop unlikely before IS_ERR(_OR_NULL) block: aoe: no need to check return value of debugfs_create functions nvmet: fix data_len to 0 for bdev-backed write_zeroes MAINTAINERS: Hand over skd maintainership nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Two bug fixes, both for fairly serious problems; the UFS one looks like it could be used to exfiltrate data from the kernel, although probably only a privileged user has access to the command management interface and the missing unlock in smartpqi is long standing and probably a little used error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous() scsi: ufs: Check that space was properly alloced in copy_query_response
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "This consists of a single fix for a vm test build failure regression when it is built by itself" * tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: vm: Fix test build failure when built by itself
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A small bit more lively this week but not majorly so. I'm away in Japan next week for family holiday, so I'll be pretty disconnected, I've asked Daniel to do fixes for the week while I'm out. The nouveau firmware changes are a bit large, but they address a big problem where a whole set of boards don't load with the driver, and the new firmware fixes that, so I think it's worth trying to land it now. core: - Allow fb changes in async commits (drivers as well) udmabuf: - Unmap scatterlist when unmapping udmabuf nouveau: - firmware loading fixes for secboot firmware on new GPU revision. komeda: - oops, dma mapping and warning fixes arm-hdlcd: - clock fixes - mode validation fix i915: - Add a missing Icelake workaround - GVT - DMA map fault fix and enforcement fixes amdgpu: - DCE resume fix - New raven variation updates" * tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm: (33 commits) drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device drm/komeda: Potential error pointer dereference drm/komeda: remove set but not used variable 'kcrtc' drm/amd/amdgpu: add RLC firmware to support raven1 refresh drm/amd/powerplay: add set_power_profile_mode for raven1_refresh drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2) udmabuf: actually unmap the scatterlist drm/arm/hdlcd: Allow a bit of clock tolerance drm/arm/hdlcd: Actually validate CRTC modes drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times drm/komeda: fixing of DMA mapping sg segment warning drm: don't block fb changes for async plane updates drm/vc4: fix fb references in async update drm/msm: fix fb references in async update drm/amd: fix fb references in async update ...
-
- 07 Jun, 2019 9 commits
-
-
Wolfram Sang authored
A mail just bounced back with "user unknown": 550 5.1.1 <kramasub@codeaurora.org> User doesn't exist I also couldn't find a more recent address in git history. So, remove this stale entry. Signed-off-by:Wolfram Sang <wsa@the-dreams.de>
-
Robert Hancock authored
This driver does not support reading more than 255 bytes at once because the register for storing the number of bytes to read is only 8 bits. Add a max_read_len quirk to enforce this. This was found when using this driver with the SFP driver, which was previously reading all 256 bytes in the SFP EEPROM in one transaction. This caused a bunch of hard-to-debug errors in the xiic driver since the driver/logic was treating the number of bytes to read as zero. Rejecting transactions that aren't supported at least allows the problem to be diagnosed more easily. Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Reviewed-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix a couple of inconsistencies and locking problems in pmbus driver - Register with thermal subsystem only on systems supporting devicetree * tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/core) Treat parameters as paged if on multiple pages hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples hwmon: (core) add thermal sensors only if dev->of_node is present
-
Jan Glauber authored
The lockref cmpxchg loop is unbound as long as the spinlock is not taken. Depending on the hardware implementation of compare-and-swap a high number of loop retries might happen. Add an upper bound to the loop to force the fallback to spinlocks after some time. A retry value of 100 should not impact any hardware that does not have this issue. With the retry limit the performance of an open-close testcase improved between 60-70% on ThunderX2. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jan Glauber <jglauber@marvell.com> Signed-off-by:
-
Andrey Konovalov authored
Architectures that support memory tagging have a need to perform untagging (stripping the tag) in various parts of the kernel. This patch adds an untagged_addr() macro, which is defined as noop for architectures that do not support memory tagging. The oncoming patch series will define it at least for sparc64 and arm64. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtensa fix from Max Filippov: "Fix a section mismatch between memblock_reserve and mem_reserve. This fixes tinyconfig xtensa builds" * tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: Fix section mismatch between memblock_reserve and mem_reserve
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Sagi. * 'nvme-5.2-rc-next' of git://git.infradead.org/nvme: nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation nvmet: fix data_len to 0 for bdev-backed write_zeroes nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild fixes from Masahiro Yamada: - fix kselftest-merge to find config fragments in deeper directories - fix kconfig unit test, which was broken by SPDX tag addition - add + prefix to buildtar to suppress jobserver unavailable warning - fix checkstack.pl to recognize arch=arm64 - suppress noisy warning from cc-cross-prefix * tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use more portable 'command -v' for cc-cross-prefix scripts/checkstack.pl: Fix arm64 wrong or unknown architecture kbuild: tar-pkg: enable communication with jobserver kconfig: tests: fix recursive inclusion unit test kbuild: teach kselftest-merge to find nested config files
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here's a couple of MMC and MEMSTICK fixes: MMC host: - sdhci: Fix SDIO IRQ thread deadlock - sdhci-tegra: Fix a warning message - sdhci_am654: Fix SLOTTYPE write - meson-gx: Fix IRQ ack - tmio: Fix SCC error handling to avoid false positive CRC error MEMSTICK core: - mspro_block: Fix returning a correct error code" * tag 'mmc-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci_am654: Fix SLOTTYPE write mmc: sdhci: Fix SDIO IRQ thread deadlock mmc: meson-gx: fix irq ack mmc: tmio: fix SCC error handling to avoid false positive CRC error mmc: tegra: Fix a warning message memstick: mspro_block: Fix an error code in mspro_block_issue_req()
-
