JingZao(京造) WKB603 keyboard is a rebranded product of Jamesdonkey RS2
keyboard, identified as "hfd.cn WKB603" in wired mode, "WKB603" in bluetooth
mode. Adding them to the list of non-apple keyboards fixes function key.
Signed-off-by: Yan Jun <jerrysteve1101@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Commit 46a0a2c9 ("HID: lenovo: Detect quirk-free fw on cptkbd and
stop applying workaround") introduced a regression for ThinkPad
TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses
the same workarounds) but slightly different so that there are
false-positives during detecting well-behaving firmware. This commit
restricts detecting well-behaving firmware to the only model which
known to have one and have stable enough quirks to not cause
false-positives.

Fixes: 46a0a2c9 ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround")
Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/
Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.

Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.

Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.

This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.

Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Since I switched the MAINTAINERS entry to @kernel.org some time
ago, let's canonicalize my addressess to it.
Signed-off-by: Jiri Kosina <jikos@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host.  The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.

The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present.  As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.

Fix the above issue by setting back brightness to the level it had
before entering a sleep state.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit 9d1bd934.

Multiple people reported misbehaving devices and reverting this commit fixes
the problem for them. As soon as the original commit author starts reacting
again, we can try to figure out why he hasn't seen the issues (mismatching
report descriptors?), but for the time being, fix for 6.7 by reverting.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094

Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.

The offending portion of the descriptor: (from hid-decode)

0x95, 0x05,                    //  Report Count (5)                   30
0x75, 0x08,                    //  Report Size (8)                    32
0x15, 0x00,                    //  Logical Minimum (0)                34
0x25, 0x65,                    //  Logical Maximum (101)              36
0x05, 0x07,                    //  Usage Page (Keyboard)              38
0x19, 0x01,                    //  Usage Minimum (1)                  40
0x29, 0x65,                    //  Usage Maximum (101)                42
0x81, 0x00,                    //  Input (Data,Arr,Abs)               44

This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.

Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.

Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.
Signed-off-by: Brett Raye <braye@fastmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

hid_debug_events_release releases resources bound to the HID device instance.
hid_device_release releases the underlying HID device instance potentially
before hid_debug_events_release has completed releasing debug resources bound
to the same HID device instance.

Reference count to prevent the HID device instance from being torn down
preemptively when HID debugging support is used. When count reaches zero,
release core resources of HID device instance using hiddev_free.

The crash:

[  120.728477][ T4396] kernel BUG at lib/list_debug.c:53!
[  120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168
[  120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257
[  120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT)
[  120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[  120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac
[  120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac
[  120.779120][ T4396] sp : ffffffc01e62bb60
[  120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200
[  120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000
[  120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00
[  120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8
[  120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000
[  120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058
[  120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000
[  120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff
[  120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003
[  120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003
[  120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300
[  120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5
[  120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000
[  120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948
[  120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054
[  120.873122][ T4396] Call trace:
[  120.876259][ T4396]  __list_del_entry_valid+0x98/0xac
[  120.881304][ T4396]  hid_debug_events_release+0x48/0x12c
[  120.886617][ T4396]  full_proxy_release+0x50/0xbc
[  120.891323][ T4396]  __fput+0xdc/0x238
[  120.895075][ T4396]  ____fput+0x14/0x24
[  120.898911][ T4396]  task_work_run+0x90/0x148
[  120.903268][ T4396]  do_exit+0x1bc/0x8a4
[  120.907193][ T4396]  do_group_exit+0x8c/0xa4
[  120.911458][ T4396]  get_signal+0x468/0x744
[  120.915643][ T4396]  do_signal+0x84/0x280
[  120.919650][ T4396]  do_notify_resume+0xd0/0x218
[  120.924262][ T4396]  work_pending+0xc/0x3f0

[ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ]
Fixes: cd667ce2 ("HID: use debugfs for events/reports dumping")
Signed-off-by: Charles Yi <be286@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Jamesdonkey A3R keyboard is identified as "Jamesdonkey A3R" in wired
mode, "A3R-U" in wireless mode and "A3R" in bluetooth mode. Adding them
to non-apple keyboards fixes function key.
Signed-off-by: Yihong Cao <caoyihong4@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

During the probe we add an I2C adapter and as soon as we add that adapter
it may be used for a transfer (e.g via the code in i2cdetect()).
Those transfers are not able to complete and time out. This is because the
HID raw_event callback (mcp2221_raw_event) will not be invoked until the
HID device's 'driver_input_lock' is marked up at the completion of the
probe in hid_device_probe(). This starves the driver of the responses it
is waiting for.
In order to allow the I2C transfers to complete while we are still in the
probe, start the IO once we have completed init of the HID device.

This issue seems to have been seen before and a patch was submitted but
it seems it was never accepted. See:
https://lore.kernel.org/all/20221103222714.21566-3-Enrik.Berkhan@inka.de/Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The process of adding an I2C adapter can invoke I2C accesses on that new
adapter (see i2c_detect()).

Ensure we have set the adapter's driver data to avoid null pointer
dereferences in the xfer functions during the adapter add.

This has been noted in the past and the same fix proposed but not
completed. See:
https://lore.kernel.org/lkml/ef597e73-ed71-168e-52af-0d19b03734ac@vigem.de/Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic
   driver (Jinjie Ruan)

 - HID selftests fixes and improvements (Benjamin Tissoires)

 - probe error handling path fixes in hid-nvidia-shield driver
   (Christophe JAILLET)

 - cleanup of LED handling in hid-nintendo (Martino Fontana)

 - big cleanup of logitech-hidpp probe code (Hans de Goede)

 - Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin)

 - firmware detection improvement for Lenovo cptkbd (Mikhail
   Khvainitski)

 - IRQ shutdown and workqueue initialization fixes for hid-cp2112 driver
   (Danny Kaehn)

 - #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)

 - other assorted device-ID additions and quirks

* tag 'for-linus-2023110101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
  HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W
  HID: logitech-hidpp: Stop IO before calling hid_connect()
  HID: logitech-hidpp: Drop HIDPP_QUIRK_UNIFYING
  HID: logitech-hidpp: Drop delayed_work_cb()
  HID: logitech-hidpp: Fix connect event race
  HID: logitech-hidpp: Remove unused connected param from *_connect()
  HID: logitech-hidpp: Remove connected check for non-unifying devices
  HID: logitech-hidpp: Add hidpp_non_unifying_init() helper
  HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check
  HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init()
  HID: logitech-hidpp: Remove wtp_get_config() call from probe()
  HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event()
  HID: logitech-hidpp: Revert "Don't restart communication if not necessary"
  HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only
  HID: rmi: remove #ifdef CONFIG_PM
  HID: multitouch: remove #ifdef CONFIG_PM
  HID: usbhid: remove #ifdef CONFIG_PM
  HID: core: remove #ifdef CONFIG_PM from hid_driver
  hid: lenovo: Resend all settings on reset_resume for compact keyboards
  HID: uclogic: Fix a work->entry not empty bug in __queue_work()
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...

Pull smb server updates from Steve French:
 "Seven ksmbd server fixes:

   - logoff improvement for multichannel bound connections

   - unicode fix for surrogate pairs

   - RDMA (smbdirect) fix for IB devices

   - fix locking deadlock in kern_path_create during rename

   - iov memory allocation fix

   - two minor cleanup patches (doc cleanup, and unused variable)"

* tag '6.7-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: no need to wait for binded connection termination at logoff
  ksmbd: add support for surrogate pair conversion
  ksmbd: fix missing RDMA-capable flag for IPoIB device in ksmbd_rdma_capable_netdev()
  ksmbd: fix recursive locking in vfs helpers
  ksmbd: fix kernel-doc comment of ksmbd_vfs_setxattr()
  ksmbd: reorganize ksmbd_iov_pin_rsp()
  ksmbd: Remove unused field in ksmbd_user struct

Pull fsnotify update from Jan Kara:
 "This time just one tiny cleanup for fsnotify"

* tag 'fsnotify_for_v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: delete useless parenthesis in FANOTIFY_INLINE_FH macro

Pull ext2, udf, and quota updates from Jan Kara:

 - conversion of ext2 directory code to use folios

 - cleanups in UDF declarations

 - bugfix for quota interaction with file encryption

* tag 'fs_for_v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Convert ext2_prepare_chunk and ext2_commit_chunk to folios
  ext2: Convert ext2_make_empty() to use a folio
  ext2: Convert ext2_unlink() and ext2_rename() to use folios
  ext2: Convert ext2_delete_entry() to use folios
  ext2: Convert ext2_empty_dir() to use a folio
  ext2: Convert ext2_add_link() to use a folio
  ext2: Convert ext2_readdir to use a folio
  ext2: Add ext2_get_folio()
  ext2: Convert ext2_check_page to ext2_check_folio
  highmem: Add folio_release_kmap()
  udf: Avoid unneeded variable length array in struct fileIdentDesc
  udf: Annotate struct udf_bitmap with __counted_by
  quota: explicitly forbid quota files from being encrypted

Pull jfs updates from Dave Kleikamp:
 "Minor stability improvements"

* tag 'jfs-6.7' of https://github.com/kleikamp/linux-shaggy:
  jfs: define xtree root and page independently
  jfs: fix array-index-out-of-bounds in diAlloc
  jfs: fix array-index-out-of-bounds in dbFindLeaf
  fs/jfs: Add validity check for db_maxag and db_agpref
  fs/jfs: Add check for negative db_l2nbperpage

Pull exfat updates from Namjae Jeon:

 - Add ioctls to get and set file attribute that is used in
   the fatattr util

 - Add zero_size_dir mount option to avoid allocating a cluster
   when creating a directory

* tag 'exfat-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: support create zero-size directory
  exfat: support handle zero-size directory
  exfat: add ioctls for accessing attributes

Pull erofs updates from Gao Xiang:
 "Nothing exciting lands for this cycle, since we're still busying in
  developing support for sub-page blocks and large-folios of compressed
  data for new scenarios on Android.

  In this cycle, MicroLZMA format is marked as stable, and there are
  minor cleanups around documentation and codebase. In addition, it also
  fixes incorrect lockref usage in erofs_insert_workgroup().

  Summary:

   - Fix inode metadata space layout documentation

   - Avoid warning for MicroLZMA format anymore

   - Fix erofs_insert_workgroup() lockref usage

   - Some cleanups"

* tag 'erofs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix erofs_insert_workgroup() lockref usage
  erofs: tidy up redundant includes
  erofs: get rid of ROOT_NID()
  erofs: simplify compression configuration parser
  erofs: don't warn MicroLZMA format anymore
  erofs: fix inode metadata space layout description in documentation

Pull ext4 updates from Ted Ts'o:
 "Cleanup ext4's multi-block allocator, including adding some unit
  tests, as well as cleaning how we update the backup superblock after
  online resizes or updating the label or uuid.

  Optimize handling of released data blocks in ext4's commit machinery
  to avoid a potential lock contention on s_md_lock spinlock.

  Fix a number of ext4 bugs:

   - fix race between writepages and remount

   - fix racy may inline data check in dio write

   - add missed brelse in an error path in update_backups

   - fix umask handling when ACL support is disabled

   - fix lost EIO error when a journal commit races with a fsync of the
     blockdev

   - fix potential improper i_size when there is a crash right after an
     O_SYNC direct write.

   - check extent node for validity before potentially using what might
     be an invalid pointer

   - fix potential stale data exposure when writing to an unwritten
     extent and the file system is nearly out of space

   - fix potential accounting error around block reservations when
     writing partial delayed allocation writes to a bigalloc cluster

   - avoid memory allocation failure when tracking partial delayed
     allocation writes to a bigalloc cluster

   - fix various debugging print messages"

* tag 'ext4_for_linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (41 commits)
  ext4: properly sync file size update after O_SYNC direct IO
  ext4: fix racy may inline data check in dio write
  ext4: run mballoc test with different layouts setting
  ext4: add first unit test for ext4_mb_new_blocks_simple in mballoc
  ext4: add some kunit stub for mballoc kunit test
  ext4: call ext4_mb_mark_context in ext4_group_add_blocks()
  ext4: Separate block bitmap and buddy bitmap freeing in ext4_group_add_blocks()
  ext4: call ext4_mb_mark_context in ext4_mb_clear_bb
  ext4: Separate block bitmap and buddy bitmap freeing in ext4_mb_clear_bb()
  ext4: call ext4_mb_mark_context in ext4_mb_mark_diskspace_used
  ext4: extend ext4_mb_mark_context to support allocation under journal
  ext4: call ext4_mb_mark_context in ext4_free_blocks_simple
  ext4: factor out codes to update block bitmap and group descriptor on disk from ext4_mb_mark_bb
  ext4: make state in ext4_mb_mark_bb to be bool
  jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev
  ext4: apply umask if ACL support is disabled
  ext4: mark buffer new if it is unwritten to avoid stale data exposure
  ext4: move 'ix' sanity check to corrent position
  jbd2: fix printk format type for 'io_block' in do_one_pass()
  jbd2: print io_block if check data block checksum failed when do recovery
  ...

Pull dlm updates from David Teigland:
 "This set of patches has some minor fixes for message handling, some
  misc cleanups, and updates the maintainers entry"

* tag 'dlm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  MAINTAINERS: Update dlm maintainer and web page
  dlm: slow down filling up processing queue
  dlm: fix no ack after final message
  dlm: be sure we reset all nodes at forced shutdown
  dlm: fix remove member after close call
  dlm: fix creating multiple node structures
  fs: dlm: Remove some useless memset()
  fs: dlm: Fix the size of a buffer in dlm_create_debug_file()
  fs: dlm: Simplify buffer size computation in dlm_create_debug_file()

We consistently switched from kmalloc() to vmalloc() in module
decompression to prevent potential memory allocation failures with large
modules, however vmalloc() is not as memory-efficient and fast as
kmalloc().

Since we don't know in general the size of the workspace required by the
decompression algorithm, it is more reasonable to use kvmalloc()
consistently, also considering that we don't have special memory
requirements here.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull integrity updates from Mimi Zohar:
 "Four integrity changes: two IMA-overlay updates, an integrity Kconfig
  cleanup, and a secondary keyring update"

* tag 'integrity-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: detect changes to the backing overlay file
  certs: Only allow certs signed by keys on the builtin keyring
  integrity: fix indentation of config attributes
  ima: annotate iint mutex to avoid lockdep false positive warnings

Pull modules updates from Luis Chamberlain:
 "The only thing worth highligthing is that gzip moves to use vmalloc()
  instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.

  The rest is regular house keeping, keeping things neat, tidy, and
  boring"

[ The kmalloc -> vmalloc conversion is not the right approach.

  Unless you know you need huge areas or know you need to use virtual
  mappings for some reason (playing with protection bits or whatever),
  you should use kvmalloc()/kvfree, which automatically picks the right
  allocation model    - Linus ]

* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: Annotate struct module_notes_attrs with __counted_by
  module: Fix comment typo
  module: Make is_valid_name() return bool
  module: Make is_mapping_symbol() return bool
  module/decompress: use vmalloc() for gzip decompression workspace
  MAINTAINERS: add include/linux/module*.h to modules
  module: Clarify documentation of module_param_call()

Pull sysctl updates from Luis Chamberlain:
 "To help make the move of sysctls out of kernel/sysctl.c not incur a
  size penalty sysctl has been changed to allow us to not require the
  sentinel, the final empty element on the sysctl array. Joel Granados
  has been doing all this work. On the v6.6 kernel we got the major
  infrastructure changes required to support this. For v6.7-rc1 we have
  all arch/ and drivers/ modified to remove the sentinel. Both arch and
  driver changes have been on linux-next for a bit less than a month. It
  is worth re-iterating the value:

   - this helps reduce the overall build time size of the kernel and run
     time memory consumed by the kernel by about ~64 bytes per array

   - the extra 64-byte penalty is no longer inncurred now when we move
     sysctls out from kernel/sysctl.c to their own files

  For v6.8-rc1 expect removal of all the sentinels and also then the
  unneeded check for procname == NULL.

  The last two patches are fixes recently merged by Krister Johansen
  which allow us again to use softlockup_panic early on boot. This used
  to work but the alias work broke it. This is useful for folks who want
  to detect softlockups super early rather than wait and spend money on
  cloud solutions with nothing but an eventual hung kernel. Although
  this hadn't gone through linux-next it's also a stable fix, so we
  might as well roll through the fixes now"

* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
  watchdog: move softlockup_panic back to early_param
  proc: sysctl: prevent aliased sysctls from getting passed to init
  intel drm: Remove now superfluous sentinel element from ctl_table array
  Drivers: hv: Remove now superfluous sentinel element from ctl_table array
  raid: Remove now superfluous sentinel element from ctl_table array
  fw loader: Remove the now superfluous sentinel element from ctl_table array
  sgi-xp: Remove the now superfluous sentinel element from ctl_table array
  vrf: Remove the now superfluous sentinel element from ctl_table array
  char-misc: Remove the now superfluous sentinel element from ctl_table array
  infiniband: Remove the now superfluous sentinel element from ctl_table array
  macintosh: Remove the now superfluous sentinel element from ctl_table array
  parport: Remove the now superfluous sentinel element from ctl_table array
  scsi: Remove now superfluous sentinel element from ctl_table array
  tty: Remove now superfluous sentinel element from ctl_table array
  xen: Remove now superfluous sentinel element from ctl_table array
  hpet: Remove now superfluous sentinel element from ctl_table array
  c-sky: Remove now superfluous sentinel element from ctl_talbe array
  powerpc: Remove now superfluous sentinel element from ctl_table arrays
  riscv: Remove now superfluous sentinel element from ctl_table array
  x86/vdso: Remove now superfluous sentinel element from ctl_table array
  ...

Pull documentation updates from Jonathan Corbet:
 "The number of commits for documentation is not huge this time around,
  but there are some significant changes nonetheless:

   - Some more Spanish-language and Chinese translations

   - The much-discussed documentation of the confidential-computing
     threat model

   - Powerpc and RISCV documentation move under Documentation/arch -
     these complete this particular bit of documentation churn

   - A large traditional-Chinese documentation update

   - A new document on backporting and conflict resolution

   - Some kernel-doc and Sphinx fixes

  Plus the usual smattering of smaller updates and typo fixes"

* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
  scripts/kernel-doc: Fix the regex for matching -Werror flag
  docs: backporting: address feedback
  Documentation: driver-api: pps: Update PPS generator documentation
  speakup: Document USB support
  doc: blk-ioprio: Bring the doc in line with the implementation
  docs: usb: fix reference to nonexistent file in UVC Gadget
  docs: doc-guide: mention 'make refcheckdocs'
  Documentation: fix typo in dynamic-debug howto
  scripts/kernel-doc: match -Werror flag strictly
  Documentation/sphinx: Remove the repeated word "the" in comments.
  docs: sparse: add SPDX-License-Identifier
  docs/zh_CN: Add subsystem-apis Chinese translation
  docs/zh_TW: update contents for zh_TW
  docs: submitting-patches: encourage direct notifications to commenters
  docs: add backporting and conflict resolution document
  docs: move riscv under arch
  docs: update link to powerpc/vmemmap_dedup.rst
  mm/memory-hotplug: fix typo in documentation
  docs: move powerpc under arch
  PCI: Update the devres documentation regarding to pcim_*()
  ...

Merge tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:

 - kbuild kselftest-merge target fixes

 - fixes to several tests

 - resctrl test fixes and enhancements

 - ksft_perror() helper and reporting improvements

 - printf attribute to kselftest prints to improve reporting

 - documentation and clang build warning fixes

The bulk of the patches are for resctrl fixes and enhancements.

* tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (51 commits)
  selftests/resctrl: Fix MBM test failure when MBA unavailable
  selftests/clone3: Report descriptive test names
  selftests:modify the incorrect print format
  selftests/efivarfs: create-read: fix a resource leak
  selftests/ftrace: Add riscv support for kprobe arg tests
  selftests/ftrace: add loongarch support for kprobe args char tests
  selftests/amd-pstate: Added option to provide perf binary path
  selftests/amd-pstate: Fix broken paths to run workloads in amd-pstate-ut
  selftests/resctrl: Move run_benchmark() to a more fitting file
  selftests/resctrl: Fix schemata write error check
  selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests
  selftests/resctrl: Fix feature checks
  selftests/resctrl: Refactor feature check to use resource and feature name
  selftests/resctrl: Move _GNU_SOURCE define into Makefile
  selftests/resctrl: Remove duplicate feature check from CMT test
  selftests/resctrl: Extend signal handler coverage to unmount on receiving signal
  selftests/resctrl: Fix uninitialized .sa_flags
  selftests/resctrl: Cleanup benchmark argument parsing
  selftests/resctrl: Remove ben_count variable
  selftests/resctrl: Make benchmark command const and build it with pointers
  ...

Merge tag 'linux_kselftest-kunit-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:

 - string-stream testing enhancements

 - several fixes memory leaks

 - fix to reset status during parameter handling

* tag 'linux_kselftest-kunit-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: test: Fix the possible memory leak in executor_test
  kunit: Fix possible memory leak in kunit_filter_suites()
  kunit: Fix the wrong kfree of copy for kunit_filter_suites()
  kunit: Fix missed memory release in kunit_free_suite_set()
  kunit: Reset test status on each param iteration
  kunit: string-stream: Test performance of string_stream
  kunit: Use string_stream for test log
  kunit: string-stream: Add tests for freeing resource-managed string_stream
  kunit: string-stream: Decouple string_stream from kunit
  kunit: string-stream: Add kunit_alloc_string_stream()
  kunit: Don't use a managed alloc in is_literal()
  kunit: string-stream-test: Add cases for string_stream newline appending
  kunit: string-stream: Add option to make all lines end with newline
  kunit: string-stream: Improve testing of string_stream
  kunit: string-stream: Don't create a fragment for empty strings

Pull iommufd updates from Jason Gunthorpe:
 "This brings three new iommufd capabilities:

   - Dirty tracking for DMA.

     AMD/ARM/Intel CPUs can now record if a DMA writes to a page in the
     IOPTEs within the IO page table. This can be used to generate a
     record of what memory is being dirtied by DMA activities during a
     VM migration process. A VMM like qemu will combine the IOMMU dirty
     bits with the CPU's dirty log to determine what memory to transfer.

     VFIO already has a DMA dirty tracking framework that requires PCI
     devices to implement tracking HW internally. The iommufd version
     provides an alternative that the VMM can select, if available. The
     two are designed to have very similar APIs.

   - Userspace controlled attributes for hardware page tables
     (HWPT/iommu_domain). There are currently a few generic attributes
     for HWPTs (support dirty tracking, and parent of a nest). This is
     an entry point for the userspace iommu driver to control the HW in
     detail.

   - Nested translation support for HWPTs. This is a 2D translation
     scheme similar to the CPU where a DMA goes through a first stage to
     determine an intermediate address which is then translated trough a
     second stage to a physical address.

     Like for CPU translation the first stage table would exist in VM
     controlled memory and the second stage is in the kernel and matches
     the VM's guest to physical map.

     As every IOMMU has a unique set of parameter to describe the S1 IO
     page table and its associated parameters the userspace IOMMU driver
     has to marshal the information into the correct format.

     This is 1/3 of the feature, it allows creating the nested
     translation and binding it to VFIO devices, however the API to
     support IOTLB and ATC invalidation of the stage 1 io page table,
     and forwarding of IO faults are still in progress.

  The series includes AMD and Intel support for dirty tracking. Intel
  support for nested translation.

  Along the way are a number of internal items:

   - New iommu core items: ops->domain_alloc_user(),
     ops->set_dirty_tracking, ops->read_and_clear_dirty(),
     IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user

   - UAF fix in iopt_area_split()

   - Spelling fixes and some test suite improvement"

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (52 commits)
  iommufd: Organize the mock domain alloc functions closer to Joerg's tree
  iommufd/selftest: Fix page-size check in iommufd_test_dirty()
  iommufd: Add iopt_area_alloc()
  iommufd: Fix missing update of domains_itree after splitting iopt_area
  iommu/vt-d: Disallow read-only mappings to nest parent domain
  iommu/vt-d: Add nested domain allocation
  iommu/vt-d: Set the nested domain to a device
  iommu/vt-d: Make domain attach helpers to be extern
  iommu/vt-d: Add helper to setup pasid nested translation
  iommu/vt-d: Add helper for nested domain allocation
  iommu/vt-d: Extend dmar_domain to support nested domain
  iommufd: Add data structure for Intel VT-d stage-1 domain allocation
  iommu/vt-d: Enhance capability check for nested parent domain allocation
  iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC with nested HWPTs
  iommufd/selftest: Add nested domain allocation for mock domain
  iommu: Add iommu_copy_struct_from_user helper
  iommufd: Add a nested HW pagetable object
  iommu: Pass in parent domain with user_data to domain_alloc_user op
  iommufd: Share iommufd_hwpt_alloc with IOMMUFD_OBJ_HWPT_NESTED
  iommufd: Derive iommufd_hwpt_paging from iommufd_hw_pagetable
  ...

Pull more networking updates from Jakub Kicinski:

 - Support GRO decapsulation for IPsec ESP in UDP

 - Add a handful of MODULE_DESCRIPTION()s

 - Drop questionable alignment check in TCP AO to avoid
   build issue after changes in the crypto tree

* tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
  net: tcp: remove call to obsolete crypto_ahash_alignmask()
  net: fill in MODULE_DESCRIPTION()s under drivers/net/
  net: fill in MODULE_DESCRIPTION()s under net/802*
  net: fill in MODULE_DESCRIPTION()s under net/core
  net: fill in MODULE_DESCRIPTION()s in kuba@'s modules
  xfrm: policy: fix layer 4 flowi decoding
  xfrm Fix use after free in __xfrm6_udp_encap_rcv.
  xfrm: policy: replace session decode with flow dissector
  xfrm: move mark and oif flowi decode into common code
  xfrm: pass struct net to xfrm_decode_session wrappers
  xfrm: Support GRO for IPv6 ESP in UDP encapsulation
  xfrm: Support GRO for IPv4 ESP in UDP encapsulation
  xfrm: Use the XFRM_GRO to indicate a GRO call on input
  xfrm: Annotate struct xfrm_sec_ctx with __counted_by
  xfrm: Remove unused function declarations

Pull probes updates from Masami Hiramatsu:
 "Cleanups:

   - kprobes: Fixes typo in kprobes samples

   - tracing/eprobes: Remove 'break' after return

  kretprobe/fprobe performance improvements:

   - lib: Introduce new `objpool`, which is a high performance lockless
     object queue. This uses per-cpu ring array to allocate/release
     objects from the pre-allocated object pool.

     Since the index of ring array is a 32bit sequential counter, we can
     retry to push/pop the object pointer from the ring without lock (as
     seq-lock does)

   - lib: Add an objpool test module to test the functionality and
     evaluate the performance under some circumstances

   - kprobes/fprobe: Improve kretprobe and rethook scalability
     performance with objpool.

     This improves both legacy kretprobe and fprobe exit handler (which
     is based on rethook) to be scalable on SMP systems. Even with
     8-threads parallel test, it shows a great scalability improvement

   - Remove unneeded freelist.h which is replaced by objpool

   - objpool: Add maintainers entry for the objpool

   - objpool: Fix to remove unused include header lines"

* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  kprobes: unused header files removed
  MAINTAINERS: objpool added
  kprobes: freelist.h removed
  kprobes: kretprobe scalability improvement
  lib: objpool test module added
  lib: objpool added: ring-array based lockless MPMC
  tracing/eprobe: drop unneeded breaks
  samples: kprobes: Fixes a typo

Pull bootconfig updates from Masami Hiramatsu:

 - Documentation update for /proc/cmdline, which includes both the
   parameters from bootloader and the embedded parameters in the kernel

 - fs/proc: Add bootloader argument as a comment line to
   /proc/bootconfig so that the user can distinguish what parameters
   were passed from bootloader even if bootconfig modified that

 - Documentation fix to add /proc/bootconfig to proc.rst

* tag 'bootconfig-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  doc: Add /proc/bootconfig to proc.rst
  fs/proc: Add boot loader arguments as comment to /proc/bootconfig
  doc: Update /proc/cmdline documentation to include boot config

Pull ia64 removal and asm-generic updates from Arnd Bergmann:

 - The ia64 architecture gets its well-earned retirement as planned,
   now that there is one last (mostly) working release that will be
   maintained as an LTS kernel.

 - The architecture specific system call tables are updated for the
   added map_shadow_stack() syscall and to remove references to the
   long-gone sys_lookup_dcookie() syscall.

* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  hexagon: Remove unusable symbols from the ptrace.h uapi
  asm-generic: Fix spelling of architecture
  arch: Reserve map_shadow_stack() syscall number for all architectures
  syscalls: Cleanup references to sys_lookup_dcookie()
  Documentation: Drop or replace remaining mentions of IA64
  lib/raid6: Drop IA64 support
  Documentation: Drop IA64 from feature descriptions
  kernel: Drop IA64 support from sig_fault handlers
  arch: Remove Itanium (IA-64) architecture

Pull ARM SoC code updates from Arnd Bergmann:
 "The AMD Pensando DPU platform gets added to arm64, and some minor
  updates make it into Renesas' 32-bit platforms"

* tag 'soc-arm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}
  arm64: Add config for AMD Pensando SoC platforms
  MAINTAINERS: Add entry for AMD PENSANDO
  ARM: shmobile: sh73a0: Reserve boot area when SMP is enabled
  ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Reserve boot area when SMP is enabled
  ARM: shmobile: rcar-gen2: Remove unneeded once handling

Pull ARM defconfig updates from Arnd Bergmann:
 "These are the usual trivial changes to enable a couple of newly added
  device drivers and remove lines for Kconfig options that are no longer
  needed"

* tag 'soc-defconfig-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: enable DisplayPort altmode support
  arm64: defconfig: enable CONFIG_TYPEC_QCOM_PMIC
  arm64: defconfig: add various drivers for Amlogic based boards
  ARM: config: aspeed: Remove FIRMWARE_MEMMAP
  ARM: config: aspeed_g5: Enable SSIF BMC driver
  ARM: config: aspeed: Add Ampere SMPro drivers
  ARM: config: aspeed: Add new FSI drivers
  arm64: defconfig: Enable TPS6593 PMIC for SK-AM62A
  ARM: exynos_defconfig: add driver for ISL29018
  ARM: multi_v7_defconfig: add drivers for S5C73M3 & S5K6A3 camera sensors
  arm64: defconfig: Enable RZ/G3S (R9A08G045) SoC
  ARM: multi_v7_defconfig: add tm2-touchkey driver
  ARM: exynos_defconfig: replace SATA_AHCI_PLATFORM with AHCI_DWC driver
  ARM: multi_v7_defconfig: add AHCI_DWC driver
  ARM: multi_v7_defconfig: make Exynos related PHYs modules
  ARM: s5pv210_defconfig: enable IIO required by MAX17040
  ARM: shmobile: defconfig: Refresh for v6.6-rc3
  ARM: defconfig: cleanup orphaned CONFIGs
  arm64: defconfig: Enable Samsung DSIM driver
  arm64: defconfig: Enable CONFIG_USB_MASS_STORAGE
  ...

Pull SoC driver updates from Arnd Bergmann:
 "The highlights for the driver support this time are

   - Qualcomm platforms gain support for the Qualcomm Secure Execution
     Environment firmware interface to access EFI variables on certain
     devices, and new features for multiple platform and firmware
     drivers.

   - Arm FF-A firmware support gains support for v1.1 specification
     features, in particular notification and memory transaction
     descriptor changes.

   - SCMI firmware support now support v3.2 features for clock and DVFS
     configuration and a new transport for Qualcomm platforms.

   - Minor cleanups and bugfixes are added to pretty much all the active
     platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
     amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
     more.

     In particular, this contains portions of the treewide conversion to
     use __counted_by annotations and the device_get_match_data helper"

* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
  soc: qcom: pmic_glink_altmode: Print return value on error
  firmware: qcom: scm: remove unneeded 'extern' specifiers
  firmware: qcom: scm: add a missing forward declaration for struct device
  firmware: qcom: move Qualcomm code into its own directory
  soc: samsung: exynos-chipid: Convert to platform remove callback returning void
  soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
  soc: qcom: pmic_glink: fix connector type to be DisplayPort
  soc: ti: k3-socinfo: Avoid overriding return value
  soc: ti: k3-socinfo: Fix typo in bitfield documentation
  soc: ti: knav_qmss_queue: Use device_get_match_data()
  firmware: ti_sci: Use device_get_match_data()
  firmware: qcom: qseecom: add missing include guards
  soc/pxa: ssp: Convert to platform remove callback returning void
  soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
  soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
  soc/loongson: loongson2_guts: Convert to platform remove callback returning void
  soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
  soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
  soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
  ...