Pull HID updates from Jiri Kosina:

 - patch series that ensures that hid-multitouch driver disables touch
   and button-press reporting on hid-mt devices during suspend when the
   device is not configured as a wakeup-source, from Hans de Goede

 - support for ISH DMA on Intel EHL platform, from Even Xu

 - support for Renoir and Cezanne SoCs, Ambient Light Sensor and Human
   Presence Detection sensor for amd-sfh driver, from Basavaraj Natikar

 - other assorted code cleanups and device-specific fixes/quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (45 commits)
  HID: thrustmaster: Switch to kmemdup() when allocate change_request
  HID: multitouch: Disable event reporting on suspend when the device is not a wakeup-source
  HID: logitech-dj: Implement may_wakeup ll-driver callback
  HID: usbhid: Implement may_wakeup ll-driver callback
  HID: core: Add hid_hw_may_wakeup() function
  HID: input: Add support for Programmable Buttons
  HID: wacom: Correct base usage for capacitive ExpressKey status bits
  HID: amd_sfh: Add initial support for HPD sensor
  HID: amd_sfh: Extend ALS support for newer AMD platform
  HID: amd_sfh: Extend driver capabilities for multi-generation support
  HID: surface-hid: Fix get-report request
  HID: sony: fix freeze when inserting ghlive ps3/wii dongles
  HID: usbkbd: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  HID: amd_sfh: change in maintainer
  HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
  HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
  HID: intel-ish-hid: Set ISH driver depends on x86
  HID: hid-input: add Surface Go battery quirk
  HID: intel-ish-hid: Fix minor typos in comments
  HID: usbmouse: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  ...

Pull EDAC updates from Tony Luck:
 "Various fixes and support for new CPUs:

   - Clean up error messages from thunderx_edac

   - Add MODULE_DEVICE_TABLE to ti_edac so it will autoload

   - Use %pR to print resources in aspeed_edac

   - Add Yazen Ghannam as MAINTAINER for AMD edac drivers

   - Fix Ice Lake and Sapphire Rapids drivers to report correct "near"
     or "far" device for errors in 2LM configurations

   - Add support of on package high bandwidth memory in Sapphire Rapids

   - New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
     ICL-NNPI, Tiger Lake and Alder Lake)

   - Don't even try to load Intel EDAC drivers when running as a guest

   - Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6"

* tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: fix core dependency
  EDAC/Intel: Do not load EDAC driver when running as a guest
  EDAC/igen6: Add Intel Alder Lake SoC support
  EDAC/igen6: Add Intel Tiger Lake SoC support
  EDAC/igen6: Add Intel ICL-NNPI SoC support
  EDAC/i10nm: Add support for high bandwidth memory
  EDAC/i10nm: Add detection of memory levels for ICX/SPR servers
  EDAC/skx_common: Add new ADXL components for 2-level memory
  MAINTAINERS: Make Yazen Ghannam maintainer for EDAC-AMD64
  EDAC/aspeed: Use proper format string for printing resource
  EDAC/ti: Add missing MODULE_DEVICE_TABLE
  EDAC/thunderx: Remove irrelevant variable from error messages

Merge tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm driver updates from Jarkko Sakkinen:
 "Bug fixes for TPM"

[ This isn't actually the whole contents of the tag and thus doesn't
  contain Jarkko's signature - I dropped the two top commits that added
  support for signing modules using elliptic curve keys because there's
  a new series for that that fixes a few confising things   - Linus ]

* tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
  tpm_tis: Use DEFINE_RES_MEM() to simplify code
  tpm: fix some doc warnings in tpm1-cmd.c
  tpm_tis_spi: add missing SPI device ID entries
  tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATURE
  char: tpm: move to use request_irq by IRQF_NO_AUTOEN flag
  tpm_tis_spi: set default probe function if device id not match
  tpm_crb: Use IOMEM_ERR_PTR when function returns iomem

Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - New think-lmi driver adding support for changing Lenovo Thinkpad
     BIOS settings from within Linux using the standard firmware-
     attributes class sysfs API

   - MS Surface aggregator-cdev now also supports forwarding events to
     user-space (for debugging / new driver development purposes only)

   - New intel_skl_int3472 driver this provides the necessary glue to
     translate ACPI table information to GPIOs, regulators, etc. for
     camera sensors on Intel devices with IPU3 attached MIPI cameras

   - A whole bunch of other fixes + device-specific quirk additions

   - New devm_work_autocancel() devm-helpers.h function"

* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
  platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
  platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
  platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
  platform/x86: think-lmi: Split current_value to reflect only the value
  platform/x86: think-lmi: Fix issues with duplicate attributes
  platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
  platform/x86: intel_cht_int33fe: Move to its own subfolder
  platform/x86: intel_skl_int3472: Move to intel/ subfolder
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
  platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
  platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
  platform/x86: intel_skl_int3472: Free ACPI device resources after use
  platform/x86: Remove "default n" entries
  platform/x86: ISST: Use numa node id for cpu pci dev mapping
  platform/x86: ISST: Optimize CPU to PCI device mapping
  tools/power/x86/intel-speed-select: v1.10 release
  tools/power/x86/intel-speed-select: Fix uncore memory frequency display
  extcon: extcon-max8997: Simplify driver using devm
  extcon: extcon-max8997: Fix IRQ freeing at error path
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for i.MX8ULP

 - mtk: code change around callback struct

 - qcom: add sm6125, MSM8939 fix for channel exhaustion

 - microchip: add support for polarfire controller

 - misc: cosmetic changes to bcm-2835,flexrm,pdc, arm-mhu and hisilicon

* tag 'mailbox-v5.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (26 commits)
  MAINTAINERS: add entry for polarfire soc mailbox
  dt-bindings: add bindings for polarfire soc system controller
  mbox: add polarfire soc system controller mailbox
  dt-bindings: add bindings for polarfire soc mailbox
  mailbox: imx: Avoid using val uninitialized in imx_mu_isr()
  mailbox: qcom: Add MSM8939 APCS support
  mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
  dt-bindings: mailbox: qcom: Add MSM8939 APCS compatible
  mailbox: qcom-apcs: Add SM6125 compatible
  dt-bindings: mailbox: Add binding for sm6125
  mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()
  mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in flexrm_mbox_probe()
  mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()
  mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
  mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_data
  mailbox: mtk-cmdq: Use mailbox rx_callback
  mailbox: mtk-cmdq: Remove cmdq_cb_status
  mailbox: imx-mailbox: support i.MX8ULP MU
  mailbox: imx: add xSR/xCR register array
  mailbox: imx: replace the xTR/xRR array with single register
  ...

Pull IPMI driver updates from Corey Minyard:
 "Mostly a restructure of the kcs_bmc driver to make it easier to use
  with different types of devices, and just to clean things up and
  improve things.

  Also some bug fixes for the kcs_bmc driver.

  One fix to the IPMI watchdog to stop the timer when the action is
  none. Not a big deal, but it's the right thing to do"

* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
  ipmi: kcs_bmc_aspeed: Optionally apply status address
  ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
  ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
  dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
  dt-bindings: ipmi: Convert ASPEED KCS binding to schema
  ipmi: kcs_bmc: Add serio adaptor
  ipmi: kcs_bmc: Enable IBF on open
  ipmi: kcs_bmc: Allow clients to control KCS IRQ state
  ipmi: kcs_bmc: Decouple the IPMI chardev from the core
  ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
  ipmi: kcs_bmc: Split headers into device and client
  ipmi: kcs_bmc: Turn the driver data-structures inside-out
  ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
  ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
  ipmi: kcs_bmc: Make status update atomic
  ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
  ipmi/watchdog: Stop watchdog timer when the current action is 'none'

- patch series that ensures that hid-multitouch driver disables touch and
  button-press reporting on hid-mt devices during suspend when the device is
  not configured as a wakeup-source, from Hans de Goede

- support for LCD menu keys + LCD brightness control on the Logitech Z-10
  speakers (with LCD) which use the same protocol as the G15 keyboards
  from Hans de Goede

- support for ISH DMA on EHL platform from Even Xu
- various code style fixes and cleanups from Lee Jones and Uwe Kleine-König

- device tree match for Google Whiskers device from Ikjoon Jang

- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
  from Thomas Weißschuh
- various other small fixes and code style improvements

- support for Renoir and Cezanne SoCs
- support for Ambient Light Sensor
- support for Human Presence Detection sensor

all from Basavaraj Natikar

Pull dlm updates from David Teigland:
 "This is a major dlm networking enhancement that adds message
  retransmission so that the dlm can reliably continue operating when
  network connections fail and nodes reconnect.

  Previously, this would result in lost messages which could only be
  handled as a node failure"

* tag 'dlm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (26 commits)
  fs: dlm: invalid buffer access in lookup error
  fs: dlm: fix race in mhandle deletion
  fs: dlm: rename socket and app buffer defines
  fs: dlm: introduce proto values
  fs: dlm: move dlm allow conn
  fs: dlm: use alloc_ordered_workqueue
  fs: dlm: fix memory leak when fenced
  fs: dlm: fix lowcomms_start error case
  fs: dlm: Fix spelling mistake "stucked" -> "stuck"
  fs: dlm: Fix memory leak of object mh
  fs: dlm: don't allow half transmitted messages
  fs: dlm: add midcomms debugfs functionality
  fs: dlm: add reliable connection if reconnect
  fs: dlm: add union in dlm header for lockspace id
  fs: dlm: move out some hash functionality
  fs: dlm: add functionality to re-transmit a message
  fs: dlm: make buffer handling per msg
  fs: dlm: add more midcomms hooks
  fs: dlm: public header in out utility
  fs: dlm: fix connection tcp EOF handling
  ...

Pull gfs2 updates from Andreas Gruenbacher:
 "Various minor gfs2 cleanups and fixes"

* tag 'gfs2-v5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Clean up gfs2_unstuff_dinode
  gfs2: Unstuff before locking page in gfs2_page_mkwrite
  gfs2: Clean up the error handling in gfs2_page_mkwrite
  gfs2: Fix error handling in init_statfs
  gfs2: Fix underflow in gfs2_page_mkwrite
  gfs2: Use list_move_tail instead of list_del/list_add_tail
  gfs2: Fix do_gfs2_set_flags description

Pull cifs updates from Steve French:

 - improve fallocate emulation

 - DFS fixes

 - minor multichannel fixes

 - various cleanup patches, many to address Coverity warnings

* tag '5.14-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (38 commits)
  smb3: prevent races updating CurrentMid
  cifs: fix missing spinlock around update to ses->status
  cifs: missing null pointer check in cifs_mount
  smb3: fix possible access to uninitialized pointer to DACL
  cifs: missing null check for newinode pointer
  cifs: remove two cases where rc is set unnecessarily in sid_to_id
  SMB3: Add new info level for query directory
  cifs: fix NULL dereference in smb2_check_message()
  smbdirect: missing rc checks while waiting for rdma events
  cifs: Avoid field over-reading memcpy()
  smb311: remove dead code for non compounded posix query info
  cifs: fix SMB1 error path in cifs_get_file_info_unix
  smb3: fix uninitialized value for port in witness protocol move
  cifs: fix unneeded null check
  cifs: use SPDX-Licence-Identifier
  cifs: convert list_for_each to entry variant in cifs_debug.c
  cifs: convert list_for_each to entry variant in smb2misc.c
  cifs: avoid extra calls in posix_info_parse
  cifs: retry lookup and readdir when EAGAIN is returned.
  cifs: fix check of dfs interlinks
  ...

Merge tag 'fs.openat2.unknown_flags.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull openat2 fixes from Christian Brauner:

 - Remove the unused VALID_UPGRADE_FLAGS define we carried from an
   extension to openat2() that we haven't merged. Aleksa might be
   getting back to it at some point but just not right now.

 - openat2() used to accidently ignore unknown flag values in the upper
   32 bits.

   The new openat2() syscall verifies that no unknown O-flag values are
   set and returns an error to userspace if they are while the older
   open syscalls like open() and openat() simply ignore unknown flag
   values:

      #define O_FLAG_CURRENTLY_INVALID (1 << 31)
      struct open_how how = {
            .flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID,
            .resolve = 0,
      };

      /* fails */
      fd = openat2(-EBADF, "/dev/null", &how, sizeof(how));

      /* succeeds */
      fd = openat(-EBADF, "/dev/null", O_RDONLY | O_FLAG_CURRENTLY_INVALID);

   However, openat2() silently truncates the upper 32 bits meaning:

      #define O_FLAG_CURRENTLY_INVALID_LOWER32 (1 << 31)
      #define O_FLAG_CURRENTLY_INVALID_UPPER32 (1 << 40)

      struct open_how how_lowe32 = {
            .flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID_LOWER32,
      };

      struct open_how how_upper32 = {
            .flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID_UPPER32,
      };

      /* fails */
      fd = openat2(-EBADF, "/dev/null", &how_lower32, sizeof(how_lower32));

      /* succeeds */
      fd = openat2(-EBADF, "/dev/null", &how_upper32, sizeof(how_upper32));

   Fix this by preventing the immediate truncation in build_open_flags()
   and add a compile-time check to catch when we add flags in the upper
   32 bit range.

* tag 'fs.openat2.unknown_flags.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  test: add openat2() test for invalid upper 32 bit flag value
  open: don't silently ignore unknown O-flags in openat2()
  fcntl: remove unused VALID_UPGRADE_FLAGS

Merge tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull mount_setattr updates from Christian Brauner:
 "A few releases ago the old mount API gained support for a mount
  options which prevents following symlinks on a given mount. This adds
  support for it in the new mount api through the MOUNT_ATTR_NOSYMFOLLOW
  flag via mount_setattr() and fsmount(). With mount_setattr() that flag
  can even be applied recursively.

  There's an additional ack from Ross Zwisler who originally authored
  the nosymfollow patch. As I've already had the patches in my for-next
  I didn't add his ack explicitly"

* tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: test MOUNT_ATTR_NOSYMFOLLOW with mount_setattr()
  mount: Support "nosymfollow" in new mount api

Merge misc updates from Andrew Morton:
 "191 patches.

  Subsystems affected by this patch series: kthread, ia64, scripts,
  ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
  slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
  mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
  pagealloc, and memory-failure)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
  mm,hwpoison: make get_hwpoison_page() call get_any_page()
  mm,hwpoison: send SIGBUS with error virutal address
  mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
  mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
  mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
  mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
  docs: remove description of DISCONTIGMEM
  arch, mm: remove stale mentions of DISCONIGMEM
  mm: remove CONFIG_DISCONTIGMEM
  m68k: remove support for DISCONTIGMEM
  arc: remove support for DISCONTIGMEM
  arc: update comment about HIGHMEM implementation
  alpha: remove DISCONTIGMEM and NUMA
  mm/page_alloc: move free_the_page
  mm/page_alloc: fix counting of managed_pages
  mm/page_alloc: improve memmap_pages dbg msg
  mm: drop SECTION_SHIFT in code comments
  mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
  mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
  mm/page_alloc: scale the number of pages that are batch freed
  ...

Pull device properties framework updates from Rafael Wysocki:
 "These unify device properties access in some pieces of code and make
  related changes.

  Specifics:

   - Handle device properties with software node API in the ACPI IORT
     table parsing code (Heikki Krogerus).

   - Unify of_node access in the common device properties code, constify
     the acpi_dma_supported() argument pointer and fix up CONFIG_ACPI=n
     stubs of some functions related to device properties (Andy
     Shevchenko)"

* tag 'devprop-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Unify access to of_node
  ACPI: scan: Constify acpi_dma_supported() helper function
  ACPI: property: Constify stubs for CONFIG_ACPI=n case
  ACPI: IORT: Handle device properties with software node API
  device property: Retrieve fwnode from of_node via accessor

Pull PNP updates from Rafael Wysocki:
 "These get rid of unnecessary local variables and function, reduce code
  duplication and clean up message printing.

  Specifics:

   - Remove unnecessary local variables from isapnp_proc_attach_device()
     (Anupama K Patil).

   - Make the callers of pnp_alloc() use kzalloc() directly and drop the
     former (Heiner Kallweit).

   - Make two pieces of code use dev_dbg() instead of dev_printk() with
     the KERN_DEBUG message level (Heiner Kallweit).

   - Use DEVICE_ATTR_RO() instead of full DEVICE_ATTR() in some places
     in card.c (Zhen Lei).

   - Use list_for_each_entry() instead of list_for_each() in
     insert_device() (Zou Wei)"

* tag 'pnp-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: pnpbios: Use list_for_each_entry() instead of list_for_each()
  PNP: use DEVICE_ATTR_RO macro
  PNP: Switch over to dev_dbg()
  PNP: Remove pnp_alloc()
  drivers: pnp: isapnp: proc.c: Remove unnecessary local variables

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the 20210604 upstream
  revision, add preliminary support for the Platform Runtime Mechanism
  (PRM), address issues related to the handling of device dependencies
  in the ACPI device eunmeration code, improve the tracking of ACPI
  power resource states, improve the ACPI support for suspend-to-idle on
  AMD systems, continue the unification of message printing in the ACPI
  code, address assorted issues and clean up the code in a number of
  places.

  Specifics:

   - Update ACPICA code in the kernel to upstrea revision 20210604
     including the following changes:

      - Add defines for the CXL Host Bridge Structureand and add the
        CFMWS structure definition to CEDT (Alison Schofield).
      - iASL: Finish support for the IVRS ACPI table (Bob Moore).
      - iASL: Add support for the SVKL table (Bob Moore).
      - iASL: Add full support for RGRT ACPI table (Bob Moore).
      - iASL: Add support for the BDAT ACPI table (Bob Moore).
      - iASL: add disassembler support for PRMT (Erik Kaneda).
      - Fix memory leak caused by _CID repair function (Erik Kaneda).
      - Add support for PlatformRtMechanism OpRegion (Erik Kaneda).
      - Add PRMT module header to facilitate parsing (Erik Kaneda).
      - Add _PLD panel positions (Fabian Wüthrich).
      - MADT: add Multiprocessor Wakeup Mailbox Structure and the SVKL
        table headers (Kuppuswamy Sathyanarayanan).
      - Use ACPI_FALLTHROUGH (Wei Ming Chen).

   - Add preliminary support for the Platform Runtime Mechanism (PRM) to
     allow the AML interpreter to call PRM functions (Erik Kaneda).

   - Address some issues related to the handling of device dependencies
     reported by _DEP in the ACPI device enumeration code and clean up
     some related pieces of it (Rafael Wysocki).

   - Improve the tracking of states of ACPI power resources (Rafael
     Wysocki).

   - Improve ACPI support for suspend-to-idle on AMD systems (Alex
     Deucher, Mario Limonciello, Pratik Vishwakarma).

   - Continue the unification and cleanup of message printing in the
     ACPI code (Hanjun Guo, Heiner Kallweit).

   - Fix possible buffer overrun issue with the description_show() sysfs
     attribute method (Krzysztof Wilczyński).

   - Improve the acpi_mask_gpe kernel command line parameter handling
     and clean up the core ACPI code related to sysfs (Andy Shevchenko,
     Baokun Li, Clayton Casciato).

   - Postpone bringing devices in the general ACPI PM domain to D0
     during resume from system-wide suspend until they are really needed
     (Dmitry Torokhov).

   - Make the ACPI processor driver fix up C-state latency if not
     ordered (Mario Limonciello).

   - Add support for identifying devices depening on the given one that
     are not its direct descendants with the help of _DEP (Daniel
     Scally).

   - Extend the checks related to ACPI IRQ overrides on x86 in order to
     avoid false-positives (Hui Wang).

   - Add battery DPTF participant for Intel SoCs (Sumeet Pawnikar).

   - Rearrange the ACPI fan driver and device power management code to
     use a common list of device IDs (Rafael Wysocki).

   - Fix clang CFI violation in the ACPI BGRT table parsing code and
     clean it up (Nathan Chancellor).

   - Add GPE-related quirks for some laptops to the EC driver (Chris
     Chiu, Zhang Rui).

   - Make the ACPI PPTT table parsing code populate the cache-id value
     if present in the firmware (James Morse).

   - Remove redundant clearing of context->ret.pointer from
     acpi_run_osc() (Hans de Goede).

   - Add missing acpi_put_table() in acpi_init_fpdt() (Jing Xiangfeng).

   - Make ACPI APEI handle ARM Processor Error CPER records like Memory
     Error ones to avoid user space task lockups (Xiaofei Tan).

   - Stop warning about disabled ACPI in APEI (Jon Hunter).

   - Fix fall-through warning for Clang in the SBSHC driver (Gustavo A.
     R. Silva).

   - Add custom DSDT file as Makefile prerequisite (Richard Fitzgerald).

   - Initialize local variable to avoid garbage being returned (Colin
     Ian King).

   - Simplify assorted pieces of code, address assorted coding style and
     documentation issues and comment typos (Baokun Li, Christophe
     JAILLET, Clayton Casciato, Liu Shixin, Shaokun Zhang, Wei Yongjun,
     Yang Li, Zhen Lei)"

* tag 'acpi-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (97 commits)
  ACPI: PM: postpone bringing devices to D0 unless we need them
  ACPI: tables: Add custom DSDT file as makefile prerequisite
  ACPI: bgrt: Use sysfs_emit
  ACPI: bgrt: Fix CFI violation
  ACPI: EC: trust DSDT GPE for certain HP laptop
  ACPI: scan: Simplify acpi_table_events_fn()
  ACPI: PM: Adjust behavior for field problems on AMD systems
  ACPI: PM: s2idle: Add support for new Microsoft UUID
  ACPI: PM: s2idle: Add support for multiple func mask
  ACPI: PM: s2idle: Refactor common code
  ACPI: PM: s2idle: Use correct revision id
  ACPI: sysfs: Remove tailing return statement in void function
  ACPI: sysfs: Use __ATTR_RO() and __ATTR_RW() macros
  ACPI: sysfs: Sort headers alphabetically
  ACPI: sysfs: Refactor param_get_trace_state() to drop dead code
  ACPI: sysfs: Unify pattern of memory allocations
  ACPI: sysfs: Allow bitmap list to be supplied to acpi_mask_gpe
  ACPI: sysfs: Make sparse happy about address space in use
  ACPI: scan: Fix race related to dropping dependencies
  ACPI: scan: Reorganize acpi_device_add()
  ...

Pull power management updates from Rafael Wysocki:
 "These add hybrid processors support to the intel_pstate driver and
  make it work with more processor models when HWP is disabled, make the
  intel_idle driver use special C6 idle state paremeters when package
  C-states are disabled, add cooling support to the tegra30 devfreq
  driver, rework the TEO (timer events oriented) cpuidle governor,
  extend the OPP (operating performance points) framework to use the
  required-opps DT property in more cases, fix some issues and clean up
  a number of assorted pieces of code.

  Specifics:

   - Make intel_pstate support hybrid processors using abstract
     performance units in the HWP interface (Rafael Wysocki).

   - Add Icelake servers and Cometlake support in no-HWP mode to
     intel_pstate (Giovanni Gherdovich).

   - Make cpufreq_online() error path be consistent with the CPU device
     removal path in cpufreq (Rafael Wysocki).

   - Clean up 3 cpufreq drivers and the statistics code (Hailong Liu,
     Randy Dunlap, Shaokun Zhang).

   - Make intel_idle use special idle state parameters for C6 when
     package C-states are disabled (Chen Yu).

   - Rework the TEO (timer events oriented) cpuidle governor to address
     some theoretical shortcomings in it (Rafael Wysocki).

   - Drop unneeded semicolon from the TEO governor (Wan Jiabing).

   - Modify the runtime PM framework to accept unassigned suspend and
     resume callback pointers (Ulf Hansson).

   - Improve pm_runtime_get_sync() documentation (Krzysztof Kozlowski).

   - Improve device performance states support in the generic power
     domains (genpd) framework (Ulf Hansson).

   - Fix some documentation issues in genpd (Yang Yingliang).

   - Make the operating performance points (OPP) framework use the
     required-opps DT property in use cases that are not related to
     genpd (Hsin-Yi Wang).

   - Make lazy_link_required_opp_table() use list_del_init instead of
     list_del/INIT_LIST_HEAD (Yang Yingliang).

   - Simplify wake IRQs handling in the core system-wide sleep support
     code and clean up some coding style inconsistencies in it (Tian
     Tao, Zhen Lei).

   - Add cooling support to the tegra30 devfreq driver and improve its
     DT bindings (Dmitry Osipenko).

   - Fix some assorted issues in the devfreq core and drivers (Chanwoo
     Choi, Dong Aisheng, YueHaibing)"

* tag 'pm-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  PM / devfreq: passive: Fix get_target_freq when not using required-opp
  cpufreq: Make cpufreq_online() call driver->offline() on errors
  opp: Allow required-opps to be used for non genpd use cases
  cpuidle: teo: remove unneeded semicolon in teo_select()
  dt-bindings: devfreq: tegra30-actmon: Add cooling-cells
  dt-bindings: devfreq: tegra30-actmon: Convert to schema
  PM / devfreq: userspace: Use DEVICE_ATTR_RW macro
  PM: runtime: Clarify documentation when callbacks are unassigned
  PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks
  PM: runtime: Improve path in rpm_idle() when no callback
  PM: hibernate: remove leading spaces before tabs
  PM: sleep: remove trailing spaces and tabs
  PM: domains: Drop/restore performance state votes for devices at runtime PM
  PM: domains: Return early if perf state is already set for the device
  PM: domains: Split code in dev_pm_genpd_set_performance_state()
  cpuidle: teo: Use kerneldoc documentation in admin-guide
  cpuidle: teo: Rework most recent idle duration values treatment
  cpuidle: teo: Change the main idle state selection logic
  cpuidle: teo: Cosmetic modification of teo_select()
  cpuidle: teo: Cosmetic modifications of teo_update()
  ...

Pull x86 entry code related updates from Thomas Gleixner:

 - Consolidate the macros for .byte ... opcode sequences

 - Deduplicate register offset defines in include files

 - Simplify the ia32,x32 compat handling of the related syscall tables
   to get rid of #ifdeffery.

 - Clear all EFLAGS which are not required for syscall handling

 - Consolidate the syscall tables and switch the generation over to the
   generic shell script and remove the CFLAGS tweaks which are not
   longer required.

 - Use 'int' type for system call numbers to match the generic code.

 - Add more selftests for syscalls

* tag 'x86-entry-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/syscalls: Don't adjust CFLAGS for syscall tables
  x86/syscalls: Remove -Wno-override-init for syscall tables
  x86/uml/syscalls: Remove array index from syscall initializers
  x86/syscalls: Clear 'offset' and 'prefix' in case they are set in env
  x86/entry: Use int everywhere for system call numbers
  x86/entry: Treat out of range and gap system calls the same
  x86/entry/64: Sign-extend system calls on entry to int
  selftests/x86/syscall: Add tests under ptrace to syscall_numbering_64
  selftests/x86/syscall: Simplify message reporting in syscall_numbering
  selftests/x86/syscall: Update and extend syscall_numbering_64
  x86/syscalls: Switch to generic syscallhdr.sh
  x86/syscalls: Use __NR_syscalls instead of __NR_syscall_max
  x86/unistd: Define X32_NR_syscalls only for 64-bit kernel
  x86/syscalls: Stop filling syscall arrays with *_sys_ni_syscall
  x86/syscalls: Switch to generic syscalltbl.sh
  x86/entry/x32: Rename __x32_compat_sys_* to __x64_compat_sys_*

Pull x86 interrupt related updates from Thomas Gleixner:

 - Consolidate the VECTOR defines and the usage sites.

 - Cleanup GDT/IDT related code and replace open coded ASM with proper
   native helper functions.

* tag 'x86-irq-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kexec: Set_[gi]dt() -> native_[gi]dt_invalidate() in machine_kexec_*.c
  x86: Add native_[ig]dt_invalidate()
  x86/idt: Remove address argument from idt_invalidate()
  x86/irq: Add and use NR_EXTERNAL_VECTORS and NR_SYSTEM_VECTORS
  x86/irq: Remove unused vectors defines

Pull timer updates from Thomas Gleixner:
 "Time and clocksource/clockevent related updates:

  Core changes:

   - Infrastructure to support per CPU "broadcast" devices for per CPU
     clockevent devices which stop in deep idle states. This allows us
     to utilize the more efficient architected timer on certain ARM SoCs
     for normal operation instead of permanentely using the slow to
     access SoC specific clockevent device.

   - Print the name of the broadcast/wakeup device in /proc/timer_list

   - Make the clocksource watchdog more robust against delays between
     reading the current active clocksource and the watchdog
     clocksource. Such delays can be caused by NMIs, SMIs and vCPU
     preemption.

     Handle this by reading the watchdog clocksource twice, i.e. before
     and after reading the current active clocksource. In case that the
     two watchdog reads shows an excessive time delta, the read sequence
     is repeated up to 3 times.

   - Improve the debug output and add a test module for the watchdog
     mechanism.

   - Reimplementation of the venerable time64_to_tm() function with a
     faster and significantly smaller version. Straight from the source,
     i.e. the author of the related research paper contributed this!

  Driver changes:

   - No new drivers, not even new device tree bindings!

   - Fixes, improvements and cleanups and all over the place"

* tag 'timers-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  time/kunit: Add missing MODULE_LICENSE()
  time: Improve performance of time64_to_tm()
  clockevents: Use list_move() instead of list_del()/list_add()
  clocksource: Print deviation in nanoseconds when a clocksource becomes unstable
  clocksource: Provide kernel module to test clocksource watchdog
  clocksource: Reduce clocksource-skew threshold
  clocksource: Limit number of CPUs checked for clock synchronization
  clocksource: Check per-CPU clock synchronization when marked unstable
  clocksource: Retry clock read if long delays detected
  clockevents: Add missing parameter documentation
  clocksource/drivers/timer-ti-dm: Drop unnecessary restore
  clocksource/arm_arch_timer: Improve Allwinner A64 timer workaround
  clocksource/drivers/arm_global_timer: Remove duplicated argument in arm_global_timer
  clocksource/drivers/arm_global_timer: Make symbol 'gt_clk_rate_change_nb' static
  arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymore
  clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes
  clocksource/drivers/ingenic: Rename unreasonable array names
  clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
  clocksource/drivers/mediatek: Ack and disable interrupts on suspend
  clocksource/drivers/samsung_pwm: Constify source IO memory
  ...

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core changes:

   - Cleanup and simplification of common code to invoke the low level
     interrupt flow handlers when this invocation requires irqdomain
     resolution. Add the necessary core infrastructure.

   - Provide a proper interface for modular PMU drivers to set the
     interrupt affinity.

   - Add a request flag which allows to exclude interrupts from spurious
     interrupt detection. Useful especially for IPI handlers which
     always return IRQ_HANDLED which turns the spurious interrupt
     detection into a pointless waste of CPU cycles.

  Driver changes:

   - Bulk convert interrupt chip drivers to the new irqdomain low level
     flow handler invocation mechanism.

   - Add device tree bindings for the Renesas R-Car M3-W+ SoC

   - Enable modular build of the Qualcomm PDC driver

   - The usual small fixes and improvements"

* tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties
  irqchip: gic-pm: Remove redundant error log of clock bulk
  irqchip/sun4i: Remove unnecessary oom message
  irqchip/irq-imx-gpcv2: Remove unnecessary oom message
  irqchip/imgpdc: Remove unnecessary oom message
  irqchip/gic-v3-its: Remove unnecessary oom message
  irqchip/gic-v2m: Remove unnecessary oom message
  irqchip/exynos-combiner: Remove unnecessary oom message
  irqchip: Bulk conversion to generic_handle_domain_irq()
  genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()
  genirq: Add generic_handle_domain_irq() helper
  irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()
  irqdesc: Fix __handle_domain_irq() comment
  genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co
  irqdomain: Introduce irq_resolve_mapping()
  irqdomain: Protect the linear revmap with RCU
  irqdomain: Cache irq_data instead of a virq number in the revmap
  irqdomain: Use struct_size() helper when allocating irqdomain
  irqdomain: Make normal and nomap irqdomains exclusive
  powerpc: Move the use of irq_domain_add_nomap() behind a config option
  ...

Pull CPU hotplug fix from Thomas Gleixner:
 "A fix for the CPU hotplug and cpusets interaction:

  cpusets delegate the hotplug work to a workqueue to prevent a lock
  order inversion vs. the CPU hotplug lock. The work is not flushed
  before the hotplug operation returns which creates user visible
  inconsistent state. Prevent this by flushing the work after dropping
  CPU hotplug lock and before releasing the outer mutex which serializes
  the CPU hotplug related sysfs interface operations"

* tag 'smp-urgent-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Cure the cpusets trainwreck

Pull CPU hotplug cleanup from Thomas Gleixner:
 "A simple cleanup for the CPU hotplug code to avoid per_cpu_ptr()
  reevaluation"

* tag 'smp-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Simplify access to percpu cpuhp_state

Pull printk updates from Petr Mladek:

 - Add %pt[RT]s modifier to vsprintf(). It overrides ISO 8601 separator
   by using ' ' (space). It produces "YYYY-mm-dd HH:MM:SS" instead of
   "YYYY-mm-ddTHH:MM:SS".

 - Correctly parse long row of numbers by sscanf() when using the field
   width. Add extensive sscanf() selftest.

 - Generalize re-entrant CPU lock that has already been used to
   serialize dump_stack() output. It is part of the ongoing printk
   rework. It will allow to remove the obsoleted printk_safe buffers and
   introduce atomic consoles.

 - Some code clean up and sparse warning fixes.

* tag 'printk-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: fix cpu lock ordering
  lib/dump_stack: move cpu lock to printk.c
  printk: Remove trailing semicolon in macros
  random32: Fix implicit truncation warning in prandom_seed_state()
  lib: test_scanf: Remove pointless use of type_min() with unsigned types
  selftests: lib: Add wrapper script for test_scanf
  lib: test_scanf: Add tests for sscanf number conversion
  lib: vsprintf: Fix handling of number field widths in vsscanf
  lib: vsprintf: scanf: Negative number must have field width > 1
  usb: host: xhci-tegra: Switch to use %ptTs
  nilfs2: Switch to use %ptTs
  kdb: Switch to use %ptTs
  lib/vsprintf: Allow to override ISO 8601 date and time separator

Merge tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv updates from Wei Liu:
 "Just a few minor enhancement patches and bug fixes"

* tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv()
  Drivers: hv: Move Hyper-V extended capability check to arch neutral code
  drivers: hv: Fix missing error code in vmbus_connect()
  x86/hyperv: fix logical processor creation
  hv_utils: Fix passing zero to 'PTR_ERR' warning
  scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs
  Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer
  hv_balloon: Remove redundant assignment to region_start

__get_hwpoison_page() could fail to grab refcount by some race condition,
so it's helpful if we can handle it by retrying.  We already have retry
logic, so make get_hwpoison_page() call get_any_page() when called from
memory_failure().

As a result, get_hwpoison_page() can return negative values (i.e.  error
code), so some callers are also changed to handle error cases.
soft_offline_page() does nothing for -EBUSY because that's enough and
users in userspace can easily handle it.  unpoison_memory() is also
unchanged because it's broken and need thorough fixes (will be done
later).

Link: https://lkml.kernel.org/r/20210603233632.2964832-3-nao.horiguchi@gmail.comSigned-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now an action required MCE in already hwpoisoned address surely sends a
SIGBUS to current process, but the SIGBUS doesn't convey error virtual
address.  That's not optimal for hwpoison-aware applications.

To fix the issue, make memory_failure() call kill_accessing_process(),
that does pagetable walk to find the error virtual address.  It could find
multiple virtual addresses for the same error page, and it seems hard to
tell which virtual address is correct one.  But that's rare and sending
incorrect virtual address could be better than no address.  So let's
report the first found virtual address for now.

[naoya.horiguchi@nec.com: fix walk_page_range() return]
  Link: https://lkml.kernel.org/r/20210603051055.GA244241@hori.linux.bs1.fc.nec.co.jp

Link: https://lkml.kernel.org/r/20210521030156.2612074-4-nao.horiguchi@gmail.comSigned-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Aili Yao <yaoaili@kingsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jue Wang <juew@google.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Dave Hansen reported the following about Feng Tang's tests on a machine
with persistent memory onlined as a DRAM-like device.

  Feng Tang tossed these on a "Cascade Lake" system with 96 threads and
  ~512G of persistent memory and 128G of DRAM.  The PMEM is in "volatile
  use" mode and being managed via the buddy just like the normal RAM.

  The PMEM zones are big ones:

        present  65011712 = 248 G
        high       134595 = 525 M

  The PMEM nodes, of course, don't have any CPUs in them.

  With your series, the pcp->high value per-cpu is 69584 pages or about
  270MB per CPU.  Scaled up by the 96 CPU threads, that's ~26GB of
  worst-case memory in the pcps per zone, or roughly 10% of the size of
  the zone.

This should not cause a problem as such although it could trigger reclaim
due to pages being stored on per-cpu lists for CPUs remote to a node.  It
is not possible to treat cpuless nodes exactly the same as normal nodes
but the worst-case scenario can be mitigated by splitting pcp->high across
all online CPUs for cpuless memory nodes.

Link: https://lkml.kernel.org/r/20210616110743.GK30378@techsingularity.netSuggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Tang, Feng" <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The per-cpu page allocator (PCP) only stores order-0 pages.  This means
that all THP and "cheap" high-order allocations including SLUB contends on
the zone->lock.  This patch extends the PCP allocator to store THP and
"cheap" high-order pages.  Note that struct per_cpu_pages increases in
size to 256 bytes (4 cache lines) on x86-64.

Note that this is not necessarily a universal performance win because of
how it is implemented.  High-order pages can cause pcp->high to be
exceeded prematurely for lower-orders so for example, a large number of
THP pages being freed could release order-0 pages from the PCP lists.
Hence, much depends on the allocation/free pattern as observed by a single
CPU to determine if caching helps or hurts a particular workload.

That said, basic performance testing passed.  The following is a netperf
UDP_STREAM test which hits the relevant patches as some of the network
allocations are high-order.

netperf-udp
                                 5.13.0-rc2             5.13.0-rc2
                           mm-pcpburst-v3r4   mm-pcphighorder-v1r7
Hmean     send-64         261.46 (   0.00%)      266.30 *   1.85%*
Hmean     send-128        516.35 (   0.00%)      536.78 *   3.96%*
Hmean     send-256       1014.13 (   0.00%)     1034.63 *   2.02%*
Hmean     send-1024      3907.65 (   0.00%)     4046.11 *   3.54%*
Hmean     send-2048      7492.93 (   0.00%)     7754.85 *   3.50%*
Hmean     send-3312     11410.04 (   0.00%)    11772.32 *   3.18%*
Hmean     send-4096     13521.95 (   0.00%)    13912.34 *   2.89%*
Hmean     send-8192     21660.50 (   0.00%)    22730.72 *   4.94%*
Hmean     send-16384    31902.32 (   0.00%)    32637.50 *   2.30%*

Functionally, a patch like this is necessary to make bulk allocation of
high-order pages work with similar performance to order-0 bulk
allocations.  The bulk allocator is not updated in this series as it would
have to be determined by bulk allocation users how they want to track the
order of pages allocated with the bulk allocator.

Link: https://lkml.kernel.org/r/20210611135753.GC30378@techsingularity.netSigned-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After removal of the DISCONTIGMEM memory model the FLAT_NODE_MEM_MAP
configuration option is equivalent to FLATMEM.

Drop CONFIG_FLAT_NODE_MEM_MAP and use CONFIG_FLATMEM instead.

Link: https://lkml.kernel.org/r/20210608091316.3622-10-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA
configuration options are equivalent.

Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead.

Done with

	$ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \
		$(git grep -wl CONFIG_NEED_MULTIPLE_NODES)
	$ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \
		$(git grep -wl NEED_MULTIPLE_NODES)

with manual tweaks afterwards.

[rppt@linux.ibm.com: fix arm boot crash]
  Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com

Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove description of DISCONTIGMEM from the "Memory Models" document and
update VM sysctl description so that it won't mention DISCONIGMEM.

Link: https://lkml.kernel.org/r/20210608091316.3622-8-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several places that mention DISCONIGMEM in comments or have
stale code guarded by CONFIG_DISCONTIGMEM.

Remove the dead code and update the comments.

Link: https://lkml.kernel.org/r/20210608091316.3622-7-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are no architectures that support DISCONTIGMEM left.

Remove the configuration option and the dead code it was guarding in the
generic memory management code.

Link: https://lkml.kernel.org/r/20210608091316.3622-6-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DISCONTIGMEM was replaced by FLATMEM with freeing of the unused memory map
in v5.11.

Remove the support for DISCONTIGMEM entirely.

Link: https://lkml.kernel.org/r/20210608091316.3622-5-rppt@kernel.orgSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>