- 06 Oct, 2023 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== i40e: House-keeping and clean-up Ivan Vecera says: The series makes some house-keeping tasks on i40e driver: Patch 1: Removes unnecessary back pointer from i40e_hw Patch 2: Moves I40E_MASK macro to i40e_register.h where is used Patch 3: Refactors I40E_MDIO_CLAUSE* to use the common macro Patch 4: Add header dependencies to <linux/avf/virtchnl.h> Patch 5: Simplifies memory alloction functions Patch 6: Moves mem alloc structures to i40e_alloc.h Patch 7: Splits i40e_osdep.h to i40e_debug.h and i40e_io.h Patch 8: Removes circular header deps, fixes and cleans headers Patch 9: Moves DDP specific macros and structs to i40e_ddp.c * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: Move DDP specific macros and structures to i40e_ddp.c i40e: Remove circular header dependencies and fix headers i40e: Split i40e_osdep.h i40e: Move memory allocation structures to i40e_alloc.h i40e: Simplify memory allocation functions virtchnl: Add header dependencies i40e: Refactor I40E_MDIO_CLAUSE* macros i40e: Move I40E_MASK macro to i40e_register.h i40e: Remove back pointer from i40e_hw structure ==================== Link: https://lore.kernel.org/r/20231005162850.3218594-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect netdev->name to be NUL-terminated based on its use with format strings and dev_info(): | dev_info(&adapter->pdev->dev, | "%s link is up %d Mbps %s\n", | netdev->name, adapter->link_speed, | adapter->link_duplex == FULL_DUPLEX ? | "full duplex" : "half duplex"); Furthermore, NUL-padding is not required as netdev is already zero-initialized through alloc_etherdev(). Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
Justin Stitt <justinstitt@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-atheros-atlx-atl2-c-v1-1-493f113ebfc7@google.comSigned-off-by:
-
Justin Stitt authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. It should be noted that there doesn't currently exist a bug here as DRV_NAME is a small string literal which means no overread bugs are present. Also to note, other ethernet drivers are using strscpy in a similar pattern: | dec/tulip/tulip_core.c | 861: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); | | 8390/ax88796.c | 582: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); | | dec/tulip/dmfe.c | 1077: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); | | 8390/etherh.c | 558: strscpy(info->driver, DRV_NAME, sizeof(info->driver)); Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90Signed-off-by:
Lukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-asix-ax88796c_ioctl-c-v1-1-6fafdc38b170@google.comSigned-off-by:
-
Linus Walleij authored
As we don't specify the MTU in the driver, the framework will fall back to 1500 bytes and this doesn't work very well when we try to attach a DSA switch: eth1: mtu greater than device maximum ixp4xx_eth c800a000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead After locating an out-of-tree patch in OpenWrt I found suitable code to set the MTU on the interface and ported it and updated it. Now the MTU gets set properly. Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231005-ixp4xx-eth-mtu-v4-1-08c66ed0bc69@linaro.orgSigned-off-by:
-
Harini Katakam authored
Since there's no alternate driver, change this entry from obsolete to orphan. Signed-off-by:
Harini Katakam <harini.katakam@amd.com> Link: https://lore.kernel.org/r/20231005131039.25881-1-harini.katakam@amd.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-10-05 The first patch is by Miquel Raynal and fixes a comment in the sja1000 driver. Vincent Mailhol contributes 2 patches that fix W=1 compiler warnings in the etas_es58x driver. Jiapeng Chong's patch removes an unneeded NULL pointer check before dev_put() in the CAN raw protocol. A patch by Justin Stittreplaces a strncpy() by strscpy() in the peak_pci sja1000 driver. The next 5 patches are by me and fix the can_restart() handler and replace BUG_ON()s in the CAN dev helpers with proper error handling. The last 27 patches are also by me and target the at91_can driver. First a new helper function is introduced, the at91_can driver is cleaned up and updated to use the rx-offload helper. * tag 'linux-can-next-for-6.7-20231005' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (37 commits) can: at91_can: switch to rx-offload implementation can: at91_can: at91_alloc_can_err_skb() introduce new function can: at91_can: at91_irq_err_line(): send error counters with state change can: at91_can: at91_irq_err_line(): make use of can_change_state() and can_bus_off() can: at91_can: at91_irq_err_line(): take reg_sr into account for bus off can: at91_can: at91_irq_err_line(): make use of can_state_get_by_berr_counter() can: at91_can: at91_irq_err(): rename to at91_irq_err_line() can: at91_can: at91_irq_err_frame(): move next to at91_irq_err() can: at91_can: at91_irq_err_frame(): call directly from IRQ handler can: at91_can: at91_poll_err(): increase stats even if no quota left or OOM can: at91_can: at91_poll_err(): fold in at91_poll_err_frame() can: at91_can: add CAN transceiver support can: at91_can: at91_open(): forward request_irq()'s return value in case or an error can: at91_can: at91_chip_start(): don't disable IRQs twice can: at91_can: at91_set_bittiming(): demote register output to debug level can: at91_can: rename struct at91_priv::{tx_next,tx_echo} to {tx_head,tx_tail} can: at91_can: at91_setup_mailboxes(): update comments can: at91_can: add more register definitions can: at91_can: MCR Register: convert to FIELD_PREP() can: at91_can: MSR Register: convert to FIELD_PREP() ... ==================== Link: https://lore.kernel.org/r/20231005195812.549776-1-mkl@pengutronix.deSigned-off-by:
-
Sascha Hauer authored
This implements the led_hw_* hooks to support hardware blinking LEDs on the DP83867 phy. The driver supports all LED modes that have a corresponding TRIGGER_NETDEV_* define. Error and collision do not have a TRIGGER_NETDEV_* define, so these modes are currently not supported. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> #TQMa8MxML/MBa8Mx Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct flow_action_entry. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct packet_fanout. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Anqi Shen <amy.saq@antgroup.com> Cc: netdev@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
-
Jakub Kicinski authored
Chuck points out that we should use the uapi-header property when generating the guard. Otherwise we may generate the same guard as another file in the tree. Tested-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Control the order of blocks in ACL region Amit Cohen writes: For 12 key blocks in the A-TCAM, rules are split into two records, which constitute two lookups. The two records are linked using a "large entry key ID". Due to a Spectrum-4 hardware issue, KVD entries that correspond to key blocks 0 to 5 of 12 key blocks will be placed in the same KVD pipe if they only differ in their "large entry key ID", as it is ignored. This results in a reduced scale, we can insert less than 20k filters and get an error: $ tc -b flower.batch RTNETLINK answers: Input/output error We have an error talking to the kernel To reduce the probability of this issue, we can place key blocks with high entropy in blocks 0 to 5. The idea is to place blocks that are often changed in blocks 0 to 5, for example, key blocks that match on IPv4 addresses or the LSBs of IPv6 addresses. Such placement will reduce the probability of these blocks to be same. Mark several blocks with 'high_entropy' flag and place them in blocks 0 to 5. Note that the list of the blocks is just a suggestion, I will verify it with architects. Currently, there is a one loop that chooses which blocks should be used for a given list of elements and fills the blocks - when a block is chosen, it fills it in the region. To be able to control the order of the blocks, separate between searching blocks and filling them. Several pre-changes are required. Patch set overview: Patch #1 marks several blocks with 'high_entropy' flag. Patches #2-#4 prepare the code for filling blocks at the end of the search. Patch #5 changes the loop to just choose the blocks and fill the blocks at the end. ==================== Signed-off-by: -
Amit Cohen authored
The previous patches prepared the code to allow separating between choosing blocks and filling blocks. Do not add blocks as part of the loop that chooses them. When all the required blocks are set in the bitmap 'chosen_blocks_bm', start filling blocks. Iterate over the bitmap twice - first add only blocks that are marked with 'high_entropy' flag. Then, fill the rest of the blocks. The idea is to place key blocks with high entropy in blocks 0 to 5. See more details in previous patches. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Currently, mlxsw_afk_picker() chooses which blocks will be used for a given list of elements, and fills the blocks during the searching - when a key block is found with most hits, it adds it and removes the elements from the count of hits. This should be changed as we want to be able to choose which blocks will be placed in blocks 0 to 5. To separate between choosing blocks and filling blocks, several pre-changes are required. Currently, the indication of whether all elements were found in the chosen blocks is by the structure 'key_info->elusage'. This structure is updated when block is filled as part of mlxsw_afk_picker_key_info_add(). A following patch will call this function only after choosing all the blocks. Add a bitmap called 'elusage_chosen' to store which elements were chosen in the chosen blocks. Change the condition in the loop to check elements that were chosen, not elements that were already filled in the blocks. Signed-off-by:
-
Amit Cohen authored
Currently, mlxsw_afk_picker() chooses which blocks will be used for a given list of elements, and fills the blocks during the searching - when a key block is found with most hits, it adds it and removes the elements from the count of hits. This should be changed as we want to be able to choose which blocks will be placed in blocks 0 to 5. To separate between choosing blocks and filling blocks, several pre-changes are required. During the search, the structure 'mlxsw_afk_picker' is used per block, it contains how many elements from the required list appear in the block. When a block is chosen and filled, this bitmap of elements is cleaned. To be able to fill the blocks at the end, add a bitmap called 'chosen_element' as part of picker. When a block is chosen, copy the 'element' bitmap to it. Use the new bitmap as part of mlxsw_afk_picker_key_info_add(). So later, when filling the block will be done at the end of the searching, we will use the copied bitmap that contains the elements that should be used in the block. Signed-off-by:
-
Amit Cohen authored
Currently, mlxsw_afk_picker() chooses which blocks will be used for a given list of elements, and fills the blocks during the searching - when a key block is found with most hits, it adds it and removes the elements from the count of hits. This should be changed as we want to be able to choose which blocks will be placed in blocks 0 to 5. To separate between choosing blocks and filling blocks, several pre-changes are required. The indexes of the chosen blocks should be saved, so then the relevant blocks will be filled at the end of search. Allocate a bitmap for chosen blocks, when a block is found with most hits, set the relevant bit in the bitmap. This bitmap will be used in a following patch. Signed-off-by:
-
Amit Cohen authored
For 12 key blocks in the A-TCAM, rules are split into two records, which constitute two lookups. The two records are linked using a "large entry key ID". Due to a Spectrum-4 hardware issue, KVD entries that correspond to key blocks 0 to 5 of 12 key blocks A-TCAM entries will be placed in the same KVD pipe if they only differ in their "large entry key ID", as it is ignored. This results in a reduced scale. To reduce the probability of this issue, we can place key blocks with high entropy in blocks 0 to 5. The idea is to place blocks that are changed often in blocks 0 to 5, for example, key blocks that match on IPv4 addresses or the LSBs of IPv6 addresses. Such placement will reduce the probability of these blocks to be same. Mark several blocks with 'high_entropy' flag, so later we will take into account this flag and place them in blocks 0 to 5. Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: conntrack offload for tunnels This series adds support for offloading TC flower rules which require both connection tracking and tunnel decapsulation. Depending on the match keys required, the left-hand-side rule may go in either the Outer Rule table or the Action Rule table. ==================== Signed-off-by: -
Edward Cree authored
When a foreign LHS rule (TC rule from a tunnel netdev which requests conntrack lookup) matches on inner headers or enc_key_id, these matches cannot be performed by the Outer Rule table, as the keys are only available after the tunnel type has been identified (by the OR lookup) and the rest of the headers parsed accordingly. Offload such rules with an Action Rule, using the LOOKUP_CONTROL section of the AR response to specify the conntrack and/or recirculation actions, combined with an Outer Rule which performs only the usual Encap Match duties. This processing flow, as it requires two AR lookups per packet, is less performant than OR-CT-AR, so only use it where necessary. Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Edward Cree authored
There were a few places where no extack error message was set, or the extack was not forwarded to callees, potentially resulting in a return of -EOPNOTSUPP with no additional information. Make sure to populate the error message in these cases. In practice this does us no good as TC indirect block callbacks don't come with an extack to fill in; but maybe they will someday and when debugging it's possible to provide a fake extack and emit its message to the console. Reviewed-by:
-
Edward Cree authored
Normally, if a TC filter on a tunnel netdev does not match on any encap fields, we decline to offload it, as it cannot meet our requirement for a <sip,dip,dport> tuple for the encap match. However, if the rule has a nonzero chain_index, then for a packet to reach the rule, it must already have matched a LHS rule which will have included an encap match and determined the tunnel type, so in that case we can offload the right-hand-side rule. Reviewed-by:
-
Edward Cree authored
Allow a tunnel netdevice (such as a vxlan) to offload conntrack lookups, in much the same way as efx netdevs. To ensure this rule does not overlap with other tunnel rules on the same sip,dip,dport tuple, register a pseudo encap match of a new type (EFX_TC_EM_PSEUDO_OR), which unlike PSEUDO_MASK may only be referenced once (because an actual Outer Rule in hardware exists, although its fw_id is not recorded in the encap match entry). Reviewed-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nh_group. Cc: David Ahern <dsahern@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nh_notifier_grp_info. Cc: David Ahern <dsahern@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: netdev@vger.kernel.org Cc: llvm@lists.linux.dev Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct netlink_policy_dump_state. Additionally update the size of the usage array length before accessing it. This requires remembering the old size for the memset() and later assignments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: netdev@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nfp_eth_table. Cc: Simon Horman <simon.horman@corigine.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Yinjun Zhang <yinjun.zhang@corigine.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Yu Xiao <yu.xiao@corigine.com> Cc: Sixiang Chen <sixiang.chen@corigine.com> Cc: oss-drivers@corigine.com Cc: netdev@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nfp_reprs. Cc: Simon Horman <simon.horman@corigine.com> Cc: oss-drivers@corigine.com Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct disttable. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20231003231823.work.684-kees@kernel.orgSigned-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nh_notifier_res_table_info. Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Tom Rix <trix@redhat.com> Cc: llvm@lists.linux.dev Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nh_res_table. Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
-
Jakub Kicinski authored
Russell King says: ==================== Rework tx fault fixups This series reworks the tx-fault fixup and then improves the Nokia GPON workaround to also ignore the RX LOS signal as well. We do this by introducing a mask of hardware pin states that should be ignored, converting the tx-fault fixup to use that, and then augmenting it for RX LOS. ==================== Link: https://lore.kernel.org/r/ZRwYJXRizvkhm83M@shell.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Improve the Nokia GPON fixup - we need to ignore not only the hardware LOS signal, but also the software implementation as well. Do this by using the new state_ignore_mask to indicate that we should ignore not only the hardware RX_LOS signal, and also clear the LOS bits in the option field. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by:
Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/E1qnfXh-008UDe-F9@rmk-PC.armlinux.org.ukSigned-off-by:
-
Russell King (Oracle) authored
Re-implement how we ignore the hardware TX_FAULT signal. Rather than having a separate boolean for this, use a bitmask of the hardware signals that we wish to ignore. This gives more flexibility in the future to ignore other signals such as RX_LOS. Signed-off-by:
-
- 05 Oct, 2023 8 commits
-
-
Wolfram Sang authored
AR7 is going to be removed from the Kernel, so remove its networking support in form of the cpmac driver. This allows us to remove the platform because this driver includes a platform specific header. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/all/20230922061530.3121-6-wsa+renesas@sang-engineering.com/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts (or adjacent changes of note). Signed-off-by: -
Marc Kleine-Budde authored
Merge patch series "can: at91: add can_state_get_by_berr_counter() helper, cleanup and convert to rx_offload" Marc Kleine-Budde <mkl@pengutronix.de> says: This series first introduces the can_state_get_by_berr_counter() helper function. It returns the current TX and RX state depending on the provided CAN bit error counters. It will be later used by the at91_can driver. The remaining patches of this series first clean up the at91_can driver, clean up the bus- and line error (including bus-off) handling, and then convert it use the rx_offload helper. The driver works better under high system load and the order of received CAN frames is better maintained. Due to a hardware limitation the converted driver could trigger a race condition in the can_restart() CAN bus-off handler. The patch series [1] fixes the issue. [1] https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-0-91b5c1fd922c@pengutronix.de Changes in v2: - 1/27: can_state_err_to_state(): use symbolic error values instead of plain numbers (Thanks Vincent) - 27/27: fix patch description and typos (Thanks Vincent) - Link to v1: https://lore.kernel.org/all/20231004-at91_can-rx_offload-v1-0-c32bf99097db@pengutronix.de Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-0-9987d53600e0@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The current at91_can driver uses NAPI to handle RX'ed CAN frames, the RX IRQ is disabled and a NAPI poll is scheduled. Then in at91_poll_rx() the RX'ed CAN frames are tried to read in order from the device. This approach has 2 drawbacks: - Under high system load it might take too long from the initial RX IRQ to the NAPI poll function to run. This causes RX buffer overflows. - The algorithm to read the CAN frames in order is not bullet proof and may fail under certain use cases/system loads. The rx-offload helper fixes these problems by reading the RX'ed CAN frames in the interrupt handler and adding it to a list sorted by RX timestamp. This list of RX'ed SKBs is then passed to the networking stack via NAPI. Convert the RX path to rx-offload, pass all CAN error frames with can_rx_offload_queue_timestamp(). Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-27-9987d53600e0@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
This is a preparation patch to convert the driver to make use of the rx-offload helper. With rx-offload the received CAN frames are sorted by their timestamp. Regular CAN RX'ed and TX'ed CAN frames are timestamped by the hardware. Error events are not. Introduce a new function at91_alloc_can_err_skb() the allocates an error SKB and reads the current timestamp from the controller. Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-26-9987d53600e0@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
Since 3e5c291c ("can: add CAN_ERR_CNT flag to notify availability of error counter") there is a dedicated flag to inform the user space, that there are CAN error counters in the CAN error frame. In case the device is not in bus off mode, send the error counters to user space and set CAN_ERR_CNT. Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-25-9987d53600e0@pengutronix.deSigned-off-by:
-
Marc Kleine-Budde authored
The driver implements a hand crafted CAN state handling. Update the driver to make use of can_change_state(), introduced in ("can: dev: Consolidate and unify state change handling") Also switch from hand crafted CAN bus off handling to can_bus_off(): In case of a bus off, abort all pending TX requests, switch off the device and let can_bus_off() handle the device restart. Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-24-9987d53600e0@pengutronix.deSigned-off-by: -
Marc Kleine-Budde authored
The at91 CAN controller automatically recovers from bus-off after 128 occurrences of 11 consecutive recessive bits. After an auto-recovered bus-off, the error counters no longer reflect this fact. On the sam9263 the state bits in the SR register show the current state (based on the current error counters), while on sam9x5 and newer SoCs these bits are latched. Take any latched bus-off information from the SR register into account when calculating the CAN new state, to start the standard CAN bus off handling. Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-23-9987d53600e0@pengutronix.deSigned-off-by:
-
