- 23 Aug, 2019 11 commits
-
-
Rob Herring authored
Lockdep reports a circular locking dependency with pages_lock taken in the shrinker callback. The deadlock can't actually happen with current users at least as a BO will never be purgeable when pages_lock is held. To be safe, let's use mutex_trylock() instead and bail if a BO is locked already. WARNING: possible circular locking dependency detected 5.3.0-rc1+ #100 Tainted: G L ------------------------------------------------------ kswapd0/171 is trying to acquire lock: 000000009b9823fd (&shmem->pages_lock){+.+.}, at: drm_gem_shmem_purge+0x20/0x40 but task is already holding lock: 00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.18+0x34/0x40 fs_reclaim_acquire+0x20/0x28 __kmalloc_node+0x6c/0x4c0 kvmalloc_node+0x38/0xa8 drm_gem_get_pages+0x80/0x1d0 drm_gem_shmem_get_pages+0x58/0xa0 drm_gem_shmem_get_pages_sgt+0x48/0xd0 panfrost_mmu_map+0x38/0xf8 [panfrost] panfrost_gem_open+0xc0/0xe8 [panfrost] drm_gem_handle_create_tail+0xe8/0x198 drm_gem_handle_create+0x3c/0x50 panfrost_gem_create_with_handle+0x70/0xa0 [panfrost] panfrost_ioctl_create_bo+0x48/0x80 [panfrost] drm_ioctl_kernel+0xb8/0x110 drm_ioctl+0x244/0x3f0 do_vfs_ioctl+0xbc/0x910 ksys_ioctl+0x78/0xa8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x90/0x168 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc -> #0 (&shmem->pages_lock){+.+.}: __lock_acquire+0xa2c/0x1d70 lock_acquire+0xdc/0x228 __mutex_lock+0x8c/0x800 mutex_lock_nested+0x1c/0x28 drm_gem_shmem_purge+0x20/0x40 panfrost_gem_shrinker_scan+0xc0/0x180 [panfrost] do_shrink_slab+0x208/0x500 shrink_slab+0x10c/0x2c0 shrink_node+0x28c/0x4d8 balance_pgdat+0x2c8/0x570 kswapd+0x22c/0x638 kthread+0x128/0x130 ret_from_fork+0x10/0x18 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&shmem->pages_lock); lock(fs_reclaim); lock(&shmem->pages_lock); *** DEADLOCK *** 3 locks held by kswapd0/171: #0: 00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40 #1: 00000000ceb37808 (shrinker_rwsem){++++}, at: shrink_slab+0xbc/0x2c0 #2: 00000000f31efa81 (&pfdev->shrinker_lock){+.+.}, at: panfrost_gem_shrinker_scan+0x34/0x180 [panfrost] Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:Rob Herring <robh@kernel.org> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823021216.5862-6-robh@kernel.org
-
Rob Herring authored
Calling dma_unmap_sg() in drm_gem_shmem_free_object() is too late if the backing pages have already been released by the shrinker. The result is the following abort: Unable to handle kernel paging request at virtual address ffff8000098ed000 Mem abort info: ESR = 0x96000147 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000147 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000002f51000 [ffff8000098ed000] pgd=00000000401f8003, pud=00000000401f7003, pmd=00000000401b1003, pte=00e80000098ed712 Internal error: Oops: 96000147 [#1] SMP Modules linked in: panfrost gpu_sched CPU: 5 PID: 902 Comm: gnome-shell Not tainted 5.3.0-rc1+ #95 Hardware name: 96boards Rock960 (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : __dma_inv_area+0x40/0x58 lr : arch_sync_dma_for_cpu+0x28/0x30 sp : ffff00001321ba30 x29: ffff00001321ba30 x28: ffff00001321bd08 x27: 0000000000000000 x26: 0000000000000009 x25: 0000ffffc1f86170 x24: 0000000000000000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000021000 x20: ffff80003bb2d810 x19: 00000000098ed000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800023fd9480 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 00000000fffb9fff x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800023fd9c18 x7 : 0000000000000000 x6 : 00000000ffffffff x5 : 0000000000000000 x4 : 0000000000021000 Purging 5693440 bytes x3 : 000000000000003f x2 : 0000000000000040 x1 : ffff80000990e000 x0 : ffff8000098ed000 Call trace: __dma_inv_area+0x40/0x58 dma_direct_sync_single_for_cpu+0x7c/0x80 dma_direct_unmap_page+0x80/0x88 dma_direct_unmap_sg+0x54/0x80 drm_gem_shmem_free_object+0xfc/0x108 panfrost_gem_free_object+0x118/0x128 [panfrost] drm_gem_object_free+0x18/0x90 drm_gem_object_put_unlocked+0x58/0x80 drm_gem_object_handle_put_unlocked+0x64/0xb0 drm_gem_object_release_handle+0x70/0x98 drm_gem_handle_delete+0x64/0xb0 drm_gem_close_ioctl+0x28/0x38 drm_ioctl_kernel+0xb8/0x110 drm_ioctl+0x244/0x3f0 do_vfs_ioctl+0xbc/0x910 ksys_ioctl+0x78/0xa8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x88/0x150 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Code: 8a230000 54000060 d50b7e20 14000002 (d5087620) Fixes: 17acb9f3 ("drm/shmem: Add madvise state and purge helpers") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Rob Herring authored
Calls to panfrost_device_fini() access the h/w, but we already done a pm_runtime_put_sync_autosuspend() beforehand. This only works if the autosuspend delay is long enough. A 0ms delay will hang the system when removing the device. Fix this by moving the pm_runtime_put_sync_suspend() after the panfrost_device_fini() call. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Rob Herring authored
Add Steven Price and Alyssa Rosenzweig as reviewers as they have been the primary reviewers already. Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by:
-
Steven Price authored
When modifying panfrost_devfreq_target() to support a device without a regulator defined I missed the check on the error path. Let's add it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: e21dd290 ("drm/panfrost: Enable devfreq to work without regulator") Signed-off-by:
-
Gerd Hoffmann authored
No need for a home-grown version, the generic helper should work just fine. It also handles vgacon removal these days, see commit 1c74ca7a ("drm/fb-helper: call vga_remove_vgacon automatically."), so that can be removed too. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190822090645.25410-4-kraxel@redhat.com
-
Gerd Hoffmann authored
Not needed any more for remove_conflicting_pci_framebuffers calls. Signed-off-by:
-
Gerd Hoffmann authored
Since commit b0e999c9 ("fbdev: list all pci memory bars as conflicting apertures") the parameter was used for some sanity checks only, to make sure we detect any issues with the new approach to just list all memory bars as apertures. No issues turned up so far, so continue to cleanup: Drop the res_id parameter, drop the sanity checks. Also downgrade the logging from "info" level to "debug" level and update documentation. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613115749.GC26335@kroah.comReviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704023557.4551-1-huangfq.daxian@gmail.com
-
Jean-Jacques Hiblot authored
Add the following properties for planes: * alpha * pixel blend mode. Only "Pre-multiplied" and "Coverage" are supported Signed-off-by:
Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by:
-
Rob Herring authored
We can't hold the mm_lock spinlock as panfrost_mmu_map() can sleep: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 in_atomic(): 1, irqs_disabled(): 0, pid: 974, name: glmark2-es2-drm 1 lock held by glmark2-es2-drm/974: CPU: 5 PID: 974 Comm: glmark2-es2-drm Tainted: G W L 5.3.0-rc1+ #94 Hardware name: 96boards Rock960 (DT) Call trace: dump_backtrace+0x0/0x130 show_stack+0x14/0x20 dump_stack+0xc4/0x10c ___might_sleep+0x158/0x228 __might_sleep+0x50/0x88 __mutex_lock+0x58/0x800 mutex_lock_interruptible_nested+0x1c/0x28 drm_gem_shmem_get_pages+0x24/0xa0 drm_gem_shmem_get_pages_sgt+0x48/0xd0 panfrost_mmu_map+0x38/0xf8 [panfrost] panfrost_gem_open+0xc0/0xd8 [panfrost] drm_gem_handle_create_tail+0xe8/0x198 drm_gem_handle_create+0x3c/0x50 panfrost_gem_create_with_handle+0x70/0xa0 [panfrost] panfrost_ioctl_create_bo+0x48/0x80 [panfrost] drm_ioctl_kernel+0xb8/0x110 drm_ioctl+0x244/0x3f0 do_vfs_ioctl+0xbc/0x910 ksys_ioctl+0x78/0xa8 __arm64_sys_ioctl+0x1c/0x28 el0_svc_common.constprop.0+0x90/0x168 el0_svc_handler+0x28/0x78 el0_svc+0x8/0xc Fixes: a5efb4c9 ("drm/panfrost: Restructure the GEM object creation") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
- 22 Aug, 2019 2 commits
-
-
Julien Masson authored
This patch introduce new enum which contains all VPU family (GXBB, GXL, GXM and G12A). This enum is used to detect the VPU compatible with the device. We only need to set .data to the corresponding enum in the device table, no need to check .compatible string anymore. Signed-off-by:
Julien Masson <jmasson@baylibre.com> Tested-by:
-
Jani Nikula authored
The module is drm_kms_helper, not drm_kms_firmware. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204549Reported-by:
Göran Uddeborg <goeran@uddeborg.se> Fixes: ac6c35a4 ("drm: add backwards compatibility support for drm_kms_helper.edid_firmware") Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821094312.5514-1-jani.nikula@intel.com
-
- 21 Aug, 2019 26 commits
-
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch renames ade_data to kirin_drm_private, and moves crtc_init and plane_init to kirin drm drv too. Now that they are generic the functions can be shared between the kirin620 and (to be added later) kirin960 specific support code. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
Xinliang Liu <z.liuxinliang@hisilicon.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Xu YiPing <xuyiping@hisilicon.com> [jstultz: Reworded commit message] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the code via a passed in driver_data pointer, rather than hardcoding them via ade_driver_data variable. This will allow those funcitons to be later moved to the generic kirin_drm_drv.c using alternative driver_data structures that support other hardware. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the alloc/clean_hw_ctx functions to be called via driver_data specific funciton pointers. This will allow the ade_drm_init to later be made generic and moved to kirin_drm_drv.c Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the driver_data value to not be a global variable. Instead the driver_data value is accessed via the of_device_get_match_data() when needed. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch changes the dev->driver_data to point to a drm_device, not ade_data. Thus we set the driver data to drm device after alloc. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch renames ade_crtc/plane_init kirin_plane/crtc_init, as they will later be moved to kirin drm drv and shared with the kirin960 hardware support. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch adds a flag to the device specific driver data so that we can conditionally register the connectors at init. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves the drm_driver structure to be under device specific driver data. This will allow us to more easily add support for kirin960 hardware with later patches. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves the max_width and max_height values used in kirin_drm_mode_config_inita to hardware specific driver data. This will make it easier to add support for new devices via a new kirin_drm_data structure. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves the number of planes and the primary plane value to the kirin_drm_data structure This will make it easier to add support for new devices via a new kirin_drm_data structure. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves the mode config initialization values into the kirin_drm_data structure. This will make it easier to add support for new devices via a new kirin_drm_data structure. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves the channel format arrays into the kirin_drm_data structure. This will make it easier to add support for new devices via a new kirin_drm_data structure. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves the crtc and plane funcs/helper_funcs to the struct kirin_drm_data. This will make it easier to add support for new devices via a new kirin_drm_data structure. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch renames the struct kirin_dc_ops to struct kirin_drm_data and cleans up the related variable names. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch moves some shared structures and helpers to the common kirin_drm_drv.h These structures will later used by both kirin620 and future kirin960 driver Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
John Stultz authored
The workqueue used to reset the display when we hit an LDI underflow error is ADE specific, so since this patch series works to make the kirin_crtc structure more generic, move the workqueue to the ade_hw_ctx structure instead. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch modifies the initialization routines so the devm_request_irq() function is called as part of the allocation function. This will be needed in the future when we will have different allocation functions to allocate hardware specific hw_ctx structures, which will setup the vblank irq differently. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch modifies the initialization function to dynamically allocate the ade_hw_ctx structure previously kept as part of struct ade_data. This is done so that later we can have the hw_ctx point to hardware revision specific ctx structures. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch renames the struct ade_crtc to kirin_crtc. The struct kirin_crtc will later used by both kirin620 and future kirin960 driver, and will be moved to a common kirin_drm_drv.h in a future patch Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch renames the struct ade_plane to kirin_plane. The struct kirin_plane will later used by both kirin620 and future kirin960 driver, and will be moved to a common kirin_drm_drv.h in a future patch Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
As part of refactoring the kirin driver to better support different hardware revisions, this patch removes the out_format field in the struct ade_crtc, which was only ever set to LDI_OUT_RGB_888. Thus this patch removes the field and instead directly uses LDI_OUT_RGB_888. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Xu YiPing authored
In a few functions, we pass in a struct ade_crtc, which we only use to get to the underlying struct ade_hw_ctx. Thus this patch refactors the functions to just take the struct ade_hw_ctx directly. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
John Stultz authored
The 'return 0' in kirin_drm_platform_probe() is unreachable code, so remove it. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
John Stultz authored
The CONFIG_HISI_KIRIN_DW_DSI option is only used w/ kirin driver, so cut out the middleman and condense the config logic down. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Da Lv authored
The original HiKey (620) board has had a long running issue where when using a 1080p montior, the display would occasionally blink and come come back with a horizontal offset (usually also shifting the colors, depending on the value of the offset%4). After lots of analysis by HiSi developers, they found the issue was due to when running at 1080p, it was possible to hit the device memory bandwidth limits, which could cause the DSI signal to get out of sync. Unfortunately the DSI logic doesn't have the ability to automatically recover from this situation, but we can get a an LDI underflow interrupt when it happens. To then correct the issue, when we get an LDI underflow irq, we we can simply suspend and resume the display, which resets the hardware. Thus, this patch enables the ldi underflow interrupt, and initializes a workqueue that is used to suspend/resume the display to recover. Then when the irq occurs we clear it and schedule the workqueue to reset display engine. Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by:
Da Lv <lvda3@hisilicon.com> Signed-off-by:
Yidong Lin <linyidong@huawei.com> [jstultz: Reworded the commit message, checkpatch cleanups] Signed-off-by:
-
Thierry Reding authored
TTM assumes that drivers initialize the embedded GEM object before calling the ttm_bo_init() function. This is not currently the case in the Nouveau driver. Fix this by splitting up nouveau_bo_new() into nouveau_bo_alloc() and nouveau_bo_init() so that the GEM can be initialized before TTM BO initialization when necessary. Fixes: b96f3e7c ("drm/ttm: use gem vma_node") Acked-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190814093524.GA31345@ulmo
-
- 20 Aug, 2019 1 commit
-
-
Nickey Yang authored
This patch update describe panel/port links, including unit addresses in documentation of device tree bindings for the rockchip DSI controller based on the Synopsys DesignWare MIPI DSI host controller. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-5-heiko@sntech.de
-
