- 07 Dec, 2006 40 commits
-
-
Zachary Amsden authored
Make parameter names match function argument names for the yet to be defined pte_update_defer accessor. Signed-off-by:
Zachary Amsden <zach@vmware.com> Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by:
Andrew Morton <akpm@osdl.org>
-
Zachary Amsden authored
Move header includes for the nopud / nopmd types to the location of the actual pte / pgd type definitions. This allows generic 4-level page type code to be written before the split 2/3 level page table headers are included. Signed-off-by:
-
Rusty Russell authored
BIOS ROM areas may not be mapped into the guest address space, so be careful when touching those addresses to make sure they appear to be mapped. [akpm@osdl.org: fix unused var warning] AK: Changed __get_user to probe_kernel_address Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rusty Russell authored
Add the three bare TLB accessor functions to paravirt-ops. Most amusingly, flush_tlb is redefined on SMP, so I can't call the paravirt op flush_tlb. Instead, I chose to indicate the actual flush type, kernel (global) vs. user (non-global). Global in this sense means using the global bit in the page table entry, which makes TLB entries persistent across CR3 reloads, not global as in the SMP sense of invoking remote shootdowns, so the term is confusingly overloaded. AK: folded in fix from Zach for PAE compilation Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Rusty Russell authored
Add APIC accessors to paravirt-ops. Unfortunately, we need two write functions, as some older broken hardware requires workarounds for Pentium APIC errata - this is the purpose of apic_write_atomic. AK: replaced __inline with inline Signed-off-by:
-
Rusty Russell authored
Two legacy power management modes are much easier to just explicitly disable when running in paravirtualized mode - neither APM nor PnP is still relevant. The status of ACPI is still debatable, and noacpi is still a common enough boot parameter that it is not necessary to explicitly disable ACPI. Signed-off-by:
-
Andi Kleen authored
They don't work together and this way even glibc still works. Signed-off-by: -
Rusty Russell authored
Allow selected bug checks to be skipped by paravirt kernels. The two most important are the F00F workaround (which is either done by the hypervisor, or not required), and the 'hlt' instruction check, which can break under some hypervisors. Signed-off-by:
-
Rusty Russell authored
1) Each hypervisor writes a probe function to detect whether we are running under that hypervisor. paravirt_probe() registers this function. 2) If vmlinux is booted with ring != 0, we call all the probe functions (with registers except %esp intact) in link order: the winner will not return. Signed-off-by:
-
Rusty Russell authored
Both lhype and Xen want to call the core of the x86 cpu detect code before calling start_kernel. (extracted from larger patch) AK: folded in start_kernel header patch Signed-off-by:
-
Rusty Russell authored
It turns out that the most called ops, by several orders of magnitude, are the interrupt manipulation ops. These are obvious candidates for patching, so mark them up and create infrastructure for it. The method used is that the ops structure has a patch function, which is called for each place which needs to be patched: this returns a number of instructions (the rest are NOP-padded). Usually we can spare a register (%eax) for the binary patched code to use, but in a couple of critical places in entry.S we can't: we make the clobbers explicit at the call site, and manually clobber the allowed registers in debug mode as an extra check. And: Don't abuse CONFIG_DEBUG_KERNEL, add CONFIG_DEBUG_PARAVIRT. And: AK: Fix warnings in x86-64 alternative.c build And: AK: Fix compilation with defconfig And: ^From: Andrew Morton <akpm@osdl.org> Some binutlises still like to emit references to __stop_parainstructions and __start_parainstructions. And: AK: Fix warnings about unused variables when PARAVIRT is disabled. Signed-off-by:
-
Rusty Russell authored
Create a paravirt.h header for all the critical operations which need to be replaced with hypervisor calls, and include that instead of defining native operations, when CONFIG_PARAVIRT. This patch does the dumbest possible replacement of paravirtualized instructions: calls through a "paravirt_ops" structure. Currently these are function implementations of native hardware: hypervisors will override the ops structure with their own variants. All the pv-ops functions are declared "fastcall" so that a specific register-based ABI is used, to make inlining assember easier. And: +From: Andy Whitcroft <apw@shadowen.org> The paravirt ops introduce a 'weak' attribute onto memory_setup(). Code ordering leads to the following warnings on x86: arch/i386/kernel/setup.c:651: warning: weak declaration of `memory_setup' after first use results in unspecified behavior Move memory_setup() to avoid this. Signed-off-by:Andy Whitcroft <apw@shadowen.org>
-
Nicolas Kaiser authored
Fix double #includes in arch/i386 Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
David Rientjes authored
Substitutes allocate_pgdat virtual address lookup with pfn_to_kaddr macro. Signed-off-by:
David Rientjes <rientjes@cs.washington.edu> Signed-off-by:
-
Andi Kleen authored
It's two big and used by two callers. Calls should be cheap enough anyways. Signed-off-by: -
Chuck Ebbert authored
IOPL is implicitly saved and restored on task switch, so explicit check is no longer needed. Signed-off-by:
Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Andi Kleen authored
Interrupt could happen between setting the IO-APIC entry and setting its interrupt data. Pointed out by Linus. Signed-off-by: -
Andi Kleen authored
Interrupt could happen between setting the IO-APIC entry and setting its interrupt data. Pointed out by Linus. Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
For both i386 and x86_64, copy from arch/$ARCH/lib/delay.c comments about the used magic constants, plus a few other niceties. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Port two patches from i386 to x86_64 delay.c to make sure all rounding is done upward instead of downward. There is no sign in commit messages that the mismatch was done on purpose, and "delay() guarantees sleeping at least for the specified time" is still a valid rule IMHO. The original x86 patches are both from pre-GIT era, i.e.: "[PATCH] round up in __udelay()" in commit 54c7e1f5cc6771ff644d7bc21a2b829308bd126f "[PATCH] add 1 in __const_udelay()" in commit 42c77a9801b8877d8b90f65f75db758822a0bccc (both commits are from converted BK repository to x86_64). AK: fixed gcc warning linux/arch/x86_64/lib/delay.c:43: warning: suggest parentheses around + or - inside shift (did this actually work?) Signed-off-by:
-
Muli Ben-Yehuda authored
This patch makes it possible to compile Calgary in but not use it by default. In this mode, use 'iommu=calgary' to activate it. Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Muli Ben-Yehuda authored
This patch cleans up the previous "Use BIOS supplied BBAR information" patch. Mostly stylistic clenaups, but also check for ioremap failure when we ioremap the BBAR rather than when trying to use it. Signed-off-by:
Laurent Vivier <Laurent.Vivier@bull.net>
-
Laurent Vivier authored
Find the BBAR register address of each Calgary using the "Extended BIOS Data Area" rather than calculating it ourselves. Also get the bus topology (what PHB each bus is on) from Calgary rather than calculating it ourselves. This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=7407. Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
bibo,mao authored
This patch moves e820 memory map print and memmap boot param parsing function from setup.c to e820.c, also adds limit_regions and print_memory_map declaration in header file. Signed-off-by:
bibo,mao <bibo.mao@intel.com> Signed-off-by:
-
bibo,mao authored
This patch moves e820/efi memmap table walking function from setup.c to e820.c, also this patch adds extern declaration in header file. Signed-off-by:
-
bibo,mao authored
Move more code from setup.c into e820.c Signed-off-by:
-
bibo,mao authored
This patch moves bios e820 map sanitize and copy function from setup.c to e820.c Signed-off-by:
-
bibo,mao authored
This patch creates new file named e820.c to hanle standard io/mem resources, moving request_standard_resources function from setup.c to e820.c. Also this patch modifies Makfile to compile file e820.c. Signed-off-by:
-
Albert Cahalan authored
The recent change to make x86_64 support i386 binaries compiled with -mregparm=3 only covered signal handlers without SA_SIGINFO. (the 3-arg "real-time" ones) To be compatible with i386, both types should be supported. Signed-off-by:
Albert Cahalan <acahalan@gmail.com> Signed-off-by:
-
Andi Kleen authored
Instead of adding all kinds of more quirks try various timer routing variants in check_timer. In particular this tries to handle quirks from: - Nvidia NF2-4 reference BIOS: wrong timer override - Asus: Wrong timer override but no HPET table - ATI: require timer disabled in 8259 - Some boards: require timer enabled in 8259 We just try many of the the known variants in the hopefully right order in check_timer. Trying pin 0/2 on Nvidia suggested by Tim Hockin. TBD Experimental. Needs a lot of testing Signed-off-by: -
Andi Kleen authored
Makes the intention of the code cleaner to read and avoids a potential deadlock on mmap_sem. Also change the types of the arguments to not include __user because they're really not user addresses. Signed-off-by: -
Andi Kleen authored
Instead of open coded __get_user Signed-off-by: -
Andi Kleen authored
Caller of probe_kernel_address shouldn't need to know that pka is internally implemented with __get_user. So move the __user cast into pka. Signed-off-by: -
Yinghai Lu authored
Clear the irq releated entries in irq_vector, irq_domain and vector_irq instead of clearing irq_vector only. So when new irq is created, it could reuse that vector. (actually is the second loop scanning from FIRST_DEVICE_VECTOR+8). This could avoid the vectors are used up with enough module inserting and removing Cc: Eric W. Biedierman <ebiederm@xmission.com> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-By:
Yinghai Lu <yinghai.lu@amd.com> Signed-off-by:
-
Andi Kleen authored
CLFLUSH is a lot faster than WBINVD so try to use that. Signed-off-by: -
Andi Kleen authored
Also report it in /proc/cpuinfo similar to x86-64. Needed for followon patch Signed-off-by: -
Andi Kleen authored
CLFLUSH is a lot faster than WBINVD so avoid the later if at all possible. Always pass the complete list of pages to other CPUs to cut down the number of IPIs. Minor other cleanup and sync with i386 version. Signed-off-by: -
Joe Korty authored
The entry.S code at work_notifysig is surely wrong. It drops into unrelated code if the branch to work_notifysig_v86 is taken, and CONFIG_VM86=n. [PATCH] Make vm86 support optional tree 9b5daef5280800a0006343a17f63072658d91a1d pushed to git Jan 8, 2006, and first appears in 2.6.16 The 'fix' here is to also compile out the vm86 test & branch when CONFIG_VM86=n. Signed-off-by:
Joe Korty <joe.korty@ccur.com> Signed-off-by:
-
Avi Kivity authored
Code that wants to use struct desc_struct cannot do so on i386 because desc.h contains other code that will only compile on x86_64. So extract the structure definitions into a asm-x86_64/desc_defs.h. Signed-off-by:
Avi Kivity <avi@qumranet.com> Signed-off-by:
-
