- 01 Apr, 2009 40 commits
-
-
Krzysztof Helt authored
Fix handling of the Cirrus Logic GD5434 chip. Distinguish this chip from the GD5430. It allows detecting memory size for both models correctly. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Helt authored
A memory clock (MCLK) is set at various places. Move the setting into one place. Set the MCLK only for Zorro cards as the x86 cards should be initialized by BIOS. Improve handling of the GD5434 (SD64). Kill one annoying debug output "virtual offset: ...". Signed-off-by:
-
Krzysztof Helt authored
Add an accelerator constant so almost all Cirrus are recognized as accelerators by the fbset command. Signed-off-by:
-
Krzysztof Helt authored
Cirrus' Alpine and Picasso4 chips uses DAC clock doubling to achieve full range of pixclock frequencies. [akpm@linux-foundation.org: fix spelling, use usual comment layout] Signed-off-by:
-
Krzysztof Helt authored
The 32bpp is supported only on the latest Cirrus Logic chips. Use the 24bpp which is supported at least since Alpine chips (GD543x). Change 32bpp mode setting to 24bpp mode. Change acceleration as well. Signed-off-by:
-
Krzysztof Helt authored
Various fixes to make Cirrus GD5446 chip work. Another Cirrus chip works with the cirrusfb. The gd5446 seems very similar to Alpine chips. Signed-off-by:
-
Krzysztof Helt authored
Balance iomap and iounmap and alloc and free calls in case of error druing device register (probing). Signed-off-by:
-
Krzysztof Helt authored
Add hardware color expansion (imageblit) function. It roughly doubles scrolling speed of my Alpine card (GD5430). Signed-off-by:
-
Krzysztof Helt authored
- Fix color expansion for 16bpp and 32bpp modes in the cirrusfb_RectFill(). - Make a function with a common blitter code (cirrusfb_set_blitter). - Add fb_sync function to allow a higher layer synchronize with the blitter. - Kill one redundant blitter reset. Signed-off-by:
-
Krzysztof Helt authored
- The Laguna GD5465 (AGP) has one register more than non-AGP chips. Recognize the AGP version and write a tile control register only on the AGP version. Tested only on an AGP card. - Bump up RAMDAC frequencies after X11 code. This allow to drive a flat panel resolution 1680x1050 at 16bpp from the 4MB card. - Fix screen start address overflow bits on Laguna cards (CRT1D register). - Fix exit path in the cirrusfb_pci_register() in case of error. Signed-off-by:
-
Krzysztof Helt authored
Break cirrusfb_decode_var() function into two parts: cirrusfb_check_pixclock() which can be called from the cirrusfb_check_var() aand merge rest into the cirrusfb_set_par_foo(). This allows rejecting modes with too high pixclock before before any change to hardware state (and a console is messed up). Also, fix RGB field's lengths for 8bpp modes to correct ones so X11 works with fbdev driver with cirrusfb. Kill some redundant function calls or register loads. Signed-off-by:
-
Krzysztof Helt authored
Fix 8bpp mode by adding handling of the Laguna chipsets to various places and stop trashing a HDR register which probably does not exist on the Laguna. Fix compilation warnings about uninitialized variables also. Finally, all 8bpp, 16bpp and 32bpp modes work on the Laguna chipset. Signed-off-by:
-
Krzysztof Helt authored
Various improvements to the code: - kill a structure with only one field: multiplexing and use the field directly - move the cirrusfb_ops structure down the file to kill forward declarations - move cirrusfb_init() to kill forward declaration - kill register loads done already in the init_vgachip() - kill assigments done by higher layer in the cirrusfb_pan_display() - do not overwrite line pitch bit in the CL_CRT1D register - kill btype variables if they were used only once or twice - add cpu_relax() in the busy waiting loop The fix to the CL_CRT1D register handling makess the 1024x768 32bpp mode work. Previously, only lower resolution modes have worked with 32bpp. Signed-off-by:
Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Krzysztof Helt authored
Use the 5-6-5 RGB mode instead of the 5-5-5 mode at 16bpp depth. It fixes colors in the 16bpp modes on Cirrus Laguna chips. Signed-off-by:
-
Krzysztof Helt authored
A line length is calculated twice: first in the cirrusfb_decode_var() then in the cirrusfb_set_par_foo(). Use the first calculated value. A nice side effect is that 32bpp mode works now. Signed-off-by:
-
Krzysztof Helt authored
The Laguna chipsets use special registers which are available through the mmio area. The cirrusfb driver does not use memory mapped registers for the PCI cards. Add the memory mapped area for Laguna chipsets and add basic usage of the special Laguna registers after SVGALIB code. This gives readable console at 16bpp on the GD-5465 (Laguna AGP). The 8bpp and 32bpp depths are still broken. Signed-off-by:
-
Krzysztof Helt authored
Add additional overflow register setting for Laguna chips. Also, simplify some code in the cirrusfb_pan_display() and cirrusfb_blank(). Signed-off-by:
-
Krzysztof Helt authored
Fix memory detection and clock setting for Cirrus Laguna chipsets (GD5464/GD5465). The changes are done after the Xorg code. The driver still does not display anything on the GD5465 but it switches resolutions correctly at least. Signed-off-by:
-
Krzysztof Helt authored
Convert all printks to dev_dbg, dev_info or dev_err. Kill some excessive debug information and code in the process. [akpm@linux-foundation.org: printk fixes] [akpm@linux-foundation.org: cleanups] Signed-off-by:
-
Randy Dunlap authored
Fix trailing whitespace because quilt complained about it. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Andrew Morton authored
GFP_KERNEL is legal here - we don't need to use gfp_any(). Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Roel Kluin authored
new_alarm is unsigned so test before the subtraction. [akpm@linux-foundation.org: time-wrapping fix] Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Mike Rapoport authored
Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Roel Kluin authored
With a postfix decrement retries will reach -1 rather than 0, so the warning and error-out will not occur. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Matthias Fuchs authored
Add support for the EPSON RX8025 RTC. The date/time registers of this chip are compatible with the DS1307. Signed-off-by:
Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by:
-
Ed Swierk authored
Allow the rtc-ds1307 driver to work with SMBus controllers like nforce2 that do not support i2c block transfers. Signed-off-by:
Ed Swierk <eswierk@aristanetworks.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: BARRE Sebastien <sbarre@sdelcc.com> Signed-off-by:
-
dann frazier authored
Signed-off-by:
dann frazier <dannf@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
dann frazier authored
Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
dann frazier authored
Signed-off-by:
-
dann frazier authored
Signed-off-by:
-
dann frazier authored
This isn't a hotpluggable device, so call platform_driver_probe directly in parisc_rtc_init Signed-off-by:
-
dann frazier authored
Use the return value of rtc_valid_tm() instead of just returning 0. Signed-off-by:
-
dann frazier authored
parisc_rtc now only includes an rtc_device pointer, so let's just use the rtc_device type directly. Signed-off-by:
-
dann frazier authored
The RTC subsystem proides ops locking, no need to implement our own Signed-off-by:
-
dann frazier authored
Signed-off-by:
-
dann frazier authored
Munge Stephane Eranian's efirtc.c code into an rtc platform driver [akpm@linux-foundation.org: use is_leap_year()] Signed-off-by:
-
Andrew Morton authored
- the LEAP_YEAR macro is buggy - it references its arg multiple times. Fix this by turning it into a C function. - give it a more approriate name - Move it to rtc.h so that other .c files can use it, instead of copying it. Cc: dann frazier <dannf@hp.com> Acked-by:
Alessandro Zummo <alessandro.zummo@towertech.it> Cc: stephane eranian <eranian@googlemail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Mark Brown authored
These are the only two ioctls so the ioctl() function is also removed. Signed-off-by:
-
Ian Kent authored
autofs_dev-ioctl.h is included by both the kernel module and user space tools and it includes two kernel header files. Compiles work if the kernel headers are installed but fail otherwise. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Ian Kent authored
A deadlock can occur when user space uses a signal (autofs version 4 uses SIGCHLD for this) to effect expire completion. The order of events is: Expire process completes, but before being able to send SIGCHLD to it's parent ... Another process walks onto a different mount point and drops the directory inode semaphore prior to sending the request to the daemon as it must ... A third process does an lstat on on the expired mount point causing it to wait on expire completion (unfortunately) holding the directory semaphore. The mount request then arrives at the daemon which does an lstat and, deadlock. For some time I was concerned about releasing the directory semaphore around the expire wait in autofs4_lookup as well as for the mount call back. I finally realized that the last round of changes in this function made the expiring dentry and the lookup dentry separate and distinct so the check and possible wait can be done anywhere prior to the mount call back. This patch moves the check to just before the mount call back and inside the directory inode mutex release. Signed-off-by:
-
