- 16 Aug, 2018 2 commits
-
-
Paolo Valente authored
When the next child entity to serve changes for a given parent entity, the budget of that parent entity must be updated accordingly. Unfortunately, this update is not performed, by mistake, for the entities that happen to switch from having no child entity to serve, to having one child entity to serve. Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Paolo Valente authored
The received-service counter needs to be equal to 0 when an entity is set in service. Unfortunately, commit "block, bfq: fix service being wrongly set to zero in case of preemption" mistakenly removed the resetting of this counter for the parent entities of the bfq_queue being set in service. This commit fixes this issue by resetting service for parent entities, directly on the expiration of the in-service bfq_queue. Fixes: 9fae8dd5 ("block, bfq: fix service being wrongly set to zero in case of preemption") Signed-off-by:
-
- 14 Aug, 2018 2 commits
-
-
Ming Lei authored
On wbt invariant is that if one IO is tracked via WBT_TRACKED, rqw->inflight should be updated for tracking this IO. But commit c1c80384 ("block: remove external dependency on wbt_flags") forgets to remove the early handling of !rwb_enabled(rwb) inside wbt_wait(), then the inflight counter may not be increased in wbt_wait(), but decreased in wbt_done() for this kind of IO, so this counter may become negative, then wbt_wait() may wait forever. This patch fixes the report in the following link: https://marc.info/?l=linux-block&m=153221542021033&w=2 Fixes: c1c80384 ("block: remove external dependency on wbt_flags") Cc: Josef Bacik <jbacik@fb.com> Reported-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Jens Axboe authored
Don't warn for a flush issued to a read-only device. It's not strictly a writable command, as it doesn't change any on-media data by itself. Reported-by:
Stefan Agner <stefan@agner.ch> Fixes: 721c7fc7 ("block: fail op_is_write() requests to read-only partitions") Signed-off-by:
-
- 11 Aug, 2018 18 commits
-
-
Coly Li authored
Checkpatch.pl warns there are 2 locations of smp_mb() and smp_wmb() without code comment. This patch adds the missing code comments for these memory barrier calls. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
-
Coly Li authored
This is warned by checkpatch.pl, this patch removes the extra space. Signed-off-by:
-
Coly Li authored
The SPDX header is missing fro closure.c, super.c and util.c, this patch adds SPDX header for GPL-2.0 into these files. Signed-off-by:
-
Coly Li authored
This is not a preferred style to place open brace '{' at the end of function definition, checkpatch.pl reports error for such coding style. This patch moves them into the start of the next new line. Signed-off-by: -
Coly Li authored
This patch declares char * array with const prefix in sysfs.c, which is suggested by checkpatch.pl. Signed-off-by:
-
Coly Li authored
This patch fixes 3 style issues warned by checkpatch.pl, - Comment lines are not aligned - Comments use "/*" on subsequent lines - Comment lines use a trailing "*/" Signed-off-by:
-
Coly Li authored
kmem_cache_destroy() is safe for NULL pointer as input, the NULL pointer checking is unncessary. This patch just removes the NULL pointer checking to make code simpler. Signed-off-by:
-
Coly Li authored
Current bcache Kconfig uses '---help---' as header of help information, for now 'help' is prefered. This patch fixes this style by replacing '---help---' by 'help' in bcache Kconfig file. Signed-off-by:
-
Coly Li authored
This patch fixes typo 'succesfully' to correct 'successfully', which is suggested by checkpatch.pl. Signed-off-by:
-
Coly Li authored
'%pF' and '%pf' are deprecated vsprintf pointer extensions, this patch replace them by '%pS', which is suggested by checkpatch.pl. Signed-off-by:
-
Coly Li authored
bch_btree_insert_check_key() has unaligned indent, or indent by blank characters. This patch makes the indent aligned and replace blank by tabs. Signed-off-by:
-
Coly Li authored
There are still many places in bcache use printk to display kernel message, which are suggested to be preplaced by pr_*() routines like pr_err(), pr_info(), or pr_notice(). This patch replaces all printk() with a proper pr_*() routine for bcache code. Signed-off-by:
-
Coly Li authored
Symbolic permission names are used in bcache, for now octal permission numbers are encouraged to use for readability. This patch replaces all symbolic permissions by octal permission numbers. Signed-off-by:
-
Coly Li authored
This patch fixes the lines over 80 characters into more lines, to minimize warnings by checkpatch.pl. There are still some lines exceed 80 characters, but it is better to be a single line and I don't change them. Signed-off-by:
-
Coly Li authored
There are many function definitions do not have identifier argument names, scripts/checkpatch.pl complains warnings like this, WARNING: function definition argument 'struct bcache_device *' should also have an identifier name #16735: FILE: writeback.h:120: +void bch_sectors_dirty_init(struct bcache_device *); This patch adds identifier argument names to all bcache function definitions to fix such warnings. Signed-off-by:
-
Coly Li authored
Signed-off-by:
-
Coly Li authored
This patch fixes warning reported by checkpatch.pl by replacing 'unsigned' with 'unsigned int'. Signed-off-by:
-
Bart Van Assche authored
For legacy queues the only call of blkg_root_lookup() happens after bypass mode has been enabled. Since blkg_lookup() returns NULL for queues in bypass mode, modify the blkg_root_lookup() such that it no longer depends on bypass mode. Rename the function into blk_queue_root_blkg() as suggested by Tejun. Suggested-by:
Tejun Heo <tj@kernel.org> Fixes: 6bad9b21 ("blkcg: Introduce blkg_root_lookup()") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 10 Aug, 2018 1 commit
-
-
Coly Li authored
Commit ea8c5356 ("bcache: set max writeback rate when I/O request is idle") changes struct bch_ratelimit member rate from uint32_t to atomic_long_t and uses atomic_long_set() in drivers/md/bcache/sysfs.c to set new writeback rate, after the input is converted from memory buf to long int by sysfs_strtoul_clamp(). The above change has a problem because there is an implicit return inside sysfs_strtoul_clamp() so the following atomic_long_set() won't be called. This error is detected by 0day system with following snipped smatch warnings: drivers/md/bcache/sysfs.c:271 __cached_dev_store() error: uninitialized symbol 'v'. 270 sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @271 atomic_long_set(&dc->writeback_rate.rate, v); This patch fixes the above error by using strtoul_safe_clamp() to convert the input buffer into a long int type result. Fixes: ea8c5356 ("bcache: set max writeback rate when I/O request is idle") Cc: Kai Krakow <kai@kaishome.de> Cc: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by:
-
- 09 Aug, 2018 17 commits
-
-
Jens Axboe authored
sparse complains: drivers/block/null_blk_main.c:816:24: sparse: context imbalance in 'null_insert_page' - unexpected unlock Fix it by adding the necessary annotations to the function. Signed-off-by: -
Liu Bo authored
When an application's iops has exceeded its cgroup's iops limit, surely it is throttled and kernel will set a timer for dispatching, thus IO latency includes the delay. However, the dispatch delay which is calculated by the limit and the elapsed jiffies is suboptimal. As the dispatch delay is only calculated once the application's iops is (iops limit + 1), it doesn't need to wait any longer than the remaining time of the current slice. The difference can be proved by the following fio job and cgroup iops setting, ----- $ echo 4 > /mnt/config/nullb/disk1/mbps # limit nullb's bandwidth to 4MB/s for testing. $ echo "253:1 riops=100 rbps=max" > /sys/fs/cgroup/unified/cg1/io.max $ cat r2.job [global] name=fio-rand-read filename=/dev/nullb1 rw=randread bs=4k direct=1 numjobs=1 time_based=1 runtime=60 group_reporting=1 [file1] size=4G ioengine=libaio iodepth=1 rate_iops=50000 norandommap=1 thinktime=4ms ----- wo patch: file1: (g=0): rw=randread, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=1 fio-3.7-66-gedfc Starting 1 process read: IOPS=99, BW=400KiB/s (410kB/s)(23.4MiB/60001msec) slat (usec): min=10, max=336, avg=27.71, stdev=17.82 clat (usec): min=2, max=28887, avg=5929.81, stdev=7374.29 lat (usec): min=24, max=28901, avg=5958.73, stdev=7366.22 clat percentiles (usec): | 1.00th=[ 4], 5.00th=[ 4], 10.00th=[ 4], 20.00th=[ 4], | 30.00th=[ 4], 40.00th=[ 4], 50.00th=[ 6], 60.00th=[11731], | 70.00th=[11863], 80.00th=[11994], 90.00th=[12911], 95.00th=[22676], | 99.00th=[23725], 99.50th=[23987], 99.90th=[23987], 99.95th=[25035], | 99.99th=[28967] w/ patch: file1: (g=0): rw=randread, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=1 fio-3.7-66-gedfc Starting 1 process read: IOPS=100, BW=400KiB/s (410kB/s)(23.4MiB/60005msec) slat (usec): min=10, max=155, avg=23.24, stdev=16.79 clat (usec): min=2, max=12393, avg=5961.58, stdev=5959.25 lat (usec): min=23, max=12412, avg=5985.91, stdev=5951.92 clat percentiles (usec): | 1.00th=[ 3], 5.00th=[ 3], 10.00th=[ 4], 20.00th=[ 4], | 30.00th=[ 4], 40.00th=[ 5], 50.00th=[ 47], 60.00th=[11863], | 70.00th=[11994], 80.00th=[11994], 90.00th=[11994], 95.00th=[11994], | 99.00th=[11994], 99.50th=[11994], 99.90th=[12125], 99.95th=[12125], | 99.99th=[12387] Signed-off-by:Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056543 ("Missing break in switch") Addresses-Coverity-ID: 1056544 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Bart Van Assche authored
Several block drivers call alloc_disk() followed by put_disk() if something fails before device_add_disk() is called without calling blk_cleanup_queue(). Make sure that also for this scenario a request queue is dissociated from the cgroup controller. This patch avoids that loading the parport_pc, paride and pf drivers triggers the following kernel crash: BUG: KASAN: null-ptr-deref in pi_init+0x42e/0x580 [paride] Read of size 4 at addr 0000000000000008 by task modprobe/744 Call Trace: dump_stack+0x9a/0xeb kasan_report+0x139/0x350 pi_init+0x42e/0x580 [paride] pf_init+0x2bb/0x1000 [pf] do_one_initcall+0x8e/0x405 do_init_module+0xd9/0x2f2 load_module+0x3ab4/0x4700 SYSC_finit_module+0x176/0x1a0 do_syscall_64+0xee/0x2b0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by:
Alexandru Moise <00moses.alexander00@gmail.com> Fixes: a063057d ("block: Fix a race between request queue removal and the block cgroup controller") # v4.17 Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Alexandru Moise <00moses.alexander00@gmail.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
This new function will be used in a later patch to verify whether a queue has been dissociated from the cgroup controller before being released. Signed-off-by:
-
Bart Van Assche authored
Commit 12f5b931 ("blk-mq: Remove generation seqeunce") removed the only seqcount_t and u64_stats_sync instances from <linux/blkdev.h> but did not remove the corresponding #include directives. Since these include directives are no longer needed, remove them. Signed-off-by:
-
Jianchao Wang authored
Currently, we count the hctx as active after allocate driver tag successfully. If a previously inactive hctx try to get tag first time, it may fails and need to wait. However, due to the stale tag ->active_queues, the other shared-tags users are still able to occupy all driver tags while there is someone waiting for tag. Consequently, even if the previously inactive hctx is waked up, it still may not be able to get a tag and could be starved. To fix it, we count the hctx as active before try to allocate driver tag, then when it is waiting the tag, the other shared-tag users will reserve budget for it. Reviewed-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
-
Greg Edwards authored
In commit ed996a52 ("block: simplify and cleanup bvec pool handling"), the value of the slab index is incremented by one in bvec_alloc() after the allocation is done to indicate an index value of 0 does not need to be later freed. bvec_nr_vecs() was not updated accordingly, and thus returns the wrong value. Decrement idx before performing the lookup. Fixes: ed996a52 ("block: simplify and cleanup bvec pool handling") Signed-off-by:
Greg Edwards <gedwards@ddn.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "This should be the last round of NVMe updates before the 4.19 merge window opens. It conatins support for write protected (aka read-only) namespaces from Chaitanya, two ANA fixes from Hannes and a fabrics fix from Tal Shorer." * 'nvme-4.19' of git://git.infradead.org/nvme: nvme-fabrics: fix ctrl_loss_tmo < 0 to reconnect forever nvmet: add ns write protect support nvme: set gendisk read only based on nsattr nvme.h: add support for ns write protect definitions nvme.h: fixup ANA group descriptor format nvme: fixup crash on failed discovery
-
Shenghui Wang authored
Remove the tailing backslash in macro BTREE_FLAG in btree.h Signed-off-by:
-
Shenghui Wang authored
The pr_err statement in the code for sysfs_attatch section would run for various error codes, which maybe confusing. E.g, Run the command twice: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach [the backing dev got attached on the first run] echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach In dmesg, after the command run twice, we can get: bcache: bch_cached_dev_attach() Can't attach sda6: already attached bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\ a8df5e8be891 : cache set not found The first statement in the message was right, but the second was confusing. bch_cached_dev_attach has various pr_ statements for various error codes, except ENOENT. After the change, rerun above command twice: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \ /sys/block/bcache0/bcache/attach In dmesg we only got: bcache: bch_cached_dev_attach() Can't attach sda6: already attached No confusing "cache set not found" message anymore. And for some not exist SET-UUID: echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be898 > \ /sys/block/bcache0/bcache/attach In dmesg we can get: bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\ a8df5e8be898 : cache set not found Signed-off-by: -
Coly Li authored
Commit b1092c9a ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9a ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by:
Kai Krakow <kai@kaishome.de> Tested-by:
Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by:
-
Coly Li authored
This patch tries to add code comments in bset.c, to make some tricky code and designment to be more comprehensible. Most information of this patch comes from the discussion between Kent and I, he offers very informative details. If there is any mistake of the idea behind the code, no doubt that's from me misrepresentation. Signed-off-by:
-
Coly Li authored
This patch updates code comment in bch_keylist_realloc() by fixing incorrected function names, to make the code to be more comprehennsible. Signed-off-by:
-
Coly Li authored
This patch updates the code comment in struct cache with correct array names, to make the code to be more comprehensible. Signed-off-by:
-
Coly Li authored
This patch adds a line of code comment in super.c:register_bdev(), to make code to be more comprehensible. Signed-off-by:
-
