- 07 Jan, 2009 12 commits
-
-
Benny Halevy authored
There's no use for nfs4_cb_null_ops's declaration in fs/nfsd/nfs4callback.c Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Signed-off-by:
-
Dean Hildebrand authored
Signed-off-by:
Dean Hildebrand <dhildeb@us.ibm.com> Signed-off-by:
-
Steve Dickson authored
When determining the fsid_type in fh_compose(), the setting of the FID via fsid= export option needs to take precedence over using the UUID device id. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Tom Tucker authored
A race between svc_revisit and svc_delete_xprt can result in deferred requests holding references on a transport that can never be recovered because dead transports are not enqueued for subsequent processing. Check for XPT_DEAD in revisit to clean up completing deferrals on a dead transport and sweep a transport's deferred queue to do the same for queued but unprocessed deferrals. Signed-off-by:
Tom Tucker <tom@opengridcomputing.com> Signed-off-by:
-
J. Bruce Fields authored
A number of nfsd operations depend on the i_mutex to cover more code than just the fsync, so the approach of 4c728ef5 "add a vfs_fsync helper" doesn't work for nfsd. Revert the parts of those patches that touch nfsd. Note: we can't, however, remove the logic from vfs_fsync that was needed only for the special case of nfsd, because a vfs_fsync(NULL,...) call can still result indirectly from a stackable filesystem that was called by nfsd. (Thanks to Christoph Hellwig for pointing this out.) Reported-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
Tom Tucker authored
The rqstp structure has a pointer to a svc_deferred_req record that is allocated when requests are deferred. This record is common to all transports and can be freed in common code. Move the kfree of the rq_deferred to the common svc_xprt_release function. This also fixes a memory leak in the RDMA transport which does not kfree the dr structure in it's version of the xpo_release_rqst callback. Signed-off-by:
-
David Howells authored
Fix a regression in NFSD's permission checking introduced by the credentials patches. There are two parts to the problem, both in nfsd_setuser(): (1) The return value of set_groups() is -ve if in error, not 0, and should be checked appropriately. 0 indicates success. (2) The UID to use for fs accesses is in new->fsuid, not new->uid (which is 0). This causes CAP_DAC_OVERRIDE to always be set, rather than being cleared if the UID is anything other than 0 after squashing. Reported-by:J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
Chuck Lever authored
Clean up: Use Bruce's preferred control flow style in make_socks(). Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
Clean up: extract common logic in NLM's make_socks() function into a helper. Signed-off-by:
-
J. Bruce Fields authored
Since nfsv4 allows LOCKT without an open, but the ->lock() method is a file method, we fake up a struct file in the nfsv4 code with just the fields we need initialized. But we forgot to initialize the file operations, with the result that LOCKT never results in a call to the filesystem's ->lock() method (if it exists). We could just add that one more initialization. But this hack of faking up a struct file with only some fields initialized seems the kind of thing that might cause more problems in the future. We should either do an open and get a real struct file, or make lock-testing an inode (not a file) method. This patch does the former. Reported-by:
Marc Eshel <eshel@almaden.ibm.com> Tested-by:
-
- 06 Jan, 2009 28 commits
-
-
Trond Myklebust authored
We want to ensure that connected sockets close down the connection when we set XPT_CLOSE, so that we don't keep it hanging while cleaning up all the stuff that is keeping a reference to the socket. Signed-off-by:
-
Chuck Lever authored
Document the NFSD sysctl interface laid out in fs/nfsd/nfsctl.c. Signed-off-by:
-
Chuck Lever authored
Clean up: Instead of open-coding 2049, use the NFS_PORT macro. Signed-off-by:
-
Chuck Lever authored
Clean up: follow kernel coding style. Signed-off-by:
-
Chuck Lever authored
Clean up: Rename recently-added failover functions to match the naming convention in fs/nfsd/nfsctl.c. Signed-off-by:
-
Chuck Lever authored
If the kernel is configured to support IPv6 and the RPC server can register services via rpcbindv4, we are all set to enable IPv6 support for lockd. Signed-off-by:
-
Chuck Lever authored
Clean up. For consistency, rewrite the IPv4 check to match the same style as the new IPv6 check. Note that ipv4_is_loopback() is somewhat broader in its interpretation of what is a loopback address than simply "127.0.0.1". Signed-off-by:
-
Chuck Lever authored
Commit b85e4676 added the nlm_privileged_requester() helper to check whether an RPC request was sent from a local privileged caller. It recognizes IPv4 privileged callers (from "127.0.0.1"), and IPv6 privileged callers (from "::1"). However, IPV6_ADDR_LOOPBACK is not set for the mapped IPv4 loopback address (::ffff:7f00:0001), so the test breaks when the kernel's RPC service is IPv6-enabled but user space is calling via the IPv4 loopback address. This is actually the most common case for IPv6- enabled RPC services on Linux. Rewrite the IPv6 check to handle the mapped IPv4 loopback address as well as a normal IPv6 loopback address. Signed-off-by:
-
Chuck Lever authored
Clean up: one last thing... relocate nsm_create() to eliminate the forward declaration and group it near the only function that actually uses it. Signed-off-by:
-
Chuck Lever authored
Clean up. Treat the nsm_use_hostnames global variable like nsm_local_state. Note that the default value of nsm_use_hostnames is still zero. Signed-off-by:
-
Chuck Lever authored
Clean up: nsm_addr_in() is no longer used, and nsm_addr() is used only in fs/lockd/mon.c, so move it there. Signed-off-by:
-
Chuck Lever authored
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty now. Remove it. Signed-off-by:
-
Chuck Lever authored
NLM provides file locking services for NFS files. Part of this service includes a second protocol, known as NSM, which is a reboot notification service. NLM uses this service to determine when to reclaim locks or enter a grace period after a client or server reboots. The NLM service (implemented by lockd in the Linux kernel) contacts the local NSM service (implemented by rpc.statd in Linux user space) via NSM protocol upcalls to register a callback when a particular remote peer reboots. To match the callback to the correct remote peer, the NLM service constructs a cookie that it passes in the request. The NSM service passes that cookie back to the NLM service when it is notified that the given remote peer has indeed rebooted. Currently on Linux, the cookie is the raw 32-bit IPv4 address of the remote peer. To support IPv6 addresses, which are larger, we could use all 16 bytes of the cookie to represent a full IPv6 address, although we still can't represent an IPv6 address with a scope ID in just 16 bytes. Instead, to avoid the need for future changes to support additional address types, we'll use a manufactured value for the cookie, and use that to find the corresponding nsm_handle struct in the kernel during the NLMPROC_SM_NOTIFY callback. This should provide complete support in the kernel's NSM implementation for IPv6 hosts, while remaining backwards compatible with older rpc.statd implementations. Note we also deal with another case where nsm_use_hostnames can change while there are outstanding notifications, possibly resulting in the loss of reboot notifications. After this patch, the priv cookie is always used to lookup rebooted hosts in the kernel. Signed-off-by:
-
Chuck Lever authored
Clean up: refactor nsm_get_handle() so it is organized the same way that nsm_reboot_lookup() is. There is an additional micro-optimization here. This change moves the "hostname & nsm_use_hostnames" test out of the list_for_each_entry() clause in nsm_get_handle(), since it is loop-invariant. Signed-off-by:
-
Chuck Lever authored
Clean up. Refactor the creation of nsm_handles into a helper. Fields are initialized in increasing address order to make efficient use of CPU caches. Signed-off-by:
-
Chuck Lever authored
Clean up: nsm_find() now has only one caller, and that caller unconditionally sets the @create argument. Thus the @create argument is no longer needed. Since nsm_find() now has a more specific purpose, pick a more appropriate name for it. Signed-off-by:
-
Chuck Lever authored
Invoke the newly introduced nsm_reboot_lookup() function in nlm_host_rebooted() instead of nsm_find(). This introduces just one behavioral change: debugging messages produced during reboot notification will now appear when the NLMDBG_MONITOR flag is set, but not when the NLMDBG_HOSTCACHE flag is set. Signed-off-by:
-
Chuck Lever authored
Introduce a new API to fs/lockd/mon.c that allows nlm_host_rebooted() to lookup up nsm_handles via the contents of an nlm_reboot struct. The new function is equivalent to calling nsm_find() with @create set to zero, but it takes a struct nlm_reboot instead of separate arguments. Signed-off-by:
-
Chuck Lever authored
The NLM XDR decoders for the NLMPROC_SM_NOTIFY procedure should treat their "priv" argument truly as an opaque, as defined by the protocol, and let the upper layers figure out what is in it. This will make it easier to modify the contents and interpretation of the "priv" argument, and keep knowledge about what's in "priv" local to fs/lockd/mon.c. For now, the NLM and NSM implementations should behave exactly as they did before. The formation of the address of the rebooted host in nlm_host_rebooted() may look a little strange, but it is the inverse of how nsm_init_private() forms the private cookie. Plus, it's going away soon anyway. Signed-off-by:
-
Chuck Lever authored
Pass the nlm_reboot data structure directly from the NLMPROC_SM_NOTIFY XDR decoders to nlm_host_rebooted(). This eliminates some packing and unpacking of the NLMPROC_SM_NOTIFY results, and prepares for passing these results, including the "priv" cookie, directly to a lookup routine in fs/lockd/mon.c. This patch changes code organization but should not cause any behavioral change. Signed-off-by:
-
Chuck Lever authored
Pass the new "priv" cookie to NSMPROC_MON's XDR encoder, instead of creating the "priv" argument in the encoder at call time. This patch should not cause a behavioral change: the contents of the cookie remain the same for the time being. Signed-off-by:
-
Chuck Lever authored
Introduce a new data type, used by both the in-kernel NLM and NSM implementations, that is used to manage the opaque "priv" argument for the NSMPROC_MON and NLMPROC_SM_NOTIFY calls. Construct the "priv" cookie when the nsm_handle is created. The nsm_init_private() function may look a little strange, but it is roughly equivalent to how the XDR encoder formed the "priv" argument. It's going to go away soon. Signed-off-by:
-
Chuck Lever authored
The nsm_release() function should never be called with a NULL handle point. If it is, that's a bug. Signed-off-by:
-
Chuck Lever authored
The nsm_find() function should never be called with a NULL IP address pointer. If it is, that's a bug. Signed-off-by:
-
Chuck Lever authored
Introduce some dprintk() calls in fs/lockd/mon.c that are enabled by the NLMDBG_MONITOR flag. These report when we find, create, and release nsm_handles. Signed-off-by:
-
Chuck Lever authored
The nsm_find() function sets up fresh nsm_handle entries. This is where we will store the "priv" cookie used to lookup nsm_handles during reboot recovery. The cookie will be constructed when nsm_find() creates a new nsm_handle. As much as possible, I would like to keep everything that handles a "priv" cookie in fs/lockd/mon.c so that all the smarts are in one source file. That organization should make it pretty simple to see how all this works. To me, it makes more sense than the current arrangement to keep nsm_find() with nsm_monitor() and nsm_unmonitor(). So, start reorganizing by moving nsm_find() into fs/lockd/mon.c. The nsm_release() function comes along too, since it shares the nsm_lock global variable. Signed-off-by:
-
Chuck Lever authored
Introduce xdr_stream-based XDR encoder and decoder functions, which are more careful about preventing RPC buffer overflows. Signed-off-by:
-
Chuck Lever authored
Clean up: Move the RPC program and procedure numbers for NSM into the one source file that needs them: fs/lockd/mon.c. And, as with NLM, NFS, and rpcbind calls, use NSMPROC_FOO instead of SM_FOO for NSM procedure numbers. Finally, make a couple of comments more precise: what is referred to here as SM_NOTIFY is really the NLM (lockd) NLMPROC_SM_NOTIFY downcall, not NSMPROC_NOTIFY. Signed-off-by:
-
