- 07 Nov, 2019 1 commit
-
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.4 These are a collection of fixes since v5.4-rc4 that have accumilated, they're all driver specific and there's nothing major in here so it's probably not essential to actually send them but I'll leave that call to you.
-
- 06 Nov, 2019 2 commits
-
-
Takashi Iwai authored
The clean up commit 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") unified the error handling code paths with the standard goto, but it introduced a subtle bug: the timer instance is stored in snd_timer_open() incorrectly even if it returns an error. This may eventually lead to UAF, as spotted by fuzzer. The culprit is the snd_timer_open() code checks the SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri. This variable is supposed to be the newly created instance, but we (ab-)used it for a temporary check before the actual creation of a timer instance. After that point, there is another check for the max number of instances, and it bails out if over the threshold. Before the refactoring above, it worked fine because the code returned directly from that point. After the refactoring, however, it jumps to the unified error path that stores the timeri variable in return -- even if it returns an error. Unfortunately this stored value is kept in the caller side (snd_timer_user_tselect()) in tu->timeri. This causes inconsistency later, as if the timer was successfully assigned. In this patch, we fix it by not re-using timeri variable but a temporary variable for testing the exclusive connection, so timeri remains NULL at that point. Fixes: 41672c0c ("ALSA: timer: Simplify error path in snd_timer_open()") Reported-and-tested-by: Tristan Madani <tristmd@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Dragos Tarcatu authored
When using the example SOF amp widget topology, KASAN dumps this when the AMP bytes kcontrol gets loaded: [ 9.579548] BUG: KASAN: slab-out-of-bounds in sof_control_load+0x8cc/0xac0 [snd_sof] [ 9.588194] Write of size 40 at addr ffff8882314559dc by task systemd-udevd/2411 Fix that by rejecting the topology if the bytes data size > max_size Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Nov, 2019 4 commits
-
-
Kai Vehmanen authored
Add Tigerlake HDMI codec support. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205379 BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=112171 Cc: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191105161053.22958-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Yong Zhi authored
Use devm_gpio_request() to automatic unroll when fails and avoid resource leaks at error paths. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Link: https://lore.kernel.org/r/1572905399-22402-1-git-send-email-yong.zhi@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Do not support mmap in S/PDIF mode. In S/PDIF mode the buffer has to be copied, to allow the channel status bits insertion. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
The unsolicited event handler for the headphone jack on CA0132 codec driver tries to reschedule the another delayed work with cancel_delayed_work_sync(). It's no good idea, unfortunately, especially after we changed the work queue to the standard global one; this may lead to a stall because both works are using the same global queue. Fix it by dropping the _sync but does call cancel_delayed_work() instead. Fixes: 993884f6 ("ALSA: hda/ca0132 - Delay HP amp turnon.") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Nov, 2019 2 commits
-
-
Kai Vehmanen authored
When ASoC card instance is removed containing a HDA codec, hdac_hda_codec_remove() may run in parallel with codec resume. This will cause problems if the HDA link is freed with snd_hdac_ext_bus_link_put() while the codec is still in middle of its resume process. To fix this, change the order such that pm_runtime_disable() is called before the link is freed. This will ensure any pending runtime PM action is completed before proceeding to free the link. This issue can be easily hit with e.g. SOF driver by loading and unloading the drivers. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191101170635.26389-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Sakamoto authored
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents configured source of sampling clock. The next lowest 8 bits represents whether the configured source is actually detected or not just after the register is changed for the source. Current implementation evaluates whole the register to detect configured source. This results in failure due to the next lowest 8 bits when the source is connected in advance. This commit fixes the bug. Fixes: 25784ec2 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 30 Oct, 2019 2 commits
-
-
Takashi Iwai authored
When a card is disconnected while in use, the system waits until all opened files are closed then releases the card. This is done via put_device() of the card device in each device release code. The recently reported mutex deadlock bug happens in this code path; snd_timer_close() for the timer device deals with the global register_mutex and it calls put_device() there. When this timer device is the last one, the card gets freed and it eventually calls snd_timer_free(), which has again the protection with the global register_mutex -- boom. Basically put_device() call itself is race-free, so a relative simple workaround is to move this put_device() call out of the mutex. For achieving that, in this patch, snd_timer_close_locked() got a new argument to store the card device pointer in return, and each caller invokes put_device() with the returned object after the mutex unlock. Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The commit ade49db3 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI") introduced the spec->pcm_lock mutex lock to the whole generic_hdmi_init() function for avoiding the race with the audio component registration. However, this caused a dead lock when the unsolicited event is handled without the audio component, as the codec gets runtime-resumed in hdmi_present_sense() which is already inside the spec->pcm_lock in its caller. For avoiding this deadlock, add a new mutex only for the audio component binding that is used in both generic_hdmi_init() and the audio notifier registration where the jack callbacks are handled / re-registered. Fixes: ade49db3 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI") Reported-and-tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/s5himo7i89i.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Oct, 2019 6 commits
-
-
Cheng-Yi Chiang authored
max98090 spec states that chip needs to be in turned-on state to supply mic bias. Enable SHDN dapm widget along with MICBIAS widget to actually turn on mic bias for proper headset button detection. This is similar to cht_ti_jack_event in sound/soc/intel/boards/cht_bsw_max98090_ti.c. Note that due to ts3a227e reports the jack event right away before the notifier is registered, if headset is plugged on boot, headset button will not get detected until headset is unplugged and plugged. This is still an issue to be fixed. Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20191028095229.99438-1-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
When non standard names are used it is possible that one of the directions are not provided, thus the flags needs to be present to tell the core that we have half duplex setup. Fixes: 642aafea ("ASoC: ti: remove compat dma probing") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191028115207.5142-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Navid Emamdoost authored
In the implementation of sof_set_get_large_ctrl_data() there is a memory leak in case an error. Release partdata if sof_get_ctrl_copy_params() fails. Fixes: 54d198d5 ("ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20191027215330.12729-1-navid.emamdoost@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Navid Emamdoost authored
In the implementation of sof_dfsentry_write() memory allocated for string is leaked in case of an error. Go to error handling path if the d_name.name is not valid. Fixes: 091c12e1 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20191027194856.4056-1-navid.emamdoost@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Keyon Jie authored
We are missing the 'CONFIG_' prefix when using the kernel configure item SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1, here correct them. Fixes: 43b2ab90 ('ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture') Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191025221538.6668-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
This reverts commit caa8422d. It turned out that this commit caused a regression at shutdown / reboot, as the synchronize_irq() calls seems blocking the whole shutdown. Also another part of the change about shuffling the call order looks suspicious; the azx_stop_chip() call disables the CORB / RIRB while the others may still need the CORB/RIRB update. Since the original commit itself was a cargo-fix, let's revert the whole patch. Fixes: caa8422d ("ALSA: hda: Flush interrupts on disabling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333 BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Oct, 2019 1 commit
-
-
Takashi Sakamoto authored
A helper function of ALSA bebob driver returns negative value in a function which has a prototype to return unsigned value. This commit fixes it by changing the prototype. Fixes: eb7b3a05 ("ALSA: bebob: Add commands and connections/streams management") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 24 Oct, 2019 3 commits
-
-
Aaron Ma authored
These 2 ThinkCentres installed a new realtek codec ID 0x623, it has 2 front mics with the same location on pin 0x18 and 0x19. Apply fixup ALC283_FIXUP_HEADSET_MIC to change 1 front mic location to right, then pulseaudio can handle them. One "Front Mic" and one "Mic" will be shown, and audio output works fine. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191024114439.31522-1-aaron.ma@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Support new codec ALC623. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ed97b6a8bd9445ecb48bc763d9aaba7a@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Justin Song authored
This patch adds native DSD support for Gustard U16/X26 USB Interface. Tested using VID and fp->dsd_raw method. Signed-off-by: Justin Song <flyingecar@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/CA+9XP1ipsFn+r3bCBKRinQv-JrJ+EHOGBdZWZoMwxFv0R8Y1MQ@mail.gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Oct, 2019 5 commits
-
-
Russell King authored
The devm conversion of kirkwood was incorrect; on removal, devm takes effect after the "remove" function has returned. So, the effect of the conversion was to change the order during remove from: - snd_soc_unregister_component() (unpublishes interfaces) - clk_disable_unprepare() - cleanup resources After the conversion, this became: - clk_disable_unprepare() - while the device may still be active - snd_soc_unregister_component() - cleanup resources Hence, it introduces a bug, where the internal clock for the device may be shut down before the device itself has been shut down. It is known that Marvell SoCs, including Dove, locks up if registers for a peripheral that has its clocks disabled are accessed. Fixes: f98fc0f8 ("ASoC: kirkwood: replace platform to component") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.ukSigned-off-by: Mark Brown <broonie@kernel.org>
-
Jiada Wang authored
Currently each SSI unit's busif dma address is calculated by following calculation formula: 0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400 But according to R-Car3 HW manual 41.1.4 Register Configuration, ssi9 4/5/6/7 busif data register address (SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF) are out of this rule. This patch updates the calculation formula to correct ssi9 4/5/6/7 busif data register address. Fixes: 5e45a6fa ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [erosca: minor improvements in commit description] Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20191022185429.12769-1-erosca@de.adit-jv.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Jerome Brunet authored
This reverts commit eb1ecadb. This fixes the following warning reported by lockdep and a potential issue with hibernation ==================================== WARNING: pulseaudio/1297 still has locks held! 5.3.0+ #1826 Not tainted ------------------------------------ 1 lock held by pulseaudio/1297: #0: ee815308 (&hcp->lock){....}, at: hdmi_codec_startup+0x20/0x130 stack backtrace: CPU: 0 PID: 1297 Comm: pulseaudio Not tainted 5.3.0+ #1826 Hardware name: Marvell Dove (Cubox) [<c0017b4c>] (unwind_backtrace) from [<c0014d10>] (show_stack+0x10/0x14) [<c0014d10>] (show_stack) from [<c00a2d18>] (futex_wait_queue_me+0x13c/0x19c) [<c00a2d18>] (futex_wait_queue_me) from [<c00a3630>] (futex_wait+0x184/0x24c) [<c00a3630>] (futex_wait) from [<c00a5e1c>] (do_futex+0x334/0x598) [<c00a5e1c>] (do_futex) from [<c00a62e8>] (sys_futex_time32+0x118/0x180) [<c00a62e8>] (sys_futex_time32) from [<c0009000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xebd31fa8 to 0xebd31ff0) 1fa0: 00000000 ffffffff 000c8748 00000189 00000001 00000000 1fc0: 00000000 ffffffff 00000000 000000f0 00000000 00000000 00000000 00056200 1fe0: 000000f0 beac03a8 b6d6c835 b6d6f456 Fixes: eb1ecadb ("ASoC: hdmi-codec: re-introduce mutex locking") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191023161203.28955-2-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Russell King authored
When our call to get the external clock fails, we forget to clean up the enabled internal clock correctly. Enable the clock after we have obtained all our resources. Fixes: 84aac6c7 ("ASoC: kirkwood: fix loss of external clock at probe time") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1iNGyK-0004oF-6A@rmk-PC.armlinux.org.ukSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pan Xiuli authored
Add HD Audio Device PCI ID for the Intel Tigerlake and Jasperlake platform. Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022194402.23178-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Oct, 2019 1 commit
-
-
Takashi Iwai authored
The recently introduced USB-audio descriptor validator had a stupid copy&paste error that may lead to an unexpected overlook of too short descriptors for processing and extension units. It's likely the cause of the report triggered by syzkaller fuzzer. Let's fix it. Fixes: 57f87706 ("ALSA: usb-audio: More validations of descriptor units") Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 21 Oct, 2019 4 commits
-
-
Xiaojun Sang authored
Parameter fragments and fragment_size are type of u32. U32_MAX is the correct check. Signed-off-by: Xiaojun Sang <xsang@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191021095432.5639-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Stephan Gerhold authored
According to the PM8916 Hardware Register Description, CDC_D_CDC_CONN_HPHR_DAC_CTL has only a single bit (RX_SEL) to switch between RX1 (0) and RX2 (1). It is not possible to disable it entirely to achieve the "ZERO" state. However, at the moment the "RDAC2 MUX" mixer defines three possible values ("ZERO", "RX2" and "RX1"). Setting the mixer to "ZERO" actually configures it to RX1. Setting the mixer to "RX1" has (seemingly) no effect. Remove "ZERO" and replace it with "RX1" to fix this. Fixes: 585e881e ("ASoC: codecs: Add msm8916-wcd analog codec") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20191020153007.206070-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
Merge tag 'asoc-fix-v5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.4 A collection of fixes that have arrived since the merge window. There are a small number of core fixes here but they are smaller ones around error handling.
-
Kailang Yang authored
Support new codec ALC711. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 18 Oct, 2019 4 commits
-
-
Dragos Tarcatu authored
All the kcontrol put() functions are currently returning 0 when successful. This does not go well with alsamixer as it does not seem to get notified on SND_CTL_EVENT_MASK_VALUE callbacks when values change for (some of) the sof kcontrols. This patch fixes that by returning true for volume, switch and enum type kcontrols when values do change in put(). Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191018123806.18063-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
The commit below, adds a call to sysclk callback on shutdown. This introduces a regression in stm32 SAI driver, as some clock services are called twice, leading to unbalanced calls. Move processing related to mclk from shutdown to sysclk callback. When requested frequency is 0, assume shutdown and release mclk. Fixes: 2458adb8 ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown") Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20191018082040.31022-1-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Chuhong Yuan authored
sof_audio_probe misses a check for devm_clk_get and may cause problems. Add a check for it to fix the bug. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191017025044.31474-1-hslester96@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Junya Monden authored
Unlike other format-related DAI parameters, rdai->bit_clk_inv flag is not properly re-initialized when setting format for new stream processing. The inversion, if requested, is then applied not to default, but to a previous value, which leads to SCKP bit in SSICR register being set incorrectly. Fix this by re-setting the flag to its initial value, determined by format. Fixes: 1a7889ca ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior") Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com> Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Timo Wischer <twischer@de.adit-jv.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by: Junya Monden <jmonden@jp.adit-jv.com> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 17 Oct, 2019 3 commits
-
-
Lukas Wunner authored
Przemysław Kopa reports that since commit b516ea58 ("PCI: Enable NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his 2011 Samsung laptop refuses to runtime suspend, resulting in a power regression and excessive heat. Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M) of the same era, as does another Arch Linux user named "R0AR" with a more recent GeForce GTX 1050 Ti (GP107M). The commit exposes the discrete GPU's HDA controller and all four codecs on the controller do not set the CLKSTOP and EPSS bits in the Supported Power States Response. They also do not set the PS-ClkStopOk bit in the Get Power State Response. hda_codec_runtime_suspend() therefore does not call snd_hdac_codec_link_down(), which prevents each codec and the PCI device from runtime suspending. The same issue is present on some AMD discrete GPUs and we addressed it by forcing runtime PM despite the bits not being set, see commit 57cb54e5 ("ALSA: hda - Force to link down at runtime suspend on ATI/AMD HDMI"). Do the same for Nvidia HDMI codecs. Fixes: b516ea58 ("PCI: Enable NVIDIA HDA controllers") Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512 Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81Reported-by: Przemysław Kopa <prymoo@gmail.com> Reported-by: Rivera Valdez <riveravaldez@ysinembargo.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Daniel Drake <dan@reactivated.net> Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Drake authored
On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to pin 0x19, with default configuration value 0x411111f0 (indicating no physical connection). Enable this by quirking the pin. Mic jack detection was also tested and found to be working. This enables use of the headset mic on this product. Signed-off-by: Daniel Drake <drake@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
Szabolcs Szőke authored
BOSS Katana amplifiers cannot be used for recording or playback if quirks are applied BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195223Signed-off-by: Szabolcs Szőke <szszoke.code@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191011171937.8013-1-szszoke.code@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Oct, 2019 2 commits
-
-
Daniel Baluta authored
asoc_simple_debug_info and asoc_simple_debug_dai must be static otherwise we might a compilation error if the compiler decides not to inline the given function. Fixes: 0580dde5 ("ASoC: simple-card-utils: add asoc_simple_debug_info()") Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20191009153615.32105-3-daniel.baluta@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Srinivas Kandagatla authored
This patch adds missing MIX2 path on RX1/2 which take IIR1 and IIR2 as inputs. Without this patch sound card fails to intialize with below warning: ASoC: no sink widget found for RX1 MIX2 INP1 ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1 ASoC: no sink widget found for RX2 MIX2 INP1 ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1 ASoC: no sink widget found for RX1 MIX2 INP1 ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1 ASoC: no sink widget found for RX2 MIX2 INP1 ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1 Reported-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191009111944.28069-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-